Wireless printing capability lost after the recent HP auto update. Laptop is HP Pavilion dv5t.

Similar Questions

• OfficeJet 6500: wireless printing capability lost with 10 Windows

  I recently updated two laptop computers for windows 10.  Initially, the two were able to connect wirelessly to my printer Officejet 6500.  Both have lost this ability after two weeks.  A third bought with windows installed 10 also connected wireless laptop at first but has lost this ability.  The pc seems to think that the printer is offline or disconnected or turned off.  I downloaded the latest software of the printer and the installation cannot find the printer or does not accept the IP address on the Configuration Page of HP (192.168.1.4) network.  Network diagnostic stage think that the printer's IP address is 169.254.204.249.  Turn on the printer and does not solve the problem.  HP Print and doctor Scan was without help.  Printer has full function when it is connected via a USB cable.  I tried most of the recommendations I could find, but none helped.

  Just an update.  The problem is solved itself.  All three laptops found a wireless connection to the printer without additional action by myself.

• Problems of authentication of wireless with Linksys router after the recent updates

  No authenicate password for wireless connection

  Problem solved once the computer has been restarted two times, first time we just restarted it and same problem, second time stop and started them it authenicated normally. My other computers on the network worked well once the updates, just a computer that would keep asking password of the router, if you put it in the right pair invite just, once again, if you enterd in incorrect password, it would bring a window (incorrect password). The installed updates were KB981322 KB2347290, KB975558 KB905866 KB2141007.

• HP 8600 pro failsto print from computer after the new firm ware update

  Hi my hp printer was working well just had troble grabbing hp photo paper

  work collapsed

  got update firm ware installed

  has worked for 3 days maby habit now printed computer

  I can import scans and print as a copper very well but acept used a job from the computer

  IM hard wired

  Thanks in advance

  j

  Hello Pshop_x_fract,

  Welcome to the HP Forums! I understand your concerns. How is the printer connected? USB or wireless?

  Print these pictures of what program?

  What is your operating system on your computer? Windows or Mac?

  The crucial step in the printing of the pictures change print settings within the program you are printing from. Please follow this HP document on change of the size of the Type and Source parameters by default, paper. (It is only for a Windows computer).

  Please send me your troubleshooting steps.

• How to repair BSOD bccode 116 after the recent windows 7 updates this week

  Hello

  This is my first time to ask your question here, please be patient if I make a mistake in the Protocol.
  After that massive Windows Update this week, my laptop Acer AO725 has had trouble waking mode standby, often gives me an error BSOD (bccode 116). I read through other entries of forum on issues with video drivers, but it just got a common question after updates. I have installed a new material during this time, and the only new software that I installed was a registry cleaner today after several days of this problem to happen.
  May updates caused the problem and if so, how should I do? Does anyone have any troubleshooting tips? It is very annoying to deal with and hope that there is a solution that is not very difficult.

  Here are the stats from my system and 2 on bccode 116 recent error messages.

  Thanks in advance for any help or suggestion,

  Nathan Ellingwood

  Acer laptop computer AO725
  Windows 7 64-bit OS SP1
  APU AMD C-60 with graphics Radeon HD 1.00 GHz
  4 GB OF RAM

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode:                                               116

  BCP1: FFFFFA8005F3A010

  BCP2: FFFFF880040DF8F0

  BCP3: 0000000000000000

  BCP4: 0000000000000002

  OS version: 6_1_7601

  Service Pack: 1_0

  Product:                                               768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\111712-20217-01.dmp

  C:\Users\nellingwood\AppData\Local\Temp\WER-57704-0.SysData.XML

  Read our privacy statement online:

   http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode:                                               116

  BCP1: FFFFFA80036A2010

  BCP2: FFFFF880040578F0

  BCP3: 0000000000000000

  BCP4: 0000000000000002

  OS version: 6_1_7601

  Service Pack: 1_0

  Product:                                               768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\111712-20950-01.dmp

  C:\Users\nellingwood\AppData\Local\Temp\WER-64662-0.SysData.XML

  Read our privacy statement online:

   http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  OK two things, first off I just is down to the phone with Alienware support and solved the problem (or so it seems for now barely made this 45 minutes ago) and explain the solution in a minute.

  -I was not overclocking. I just received my office yesterday and had no time to mess with that yet.

  -J' was started in safe mode and uninstalled the graphics driver and reinstalled. has restarted hollow all my system event records and found the newspaper which says that have been forced.

  Finally, I called Alienware from Dell support. Talked to a tech and it was a simple as a switch setting in my BIOS.

  I have an Alienware Aurora R4:

  -FIX - restart your computer, press F2 to enter the settings. Go to the "Advanced" tab and select "Integrated peripherals" there is something in the sense of "3gen' with the graphics (don't remember what this option was exactly) but that disable.

  as simple as that.

• Renderer missing after the recent update

  Hello

  I use Adobe CS5 on a 64-bit computer to Windows 7 with 12 GB of RAM. Even though I have a Quadro CX. the CS5 first complains that he cannot use the Mercury Playback Engine the GPU acceleration. It happened after the recent update to CS5. I checked the contents of the cuda_supported_cards.txt file and there seems to be no problem at all. I'm lost. Any kind of help will be appreciated.

  

  Try to update your video card driver.

• After the recent update to iTunes, my computer is not recognized in iTunes game.

  After the recent update to iTunes, my computer is not recognized in iTunes game.  I am subscribed to iTunes game. My library shows the status of iCloud, and yet when I go into the Match iTunes from the iTunes store, it asks if I want to add this computer.  When I connect and ask the computer to add, nothing happens.  Shouldn't iTunes recognize my that my computer is a Subscriber?

  Hello

  Connect to iTunes. Go to Menu > iTunes > Preferences > general and make iCloud sure music library is checked.

  Jim

• Is it possible to restore the realization of streak of moving after the recent update of watch?

  Is it possible to restore the realization "streak more long movement" after the recent update of watch (v2.2)?   I had a streak of 44 moving goes when I updated the watch (04/04/16).  After the update, although I continue to exceed my goal of moving, I no longer get the prize for the longest series of moving.  Data are always available in the watch (I can see all complete circles).

  Hello

  While it may be that for any other achievements being credited, may be useful for the future allocation of achievements to close open applications on your iPhone and then restart your iPhone and your watch:

  • To close open applications on your iPhone: click twice on the Home button, and then drag upward on each preview of the app.
  • Both devices turn off together, and then restart your iPhone first:
    • To turn off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off.
    • To reactivate: press and hold the side button until you see the Apple logo.

• My apple ID became invalid after the recent upgrade to ios 9.3

  My apple ID became invalid after the recent upgrade to ios 9.3. What can I do to reactivate the ID? I tried to reset my password several times even.

  For now, I am unable to pay for anything because I can't access the function of apple on the phone pay.

  Hello

  Follow the instructions here, include a link to get help from Apple with your Apple ID:

  If your identifier Apple is locked - Apple supports

• Satellite 100-192: questions after the recent MS update...

  Satellite 100-192.

  After the recent MS update I had the problem with the Realtek sound card driver. I solved it by applying the hotfix provided MS.

  Now the problem is that the disk cleanup utility does not launch. Anyone any idea?

  I just found out that my disk cleanup utility would not work due to a free program called Photo Toolkit. Although it is a nice little program for quickly editing photos, apparently it causes such problems when it is loaded.

• Help! MicrosoftOffice 2011 cannot open the files after the recent update

  After the recent update (security 2015-006, Mac OS 10.10.5, Yosemite), I can longer open all files in Microsoft Excel or Word.

  When I tried to open the files in the "Open recent" list, Excel reports "Excel cannot open the workbook. The file name or path contains invalid characters (for example, /). "Same error message appears when I go into the folder and open the file in Excel.

  When I tried to open an existing file of the word, he pointed out that "this is not a valid file name.

  PS: Please do not suggest you use everything as your other favorite programs.

  Click the folder just below the recent and see if documents are on my Mac. Additionally, click on a reader-Documents-then the file name and see if the same thing happens. I downloaded the update of security on the App Store and have no problem. Also, in your menu bar, go to help in the Office applications and updates. An Office 2016 update was released last Friday, December 11.

• Get an error 'he cannot read the file' in Windows media player after the recent bios update

  * Original title: windows media player cannot play the files after the recent bios update

  I installed the latest update of the bios on my Hewlett Packard Windows 7 and now windows media player comes up with an error message saying that it cannot read the file for each file that he used to play.  Is it possible to uninstall and reinstall windows media player separately from windows?  or y at - it a file update or repair that I can download to make it work again.  I don't get a codec error.

  Hello

  1. What is the full error message?

  2. What is the number of KB of the update of the Bios?

  Please follow the steps below and get back to us with the results.

  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/is-is/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Uninstall and reinstall Windows Media Player.

  Step 1: Uninstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Player.
  d. restart the computer

  Step 2: Reinstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of Windows Media Player.
  d. restart the computer and check with the question.

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I would say that you can download the last packs of codec for Windows Media Player to the Internet and check out them. Make a search using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know if it helps!

• Can't see the video after the first/Adobe CC update?

  Hi all-

  I know it might sound like a repetitive question, however I am confused through the forums and found no resolution to my current problem.

  I have used as my software video editing Adobe Premiere Pro CC for a year and have enjoyed the experience until a problem happened, I think after the recent updates to my first installation.

  I can't see one of the video for the projects that I work on, past and present - only audio.

  The original files play without problem in any available media player (windows, VLC, etc.). the projects I created in first time before you no longer see any video in the source monitor or project...

  I converted the. I am currently trying to work with MOV files. AVI through a .bat file through VLC, but I'm still without success.

  everyone knows about this problem?

  PC running windows 10 and exceeds the specification of min for Adobe premiere. This particular video file was captured with a contour HD POV camera (as much of the video I captured and published first in the past.)

  the. MOV codec is H264 - MPEG - 4 AVC (part 10) (avc1)

  Resolution 1280 x 738

  Screen resolution: 1280 x 720

  Frame rate: 59.940059

  Decoded format: Planar 4: 2:0 YUV

  I've deleted and reinstalled first pro CC and assured me that all CC content that may apply is up to date.

  Can someone point me in the direction of a patch? or more information I can include that could help me understand my problem? your help is greatly appreciated.

  Thank you very much.

  Justin D

  It seems that your computer has NVIDIA GeForce GTX 950 M + Intel HD 4600 Graphics embedded.

  Try this:

  Go to Device Manager > graphics and disable Intel HD graphics cards. That could solve the problem!

  Thank you

  Regalo

• After the September 2016 ioS update my iphone or my ipad are more recognized on my laptop

  After the September 2016 ioS update my iphone or my ipad are more recognized on my laptop

  What do you mean on your laptop more?  Please provide details.

  Best,

  GDG

• My apple pencil does not work after the 9.3.4 update.

  My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.

  < re-titled by host >

  Greetings RechargeableJam,

  Welcome to the communities of Apple Support!

  I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.

  First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:

  Force a nearby application on your iPhone, iPad or iPod touch

  Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.

  Best regards.