wireless radio has stopped working - HP PhotoSmart C7280

My wireless connection has begun to fall suddenly after 2 years.  I made no changes to my system.  I did the 6 # and # 9 and now I can't even all a wireless connection. It just says: my wireless radio does not work.

Turn the printer off.  Hold it # and 6 keys all on again.  If this does not work, try # and 9 keys.

Tags: HP Printers

Similar Questions

  • Your wireless card has stopped working properly.

    Often, I receive this message "problem reports and solution:
    A problem with your wireless network card

    Your wireless card has stopped working properly.
    There is a network adapter that allows your computer to connect to a wireless network.
    To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

    Even if I get this message that I am able to connect to wireless internet. I checked on the DELL website, and according to them, I have the driver for my Inspiron 1520 then I would like to know how I can stop this annoying message that appear all the time? Is there an updated driver that I don't know?
    The problem refers to my Dell Wireless 1390 WLAN Mini-Card (Driver version 4.170.25.17)

    I would be grateful for any advice.
    Thanks in advance.

    Hi dtw1970,

    While I was researching online error message met that it is a known issue on dell computers and there are a few steps available in the dell Web site.

    Check the link and try the steps mentioned below.
    http://en.community.Dell.com/forums/p/19094058/19217044.aspx#19217044

    You can also try posting your query in the Dell Community, see the link below.
    http://en.community.Dell.com/

    I hope this helps!

    Halima S - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • HP touchsmart IQ775 Wireless mouse has stopped working.

    Wireless mouse has stopped working. I have a HP Touchsmart IQ775 so I can touch the screen to navigate. did a restore of the system in SafeMode this morning and everything works fine now, but of course, it happens again. Last week, the computer did an update to quicktime which disabled, so I had to completely uninstall quicktime and the mouse immediately worked. looked but could not find that whatever this is updated overnight to re - train the problem this morning. However, the system closed and said 'power system failure driver' cannot know how to fix this, all say updated mouse drivers. is associated it with? This not computer savvy, usually google problems on my ipod touch and looking and staring at me but were not able to understand this. Thanks for all the tips

    Hello

    HP also has their own update so he could be there?

    I would stop automatic driver updates, because they are often older certified and MS is far behind.

    If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
    This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
    questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
    manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
    ------------------------------------------------------

    This, to erase corruption and missing/damaged file system repair or replacement.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Try to run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------

    Also check with HP support and forums.

    HP support
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • sMy Microsoft UDB wireless mouse has stopped working. Can it be repaired or is it just did.

    My Microsoft 3000 wireless optical USB mouse has stopped working.  Can it be repaired or is it just did.

    Hello

    -Don't you make changes to your computer because of which the question began?

    I would recommend that you follow the steps in this article and see if they help.

    Troubleshoot the incidents of the response to the mouse or wireless keyboard

  • my wireless mouse has stopped working

    I have two mouse Microsoft Wireless in the 3500 Series and 4000 series, I had the 4000 first order works now my 3500 has stopped working can help a whole?

    Hi Richard,

    Here are a few troubleshooting steps that you can try to solve this problem.


    Method 1: Run the Microsoft fixit tool and check.

    Hardware devices do not work or are not detected in Windows:

    http://support.Microsoft.com/mats/hardware_device_problems

    If the method above does not work, proceed to the next method.

    Method 2: Refer to the suggestions for the following links.
    Troubleshoot a wireless mouse that does not correctly

    http://support.Microsoft.com/kb/321122

    Troubleshoot the incidents of the response to the mouse or wireless keyboard

    http://support.Microsoft.com/kb/838398

    If you have additional questions, or if this problem persists, come in and we will be happy to help you.

  • All of a sudden my wireless mouse has stopped working. The mouse is on and relatively new.

    Tonight my mouse (Logitech) wireless has stop working.  This happened once, and one of my friends told me to remove the receiver, shut my computer down and put the mouse back in.  However, I don't remember the exact steps he gave me.   I tried several different things, but none seems not to work.

    Hello

    What is the model number of the mouse?

    Method 1:

    I suggest you run the Microsoft fixit tool and check.

    Hardware devices do not work or are not detected in Windows:

    http://support.Microsoft.com/mats/hardware_device_problems/

    Method 2:

    Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more

    http://support.Microsoft.com/ph/7746

    Method 3:

    Mouse, touchpad and keyboard with Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=Tab03

    I would suggest you also contact the Logitech support forum and check.

    http://www.Logitech.com/en-us/support

  • Your wireless card has stopped working properly, because a compatible driver is not available for this version of Windows.

    I'm not very tech-savvy... like everything. So I have no idea what to do on this subject, but the problem is very irritating because my wireless just randomly stops working for a short period of time, and it happens quite often. Does anyone have any suggestions?

    My computer told me to go to the website of Buffalo, but I had no idea what to do from there.

    Hi Chadbassett,

    Thank you to contact the community Microsoft and we will be happy to help you with your concern.

    According to the description provided, I understand that you are facing a problem connecting to the wireless network.

    He would be grateful if you can answer this question in order to help you further.

    1. have you made changes on the computer before this problem?

    2. What is the brand and model of your computer?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    Run the windows network troubleshooter, and check if it helps.

    Using the troubleshooter from network in Windows 7: http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7

    Method 2:

    I suggest you to download and install the latest drivers wireless in the factory.

    Note: If the drive is not compatible with windows 7, I recommend you to install the driver software in compatibility mode and check if that helps.

    Windows 7 Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx

    Make older programs in this version of Windows: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows

    Reference:

    Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

    We would be more than happy to help you if the steps above did not solve the problem.

  • My Apple wireless mouse has stopped working.

    Initially, software system warned me that the batteries are low.  Then it stopped working completely.  I replaced with new(tested good) AA batteries and the mouse still does not connect to my iMac. 10.11.3 is updated software.  My trackpad works ok so the BT Service is always good. I even tried an another Apple wireless mouse and it doesn't connect either.  Can an optical mouse as this just failure?

    A mouse can not just, indeed at the end of his life he cannot do anything else.   I think that your first test is to hold the mouse upside down and check if you have a green light display.    If so, the batteries are probably ok.   If the light flashes, it is most likely, connections are at fault.   Clean the inside of the battery carefully in case there is any residue of previous batteries.   Clean your battery connections and try again.   You could also try your mouse (indeed, two of them) with another computer, maybe a friend.   It doesn't matter if it's a pc.   That will confirm the effectiveness of the mouse.

    Magic Mouse 2 has been designed and developed for El Capitan (10.11.3)... so old mice may not work as well, but I have yet to hear any complaints.

  • my microsoft wireless mouse has stopped working, I replaced battery

    my wireless mouse was fine and then stopped working. I changed the batteries and it seemed to work and then arrested again.

    Hello

    I suggest you to follow the steps in this link and check if it helps:

    http://support.Microsoft.com/kb/838398

  • V470 blue tooth wireless mouse has stopped working

    My Logitech v470 blue tooth mouse worked but stopped.  I went online and downloaded the latest version of the software.  The machine started to work.  I used for1.5 days and on the second day, all of a sudden, it stopped working.  All diagnoses that I know say it works.  The blue light comes on when I press the search button but never connects.  The computer says, the device works, but it does not.  Please help since the pad on my laptop is more sensitive (opens instead of allowing me to do some drag on the desktop) and I need the mouse to work around the touchpad.

    Hello

    read these tutorials on how to set up bluetooth

    http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

    Here are solutions to some common problems with Bluetooth devices.

    You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

    If the above does not correct this contact Logitech

  • HP P1102W WIRELESS PRINTING HAS STOPPED WORKING

    Our P1102W lost the wi - fi connection and we cannot get it back.  Seems to be a printer WiFi issue.

    It is one of two HP printers (other is a 5510) using a wifi network at home (WPA2, w/password), accessible by a Dell laptop and an Apple MacBook AIr (mines).  Two computers can access the 5510.  Both lost the P1102W.

    The blue network on the P1102W is no longer regularly lights up.  By pressing the button on the P1102W wireless accomplishes nothing.  Electric bike achieves nothing (but used).  Moving the printer does not help.  P1102w works fine on USB key.

    We tried to reset the Modem and the router. No change.

    We have reinstalled the software. No change.

    We tried to run the instructions from HP to make the printer wireless using Printer HTML Config Utility, but there page does not load in Safari. (Very frustrating).

    Self test shows

    Firmwarer Datacode 20120814

    Version of the driver software = 20091104

    State of the information network not connected

    Hardware address = 00:00:00:00:00:00

    IPv4 = 0.0.0.0

    Subnet mask = 0.0.0.0

    default gateway = 0.0.0.0

    Hello name =

    802. 11 b / g wireless

    Status = active

    Comm mode = invest

    Name the network SSID = myuniquenetworkname

    = WPA/WPA2 authentication

    IP configured by = manual

    Server DHCP/BOOTP = 0.0.0.0

    0.0.0.0 WINS server

    Printing of pages = 6218 so far

    Hi @maddog8212 ,

    I see that you have lost connection with the P1102w wireless. I will definitely do my best to help you.

    I would like to reset the printer first to clear the previous network settings.
    Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

    Print a configuration report and check the SSID address and IP are disabled.
    Print a Configuration Page.

    Plug the USB cable from the printer to the computer.

    I have provided Windows and Mac steps, you can choose how you want to set up the printer again.

    Windows as follows:

    Run the Wireless Setup to set up the printer on the network again.

    Go to start, all programs, HP, HP Laserjet P1102w, then select Wireless Network Configuration.

    Steps to configure the wireless.

    Then, unplug the USB cable.

    Test the printer.

    Mac as follows: (since you mentioned that you had the HTML option for your Mac)

    Make sure that Safari is set as default browser. (sometimes the SAP will not open if it is not set by default)

    Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

    Close all applications.

    In the Apple menu bar, click Go, computer, MAC hard drive, library, Printers, HP, LaserJet, click the folder for your printer, click browser EWS or HTML config, it should open the webserver integrated for the printer to set up the wireless, and then click the network tab, click on wireless on the left and fill out your information. (be sure to infrastructure is selected and alpha or numeric is selected) Apply the settings.

    You should get a solid blue light on the printer in 1 minute about.

    Remove the USB driver, then add the network printer:

    Click on the Apple.
    Click on System Preferences.

    Click the printing and scanning.

    Select the printer, and then click the sign - to remove the printer. (USB driver)

    Unplug the USB cable.

    Then click on the + sign and select the printer from the list and click Add. (Hello P1102w)

    Try to print.

    If you have run Setup for the wireless again on Mac in the first place, on the Windows computer, simply create a new port.

    Go to start, devices and printers, click right on the printer and on the left, click printer properties, select the ports tab.

    Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  • does that mean I get a message saying that Linksys Wireless Manager has stopped working

    my wireless linksys does work

    Try to install only the drivers for the card and software Linksys is not necessary to resolve this problem, you can uninstall the linksys software and install all the drivers.

  • Wireless printing has stopped working, but ONLY on my G72... not on other computers on my network mobile home.

    Hello... I have a laptop of HP G72 under windows7 64 bit and a deskjet4500 of HP printer all in one with a home network of the G of Belkin Wireless. Wireless printing works very well for months and it STILL works from another laptop. I am able to print from the G72 with a USB cord but when I try wireless I have a printer of saying not connected error message. I tried to walk through the troubleshooting tips, but nothing seems to work. Anyone can help? Thank you!

    OK, lets run this utility from the troubled PC: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  • Once I installed the new version of firefox on my mac wireless keyboard has stopped working. Work on everything except firefox.

    running the latest iMac.

    Hello

    Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

    If Firefox is open, you can restart Firefox Safe mode in the Help menu:

    • Click the menu button

      click Help

      then select restart with disabled modules.

    If Firefox does not work, you can start Firefox in Mode safe as follows:

    • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • On Mac: Hold the option key during the startup of Firefox.
    • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
      (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

    When the Firefox Safe Mode window appears, select "start mode safe."

    If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    When find you what is causing your problems, please let us know. This might help others with the same problem.

  • When I leave firefox update to 17.0.1 iheart radio has stopped working. I upgraded the flash and the media player, no joy. OS x 10.8.

    iHeart has nothing on their forum about this.

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

Maybe you are looking for