Wireless replace HP DV6163ea

Similar Questions

• HP250 J4R59ES #ABU: Wireless replacement for laptop HP250 J4R59ES #ABU card

  Hello!

  I'll try to find a compatible wireless card to replace my laptop, but do not understand those that are compatible.  Can you please help?

  Thank you!

  Heidi

  What is the card currently installed wireless? What is a combo adapter?  Use the Device Manager to see what is installed.

  Following PCIe Mini wifi adapters are compatible with your laptop.

  RALink WiFi 802.11b/g/n RT5390 adapt
  WiFi 802.11a/b/g/n Ralink RT3592 adapter
  RALink RT3090 WiFi 802.11b/g/n adapt
  RALink WiFi 802.11b/g/n RT5390R adapt
  Wi - Fi 802.11b/g/n Ralink RT3290 adapter
  MediaTek MT7630E 802.11bgn Wi - Fi adapter

  Realtek RTL8188EE 802.11bgn adapter Wi - Fi 1 x 1
  Qualcomm Atheros AR9485 802.11bgn adapter Wi - Fi 1 x 1
  QCA 9565 802.11bgn 1 x 1 Wi - Fi + adapter Combo BT4.0

  You can run in one of the problems is thatthe maintenance Service & guide does not indicate specifically whether on or two antennas are installed. Which can be controlled to the adapter wifi itself.

• Card wireless replacement on the Satellite A500D - 11 c

  Hello
  Excuse me for my English.
  I have a Satellite A500d - 11 c and my wireless card is dead.
  I want to know if the wireless card is connected to the motherboard and if I changed?

  If so, how can I do?

  Sincerely,

  Hello

  In the past, I disassembled several Toshiba laptops but not A500. In General, the principle is the same, and you can find the wireless network under the keyboard map. It must be placed enough in the middle. You will recognize easily because the WLAN antenna is connected to the network without WIRE (black wire) card.

  Problem is that the keyboard is fixed with two screws placed at the bottom hidden under the battery.

  If you don t have experience with this sort of thing please don t do anything on your own and ask for professional help.

• Satellite L735-11W: Suggestion for replacement adapter WLan

  I would like suggestions for a network adapter wireless replacement for my model - it currently has an Atheros AR9002WB-1NG, but this does not support the 5 mhz band and does not seem to raise a signal WiFi and my Samsun tab 2

  Any suggestions?

  These updates is not supported and Toshiba does not provide any kind of information on compatibility. Usually if laptop owners are not happy with the internal hardware, solution is always external third party material like PSMCIA or USB solution card.

  Unfortunately I can't help you with this, and you will be very happy if someone here has made these updates, with success, of course.

• Wireless Internet connection problems

  Windows Vista Edition Family Premium 2007

  Studio XPS 1640

  CPU: Intel (r) Core (RM) Duo

  2.40 GHz

  4.00 GB

  64 bit

  I've had my computer for almost three years now and during that time, most of the parties on this matter have been replaced.

  More recently, I got both my hard drive and my card wireless replaced due to different problems and now it has developed recently that I can not connect to wireless internet. I live with my best friend, who also has a Dell laptop and I myself own an Acer Netbook and an iPhone, both of which successfully connect to wireless internet. It seems that my system that is having this problem.

  I spoke with representatives of Dell's Support more + 5 times and nothing has solved this problem. They simply tell me it's a software problem and I have to buy something System Repair for $100 + (even after having spend $600 on a warranty, which apparently doesn't cover that material).

  Obviously, I can connect to via an ethernet/cable connection, but not wireless. It's not that the connection is not displayed, it shows and said it connects, but I only have 'Local' go. This isn't the first problem I've had with my wireless; I got other errors such as: "the ability of this network adapter does not match the requirements of this network" or the connection will show, but that their will to be greyed out as if I don't get any kind of connectivity.

  If there is more information that I can give to make this easier to understand, please let me know. I'll post the Windows IP Configuration if necessary to help solve this problem.

  Short version:

  -New hard drive

  -New wireless card

  -New router

  -Other appliances in the House a wireless connection

  -Local only access

  -With the help of Google Chrome

  -No internet access

  "It may be a problem with one or more network adapters on this computer."

  "the ability of your network adapter does not match the requirements of this network.

  ==x==
  Microsoft Windows [Version 6.0.6002]

  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

  C:\Users\Vicki>ipconfig/all

  Windows IP configuration

  Name of the host...: Vicki-PC

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: Intel(r) WiFi Link 5300 AGN

  Physical address.... : 00-21-6A-CB-2A-DC

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::6495:af89:6369:a83b % 14 (Preferred)

  Autoconfiguration IPv4 address. . : 169.254.168.59 (Preferred)

  ... Subnet mask: 255.255.0.0.

  ... Default gateway. :

  DHCPv6 IOOKING...: 234889578

  DHCPv6 DUID customer...: 00-01-00-01-15-92-53-F6-00-26-B9-25-26-60

  DNS servers: fec0:0:0:ffff:1 1%

  FEC0:0:0:FFFF:2 1%

  FEC0:0:0:FFFF:3 1%

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :

  ... Description: Broadcom NetLink (TM) gigabit Ethernet

  Physical address.... : 00-26-B9-25-26-60

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: b 35 fe80::cdfc:8: a699:3f1% 11 (Preferred)

  IPv4 address: 192.168.0.8 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Thursday, June 30, 2011 23:21:38

  End of the lease...: Saturday, July 2, 2011 12:06:18 AM

  ... Default gateway. : 192.168.0.1.

  DHCP server...: 192.168.0.1.

  DHCPv6 IOOKING...: 251668153

  DHCPv6 DUID customer...: 00-01-00-01-15-92-53-F6-00-26-B9-25-26-60

  DNS servers...: 192.168.0.1.

  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {288F80BF-48FA-41D6-AA1F-0CE0A55ECA0F}:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft ISATAP adapter

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 7:

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 02-00-54-55-4E-01

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  IPv6 address...
  . : 2001:0:4137:9e76:146f:34 has 2: 3f57:fff7 (Pref
  made a mistake)
  Address IPv6 local link...: fe80::146f:34 has 2: 3f57:fff7% 10 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled
  Tunnel adapter isatap. {7CDECA56-C37F-4889-AEB0-5587199FDF00}:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  C:\Users\Vicki >
  C:\Users\Vicki >

  Hello

  Since the update of the driver did not work I would return the system back to factory
  as suggested in my response above. After the revision updated the WiFi driver again. If this
  does not work then it's material. If necessary, you can disable the built-in WiFi and
  use a device of WiFi add-on.

  I hope this helps.

• SMART TOUCH 320

  my cursor moves to the left when not use and won't let me type unless I move the mouse. Ive tried safe mode and ran the protection against viruses and no change. He is also in safe mode. Ive no difference, also reset factory and another mouse wireless, replace the batteries. any ideas?

  Use a damp cloth to clean the underside of the mouse. Especially the Red small part brilliant in the Center. In addition, the touch technology on this PC could be a part of these and he uses cameras in the top corners and right of the screen. You have a brilliant infrared band inside the lip of the screen that reads the camera. Take a damp soft (just) slightly wet and clean gently around the inside edge of the screen. That should help him.

• ProBook 4530 s: wi - di was good on win7, not on the win10 update, and not on "go back" win 7

  OK guys, this may be the wrong forum, here goes. Thanks in advance.

  Wi - Di was good during the original installation of win7pro 64-bit.

  Weekend Christmas 2015, about a month ago, I updated this laptop to win10.

  A few days ago, I needed to use the Wi - Di feature. He had disappeared.

  I did a 'return' to win 7, because less than a month later, just less than a month.

  Immediately after the round trip, Wi - Di was still missing. A Wi - Fi connection has always worked.

  After doing a lot of driver changes, proset wireless and changes software widi, nada.

  It's still complaining that the platform is not compatible & and/or other messages of "you can do that."

  Then... I think to uninstall all software related & pilot and repeating this part.

  But the win10 update changes something else that I'm missing, which causes this behavior?

  Someone had a similar problem and maybe a fix?

  Thanks for listening.

  Hi WAWood,

  Thanks for your suggestions. I had another conversation on the forum of intel who gave advice that helped me solve the problem. I write most of this and my answer in the hope of sparks of ideas and help others to a similar question.

  This is part of what was to aleki_intel:

  2. download and save download Intel® HD Graphics Driver for Windows file name * 7/8-64-bit: win64_152824.zip
  3. download and save download Intel® PROSet/Wireless Software and drivers for Windows 7 * file name: Wireless_18.21.0_s64.exe
  4. download and save the Download Intel® Wireless Display software for windows
  5. go in Control Panel, programs and features and uninstall "Intel® PROSet/Wireless Software", if it is installed. When prompted, choose the option "ignore parameters".
  6. also in programs and features, uninstall Intel® WiDi software.
  7. in the Panel configuration, Manager of devices, network adapters, right-click on the Intel® Centrino® Advanced - N 6230 and uninstall it. Make sure that you select the option 'delete the driver for this device '.
  8 restart the PC or search the hardware changes, check the Device Manager and if an older driver is detected and installed, repeat actions to uninstall and remove as well. Repeat this process until the operating system does not allow to delete the driver, or until the controller shows as unknown device.
  9. also in devices, Graphics Manager, uninstall the Intel® HD Graphics, also select the option 'delete the driver for this device '.
  10. restart or find the hardware changes, then uninstall and remove older versions of driver as you did for the wireless adapter.
  11 install the graphic driver Intel® downloaded before.
  12. install the driver Intel® Wireless. During the early stages of the PROSet/Wireless installation, make sure you customize the installation and install all components of 3 pilot because they improve the WiDi feature.
  13 install the Pro Intel® WiDi software.

  And my response to him:

  Hey aleki_intel,
  
  My WiDi works now. Woo - hoo! ..... Is there something in your message that was a clue of what actually went.
  Here is what has been:
  I could not the graphics driver to load. I was using the .exe version and it was bailing out without installing all components.
  
  You listed a .zip version. I gave a test, but he was still not completely happy.
  After more research my backup HARD drive, where I put older drivers, I found win64_15282.zip.
  It must have been those I've used originally when I bought the card wireless replacement for WiDi goes.
  Who went right and completed without incident. After that, everything went one-two-three.
  Thanks for the tip and the simplicity.

  Thank you.

• Problem connecting C4580 for a new router on OSx10.8.4

  Hello, I am unable to connect my C4580 to my router wireless replacement of Verizon DSL.  The printer works fine when connected to my MacBook via a fixed network connection USB connection.  The instructions I found tell me should I open Device Manager HP on my MacBook, and then in the drop-down information and settings , click Setup Wizard to enter the new name and network password security.  As soon as I click on Wizard configuration, Device Manager crashes and I get the following error message:

  Process: HP Setup Assistant [433]
  Path: / Applications/Hewlett-Packard / * / HP Setup Assistant.app/Contents/MacOS/HP Setup Wizard
  ID: com.hp.SetupAssistant
  Version: 2.1.3 (2.1.3)
  Code type: X 86 (native)
  Parent process: launchd [167]
  User ID: 501

  Date/time: 2013-06-23 21:02:43.998-0400
  OS version: Mac OS X 10.8.4 (12E55)
  Report Version: 10

  Interval since last report: 16562 sec
  Crashes since last report: 14
  Per-App interval since last report: 12 s
  Per-App crashes since last report: 7
  Anonymous UUID: ED6E7A2D-B328-4737-E37A-9FF6A922BFF3

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BREAKPOINT (SIGTRAP)
  Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

  Request for clarification:
  "Reason for termination due to an untrapped exception"NSInvalidArgumentException"app,: ' *-[NSDictionary initWithObjects:forKeys:]: count of objects (1) differs from the number of keys (2)"

  Can someone help me with this?
  

   

  Configuration wizard does not work in this version of Mac OS X.  You must either borrow a Windows PC or a Mac with OS X 10.6, to be able to put the printer on the wireless network.  Sorry for the inconvenience.

• the mouse disappears at the level of the office. F8 doesn't let me do it in safe mode

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  • restarted several times without success

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  krdav4446,
  We could use a little more information on this issue.  What version of XP and service pack are you running?  If something has changed on your system recently (hardware or software)?  Have you tried another mouse?  What happens when you try to start safe mode?  Do you get any error messages?

  Here are some delicious dishes.

  If the mouse is USB, try another port (do not pass through a USB hub).

  If the mouse is wireless, replace the batteries.

  Unplug all external devices (printers, USB hubs, USB keys, etc...).

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help with WRT54GS on FiOS (ethernet, no coaxial cable)

  Hey guys, I'm new here and just try to get help with this insoluble problem that I started having with my Linksys WRT54GS and Verizon FiOS last week.

  To simplify my story complete and real question here, I put it all points to try to make it simpler to understand:

  -In the fall of 2007, I switch from Comcast to Verizon FiOS after getting screwed on waiting for two weeks and never get a new router, that one was fried in a storm

  -Little brother spills the first Actiontec router and it breaks

  Actiontec wireless - replacement of the router is non-existent (MI42WR)

  -After trying fill the Linksys for the Actiontec, it turns out to be a pain much more than a real solution to the lack of wireless

  -Past of the coaxial cable to the full ethernet cat5 last year to use Linksys WRT54GS
  -Fortunately directly connected to ONTARIO to Linksys WRT54GS via ethernet cat5 for a year while the wireless is perfect for other computers

  (last week)

  -Off router Linksys for a night the week last to give him a night's rest
  N ' unable to connect to Verizon with WRT54GS old or new router WRT54GL (which I'm now back)

  -HAVE ethernet light outside still has a green light indicating that it is working
  -Do not fill the Actiontec and Linksys again
  -I don't want to go back to the use of the Actiontec for what anyone, but stuck with it for now
  -A reset the router, computer connection and DHCP has published many times, but nothing helps

  -A updated my WRT54GS firmware before you type this and still nothing

  -No connection to any Linksys router, but the works of Actiontec

  I can't think of a solution except maybe try one of another company, as D-Link... (sad face) I'm already back the new router Monday, since I don't believe that my WRT54GS is broken even if it is not connected. If I don't think that maybe Verizon has done something that is not allowing one of my Linksys routers to connect, because fortunately, they started to charge me an extra $10-12 on FiOS bill without notice. Although at this stage, I have a hard time believing that even switch to another router company and use their products will do everything for me...

  Right now, I am suffering with this router Verizon terrible stock and my parents and aunt are complained about these last two weeks. I hope that someone here knows what may be the real problem that can sound with little assistance.

  Ah, found the solution work for a guy who had exactly the same problem as me, but with a D-Link router.

  "The best solution is to go to the ethernet connections and click Cancel, the green light on the actiontec to go yellow, unplug it in this State." Disconnect the battery power and the BBU. Put the new router in place, reconnect battery and BBU, then taken power for the new router.

  Just releasing and switching router should work but if it is not these steps work. »

  Thank you for at least trying to help me to abandoned.

• My Wi - Fi becomes disconnected at intervals

  Hello

  Since we had our router wireless replaced 2 weeks ago, my laptop at home (with windows 7) has had intermittent wireless connectivity. When I first start the laptop and internet surfing I have no problem, but every 5-10 minutes stop loading page and an exclamation point yellow appears on my wireless connection icon, which indicates that I have no internet access. When I right click the icon and select "solve problems", I connected again in a minute or 2. However, 5-10 minutes more later I usually met the same problem with the yellow exclamation mark on the wireless icon.

  Here are the 2 errors (sometimes two, sometimes one or the other) that are displayed each time I touched troubleshoot:

  The connection between your access point, router or cable modem and the Internet is broken.

  Problem with access point or wireless adapter.

  The fact that my work laptop (with windows 7) can be connected to the same network wireless for long periods without problem indicates that this is not a problem with the network. Could someone please share their ideas on how I can solve this problem of continuous disconnections?

  Thank you.

  Hello Stockton,

  Welcome to the community Microsoft Fourms.

  I understand that you have problems with the wireless internet. Then, please follow the following suggestions to solve the problem.

  Method 1: First, visit the link below to find out how to upgrade the network to the network driver.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Additional information:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Replacement card for desktop computer HP Pavilion Elite 410y wireless network

  Hello
  
  I like my wireless adapter card in my desktop HPE 410Y (bought 12/2010) has failed and must be replaced.
  Can I use a USB adapter for this model or do I have to replace the internal card?
  "The system lists a" Realtek PCIe FE Family Controller "as long as the network card.
  
  If a new card is required, which recommend,
  Or can you recommend a reliable USB adapter?
  
  If I can use a USB key, can I remove the faulty card?
  
  Thank you!

  CJ.

  Yes, you can use a USB WiFi.

  We just made a rash of our Overstock, USB WiFi. « $. 99.

  REO

• I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.

  As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.

  At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it.  We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.

• HP Pavilion 15z-aw000 CTO: Replace wireless card

  Can I replace the wireless card Realtec RTL8723BE in this notebook with capable of 5G wireless?

  Hi there @vht1951,

  I understand that you are looking for more information on the issue of whether a module compatible to add the functionality of dual band for your laptop is available.

  Looking at the: HP Pavilion Notebook PC - Maintenance and Service of Guide from the support page for your model, page 3 (13 of 94 in the pdf file), it enumerates wireless adapters, which is: Intel Dual Band Wireless-AC 3165 802.11 ac 1 x 1 WiFi + BT Combo Adapter 4.2.

  If you find your model on the HP parts store, the part is listed as: '806723-005 Intel Dual Band Wireless-AC 3165 802.11 ac 1 x 1 WiFi and Bluetooth 4.2 combination WLAN fit' and is currently listed as for the remainder.

  You can check the site later to see the availability or the other site HP Partsurfer, to see if you there is a seller who might already own part.

  I hope that helps and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Replacement wireless Mini-PCI on PLL10E NB100-12 s

  Greetings from Barcelona!

  My question is, if this would be the replacement rate card Wireless miniPCI possible for Wireless-N. I mean if the motherboard support this type of card.

  The map in question is (in Spanish):

  Link: [http://www.ciudadwireless.com/ubiquiti_networks_ubiquiti_sr71-e_hi-performance_mimo_wireless_mini_express_atheros_ar9 280-p - 2765.html]

  Don't be fooled the image. It has nothing to do with the product.

  The drivers are also not a problem because the last Atheros chipset supports also this. No problem for disassembly, is not the first time that I deleted it. I tried to change the hard drive, and I find the card. My question is if the motherboard this card. I want to confirm before buying anything.

  A hug to everyone.

  EDIT: sorry! I have a Toshiba NB-100-12 s PLL10E

  Hello

  The mother need card WLan miniPCI.
  AFAIK there is no limitation of the motherboard.

  But the Draft N needs 3 son antenna the usual 802.11 A, B or G supports 2-wire antenna WLan. So, in my view, this could be a problem.

  See you soon