Wireless Setup problems

I have been using my p1102w with the usb connection, but due to the reorganization of the House I would like to configure the wireless. I went to start and programs and click Wireless Setup. When it asks me to choose my SSID, I select it. It gives me an error "the printer could not communicate with any router or with the given SSID access point" or something of that nature. I made sure that the wireless button has been pushed on the printer, so it was blinking. IM at a loss to know what to do now. Thank you.  My model is CE651.

For the readers of the forum of the future, I solved my problem by changing the name of my network to something without spaces. For example, instead of "fluffy dog" is now "fluffydog". After that the installation program immediately recognized my SSID.

Tags: HP Printers

Similar Questions

  • 4620 Wireless Setup problems

    Having problems connecting to the router HP 4620.  Using a new Apple Airport Extreme.  Move the flashing blue light on the printer.  Anyone?

    You should have a really easy option here to connect the printer to your network. If you are installing the printer via the USB port, there should be a way to activate the wireless configuration wizard which should convert the machine during a wired to a wireless USB connection. Let me know if it works for you and I'll be back just for you!

    -Spencer

    PS I hope you have a wonderful week!

  • Wireless SETUP problem

    Good day everyone,

    Yesterday, I received the DELL INSPIRON 15 (INSPIRON 3543) - serial number ADMIN NOTE: maintain the label removed by privacy policy >

    Core i5, 4 GB ram.

    I have a hard drive SSD to accelerate the machine, and I didn't use windows 8, so I installed my copy of Windows 7 ultimate x 64.

    Since there is no drivers, I downloaded the keyboard and driver of the mouse as well as the wifi & Bluetooth driver on my Samsung laptop then I transferred the files on the Dell and install - everything was going well until I started to download the other drivers (directly from the Dell site). After you install the rest of the drivers I continued to receive (and I don't always) an error message on the configuration without wire - Notification dll has not been registered, program will not work correctly.

    I can't find anything that will help my situation - I tried on the advice that I found on Internet to run CMD as administrator and typing a line that would register this dll<-- that="" didn't="" work.="" apart="" from="" that="" i="" couldn't="" find="" any="" other="" solid="">

    I am not very happy I haven't had this laptop for 24 hours and already I have two questions. The other problem I have is a critical update windows - I don't have the number of KB on me, but whenever I try to install it, it would give me a screen blues and it would be empty physical memory.

    Never forget the memory dump - I need to address the problem of wireless configuration as the Dell's for my father and he will be 1 million questions that I can't answer.

    Any help will be greatly appreciated.

    Thank you.

    Well, the reason why I don't want to Win10 on my pc is because I heard a lot of bad things about it - I don't want bugs on my pc. So I installed the single OS, currently approved, Win7.

    All the drivers have been downloaded from the dell site, according to the service number and the operating system selected.

    In the meantime, it would seem that I managed to solve our problem by following these steps:

    START > all PROGRAMS > ACCESSORIES > right click on command prompt, select RUN AS ADMINISTRATOR--> now follow the steps below:

    After the C:\\WINDOWS\sytem32 > (some thing on the screen of the COMMAND PROMPT... basically whatever you would have, just start with step below).

    type: space

    then type in: regsvr32

    then type: space

    then type: wltrynt.dll

    Press: enter

    It worked for me - I restarted several times and have not yet had the error back to the top.

  • Network with DSL and wireless setup problem

    I use two number of script and lan proxy... NW its Internet connects only via script... no more connection with lan numbaer, I checked dsl. the amount of the fine... Help, please... also

    Give me some advice on, dsl, wireless configuraion in switches

    Kind regards

    Mohammed

    Used Google...

    http://www.Google.com/#hl=en&&SA=X&EI=gbX-TJTwBsWclgfevL29CA&SQI=2&ved=0CBMQvwUoAQ&q=DSL+, + wireless + configuration + in + switches & spell = 1 & fp = e18ec2db23988f7d

    --
    Gina Whipp
    2010 Microsoft MVP (access)

    Please post all responses on the forum where everyone can enjoy.

  • HP pavilion dv4000 (dv4223ea) Wireless Setup problems

    After you have reinstalled windows xp on my hp pavilion dv4223ea I can't find a software for its wireless card. I already tried all drivers wireless hp for this product site. I thank very you much for your time in advance.

    Hello:

    Go to Device Manager and click on the drivers who need network controller.

    Then click on the Details tab.

    After the string of characters you see that start with PCI\VEN.

  • J4680 Wireless Setup problems

    Help!  I just bought a J4680 all-in-one.   I tried to configure the wireless.   He failed on filtering.   The print sheet, suggested that I turn off MAC filtering in my wireless router.   I have connected to my wireless router & found that this option was already disabled.    What is my next step?   (I can get the printer works correctly using a wired connection).    Can I configure a static IP address instead of using a DHCP address?   Who will work in its place?

    Try to change the channel from router to 11 and then to restart the printer.

  • HP Photosmart premium printer that disconnects constantly with my wireless setup.

    My Photosmart printer disconnects constantly.  I have to go to the Wireless Setup Wizard to bring him back.  I use a laptop HP pavilion dv6-321.  I also have 2 dell desktop computers that are connected is the same too.  I'm using Comcast as my ISP and have a Cisco's Linksys wireless router.  Can anyone help?
    Thank you.

    Hello

    1 did you change on your computer before this problem?

    2. what operating system is installed on your computer?

    What version of the operating system Windows am I running?

    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

    Follow the suggestions and see if it helps.

    "Method 1".

    Follow the steps in the article.

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Method 2

    Check to see if the problem exists in a clean boot state.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a troubleshooting follow step 7: reset the computer to start as usual

    See also:

    Network printer problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

    (For Windows 7)

    Previous post your answer for you help in this matter.

  • 4620 to windows wireless connection problem 8

    Unable to connect wirleless to 4620 with windows 8 - home network

    works with windows 7 and windows XP but my new computer has windows 8 and can not do work - message says that the printer is not 'online' - Please help if you can.

    Hello

    What happens when you run the Wireless Setup Wizard on the printer?

  • Wireless network problem: disconnects randomly anywhere between 1 and 4 hours.

    I have a wireless network problem, it disconnects randomly anywhere between 1 h and 4 h. The network consists of a Samsung 4 G hotspot and a Linksys AE1000. The signal strength is excellent, the AE1000 is 1 ft of the computer and 1 ft of the HotSpot.  The computer is a Dell Dimension 2400. Any ideas?

    Hi Jack,

    Problem solved.  I did 2 assumptions about the original problem.  I assumed that the 2 Tech that I spoke made the hurt their product. Battery saver has been activated on the hotspot.

    Thanks again

    Greg

  • wireless connection problems vista adapter usb wireless 802.11 b/g #2

    my HP pc used to connect to my internal wireless, no problem. I know the wep key and had several hours of navigation...
    I move for a year, come back. apparently my PC doesn't connect now... in fact, it won't even connect with a CABLE!
    He repeats to me ' identify with. "
    Well, Vista has been updated since and I've been usng a mobile dongle (at GREAT expense!) to try to update, but now I'm sick of the cost and I need internet access appropriate again!

    Thank you for responding Srinivas
    I don't know the model but it is a HP, three or four years now.
    I had all sorts of messages of "not able to connect" and limmited conectiviy... I'm sure I had a relative at all simply have no connection
    the browser, I would have used that I had connected would be Firefox, but it has yet to get to the point that I was getting nothing. bytes sent might be higher than anything but received nill.
    at the time, I was unable to get ANY connection NET... for all intensive purposes, I've been totally disconnected

    I had tried everything that arises, each suggestion had windows, but it made no difference... even a connection WIRED sitting to 'authenticate '.

    Odly enough, who are seeking to solve a problem with my scandisk is not not be able to access C drive I have run "services.msc".
    looking through everything that might stop the player access, I found that the DHCP Client does not work... I made sure it runs automatically and (because I checked my settings of a few hundred times) the network came as a light!

    I don't know what turned it off because none of the programs I run affected before (I haven't installed any new programs since then be disconnected from the network)

    Thanks for the reply. I hope this information helps in similar cases in the future :)

  • Pavillion G6 2014tx: wireless connectivity problems

    Since the last 2-3 months, my wireless connection does not work correctly. This happened right after that I did the partitioning in the D drive (I don't think this is the main cause). What is happening is that, all of a sudden when internet does not bar shows signs of yellow warning and 'tells' LIMITED ACCESS wireless network. When I try to solve problems, it will give no problem. Then in Device Manager, I tried to uninstall and install again, the internet worked for a while, and still the same problem occurs. When I tried to call to the service center, they told me that I have to buy CDs to retrieve a value of rs500 because I did not these recovery disks. I'm in serious trouble please help...

    I also tried to update latest driver frm net, even if the problem does not get resolved. I also tried to reset the TCPIP in cmd prompt, but it worked for 2-3 days and still the same problem happened...

    Hi there @Parthsagar2010

    Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

    I understand that you are having problems with your wireless connection, and I am happy to help you with this.

    I realize that you mentioned the update of your driver from the internet, but just in case, here is the page drivers. There are several pilots possible depending on what card you have.

    HP Pavilion g6-2014tx Notebook PC - software & drivers

    The following pages are useful for troubleshooting wireless connectivity problems.
    Troubleshooting your wireless network and Internet access (Windows 7)

    In addition, you can watch the the power management of your wireless adapter:
    Turn off the power to the adapter:
    1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
    2. expand the network adapters.
    3. right click on the Ethernet adapter / wireless, and then click Properties.
    4. click on the power management tab.
    5 remove the check mark next to allow the computer to turn off this device to save power.
    6. click on OK.
    7 test cycle.

    Forget the network: (Windows 7)
    1. press start.
    2. tap manage wireless networks, click on the application at the top of the start menu.
    3. right click on the network, and then click on remove network.
    4 confirm the warning by clicking OK.

    Reset TCP/IP on your PC:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the winsock catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    Reinstall the NIC drivers:
    1. download the drivers from here, but do not run them again.
    2. go to your Start menu/screen and type Device Manager.
    3. expand network adapters.
    4. right click on the wireless adapter and choose uninstall.
    5 install the drivers downloaded in step 1.
    6. restart your PC and test.

    Test an ethernet connection:
    Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

    Test another connection:
    Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  • Windows 7 wireless connection problem

    I just bought a brand new Alienware m17x and all drivers are up to date... .IM with broadcom wireless network adapter. The strange thing is that last night I was on the internet for several hours without any problem using the wireless, but this morning iwas unable to use my wireless internet access. This has happened several times now. Sometimes it says "not connected - no available connections" and sometimes he says "not connected connections are available" when she says, links, I try to connect to the network, but it says "unable to connect to the network. The only time wherever I was able to connect to wireless internet, was when my computer is automatically connected to my wireless network without me having to select the network and attempt to connect. I read things about windows 7, with a mode of "sleeper" for wireless connections or something, and that can be the cause of it and that it is better to turn off or downgrade to xp. I am really frustrated because I am not able to connect wirelessly and I hope you guys can help me find a solution.

     

    Guide to correctly troubleshoot wireless M17x
    with Dell Wireless 1510/Broadcom card
    by Glzmo

    Since many new Alienware M17x all powerful users, especially those who use Windows 7 as operating system there are various problems with their Wi - Fi connection and post threads asking how their difficulty over and over again, I decided to write this guide to show them how to solve these issues properly Commons. The solutions in this guide were created and designed for 64-bit Windows 7, but they may also work in Windows Vista, although these problems were experienced by users of Windows 7 mainly in the past. It could very well be that the problems start occurring in Vista as well with the new drivers and Windows updates.

    I. may not connect to the wireless network and or see the wireless adapter when the Ethernet cable is disconnected
    If you sometimes or always unable to connect to the wireless network, cannot connect to the wireless network when the Ethernet cable is disconnected, unable to connect to a wireless network unless you restart once to get this work and other weird problems to be unable to connect to a wireless network continue with section II. Otherwise, continue with section II..

    Sleep of a.i. Disable on disconnect device
    Some new Nvidia Ethernet drivers have a function called sleep device to disconnect. This is the culprit. Normally, it should only put the card Ethernet to sleep when the cable is disconnected, but it is buggy and thus kill the wireless connection as well.
    Follow these steps to disable this feature on your Ethernet Nvidia card:

    1. open the Device Manager of Windows by pressing Win + break, and then click on Device Manager on the left side.
    2 double-click network adapters.
    3 double click on NVIDIA nForce Networking Controller (Yes, that's indeed wired Ethernet adapter).
    4 click on the Advanced tab.
    5 select sleep on disconnect device.
    6 set the value to disabled.
    7 click OK and wireless should work again (may require a reboot later, but probably not).

    I.b. install different drivers (older) who do not have the device sleeping on disconnect feature.
    The above does not work or if you are not comfortable with these drivers, follow these steps (if step A.i. was successful, you will not need to follow these steps). Take care to create a system restore point before proceeding:
    1. click the Windows Start button in the taskbar.
    2 click on Control Panel.
    3 click on uninstall a program.
    4 in the list, double-click Nvidia drivers.
    5. Mark Remove only the following.
    6 in the box below, only check the Nvidia Network driver.
    7 click Remove and follow the uninstall instructions.
    8 restart the system, if you are prompted to.
    9 download another (older) driver from Nvidia.
    10 install the old driver.
    11 when asked what drivers you want to install, select only the network driver.
    12 follow the installation instructions and restart your system if prompted.

    II. Low or fluctuating wireless connection speeds
    If you have problems with WiFi low connection speeds (such as rates decline over time, the speeds are much lower than they should be, network lag/stutter in online games, loss of light packets, loss of internet connection as LAN works and other weird things) or speeds of fluctuating wildly without apparent reason wireless connection install the version of the Dell Wireless 5.60.18.8 drivers instead of the standard Broadcom drivers. All older drivers will usually cause the speed of connection under normal. Note, however, that you may need to install the driver manually via Device Manager as the pilot was not released for another laptop and is not officially available to the M17x yet - that's why the installer won't work. Take care to create a system restore point before proceeding.
    Here is a step by step how manually install the driver:

    1. download the drivers Dell Wireless 5.60.18.8.
    2 check out the R29128.exe file using an extraction utility like WinRAR or just run it and quit the installation program.
    3. open the Device Manager of Windows by pressing Win + break, and then click on Device Manager on the left side.
    4 double-click network adapters.
    5 double-click the Broadcom 802.11n network adapter entry.
    6 click on the driver tab.
    7 click the button Update driver .
    8 click Browse my computer for driver software.
    9 click on Let me take form a list of drivers for devices on my computer.
    10 click the disk provided .
    11 click Browse.
    12. select the folder that you extracted the drivers you just downloaded in step 1. in.
    13 select the subfolder DRIVER_US (if you are in the United States), DRIVER_JP (if you are in the Japan) or DRIVER_ROW (if you are in the rest of the world), according to the region you are in.
    14 click on the Open button.
    15 click OK.
    16 select the driver that says Dell Wireless 1510 Wireless-N WLAN Mini-Card of the list (you may have to scroll down to see - it presents itself as second to the last in the list for me).
    17 click on the Next button.
    18 you will get a warning that the driver that you are about to install is not compatible with your hardware. Ignore the warning and proceed with the driver installation.
    19 restart your system if prompted to do so.
    20 your new driver should now be properly installed and the speed of your wireless connection in the order.

    III. If all else fails (or you've just had enough of boredom arising from the Dell Wireless 1510/Broadcom card)
    Replace the Dell Wireless 1510 problem with a card half-mini Intel Ultimate N WiFi Link 5300 A/G/N (use the bluetooth as the third antenna antenna or buy you an additional antenna for this). It works very well with the M17x, has better connection speeds to strips of the 2.4 GHz and 5 GHz (this last has speeds really bad on the Broadcom/1510), it has not required to jump through the hoops to make it work properly and much more, it works with standard drivers and Intel maintains their drivers up to date. It is also much more reliable and faster as well, especially on the 5 GHz band, but also on the 2.4 GHz band.

    For more information on the subject of tweaking the settings of your Dell Wireless card, check out the official setting advanced properties: Dell Wireless WLAN Card User Guide.

    I hope that this guide will help you solve your Wi - Fi connection and allow you to enjoy speeds of complete wireless connection on your laptop Alienware M17x.

    Addendum: Quick links in this Guide

    Driver wireless Dell 5.60.18.8 version
    Download the driver for the Mini PCI Dell Wireless 1510 card used in this guide.

    Broadcom 943xx Wireless Driver version 5.60.18.41
    Download the latest Broadcom driver as an alternative to the Dell a little older driver who may or may not solve the problems more. Some have seen more success than with the 5.60.18.8 drivers with it (you need to use the 802.11n network adapter driver rather than at the entrance to Dell Wireless 1510 Wireless-N WLAN Mini Card in step II.15. the guide when you use this driver).

    Setting advanced properties: Dell Wireless WLAN card User Guide
    Reference Dell official Manual/Guide on the various properties Advanced Dell Wireless cards.

    Card Intel Ultimate N WiFi Link 5300 A/G/N Half-Mini
    Link to buy the demi-mini card Intel Ultimate N WiFi Link 5300 A/G/N of dell.com upgrade the crappy Wireless Dell 1510/Broadcom card that comes with the M17x.

    This Guide is a work in progress. I will update as I hear it.

    Feel free to link it in different threads to disseminate information.

  • Disappointing: HP photosmart premium c309a wireless configuration problem. lack of options.

    just bought the HP309a the other day. Love the exit but looks like I have to go back. The printer has ZERO flexibility and configure for wireless connectivity.  You MUST USE the WEP key index #1 to connect.  It does not to adjust the settings to match your existing network.  Where I am, I almost10 running wireless networks where I live.  I use/need a key for more security.  My PSC 2510 old gave me the flexibility to adapt.  Help support told me that's about it... Could someone find a way?  The parameters to record your IP address manually are also very restrictive.

    I'll have to return the printer.  I wouldn't change my existing network (running 4 computers) just to correspond to 1 printer. Not sure why HP has realized this newest model so restrictive.

    Ok. Then temporarily connect the printer to your router using an ethernet cable. Now you should be able to access the Printers page, then run the Wireless Setup Wizard. To know the IP address of the printer, press Setup > network settings > view network settings > display wired summary.

  • C8180 and having problem Wireless Setup.

    I have a C8180 that I use wired to my router for over a year, but had to move the router (WRT54G v2 w/fw ver 4.30.5) to reflect the location of the modem sat (new).  I really want to connect a cable through floors and walls if not absolutely necessary, then try to configure the wireless printer.

    Problem is that I can't find the correctly entered WPA key via the front panel.

    Suggestions? Is there a utility that I can use to configure that temporarily wired while? or via USB cable (still tentative)?

    I tried to ask the question about the live chat support, but the session has been altered somehow.

    Thanks in advance for any help or suggestion.

    With the ethernet cable is still connected, type the printer's IP address in a web browser, and press ENTER. Now click on the network at the top option, select Wireless 802.11 g from left to right, and then start the Setup from there wireless Wizard. Now, you can type the password on the keyboard, and it should work fine. Unplug the ethernet cable before turnin on the wireless radio to check if it is connected.

  • 550-153w Pavilion: wireless driver problem

    the office came with windows pre-installed 10 my customer needs this machine to be downgraded to the 64-bit windows edition 7 and I'm having a problem with the driver for the wireless, it's a bcm943142HMBPFXH_2 HW 07 Rev 3 driver that is available on the website of hp for windows 10 for bluetooth works fine but the wireless driver does not work and Windows 7 there is none driver broadcom listed, but when I try to install the driver windows 10 in compatiblity mode with windows 7 using the setup file it gives year error stating the OS is not supported when I force the driver it there using the dll and inf files it gives me has yellow exclamation point that says the requested device registry key does not exist but it shows the driver loaded and even the wireless properties where you can make changes to the adjust Broadcom has a page located here https://www.broadcom.com/products/wireless-connectivity/bluetooth/bcm43142 goal No. drivers for download now compatible with windows 7 64 bit all of the third-party drivers I have tried does not work it either gives me this same error year gold error stating that the drivers are missing or corrupt if it's a combo card you would think hp would have a combo driver and why we there site is it two separate setup files i've been working on a solution for days now and my customers are more and more looking forward

    This is the Broadcom W7 driver that is bound to the 550-000 series support page.

    It seems terrible old for me that is why I didn't post it.

    This package provides the driver Broadcom Wireless LAN (WLAN) in the supported desktop models and operating systems.

    File name: sp68997.exe

    If this does not work either I suggest to reinstall W7 because all experimentation driver you have probably messed up the registry.

    Check the hardware ID of the device with the taken ID's supported by the drivers that I posted.

    The one I posted is supported by models with the following ID as set forth in the driver installation information file.

    ; x 64 (AMD64, Intel's EM64T) - Win7
    ;
    [BROADCOM. NTamd64.6.1]
    % BCM430N_DeviceDesc % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_2230103C
    % BCM430N_DeviceDesc % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_22D3103C
    % BCM430N_DeviceDesc_HPY % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_2232103C
    % BCM430N_DeviceDesc_HPY % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_22D4103C
    % BCM430N_DeviceDesc_HPY % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C

    The other I posted is supported by the following ID:

    ; x 64 (AMD64, Intel's EM64T) - Win7
    ;
    [BROADCOM. NTamd64.6.1]
    % BCM430N_DeviceDesc % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_2230103C
    % BCM430N_DeviceDesc_HPY % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_2232103C
    % BCM430G_DeviceDesc % = BCM43XG_NT61, PCI\VEN_14E4 & DEV_4320 & SUBSYS_00E70E11 & REV_03
    % BCM430G_DeviceDesc % = BCM43XGT_NT61, PCI\VEN_14E4 & DEV_4320 & SUBSYS_12F4103C & REV_03
    % BCM430G_DeviceDesc % = BCM43XG1_NT61, PCI\VEN_14E4 & DEV_4320 & SUBSYS_12F8103C & REV_03
    % BCM430G_DeviceDesc % = BCM43XG2_NT61, PCI\VEN_14E4 & DEV_4320 & SUBSYS_12FA103C & REV_03
    % BCM430G_DeviceDesc % = BCM43XG3_NT61, PCI\VEN_14E4 & DEV_4320 & SUBSYS_12FB103C & REV_03
    % BCM430M_DeviceDesc % = BCM43XM1_NT61, PCI\VEN_14E4 & DEV_4324 & SUBSYS_12F9103C & REV_03
    % BCM430M_DeviceDesc % = BCM43XM2_NT61, PCI\VEN_14E4 & DEV_4324 & SUBSYS_12FC103C & REV_03

    % BCM430G_DeviceDesc % = BCM43XG1_NT61, PCI\VEN_14E4 & DEV_4318 & SUBSYS_1355103C
    % BCM430G_DeviceDesc % = BCM43XG2_NT61, PCI\VEN_14E4 & DEV_4318 & SUBSYS_1356103C
    % BCM430G_DeviceDesc % = BCM43XG3_NT61, PCI\VEN_14E4 & DEV_4318 & SUBSYS_1357103C
    % BCM430M_DeviceDesc % = BCM43XM1_NT61, PCI\VEN_14E4 & DEV_4319 & SUBSYS_1358103C
    % BCM430M_DeviceDesc % = BCM43XM2_NT61, PCI\VEN_14E4 & DEV_4319 & SUBSYS_1359103C
    % BCM430M_DeviceDesc % = BCM43XM3_NT61, PCI\VEN_14E4 & DEV_4319 & SUBSYS_135A103C

    % BCM430G_DeviceDesc % = BCM43XG11_NT61, PCI\VEN_14E4 & DEV_4311 & SUBSYS_1363103C
    % BCM430G_DeviceDesc % = BCM43XG12_NT61, PCI\VEN_14E4 & DEV_4311 & SUBSYS_1364103C
    % BCM430G_DeviceDesc % = BCM43XG13_NT61, PCI\VEN_14E4 & DEV_4311 & SUBSYS_1365103C
    % BCM430M_DeviceDesc % = BCM43XM11_NT61, PCI\VEN_14E4 & DEV_4312 & SUBSYS_1360103C
    % BCM430M_DeviceDesc % = BCM43XM12_NT61, PCI\VEN_14E4 & DEV_4312 & SUBSYS_1361103C
    % BCM430M_DeviceDesc % = BCM43XM13_NT61, PCI\VEN_14E4 & DEV_4312 & SUBSYS_1362103C
    % BCM430M_DeviceDesc % = BCM43XM14_NT61, PCI\VEN_14E4 & DEV_4312 & SUBSYS_135F103C

    % BCM430G_DeviceDesc % = BCM43XG11_NT61, PCI\VEN_14E4 & DEV_4311 & SUBSYS_1374103C
    % BCM430G_DeviceDesc % = BCM43XG12_NT61, PCI\VEN_14E4 & DEV_4311 & SUBSYS_1375103C
    % BCM430G_DeviceDesc % = BCM43XG13_NT61, PCI\VEN_14E4 & DEV_4311 & SUBSYS_1376103C
    % BCM430G_DeviceDesc % = BCM43XG14_NT61, PCI\VEN_14E4 & DEV_4311 & SUBSYS_1377103C
    % BCM430M_DeviceDesc % = BCM43XM11_NT61, PCI\VEN_14E4 & DEV_4312 & SUBSYS_1370103C
    % BCM430M_DeviceDesc % = BCM43XM12_NT61, PCI\VEN_14E4 & DEV_4312 & SUBSYS_1371103C
    % BCM430M_DeviceDesc % = BCM43XM13_NT61, PCI\VEN_14E4 & DEV_4312 & SUBSYS_1372103C
    % BCM430M_DeviceDesc % = BCM43XM14_NT61, PCI\VEN_14E4 & DEV_4312 & SUBSYS_1373103C

    % BCM430NM_DeviceDesc % = BCM43XNM11_NT61, PCI\VEN_14E4 & DEV_4328 & SUBSYS_1366103C
    % BCM430NM_DeviceDesc % = BCM43XNM12_NT61, PCI\VEN_14E4 & DEV_4328 & SUBSYS_1367103C
    % BCM430NM_DeviceDesc % = BCM43XNM13_NT61, PCI\VEN_14E4 & DEV_4328 & SUBSYS_1368103C
    % BCM430NM_DeviceDesc % = BCM43XNM14_NT61, PCI\VEN_14E4 & DEV_4328 & SUBSYS_1369103C

    % BCM430G_DeviceDesc % = BCM43XG11_NT61, PCI\VEN_14E4 & DEV_4315 & SUBSYS_137C103C
    % BCM430G_DeviceDesc % = BCM43XG12_NT61, PCI\VEN_14E4 & DEV_4315 & SUBSYS_137D103C
    % BCM430G_DeviceDesc % = BCM43XG11_NT61, PCI\VEN_14E4 & DEV_4315 & SUBSYS_1507103C
    % BCM430G_DeviceDesc % = BCM43XG12_NT61, PCI\VEN_14E4 & DEV_4315 & SUBSYS_1508103C
    % BCM430G_DeviceDesc % = BCM43XG11_NT61, PCI\VEN_14E4 & DEV_4315 & SUBSYS_365E103C
    % BCM430G_DeviceDesc % = BCM43XG12_NT61, PCI\VEN_14E4 & DEV_4315 & SUBSYS_365F103C

    % BCM4322NM_DeviceDesc % = BCM43XNM21_NT61, PCI\VEN_14E4 & DEV_432B & SUBSYS_137F103C
    % BCM4322NM_DeviceDesc % = BCM43XNM22_NT61, PCI\VEN_14E4 & DEV_432B & SUBSYS_1380103C
    % BCM4322NM_DeviceDesc % = BCM43XNM21_NT61, PCI\VEN_14E4 & DEV_432B & SUBSYS_1509103C
    % BCM4322NM_DeviceDesc % = BCM43XNM22_NT61, PCI\VEN_14E4 & DEV_432B & SUBSYS_1510103C

    % BCM43224NM_DeviceDesc % = BCM43XNM21_NT61, PCI\VEN_14E4 & DEV_4353 & SUBSYS_1509103C
    % BCM43224NM_DeviceDesc % = BCM43XNM22_NT61, PCI\VEN_14E4 & DEV_4353 & SUBSYS_1510103C

    % BCM43228NM_DeviceDesc % = BCM43XNM23_NT61, PCI\VEN_14E4 & DEV_4359 & SUBSYS_182C103C
    % BCM43228NM_DeviceDesc_HPD % = BCM43XNM23_NT61, PCI\VEN_14E4 & DEV_4359 & SUBSYS_05E214E4
    % BCM43228NM_DeviceDesc_HPD % = BCM43XNM23_NT61, PCI\VEN_14E4 & DEV_4359 & SUBSYS_2135103C
    % BCM4313NG_DeviceDesc % = BCM43XNG2022_NT61, PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C
    % BCM4313NG_DeviceDesc % = BCM43XNG2022_NT61, PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C
    % BCM4313NG_DeviceDesc % = BCM43XNG2022_NT61, PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C

    % BCM43225NG_DeviceDesc % = BCM43XNG22_NT61, PCI\VEN_14E4 & DEV_4357 & SUBSYS_145E103C
    % BCM43225NG_DeviceDesc_HPD % = BCM43XNG22_NT61, PCI\VEN_14E4 & DEV_4357 & SUBSYS_057014E4
    % BCM430AC_DeviceDesc % = BCM43XAC_NT61, PCI\VEN_14E4 & DEV_43B1 & SUBSYS_2154103C
    % BCM430AC_DeviceDesc_HPZ % = BCM43XAC_NT61, PCI\VEN_14E4 & DEV_43B1 & SUBSYS_2007103C

Maybe you are looking for