Wireless Vista SP2 issues

Similar Questions

• Post install Vista SP2 issues

  I installed the x 64 SP2 of Vista on my computer. So far, I've noticed two problems:
  1. no is longer automatically updates Windows Defender . I have to do a manual update, which means that I have to "remember" to do. Really want to have the automatic update to work again.
  2. I've noticed that when I use the application Help & Support, the graphics do not appear. I just get a glimpse of the box with the red X (as you get on a site web - a placeholder for graphics).

  What should I do to solve these two problems?

  Before I updated the system to SP2, I have not either of these issues. That by applying the SP2 update. I have not installed new software, drivers, etc. Since the update to SP2.

  My computer: Pavilion dv7-1232nr AMD (X 64) Windows Vista Edition Home Premium x 64

  Thanks, Barb

  After reading many groups of Vista online, I finally found a page that responds to the problem of no graphics in the help and Support application. Here is the link in case anyone has the same problem (http://www.vistax64.com/tutorials/87497-help-support-vista.html). It worked perfectly for me when I used 2 Option.

  I will now call this topic resolved and closed.

• Errors after downloading and trying to install on Vista SP2

  Running Vista Home Premimum, SP1 64-bit.  Downloaded the SP2 for Vista and get this error - ERROR_SHARING_VIOLATION (0 x 80070020) I turned weird my program McAfee and it still gives me the error.  Any help?

  TaurArian said. See also...

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [Error 0 x 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  Free unlimited installation and compatibility support is available for Windows Vista SP2 issues until August 30, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 80041010 installation in Vista SP2

  Hi, I have a Dell laptop with Vista. Windows updates are installed automatically, which works very well. Only can´t SP2 be installed, after accepting the agreements that it displays error 80041010. I ve tried these solutions to solve cela, but nothing helps:

  1. http://support.microsoft.com/kb/947366

  2. http://www.nyisi.com/2010/02/20/vista-sp2-failed-with-code-0x80041010/

  3. install the standalone version

  Other solutions?

  THX, Caroline

  Free unlimited installation and compatibility support is available for Windows Vista SP2 issues until August 30, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Post installation of the Vista SP2, it does not detect my DVD drive.

  Recently in the month of April 10, I had my laptop (Compaq Presario V6608AU) repaired because it doesn't detect DVD drive. The techincian had reinstalled vista on it and it was my regular vista. As my laptop has automatic updates enabled it installed Vista SP1 and SP2 later. After installation of SP2, my DVD player no longer works. The light initially whn system starts but windows gets loaded, it didn't post. Could some help me to get this resolved. Restore option I tried, but I restore options after installation of SP2. I have my handy DVD recovery but I'm handicapped because of this problem of DVD player and impossible to restore...

  Support Microsoft still offers a FREE support for Vista SP2 issues at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1.  They will give you the expert help you need with this problem with SP2.  They can connect remotely to your computer to help diagnose the problem - something that we cannot do.  Enjoy the offer while it still exists.  I'm sure they can help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• VISTA SP2 GROUP POLICY CLIENT DOES NOT.

  While LOG IN ADMINISTRATIVE ACCOUNT TYPE gpedit.msc then it does not

  any solution

  Microsoft support offers a FREE support for Vista SP2 issues at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1.  Take advantage of it while it lasts stilll.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista SP2 wireless connection drops

  People, I know this question has been asked before, but I can't find a solution to my problem.  I've had my Dell laptop for about 6 months now and it worked perfectly, without any problem wireless connection.  On Sunday, August 9, I installed Vista SP2.  It updated no problem at all, but once he did his final reboot, it connected to my wireless router for about 5 minutes, then dropped connection.  Now, when you restart it only connects for a minute or two wireless then abandons connection.  I then uninstalled SP2 but it has not solved the problem with wireless.  My wireless adapter is an Atheros AR5007 and drivers are all up to date.

  Anyone know how I can fix this so that my wireless signal stay tuned as he used to pre SP2?
  Thank you.

  Hi KK_14,

  Thank you for visiting Windows Vista Microsoft answers forum.

  Fixing the problems of common networking in Vista:

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  http://support.Microsoft.com/kb/299357

  Disable the IP helpdesk:

  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

  2. scroll down to the IP assistance service, right-click on it and select Properties

  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

  4. then click on "Stop" to stop the service from running in the current session

  5. click on OK to exit the dialog box

  Disable IPv6:

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Disable the DHCP Broadcast Flag:

  Link: http://support.Microsoft.com/default.aspx/KB/928233

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/ (how to back up and restore the registry in Windows)

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  This registry path, click the (GUID) subkey that corresponds to the card network that is connected to the network.

  On the Edit menu, point to new, and then click DWORD (32-bit) value.

  In the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  Right-click DhcpConnEnableBcastFlagToggle, then click on modify.

  In the value data box, type 1 and then click OK.

  Close the registry editor.

  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

  Please let us know if it helps.

  Thank you and best regards,
  David

• Vista SP2 has failed and corrupted Sprint Compass 597 for Sierra Wireless Broadband

  Hello, there when Vista SP2 came out, several months of my downloads I tried to install SP2. He COULDN'T as well as corrupting my Sprint to wide broadband Compass 597. I had to 'rollback' to a previous version of Vista Ultimate (32 bit) and had a technician Sprint "Reinstall" an older version of my wireless broadband to make it work again.  I am constantly on the download request to install SP2.  Microsoft has solved the problem for my without wire will not get corrupted again and I never knew why the Service Pack would not move.   My hardware is: Dell XPS M1530 Laptop, Vista ultimate 32-bit, 4 GB of ram. Any ideas/suggestions will be greatly appreciated.  Also if I should try to re - install and that there no what is the phone number of Support technique Microsoft.

  Thanks in advance.

  See KB948187 or open another free support incident:

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after you install a service pack<=choose this="" option="" this="" time).="" ~robear="" dyer="" (pa="" bear)="" ~="" ms="" mvp="" (ie,="" mail,="" security,="" windows="" &="" update="" services)="" since="" 2002="" ~="" disclaimer:="" ms="" mvps="" neither="" represent="" nor="" work="" for="">

• Vista SP2 not allowing not Internet connection

  I recently installed the new windows vista sp2. Now, I did that I was not able to connect to a wireless network and the internet sometimes decides to work when it is connected through the LAN.

  I went back to sp1, and now it is fine.

  does anyone else have this problem? If yes how can I fix?

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  So that the network is working properly, let's check to see if your network services are working properly.

  1. open the Start Menu

  2 type services in the start search box and press enter

  3. click on continue in the UAC prompt

  4. search for network connections, network list Service, knowledge of network and Service of Network Store Interface locations

  5. check that the status is set to started and Startup Type is set to automatic

  6. If this is not the case then right-click the service and select start to start the service

  7. make a right-click the service and select Properties, change the startup type to automatic

  8. repeat if necessary for the services listed in step 4

  If you still have the problem of connection to the network or to the internet follow this steps that fixes most of the problems of connectivity.

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Disable the IP helpdesk:

  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

  2. scroll down to the IP assistance service, right-click on it and select Properties

  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

  4. then click on "Stop" to stop the service from running in the current session

  5. click on OK to exit the dialog box

  Disable IPv6:

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Disable the DHCP Broadcast Flag:

  Link: http://support.microsoft.com/default.aspx/kb/928233

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  This registry path, click the (GUID) subkey that corresponds to the card network that is connected to the network.

  On the Edit menu, point to new, and then click DWORD (32-bit) value.

  In the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  Right-click DhcpConnEnableBcastFlagToggle, then click on modify.

  In the value data box, type 1 and then click OK.

  Close the registry editor.

  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

  The only program that I'm aware of that currently relies on IPv6 is the new Windows meeting space. The first 2 changes will cause this program is not to work - but all of your normal (IPv4) connections will leave unaffected. If it causes problems that you can't overcome, simply go back to the original settings.

  To clear the DNS cache:

  Click Start, type cmd in the search box, and then click cmd in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  Once at the command prompt, type ipconfig/flushdns

  You can click on the link to try a few other network basic troubleshooting steps

  Network connection problems:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Problems of network and Vista SP2

  I read a lot of discussion and of internet articles explaining the problems with Vista SP2 update. I have 3 PC / laptop on my home network. A PC with Vista SP2 (cable), a Sony notebook (wireless) with Vista SP1 and a portable IBM (wired) with XP Pro SP3.

  The SP2 from Vista PC has several symptoms, all pointing to a single cause. I've updated to IE8 at the same time, but also have a problem with Firefox. Subsequently, but with repeated reboot iTunes downloads. Copies of files network NAS also experience time-out issues. Even ping the IP of the gateway translates to periodic messages out "request timed." This highlights a problem with the network or the IP stack drivers.

  I checked that I use the last available network driver. I also disabled IPv6. No change.
  Occaisionaly than other experiences of the peripheral issues (laptop computer IBM and Sony), but these were resolved only after the Netgear gateway is restarted.

  The network has operated in this configuration for several months without errors. The Netgear gateway running the latest firmware. No suggestions have led or has proposed a solution.

  You go to the site of the manufacturer of the device and look for the latest driver? As Realtek, IDT, or that which
  Do such unit as listed in the manufacturer of the device. Often the real device manufacturer will have newer drivers
  the system and certainly most recent manufacturer this update of drivers of in Device Manager.
  (MS is far behind the drivers of certification).

  Manually, look at the sites of the manufacturer for drivers: this for the real device manufacturer
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  ----------------------------------------------------------------------------

  Connect as long as Admin - Start - COMMAND - find on the list above.
  RIGHT CLICK - RUN AS ADMINISTRATOR

  type or copy and paste to the command prompt and press on enter after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset

  That refreshes your IP stack

  Rob - bicycle - Mark Twain said it is good.

• TOSHIBA DVGW/HD TS-L802A-ATA do not work after the update to Vista SP2

  Hello

  My devices Toshiba P200 DVD/CDROM has stopped working (code 39) since I've updated with Vista SP2.

  TOSHIBA DVGW/HD TS-L802A-ATA
  RSFOBUJ XEBG5QVCPQ7C SCSI

  I run Microsoft Fix It (http://support.microsoft.com/gp/mats/?ln=en) + "your CD or DVD drive cannot read or write media.
  But it has not solved the problem.

  I download and run the Microsoft devcon command-line utility.

  > devcon stack gencdrom

  IDE\CDROMTOSHIBA_DVDW/HD_TS-L802A___TO35___\5&31E4E654&0&0.0.0
  Name: TOSHIBA DVGW/HD TS-L802A ATA Device
  Setup class: {4d36e965-e325-11ce-bfc1-08002be10318} CDROM
  Controlling service:
  CDROM
  Lower filters:
  tdcmdpst
  5 SCSI\CDROM&VEN_RSFOBUJ&PROD_XEBG5QVCPQ7C&REV_1.03\ & 36E5972 & 0 & 000000
  Name: RSFOBUJ XEBG5QVCPQ7C SCSI CdRom Device
  Setup class: {4d36e965-e325-11ce-bfc1-08002be10318} CDROM
  Controlling service:
  CDROM
  Lower filters:
  tdcmdpst

  I guess that this lower filter of "tdcmdpst" (the writing of TOSHIBA motor filter driver) is the issue.
  But I can't remove the filter 'tdcmdpst' even with admin rights.

  > devcon classfilter lower tdcmdpst

  DevCon has failed.

  How can I remove this filter to upgrade Vista SP2?

  Kind regards

  Nicolas

  Can roll you back OS to an earlier time before installation of SP2?
  Drive works properly again?

• Satellite L300 (PSLB9A) - no internet access after installing the Vista SP2

  Just upgraded my Vista with Service Pack 2 and found that I can not connect to internet sites, have proved SP2 by rstoring to before SP2 and everything is OK, also reloaded the OS with my recovery disks and everything works OK... to - what I load SP2 then when I try to access the internet, I can't , get "IE cannot display the webpage".

  Diagnosis don't report any problems found. This happens with IE7 or IE8, the firewall is off and I can reach any network device, including my server but I am unable to load the web server page, same problem...

  Any help would be appreciated.

  Pete

  Hello

  I googled a bit and found a lot of people who reported on the same issue.
  It s certainly related to Vista SP2.
  You said you used Internet Explorer, I think you should test this also using other browsers like Firefox, Opera, etc.

• Blue screen after Windows Vista SP2 installed on my TouchSmart IQ770

  
  

  All, I came across this thread, after having the same problem (constant BSOD after Vista SP2) installed.  The fix referenced by MS that contains a placeholder file.  However, this most recent patch http://support.microsoft.com/kb/975163/ contains even more recent versions of all the files in question.

  For this installation, I went to safe mode and disabled the wireless network card.  I copied the fix of a usbstick on the desktop.  After the reboot of the machine was stable enough to install this fix (before it would break before the fix might get installed).  After the restart, yet once again, I have reactivated the wireless card.

  The system seems to be stable again (its place for over an hour now, the previous record was 5 minutes approximately from SP2)

  I hope this helps someone to another Google search for Vista SP2 IQ770 BSOD USB

• Vista sp2 keeps trying to download t

  I downloaded vista sp2 manually and now it keeps coming up as an important download falling down

  Don't have SP2 installed when you downloaded it?

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

• SE error message: "elements not found" when installing Windows Vista SP2

  Original title: error please help

  I am running vista and currently have service pack 1 to install most programs it said I must have service pack 2, although I tried to install manny time either through the window system update or if a download on the microsoft site and I sill get the messege even while trying to install "no items" and an error code weird, I searched and google ect but don't watch until someone could please help me with this as a carnt install the basic things I need for example: microsoft word-. -.

  Please help before I end up spending 200 + just to buy a new Tower

  Hi jasonv123,

  You can read the following article and try resolution 2: run the system update readiness tool and check if you can install Vista SP2.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.