Wisdom-soft .exe files are not open

I have the wisdom-soft software, which generates .exe files. I play on my computer, but when I send by email, it will not open. I sent an email it myself and Norton sends all sorts of warnings from security. I go around them and the end result is, the file does not exist. I myself made sense, because when I try to contact the author, I can't spend or I get no answers. Was, I had? The specific program is MotionStudio 4.1. I have other software of this provider, same result.

Thanks for the comments.

Tags: Windows

Similar Questions

  • .exe files are not open; affected by the Windows Security Center of lazy virus

    Hello!

    As the title indicates, none of my executables will open his; on the contrary, when I click on an icon or similar function (as in the start menu), I'm inclined to the screen 'open with... ». I noticed that most often, if I run the program as administrator, it is likely to work without having to manually find the file - still a bit tedious however.

    I'm assuming that since I was recently hit by the virus which is a fake Windows Security Center, something my registry has also been hit (take into account the fact that I'm not savvy computer in the slightest). It happened on my user account initial and rather than take action on the right, then, I decided that I would use the other account that I had to install a program better anti-virus (Norton provided ISP) than the one I had been using (the two admin). At that point, I had finished all my activity moved to the new account and it worked very well until the virus had one possessing this account as well - delete on the first user account seemed to have deleted only the effects of my account but still affected everything I did after that. This time, I went and deleted all accounts and checked to ensure that it is not at all. After getting rid of the virus, it's the same thing: none of my .exe files will open without using the monitor "open with...". ». I'm not really sure what action to take from here, I have not done much to remedy the situation, and I'm going right through the screen of "open with...". "to get to what whatever - so any suggestions or help would be very appreciated.

    Keypoints:

    • .exe files are not open (However, in some cases, the "Run as Administrator" option overrides it)
    • recently hit with (deleted) and fake Windows Security Center virus ; That's when the .exe is no longer
    • is not much in terms of addressing this problem, do not know what to do with regard to the question of if my situation calls for something specific

    I tried to cover everything that seemed important to address; However, if there is more need information, let me know. I am about average in terms of computer navigation and therefore my understanding of what many of these commands, functions and files is a bit Basic.

    Thank you! :)

    Thanks for the very comprehensive post. Run the Doug Knox fix (that isn't a .exe that you can do this).

    http://www.dougknox.com/XP/file_assoc.htm

    Then follow the instructions to delete here:

    http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

    MS - MVP - Elephant Boy computers - don't panic!

  • My .exe files are not open as they should after a virus removal and some do not work right.

    Here's the problem. I did a scan for viruses with AVG and deleted viruses from my computer. One of those annoying virus seems to be a program called Vista Antivirus that I had never downloaded or installed. I had a feeling that it was not good when she appeared all first. After that AVG has found to be a threat, he removed. This is where the problems started.

    After the removal of Antivirus Vista, my programs refuse to open without a right click and run as administrator. In some cases, like my WMP, the music and the Zune program, they do not work properly. Whenever I try to open a song in WMP or Zune, it won't play them or videos. Instead, as with all other programs, the 'Open with' window as if it does not recognise .exe files. So now you can see my aggravation.

    There is one more problem. After that I restart and login to my account and open the Task Manager to close unnecessary programs that I don't need or want to open, there are usually a whole list of them. However, as I did this virus removal, only a few main Basic programs that are needed to power the computer are open. Since most of those who opened before were .exe files, I can see where is the problem.

    Honestly, I'm stuck for what to do to solve this problem. I'll do a system restore and see if it works (and I hope it will be). If this isn't the case, I need little help and instructions to fix this annoying problem.

    Thank you for taking the time to read this and help out me.

    -iggy

    Edit: System Restore has been a success. Is there anyway I can stop this from happening in the future?

    Hi ignite444,

    Glad to hear that the problem is solved!

    Unwanted programs or virus downloaded on the computer without the user's knowledge.

    Important Antivirus software must be updated regularly to stay effective against new viruses. Most of the antivirus software are designed to update automatically, but you can also update your software manually.
    You should also keep during the virus scan regularly.

    Update your anti-virus software
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-your-antivirus-software

    check the link below for the number of Windows vista-compatible antivirus software.
    Windows Vista consumer security software providers
    http://www.Microsoft.com/Windows/antivirus-partners/Windows-Vista.aspx

    I hope this helps!

    Halima S - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Im running windows vista and office 2007. Many of my files are not open and I get the message "application not found" How can I reapir this?

    I recently had my computer repaired and Office 2007 has been reloaded. Now I get the message "not found when I try to open some files and application for a single file, «windows cannot find the file...»» ».

    If I change the name of the folder, some files were opened.

    In one case, the file opened under the new name [I added a letter], then later not open again - got the same message "application not found" and the Red Cross of death.

    Hi Martin,

    How you try to open the file? You are double clicking on the icon of the file to open or by using the menu file-> the option open in the application to open the file?

    The question is limited to Microsoft Office applications?

    You can visit these links and try the steps in the articles.

    A Microsoft Excel, Word or PowerPoint file does not open because of incorrect file associations

    http://support.Microsoft.com/kb/2464297

    A file does not open in the program that you expect when you try to open the file in Office

    http://support.Microsoft.com/kb/918957

  • NCO files are not open

    NCO files does not open

    Uploaded photos of old pc again using disc. Nero was used as it was the old pc and new pc will not open files. Windows 7 now, old pc is xp. Help. No nero on new pc, any software available to help? Thank you

    To ask what is obvious, why not put Nero on the new PC?

    Use Nero ZIP compression of backup files, if they have not been encrypted, change the name extension of * .zip.

    James Wolf MS - MVP [Multimedia]

  • . Exe file does not open and with the 'Open with' error popsup program to select

    Original title: my exe file located on my desktop and in my control panel do not open when I click on it

    My exe file located on my desktop and in my control panel will not open when I click on them calling the open window with pop and I have to choose a program to open the file, it's I think that when I was attacked by what looks like a scanning device legitimate XP security 2011. How to address this issue.

    Hi MichelleHarewood,
     
    -With what program to this problem?
     
    This problem occurs when one or more of the following conditions are met:
    • The registry values that are associated with the file name extension are corrupted or missing values.
    • The computer is infected with a virus.

    Follow the steps listed in the article given below to resolve this issue:

    Cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP-based computer

  • Shortcuts to programs, EXE files does not open (you will be asked which program I want to use to open the file)

    My system has developed a strange (and annoying) issue that no longer allows me to double click on the shortcuts of programs or EXE files.  When I do, I give myself a menu asks me what program I want to use to open the file, as if I was trying to open a file with an extension that is not associated with.

    The only way to get all the programs to run more is to right click on the shortcut and select "Run as Administrator".

    Right click on the shortcut also reveals a new 'momentum' (Yes, spelled with one S tiny) option in the menu.  I have not tried it works, in my view, it could be related to some false recently-removed security software that appeared out of nowhere last night.

    Any help to remedy this situation and get back to normal functionality would be greatly appreciated.  Thanks in advance.

    If program shortcuts are not no longer works, you will need to use a procedure special difficulty fo files .lnk (similar to the one used above with .exe files).

    Go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and select the .lnk and run it.  That should fix your shortcuts.  Or you can use the link provided above by Michael Murphy - it does essentially the same thing.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • My WinXP is damaged-exe files will not open

    Apparently damaged by VJT.exe and my .exe programs will not load or run. I get the 'Open with' box or a file not found. I am able to run the programs with the .com suffix. Please tell me what to do to solve this problem. Is this some sort of file association problem? My AVG antivirus was quarintined VJT.exe.

    Hi Systemwhiz,

    You will need to rename regedit.exe to regedit.com (my computer-> tools-> option-> view file-> remove tickmark to "Hide extension for known file types"-> ok-now right click on local disk C:\WINDOWS\ online search of regedit.exe rename regedit.com).

    Then click on Start-> Run Type &-> Regedit-> ok.

    Go to HKEY_LOCAL_MACHINE\Software\Classes\Exefile\Shell\Open\Command
    (you will have to press on + to achieve order)

    Now, double-click default slot right windows and then change the value in this box for '%1' % *.

    Repeat the same for HKEY_CLASSES_ROOT\Exefile\Shell\Open\Command

    Close regedit, restart your pc and check if its working.

    You can also check: http://support.microsoft.com/kb/310585

    I hope this helps.

  • Program files are not open!

    Help!  If after update my norton because of alleged Trojan virus security system I paid for a renewal that seemed to set all remove any virus or spyware.  However, for some reason, my programs open not even not my calculator function.  Whenever I try to open Notepad, calculator, microsoft word, any program he directs me "choose a program you want to use to open this file" or he'll say "this file has no program associated with it for performing this action.  Create an association in the control panel to set the Associations' my computer was fine before all this.  I even tried to do a system restore, but it did nothing.  None of my programs open when I use my Start menu function.  Help!  If anyone can.  Any recommendation?

    Hello

    Use above message for intense and thorough check for malware.

    To restore the ability to run any .exe programs.

    1 make a Restore Point so that you can come back if necessary back although probably not required.

    How to create a Vista System Restore Point
    http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    2. copy BETWEEN these lines and paste it into Notepad - save as exefileFix.reg - then right
    Click on it and FUSION - REBOOT

    DO NOT COPY THE LINES
    -----------------------------------------------------------------

    Windows Registry Editor Version 5.00

    [HKEY_CLASSES_ROOT\. [EXE]
    @= "exefile".
    "Content Type"="application/x-msdownload".

    [HKEY_CLASSES_ROOT\. EXE\PersistentHandler]
    @= "{098f2470-bae0-11cd-b579-08002b30bfeb}".

    [HKEY_CLASSES_ROOT\exefile]
    @= "Application".
    "EditFlags" = hex: 38, 07, 00, 00
    "FriendlyTypeName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52,------.
    00, 6f, 00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00,------.
    32,00, 5 c, 00, 73, 00, 68, 00, 65, 00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c,
    00, 2 c, 00, 2d, 00, 31, 00, 30, 00, 00, 31, 35, 00, 36, 00, 00, 00

    [HKEY_CLASSES_ROOT\exefile\DefaultIcon]
    @="%1"

    [HKEY_CLASSES_ROOT\exefile\shell]

    [HKEY_CLASSES_ROOT\exefile\shell\open]
    "EditFlags" = hex: 00, 00, 00, 00

    [HKEY_CLASSES_ROOT\exefile\shell\open\command]
    @="\"%1\" %*"
    ""IsolatedCommand"="\"%1\" %. "

    [HKEY_CLASSES_ROOT\exefile\shell\runas]

    [HKEY_CLASSES_ROOT\exefile\shell\runas\command]
    @="\"%1\" %*"
    ""IsolatedCommand"="\"%1\" %. "

    [HKEY_CLASSES_ROOT\exefile\shellex]

    [HKEY_CLASSES_ROOT\exefile\shellex\DropHandler]
    @= "{86C86720-42A0-1069-A2E8-08002B30309D}".

    [- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\UserChoice]

    --------------------------------------------------------------
    DO NOT COPY THE LINES

    If necessary:

    Check the fix of exe here
    http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

    Also check this one if it applies
    http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

    How to set default Associations for a program under Vista
    http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Carry-over from flash player .exe files, does not open on Windows 8

    So I transfer files to an old flash drive last night and find an old computer games that I put on in 2008 (crazy, right?), but the computer I had back then was a Windows Vista. So, in an effort to try to get these games back, I copied them on my current computer which is Windows 8. Whenever I try to open the game itself, the .exe file, it will have the little blue circle as if it loads and then everything stops and nothing will happen. I tried as an administrator, the same thing happens. I tried troubleshooting, and she added the "Windows compatibility mode: Windows Vista (Service Pack 2), but when I press"Program of Test,"nothing happens - it's all the same little blue circle loading, and then nothing happens." When it has detected additional questions, the additional question was 'Incompatible program'. Is that what I can do to open these game files? Or they will simply not work on my new computer?

    Hi Sasha,

    Thanks for posting your query on the Microsoft Community.

    This issue may have caused due to compatibility issues.

    I suggest refer you to the following article from Microsoft Help to install the program in compatibility mode.

    This article consists of the steps to change the properties of configuration file, and then try to install the program and check.

    http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

    THIRD PARTY LINK WARNING

    WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Hope this information is useful.

    Thank you.

  • ARW files are not open with ACR 9.1.1.  Color conversion/of DNG. You will need to upgrade to ACR 9.3.

    Hello world

    I bought a SONY camera that produces. ARW files.  They will not open in my Adobe Camera Raw 9.1.1.

    I use Photoshop CS6.

    I can't upgrade to Adobe Camera Raw 9.3 with CS6.

    I downloaded the DNG Converter and renders flat colors, dead.  I need bright colors.

    What must I do to get a version of Adobe Camera Raw 9.3?  I guess I have to upgrade Photoshop done

    this technically possible?

    Thanks for the help.

    Best always,

    James Whitlow Delano

    You can insert small images like screenshots directly into a forum post using the photo icon above where you type in the text:

    Dropbox is for sharing large files.

    Here are three screenshots...

    Native raw in C1:

    DNG in ACR:

    DNG in Mac preview:

    The only problem that you are experiencing is the overview of the DNG on the Mac is dull, but the images you create are ok?  I think that the DNG Converter is what creates the DNG preview, so I don't know how upgrading to a newer version ACR would change the DNG preview.

    What version of the converter DNG you used to create the the ARWs DNG?  You could try the last DNGC 9.6: http://www.adobe.com/downloads/updates/ so this isn't one you have used.

    Also made of Adobe and rendering of C1 would be different if it's not any problem.

  • The PNG files are not open in CS6

    I have SP6 which works perfectly since I got up this morning.  Now all of a sudden, any time I try to open a PNG in PS, I get the message "could not complete your request because the file is not found.

    I checked my preferences and png are set to be opened by the PS, and I tried many png who opened my program in the past, no problem, this is not a case of won't corrupt png.  Also, I went and replaced the preferences file in PS6 in the case that was damaged, but nothing works.  PSD and j clips are open.  The only plug-in that has changed recently is that I upgraded to photosuit On1 9.5 to 10 Photosuit On1 last week.

    Help!

    Kim

    Hi Kim,

    Suggest you to run Photoshop with the SHIFT key and click Yes to ignore the loading of plugins in option

    Then go to file > open and select the PNG file to open

    Apart from this, you might also want right click / Control click on the PNG file in file Explorer / Finder and choose open with Photoshop.

  • RAW files are not open in Elements 8

    I downloaded and installed several actions for elements8 this afternoon.  I also downloaded a couple for photoshop which were auto install.  I clicked on landscap_and_sky_action_by_fcpr, rar.  I thought it would open and I could install the action like others.  Apparently, it is installed as if\t was supposed to (just in the woring program.)  Some little time after that I tried a new RAW file downloaded from my camera at home.  I got the error message, failed to open (file name and full path), because it is the wrong type of file.

    I tried to open raw files with the file open and file open as specifying that the file is a raw file.

    I also tried to open an older RAW file with the same results (previously opened before today).

    This is the first time I had this problem.  I've been using RAW files for the last year and a half without any problems.

    My best guess is that rar file corrupted a file somewhere, but I have no idea where.

    Finally, I uninstalled items 8 and reinstalled.  The same problem.  I noticed that during the uninstall of the elements, it does not erase the directories and many files.  I have hestiated because I have a massive set of photos in the Organizer, have updated the Camera RAW database (after it worked) and added several features (effects) to the elements.

    Any suggestions on a fix.

    Ed

    Sometimes I more think that solutions.  After backup of the organiser, who needed to do anyway, and get a good nights sleep, I had an idea.  Why not replace the Camera RAW 6.2 file and see if that fixes the problem.  Yes he did.  Camera Raw works as if should be, and I don't have to replace all these add-ons.

    Thanks for all the help.  Barbara you were on the right path, speaking to the Camera Raw files that give me probably inspired for the replacement.  I noticed that on my computer the camera RAW file was not exactly the location given by Adobe.  It is under Programs86 instead of programs.

    I'll close this discussion.

    Ed

  • recently some gif files are not open. Get all the white screen (white)

    Experience the problem on a few sites. problem started about 1 week ago. newly installed Firfox 4 and conducted an analysis of the registry using the may/may not be a problem.  RegCure due to the performance of slow computers. Had done this earlier analysis without any problem of gif.

    Hello

    The problem is specific to Firefox and "couple of sites?

    If the question is referring to the GIF is not opening in Firefox, I would have you contact firefox for better aid.

    http://support.Mozilla.com/en-us/home

  • My d7200 nikon NEF files are not open in Camera Raw in CS5.  Help, please!

    I'm trying to update Camera Raw 6 version 9.2 for CS5 as ACR does not now read my NAVE of Nikon d7200 files.  Any suggestion or help would be appreciated!  I need to upgrade to CS6 or y at - it an update for CS5?

    Hi jennifern87216455,

    Nikon D7200 files would not be supported in version CS5.

    You can either upgrade to CS6 or CC version to get the latest version of Camera Raw, or you can install the free DNG Converter to convert your raw files to DNG and access then in Photoshop CS5.

Maybe you are looking for