With 7310 & 7410 duplex printing

Similar Questions

• Problem with margins in duplex printing

  I have two HP all-in-one printers (6700 OfficeJet and OfficeJet Pro 8500 a).  Both have the ability to print double-sided.  Both print a document of single-side with correct margins.  However, duplex two printers add additional margins to the document and compress the type.  This can be corrected?  This is a real problem to print documents folding and tri-fold.

  Hey RLBoush,

  I've seen other messages on this problem, and people have found success using a 990c driver. Please see Shane_R thread on the use of another driver located here.

  I would like to know how this happens.

• Vista/Windows 7 Patch for Officejet 7210 7310 7410 and Photosmart 2610 2710 Duplex

  Some models of printer with automatic duplexer print not correctly on the back in Vista (or Windows 7 if Vista update).   In these models on the back is printed updside down regardless of the driver configuration.

  attached the zip file has a patch and instructions to fix this problem for the following printers:

  OfficeJet 7210

  OfficeJet 7310

  OfficeJet 7410

  OfficeJet L7300

  Photosmart 2610

  Photosmart 2710

  Patches for other models can be found here.

  This patch has been tested good, with more than 1,800 copies of this fix distributed by e-mail since April 2007.

  The zip file contains two files

  OJ7410.PDF contains detailed instructions for applying the correction.  Opening this file requires Adobe Reader or a similar pdf viewer, available for free download.

  hpo7x00t. GPD is the current patch file.

  To apply the patch download the here attached zip file.  Extract the files in the %Temp% directory, and then open the OJ7410.pdf file and follow the instructions.  If you have trouble finding the folder directory you can find this directory by opening your 'computer' folder and type folder in the address bar.

  tomscnorth wrote:
  Windows 7 driver is not automatic duplex printing. "The options are manual, or a booklet * two or more pages per page. How can you print a page by on the side of double-sided automatically?

  In fact, the driver of Windows 7 made good automatic duplex printing - no patch is required for Windows 7 [edit - this is true for fresh installation.  For the versions of Vista the patch may be used for Windows 7].  The default value for some printers, is that the duplexer is 'not installed', please check the Duplex Printing Troubleshooting Guide for Vista.  In Windows 7, the procedure is slightly different, in the folder printers click twice on the 7410, double-click the icon 'Customize your printer', device settings and under installable options go "Duplex for two back" on installed, OK.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• M651dn: with manual duplex printing only the paper size custom

  Hello

  I have a strange problem with several HP printers in my office (cp4525dn, 401dne, M651dn).

  Automatic duplex printing works as usual if I use plain paper A4 format.

  But when I use a custom paper size (21 x 21 cm), then the 'duplex manual' appears on the screen with the information I need to deliver the document again.

  It's strange. -That someone has an idea if this could be a bug or it's 'normal '. But automatic duplex should work too much here, I think. What you mean?

  It makes no difference if or USB-connected to the local network. I also tried different drivers, without success.

  Thank you very much

  Daniel

  According to the manual the User Guide Laserjet Pro 400 M401 , automatic duplex printing is not supported for custom paper sizes.

  

  It goes the same for my printer LaserJet Pro 400 MFP M475dn .

  I guess the same applies also to CP4525dn and M651dn models.

• Photosmart 7520 Duplex printing with A5?

  Hey well informed friends HP!

  I have been working on a book-type project and am ready to print. Unfortunately, now that everything is set-out (in Mellel) and I bought the paper (from England!), my Mac (OS 10.6.8) does not want me to print my book on both sides of a sheet of A5 with long edge binding. I hope that there is a sort of Workaround available that will allow me to do that; scaling my layout isn't really an option at this point. Please tell me I'm not outta luck and I'll be able to print my book!

  Thanks in advance for any advice you can offer!

  Hello

  The accessory automatic duplex support only formats of A4 paper, letter or legal due to hardware limitations.

  A5 paper size, you can perform copy double-sided print manually using the Pages of print options.

  Follow print on both sides of the paper manually below to perform a manual duplex print job:

  http://support.HP.com/us-en/document/c01663233

  Shlomi

• Color LaserJet Pro 200 M251 nw: unable to do manual duplex printing with Windows 10

  Using my prior desktop computer that ran from Windows 7, I had no difficulty to do manual duplex printing on my HP LaserJet Pro 200 M251 nw color.  However, having recently bought a new desktop computer running Windows 10, I have more two-sided printing option.  Instructions to Guide the user to http://h10032.www1.hp.com/ctg/Manual/c02886939 are unnecessary because I cannot complete step 3, click Finish.  After completing the first two steps by clicking on file - print and then click Properties or preferences, I am not provided with an option to "print on both sides (manually)" as described in the User Guide.  How can I get manual double-sided printing capability on Windows 10?

  Usually when you have a driver problem, it is best to find the current driver on the HP website, disconnect the printer from your PC, remove the existing driver, and then install the current driver.

  Windows often installs drivers that do not support as many features as the downloadable driver.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• D7360 automatic duplex printing is not available with the latest driver

  D7360 automatic duplex printing is not available with the latest driver

  Hello ephsh,

  Welcome to the HP Forums.

  I see that you have a question to try to make some duplexing.

  So I can better help you, please answer with the operating system that you are running:
  Operating system Windows am I running?
  Mac OS X: how to find which Mac OS X Version is on my computer?

  I will attach a document that addresses an double-sided printing Option is not available even if an Automatic Two-Sided (duplexer) printing accessory is installed.

  Please do not hesitate to write me again at your convenience.

  See you soon,.

• Color Laserjet 2605dn: duplex printing with UPD

  The universal print driver that runs on Windows 10 (64-bit) does not recognize on my Color Laserjet 2605dn duplex printing function. drivers passed under older versions of Windows enabled this setting on the Advanced tab.

  Is there a way to enable or UPD grants only limited functionality and does not support the duplex feature?

  Hello

  in devices and printers click on the right button the printer UPD icon and select printer properties.

  In the device settings tab, verify that the accessory set duplex as installed and check for the difference.

  Please let me know if this can help,

  Shlomi

• I can't automatically duplex print with my HP Photosmart C7280

  They only options I have is for manual, left or right edge.  In the past, I could choose to do duplex printing automatically.  the printer has a duplex magazine.   I tried several times to reinstall the drivers/software does not.

  I use Windows 7 Professional 32 bit.  I get no error message.  I have

  The duplexer must be set to "installed", as described in the Vista/Windows 7 Duplex Printing solutions to the problems here.

• 6980 HP on network, no two-sided printing unit equipped with Windows 8 Pro. Not available manual duplex printing

  Windows 8 picked up my network printer and installed the drivers very well.

  When I go to print, "manual duplex printing" is not available on PRINT ON BOTH SIDES.

  The only option is 'off '.

  Went through Control Panel to CUSTOMIZE YOUR PRINTER and manual duplexing is enabled for this printer!

  Kind regards

  Richard

  PS works fine on my machine windows 7 on the same network

  New driver for 6980 downloaded automatically by windows 8. Now works fine

• HP OfficeJet 7612 e - AIO: DUPLEX PRINTING OPTIONAL & STANDARD

  Hello

  What does the 5.Lubrication Duplex printing means for HP OfficeJet 7612 e - AIO.

  Hello

  This means that a user can choose to buy it separately (as an option).

  The owner of a HP Officejet 7610 can buy the duplexer (optional) to activate automatic duplex printing.

  The HP Officejet 7612 comes with the duplexer as standard (in box)

  Hope says.

• OfficeJet 4500 G510n-z: duplex printing does not

  It works with word, but not with PDF pages.  It prints and when I press the button to continue printing allowduplex printing - nothing. I used Dr. print and it says working properly, but it's not.

  Hello @cash2,

  This is a great place to visit for a community support and HP! I see that you have questions of duplex printing PDF documents. But you can duplex by using Microsoft Word. I wish I could help you.

  Please try the steps outlined in this document to see if it will help: Print PDF as an image.

  I have also provided a document for duplex printing: printing on both sides of the paper.

  If the issue is resolved, your welcome to show your appreciation by clicking on "Accept as Solution" and the "Thumbs Up". Let me know how make you out. Thank you.

• Win 7 says module duplex printing not installed while it is installed

  Windows 7 Ultimate 64 bit. HP Photosmart C6280 is connected to the USB port.

  I followed the steps to set the option to print double-sided on "Installed" in the printer properties and automatic duplex printing in the book save the printer preferences section. However, when I print a document, I get a message that says:
  "Missing automatic duplex printing module.

  "The document has been configured using the Automatic Two-Sided Printing Module, but module is not installed in the device. The document will be printed recto. »

  I know that it is installed in the printer, because I was able to print duplex when the printer is connected to a Windows XP computer. But since I've upgraded to a new computer with Windows 7, there is no more automatic duplex printing.

  What can I do to fix this?

  Kind regards

  I whent to a UDP driver on the HP support site, but my model C6200 series printer does not appear in the list of supported printers.

  in any case, I despair, I've not unhooked the printer and its drivers. When I connect the printer back, Windows installed the drivers and the duplex now printing.

• HP laserjet 1020 how disable duplex printing

  I've updated mny Laserjet 1020 driver on Windows 7 and now the printer default to double-sided printing, but I don't want this option turned on. I can't find any property where I can disable this default value.

  Glad to see that you have solved the problem. Just to make this clear solution for everyone... I have attached a screenshot and the directions below on how to cut manual duplex printing...

  Go to your printer icon. Click Printing Preferences. Click on the finish tab and make sure that:

  1. to print on both sides (manually) = checked. You can get a pop up with each print job after that, so beware

  2. NOT to print on both sides (manually) = unchecked.

  Additionally, make sure that when you print a document that your game your appropriate printing preferences by clicking on Print Properties (from the application you are printing from) and then making sure the impression on both sides is clicked or says no

  

• HP Officejet Pro 8500 a Premium: HP sides selection (duplexer) printing accessory not preserved

  I use OS X Yosemite (version 10.10.3).  June 19, 2015, I've updated the printer HP Software Update (version 3.1).  System Preferences > Printers & Scanners > Options & supplies > Options, select the accessory of HP print two-sided (duplex unit).  My willingness to printer, duplex printing, however, the option selected "HP" accessory to print double-sided (duplex unit) is not preserved-, it is up to the default unchecked.  I need to check this option, whenever I print, or is it possible to have the saved option?

  Hello

  Try resetting the printing system and check to see if that can help you:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Some Printers & Scanners.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Click on the sign more and add the printer again.

  Click the menu drop-down use and select the model of the printer default AirPrint option instead.

  Search for now no difference.

  Shlomi