with the 2009 macbook memory upgrade

I have a macbook end of 2009 (white uni-pate). It has 2 x 1gig memory cards. This can be improved? Very slow.

Thank you

It can be upgraded to 8 GB. Click here and follow the instructions.

(140196)

Tags: Notebooks

Similar Questions

  • Can I use an SD card with the new MacBook?

    Looking to buy a new MacBook. From what I can tell there is no SD card reader.  I don't see any accessory adapter for SD readers either.  Is it possible to use an SD card with the new MacBook?  Thank you!

    Only I can find is for iOS devices > > http://www.apple.com/shop/product/MJYT2AM/A/lightning-to-sd-card-camera-reader?f node = 91

    On the SDXC - Apple Support and SD card slot

    I hope someone will find an adapter for you.

  • Problems with the new Macbook pro 15' maxed out

    Here's a quick post about my experience so far with the new macbook pro. I just got a brand new fully maxed out in spec macbook pro 15 inch 1 to SSD 16 GB RAM AMD R9 370 m GPU (set to automatic switching is not always) and a 2.8 to 4 GHz i7. I turned on and set it up which was nice and took 2 minutes. Then experience decreased a little when I saw an EST 05:36 hours of battery life remaining to 94%. So I loaded 100% and it is still 60% of battery life announced and no program running that I literally just signed a brand new machine.

    Then I tried to use the migration wizard to import a backup of my iMac 5 k so I can do everything on this clone for my laptop. After having successfully connected (he told me if my password for time machine was incorrect or not) it froze and did nothing, continue did nothing.

    Then place had to call support, was a guy on the phone in 30 seconds and I unplug and restart the machine time, always that same question so I transferred to a guy with "more training". The new guy I could say knew a little more and knew that I knew how to set my password or if I walked in their properly for a bit but they all have been set for the same password just for this. I created a second admin account called "test" under his leadership, and when the migration assist froze on this account, he was surprised and proceeded to transfer me off.

    I preceded to restore fully the machine into thinking that my account setup is causing trouble with the migration assistant, and it turns out that the closure of that laptop it can only continue to 'download additional components', while that connected for 30 minutes so all last night was wasted, and now I guess he's got 5 left 12 hours to download original 'things '. Keep in mind that I can download 5 GB in one hour... After he wake up this morning and ending up where I left it last night :/ he says 84 hours go, now 72 and 51 and it is not updated even once in seconds, it took 20 minutes to 84 minutes to 51, it's literally a day 2 reset extravagance or what? Just to download it I can only imagine the actual plant until I can install my programs.

    The cost of the laptop was about $3600 but paid ~ $2900 after headphones were included and $250 off for delivery to students and other issues on the agenda of the process itself that is not my complaint, what happens, but sitting with a new camera and support useless just to ask me if I can use actually tomorrow at this price are unacceptable.

    I would like to continue using it for a while.

    You can try to reset the SMC http://support.apple.com/kb/ht3964

  • Need advice. Weather a small wacom tablet will be adequate for photography photoshop, or should I buy way. I want to use with the 13 "macbook pro

    Need advice. Weather a small wacom tablet will be adequate for photography using photoshop, or should I buy way. I want to use with the 13 "macbook pro

    If you carry your computer in a bag that is made for a 13 "laptop, the small tablet will fit as well. I have done this and found the small tablet to work properly. However, I found a screen 13 inches of being terribly cramped for using Photoshop.

  • Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

    Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

    Check your hosts file.

    help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • How to Lr3 and CS5 upgrade to be compatible with the new Macbook Pro retina display

    I think that Adobe recently released updates for Lightroom and CS6 that make them compatible with the retina display.   First of all, is that correct, and second, if I Lr3 and CS5, how to?   I know it's a stupid question.

    Annmaxine21 wrote:

    I think that Adobe recently released updates for Lightroom and CS6 that make them compatible with the retina display.   First of all, is this correct

    Yes, that's correct.

    The following includes support for the retina

    Photoshop CS6 13.0.2 (perpetual license) and Photoshop 13.1 (members of cloud)

    http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5448

    4.3 Lightroom (library modules and develop) http://www.adobe.com/support/downloads/detail.jsp?ftpID=5520

    Annmaxine21 wrote:

    If I Lr3 and CS5, how to?

    Either you pay for upgrade to Photoshop CS6 and Lightroom 4

    http://www.Adobe.com/products/Photoshop/buying-guide-upgrades.html

    http://www.Adobe.com/products/Photoshop-Lightroom/buying-guide-upgrades.html

    or can join you the creative cloud of a monthly fee and download the updates included in your subscription

  • Problem with the mail application after upgrading to El Capitan

    Hello

    I've recently updated to snow leopard at el capitan on a 2009 macbook pro.

    I can't send e-mail from the mail since the upgrade application.

    Incoming mail server address is grayed out in the settings preference of apps under 'Account Information'. It reads "p02 - imap.mail.me.com. My full username iCloud is also grayed out. It doesn't seem to be a way to fix this. I believe that the correct server address should be "imap.mail.me.com".

    The outgoing server address is "stmp.mail.me.com".

    ICloud Drive switch makes no difference. I also tried to remove the iCloud account on the 'Accounts' page under preferences app mail and setting up the account again. Also makes no difference.

    I can send emails with mail on my iPhone application and receive emails on my mac and iPhone.

    Any suggestions on how to solve this problem would be greatly appreciated.

    See you soon

    You go to System Preferences-> Internet accounts to fix the details of the server. These things are more fixed inside the Mail application. It may seem strange, but it makes sense, since the accounts are used for email and other services. Now, is there a central location for this.

  • External monitor (projector HDMI) not recognized in CC AE or AE CS6 with the new Macbook Pro

    You have a very difficult problem that maybe someone can help me find a solution.  I had an old Macbook Pro (2009-ish) I was using with AE and my HDMI projector to do the work of projection mapping.  The laptop computer motherboard used recently (not linked, I don't think) but now I bought a new Macbook Pro and am trying to use the HDMI output to the projector as my external monitor in After Effects (I tried both CC and CS5.5 and CS6). Under Preview video it does not appear as an option to send to (the choices are computer monitor only or Firewire).

    I'm a mess that I'm supposed to do a show tonight with the installation I did many times with my old Macbook and AE and now can't do it at all. I have to be able to have the projector receive EI feed - and nothing I've done so far has helped. The system sees the projector, then why doesn't AE?  I can't drag the window of the program in the projector window space and expand - there must be exactly 1920 x 1080 in order for me align correctly.

    If there is Adobe TAPI people this morning, I'd CERTAINLY appreciate your comments, as well as any other person who might have had similar problems. It should work, it should be a no-brainer. Right now I'm running a new STANDARD Apple Macbook Pro with HDMI output and the latest version of AE CC with all updates done. Please, please help!

    Thanks in advance,

    Bill

    After Effects does not come with components for an HDMI output.

    Your other computer must have installed additional components that adds this functionality.

    See this thread for more information:

    http://forums.Adobe.com/thread/1006705

  • PCI1424 - invalid buffer with the acquisition of memory on-board triggered

    Hello

    I need to capture 2 images in a very short interval using a PCI-1424 and a camera Kodak/Redlake. I have to use the amount of memory shipped to capture images. Using the example

    \National Instruments\CVI\samples\IMAQ\Ring\ring mem.prj on board, I added the following code in "int CVICALLBACK Ring"

    Open a session and an interface
    imgInterfaceOpen (intfName, &Iid);)
    imgSessionOpen (Iid, &Sid);)

    ADDITIONAL CODE to TRIGGER

    RES = imgSessionTriggerConfigure2 (Sid, IMG_SIGNAL_EXTERNAL, 0, IMG_TRIG_POLAR_ACTIVEH, 5000, IMG_TRIG_ACTION_BUFFER);

    When the program is run, a timer checks whether there is a valid buffer:

    int CVICALLBACK Imaq_loop (int, int int event, control panel,
    void * callbackData, int eventData1, int eventData2)
    {
    / * definitions here * /.

    static int unsigned lastBufNum = 0xFFFFFFFF;
     
    switch (event) {}
    case EVENT_TIMER_TICK:

    imgGetAttribute (Sid, IMG_ATTR_LAST_VALID_BUFFER, & currBufNum);
    If ((currBufNum == lastBufNum) |) (currBufNum is 0xFFFFFFFF))
    return 0;

    On my old NT system with NOR-IMAQ 2.2, the value of & currBuffNum form imgGetAttribute was always 0xFFFFFFFF, until the first trigger has been received, so basically, return 0; has been performed until the first trigger.

    On XP with NOR-IMAQ 4.0 the first value of currBufNum is always 0 and the call

    imgSessionCopyBuffer (Sid, currBufNum, CopyBuffer, FALSE);

    waiting for the trigger occurs... with side effect, that the image is not really in the buffer 0.

    Is this difference between the IMAQ2.2. and intentional 4.0 or am I missing something? \

    Concerning

    Roland

    I've found a workaround. I use the function

    ImgErrCode = imgSessionStatus (sessionID, & status & currBufNum);

    Instead of

    ImgErrCode = imgGetAttribute (sessionID, IMG_ATTR_LAST_VALID_BUFFER, & currBufNum);

    In this case, currBufNum is 0xFFFFFFFF, until the first image is saved.

    Roland

  • Can not find the driver for Deskjet 4180 with the new MacBook Pro and OSX10.9.4

    I can only find 4100 series that does not install.

    Ideas?

    Hi sensho.

    Welcome to the HP Forums!

    I see you are trying to find the driver for your HP Deskjet 4180, with a new MacBook Pro with OS X 10.9.4, and I am happy to help you with this driver issue!

    Please take a look at this website, OS X Mavericks v10.9: installing and using the printer on a Mac.

    Hope this is what you are looking for and have a great day!

  • HP c310a with the new macbook Air with os x 10.8

    I just bought a MacBook air. I've migrated everyting for my macbook pro (which worked fine with the printer). I could feel air but cannot scan. When I run the app to scan I was following:

    HP Scan cannot be opened because of a problem. Check with the developer to make sure that HP Scan works with this version of Mac OS X. You may need to reinstall the application. Don't forget to install the updates that are available for the application and OS X.

    Click report to display more detailed information and send a report to Apple.

    What should I do next.

    OK, have you tried scanning with picture Capture in your Applications folder?  Start it, click once on your scanner on the left, click "Show details" on the bottom.

    Choose the type of PDF format, then check the box for "scan multiple pages into a single document.

  • Upgrade Windows 7 Home Premium with the Professional Windows 7 upgrade software?

    I got a deal to get the Windows 7 Professional Upgrade for $ 100, thought that I get it.  Only now I realize that I had Vista Home Premium on my laptop, and so impossible to move to Windows 7 Pro.  I went out and bought the Windows 7 Home Premium Upgrade today for another $ 100 to upgrade.

    Basically, can I use this software to upgrade Windows 7 Professional upgrade the copy of Windows 7 family upgrade that I just bought. If I can do:

    Windows Vista Edition Home Premium< windows="" 7="" home="" premium="" upgrade="">< windows="" 7="" professional="">

    I hope I explained this correctly.  I don't want to really not get stuck with a copy of Windows 7 Pro upgrade software that I can't do anything with.  Any help would be incredibly useful.

    If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. Click Start, type Anytime Upgrade, follow the on-screen Wizard, enter the key to Windows 7 Professional on demand, click on, and then restart your computer when you are prompted. Less than 10 minutes, you should be upgraded to Windows 7 Professional and your files and settings retained. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

  • CS5.5 uninstalled with the new MacBook Pro retina

    I bought CS5.5 earlier but he couldn't put it on my computer because it was not compatible.  Now I just bought a macbook pro with the retina display and is not an optical drive to install my cs5.  I looked on the website of adobe for a cs5.5 trial download to save my program there, but all I see is cs6.  Can I download CS6 and always use my serial number of my box for the CS5.5?  Or should I bite the bullet and buy an external optical drive?

    Thank you

    You cannot use cs6 with a serial number of cs5.5.

    Go here and download the appropriate cs5.5 trial: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html

  • PB with the 9.4.2 upgrade acrobat reader

    Hello

    I have a problem, the 9.4.2 upgrade. This is not the first time that a upgrades. I would like to create a package 9.4.2 of my company.

    I download the file from http://www.adobe.com/support/downloads/new.jsp

    Adobe Reader 9.4.2 update - multiple languages10.6 MB

    08/02/2011

    I use 9.4.1 installation drive (i.e. an i previously download Adobe).

    I spend (but not install) of this facility. now I have in my directory temporary (document c utilisateur\Local settings\adobe\9.4) some files that I copy for example c:\adobe directory. After that

    I run this file like this:

    MsiExec.exe /a AcroReader.msi

    Installation ask me to put the file that I decide (for example c:\adobe).

    After that, I copy the file (9.4.2) AdbeRdrUpd942_all_incr.msp in the adobe directory.

    Now, I have compiled installation:

    msiexec /a AcroReader.msi /p AdbeRdrUpd942_all_incr.msp

    Give me a new Setup with the package 9.4.2.

    I'm doing this for all the previous excavation of acrobat reader (9.1, etc...) and is always working.

    I have this error:

    "The file 'Adobe.Reader.Dependencies.manifest' cannot be installed because the file is not found in the file 'Data1.cab' CAB. This may indicate a network error, etc...

    so, it does not work.

    Can someone help me?

    Thank you

    Frédéric DENIS

    Thank you all to confirm that AIP is working for now you. Just to make things a little more 9.4.2 clear, application patch more 9.4.1 AIP is not a supported workflow (as suggested by judicus in this post). Please read the document below for more details:

    http://kb2.Adobe.com/CPS/498/cpsid_49880.html

    • Version 9 run AIP recommended configuration

      Acrobat

      9.0.0 > 9.1.0 > 9.1.2 > 9.2.0 > 9.3.0 > 9.3.2 9.3.3 > > 9.4.2 9.4.0

    Adobe Reader
    • 9.4.2 AIP: 9.4.0 9.4.2 >
    • 9.4.1 AIP: 9.4.0 > 9.4.1
    • 9.4.0 AIP: 9.4.0 (Adobe Reader 9.4.0 is a full installer. Create Adobe Reader 9.4.0 AIP of the installer msi Adobe Reader 9.4.0)
    • 9.3.4 AIP: 9.3.0 > 9.3.2 9.3.3 9.3.4. >
    • 9.3.3 AIP: 9.3.0 > 9.3.2 9.3.3 >
    • 9.3.0 AIP: 9.3.0 (Adobe Reader 9.3.0 is a full installer. Create Adobe Reader 9.3.0 AIP from Installer msi Adobe Reader 9.3.0.)
  • Problem with the creation of catalog upgrade to LR3

    Hello world

    Upgrade to LR3 tonight and I'm having a problem with the creation of the catalogue. I had 2 choices during the implementation and what I chose created a LR2-2 cat. I thought he was going to update my LR2 cat in a new Cat LR3 (as when I went to v1 to v2), but it didn't happen. I uninstalled and tried again, but is never given this choice to Setup again.

    So, how can I roll my current cat of LR2 in a new LR3 and use that to proceed? I have to do an export and merge?

    Thank you!

    This catalogue of LR2 - 2 is a copy of your old catalog, updated to the LR3 format. In other words, it's what you want.

    CTRL + O to open the catalogue and go ahead to use it.

Maybe you are looking for

  • If I use check my spelling as I type, is this just local?

    If I use "check my spelling as I type", which is only local, or this connection - is online somewhere and transmitting what I type to see if it is correctly spelled? Just double check...

  • Cannot restore Y500 - missing partition Recovery.

    I had two of the same OS Windows 8.1 on my Y500 (cloned from the original SSD). Then, last night I tried to 'refresh without affecting your files' option for my OS on the HARD drive so I have a new OS to go back to incase anything happened. then on t

  • Hexadecimal number to hex string

    Dear moderators of Labview and experts. I'm looking for a simple tool, but could not know. Could you help me? I want to convert a hexadecimal string, Hex number unchanged. I mean digital Hex display shows E8 and I convert it to a string and I have Op

  • Has anyone tried using the cw3dgraph in WPF?

    Has anyone tried to use the CW3DGraph with a WPF project? I guess you need a WIndowsFormHost? If yes I do not know how you would connect into it. I control in my project reference but I don't know how I would refer to it on a window.

  • Configure NLB on the NPS Proxy Server in windows 2008 R2

    Hello We have Proxy 2, NPS 2 NPS server and we have planned for NPS Proxy implimet NLB cluster, so RADIUS Client can use of NLB IP address for communication rather than 2 NPS Proxy address. We have configured the NLB on the NPS Proxy, Clients RADIUS