With the family to Apple music subscription, must be the same Apple that use all the devices ID?

I want to make a family membership at Apple ID, but do not want to use the same identifier Apple on registered devices.

your question is a bit difficult...

each device can use their own separate Apple ID but be part of the same family.

Tags: Apple Music

Similar Questions

  • Why use my original USB cable charger for more than a year now is startig to show a sign that it is not compatible with the device? o

    I used without problem my USB cable for over a year, it is original Apple and yesterday began to show a sign that it is not compatible with the device. How can not be supported if it's Apple.

    This can occur if the cable is damaged in any way. See: recharge your iPhone, iPad and iPod touch - Apple Support for more information.

  • Problem of the printer, I get "the computer is unable to establish two-way communication with the device.

    Original title: printer problem

    "The computer is unable to establish two-way communication with the device. I have pluged a all cables and pluged in that they return.

    Hello
     
    1. What is the brand of your printer?
    2. when the question is is produced?
    3. you remember to make changes to your computer before the problem?
    4. when exactly you get this error?
     
    I would temporarily disable all security software and check if the problem persists.
     

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
     
    Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
    If you have an HP printer, you can consult the links below.
     
     

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Unable to connect to the wireless network, Windows error cannot communicate with the device or the reaource (primary DNS server)

    Original title: internet connection problem

    Hey,.

    I use a wireless connection at home, it works very well in my android and apple gadget, but it does not work for my laptop. It is said:

    1. Windows cannot communicate with the device or the reaource (primary DNS server)

    2. the connection between the Internet and your access point, router or cable modem is broken

    3 problem with access point or wireless adapter

    I think it's an effects of virus or something?  Because yesterday it works really well. How can I fix? Thank you very much

    Hello Hildegard Lydia,

    You may experience this problem for a number of reasons. Some common problems that can cause these problems are: drivers damaged or incompatible, updates missing, network connection settings, hardware problems or software or TCP/IP can sometimes be damaged or corrupted.

    What is the brand and model of your computer?

    Please follow the steps mentioned below:

    Method 1: a component of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.
    I suggest you try to reset the TCP/IP stack.
    http://support.Microsoft.com/kb/299357

    Method 2:

    I suggest that you refer to the following link:

    Why can't I find a wireless network?

    http://Windows.Microsoft.com/en-CA/Windows/cant-find-wireless-network#1TC=Windows-7

    Method 3:

    See the steps in the following link and check:

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Please an update on the status of the issue to help you further.

  • What are the causes of error - OR-XNET: the NOR-XNET driver is no longer can communicate with the device.

    Hello

    I use X-NET-PCI8512, OS: Windows 7, C++ (middle of the QT interval).

    I'm pooling of card data (StreamIn member function) to ~ 100 Hz. card reading time (ReadStatus) to ~ 100 Hz.

    After about 40 min (depends on the amount of data in) I get this error:

    (Hex 0xBFF630B2) The NOR-XNET driver cannot communicate with the device. Solution: Make sure that the device was not removed from the computer.

    What are the causes of this error?

    Thanks in advance,

    Aviad

    Hello aviadCielo,

    When you get this error, what does do to make it work again? If you restart your program, start all this work?

    Secondly, what version of NOR-XNET do you use? It's maybe a software problem that could be resolved by upgrading to NOR-XNET 1.6.

    Finally, can you reproduce this problem with a simple program? If so, you can join the program you use?

  • Computer HP laptop, computer cannot establish communication in both directions with the device (printer)

    HP laptop, Windows 7-64 bit, no changes to the system before the problem occurred.

    Printer: HP Photosmart Plus B210a all-in-one series.

    When I click on my ink for my printer in my computer, it goes to 63% and stops. Then, he said. The computer is unable to establish communication two-way with the device. All systems are running, and there is no reason that I have a problem.

    I can print, Fax and Scan, I get blank printer paper, printer is not stuck, nothing in the queue to prevent it from printing. It will not just show my ink from my computer.

    Just try to uninstall the printer from Control Panel drivers and reinstall again.

  • Error "Unable to establish two-way communication with the device" Windows 8 with c309g

    Operating system: windows 8, 64 - bit

    computer: desktop

    Home network: network, the computer is on a wired connection, printer is on a wireless connection

    error message: "the computer is unable to establish two-way communication with the device.

    • When you install first of all my husband's new computer, we were able to install the software and connect the printer very well, and the printed test page.
    • A few days later, I installed the HP ePrint app on my iPad, found our printer and tried to print a page of a Web site. Printing failed, and the iPad app gave a message something like "the Word document may be printed." I cancelled again tried the iPad app, print work, and has not yet. I had not heard of AirPrint, so I did that on my iPad.
    • We tried to print the page of the computer instead, but the task has failed.
    • We looked at the parameters of the printer through the computer of windows 8 and found that there are two differently named c309g printer now displayed in the printer list.
    • My husband uninstalled the printer software, the computer restarted and reinstalled and then got the "the computer is unable to establish two-way communication with the device.

    any ideas on what to do next?

    My brilliant husband fixed it. Power cycling the router.

  • Software BlackBerry Blackberry Link fails to communicate with the device

    I hope that there could be some additional elements that could help with a problem I've seen with BlackBerry link. We have a user who has three computers he uses to back up his passport for Blackberry (depending on its location at the time). A laptop has started to display the communication error, it is stated in the subject line. BlackBerry connection on two other devices have no problem of communication with the phone.

    The device works on OS 10.3.2.2474, although the issue does not appear to be tied to a software update. We confirmed that the user was able to save his device to the affected machine after it has updated to this OS level.

    Initially, when it connects the device to the computer, the BlackBerry Device Manager does not detect a connected device. After change of the cable USB and the realization of step 2 below, the Device Manager and link show the connected device. However, the link always displays the communication error. The user is a local administrator on the system.

    I tried the things:

    1. update to the latest version of link.

    2. retrograde to Blackberry link 1.2.3.56, which is the version installed on two systems of work.

    3 uninstalled link 1.2.3.56 and performed a manual cleanup of old files, such as noted in Blackberry KB35666 http://support.blackberry.com/kb/articleDetail?articleNumber=000035666&language=English, to delete the files from the driver to the previously installed version.

    4 reinstalled link 1.2.3.56, which gave me a perfect match for all the drivers on the affected system and two systems of work.

    5. manually created firewall rules that appear on work mDNSResponder.exe, nginx.exe and tunmgr.exe systems. The application for peermanager.exe rule created on an affected system.

    6a played with .NET. The system was originally installed 4.51. I uninstalled and installed 4.0 (which is the version required by the 1.2.3.56 link). Later, I've upgraded to .NET 4.52.

    7 off completely Windows Firewall and antivirus on the system. Neither touched the issue.

    8 connectivity test using another profile of Windows user on this system and later another device Blackberry OS 10. Reproduce the issue with the two tests.

    9 Ran through all the other suggested steps in the article noted in step 3. An oddity I noticed during these controls: under the Windows user profile, I am unable to ping the IP assigned to the device. This prompted the tests with the Windows Firewall and AV out. However, when we tested with a different user on the same system (with Firewall and AV) on profile, we are able to ping IP assigned to the device. This allows however for us to communicate with the device via link, however.

    Not to mention that the redefinition of the system (which, in my opinion, is far too radical to get this software to work), I hit a brick wall with items to check then. Has anyone else experienced this problem and it is resolved through a different way? Any comments would be greatly appreciated.

    Well, I guess everything he needed, it had happened to a point where I thought I was out of options. We finally got this device communicating by link.

    I had run across this article during my first troubleshooting http://support.blackberry.com/kb/articleDetail?ArticleNumber=000035829 and it is a problem, because we already had 4.51 .NET on the system and tried to reinstall it think.

    I went down the .NET 4.5 system, and of course link works again.

  • Windows cannot communicate with the device he resourse (primary DNS server).

    Original title: primary dns.

    Help, please

    Windows cannot communicate with the device he resourse (primary DNS server)

    Please help me solve this problem

    If you see a 'FON' signal wifi on your PC and you have signed up to "FON", you should be able to connect to it.

    If you look on your BT router (or router you pay BT for the primary connection) on its homepage it should show something like "State of the Wifi BT. If it is active, you should be a member "FON", if it is not active then you need to register and agree.

    BT has their own support forum if you have not already tried it - https://community.bt.com/

    See the FAQ here - http://www.btfon.com/support to ensure that you are connected properly.

    in particular:

    How can I connect once I connect to the correct Wi - Fi network?

    Once you are connected to the correct wireless network, launch your browser. This should load the Fon login page. Select Fon among the three options on the login page, enter your e-mail address and password and sign in. Launch another browser and you are ready to access the Internet

  • Cannot communicate with the device or resource - primary DNS server

    I have problems with my laptop using windows 7.
    I was able to connect to the internet until the 19/08/12 to the evening.   After having been online earlier that evening and closed, I rebooted the computer and found my computer connected to the wireless network but had access to Internet 'No '.
    Network Diagnostics has revealed: "Windows cannot communicate with the device or resource (primary DNS server). I had a full signal strength and I introduced myself to be connected to the network, but there is "no internet access.
    I have several computers and have no difficulty in connection with any other device (computer, video streaming, phone), to the internet through the network, home.
    I tried and am not able to connect wireless or ethernet over any network cable (tried 3 others) but can connect to these networks using other computers, telephone, etc.
    I have not recently installed/uninstalled anything.  System Restore says the last restore as on 15/08/12 point.
    Thank you.

    Hey, I uninstalled McAfee and that solved the problem.  Thanks a lot for the suggestion and encouragement.  I'm back online.

    Thank you again... Success!

  • Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server)

    Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server), Internet Explorer browser does not.

    Hi Rachel,

    I understand that when you try to connect to the Internet, you get error "Windows cannot communicate with the device or resource (primary DNS server)", what other issues you are faced with Windows?

    • Using a cable or a wireless Internet connection?

    DNS (Domain Name System) translates the URL in IP (Internet Protocol) addresses (and vice versa). For example, if you type http://www.microsoft.com into the address bar in your web browser, your computer sends a request to a DNS server. The DNS server translates the URL to an IP address so that your computer can find the Microsoft web server.

    I suggest you to follow the methods in this article and check if it helps.
    http://support.Microsoft.com/kb/2779064/en-us

    Let us know if it helps.  If the problem persists, please answer, we will be happy to help you.

  • C4599, error-print wireless unable to "communicate" with the device?

    problem with the wireless C4599 printer

    sometimes wireless works, and sometimes it's not

    "solution center" shows that it is connected.

    When the work get status = "error - printing"

    "solution center" still shows as connected, but when trying to get information, such as ink level, get "the computer is unable to establish 2-way communications with the device.

    OK work when connect with usb.

    does not help to disable ZoneAlarm firewall.

    What are the good ' property settings, for example...

    ' 1. ' localization ', Ip etc.?

    2. "ports", including one for check or add?

    3 etc.

    could not find any help in the manual.

    Maybe there's another document that helps with that.

    any other suggestions for fixes?

    Thanks again for your help!
    AKM (XPproSP-3, 7 - IE, Office2003)

    I'm starting to suspect a problem with your firewall.  Is the firewall disabled Windows (do)?

    In addition, ZoneAlarm has some known issues with the HP printing software.  Learn how to set it up here.

    I would like to set a static IP address (or reserve, and IP address), but I don't think it's a source of your current problem.

  • Re: Satellite C650 - problem with the devices connected to USB ports

    Hello

    Can help someone, I have a C650 and everytime I try to connect to something to him via the USB ports, it is not "found" by the computer?

    The other night, I tried to get pictures on my phone but it wasn'; work and I put it down to a problem with the phone, but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.

    The laptop makes a beep sound as it would on an extraction device when you plug... I hope that makes sense. So I am now assuming that the problem is with my computer, is there something I can do to fix this?
    Thanks in advance

    Sorry should add - it's like nothing is plugged at all when it is, and it happens on two USB ports, not just one...

    Post edited by: leahhw123

    Hello

    What happens with plug n play like USB mouse device?
    You are able to use an external USB mouse correctly?

    > but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
    I guess this could be a problem with the software or drivers installed.

    I searched a bit and his city that he has a software is compatible with windows vista/2000/xp. Win 7 is not mentioned do not know if this could be a problem, but in your case, I recommend asking the support of this software product for some advice.

    In addition, you can try to install this software once more, check whether this USB problem appears again.

  • Palm TX - calendar office empty and now it seems that it syncs with the device.

    Hello Forum members, Palm

    I have Windows 7 and I synchronize my Palm TX for desktop 6.2.2 via bluetooth.  Two weeks ago, I loaded my calendar of office, and it was empty.  I have made several attempts to synchronize my device to the desktop computer in the hope to recover my datebook\calendar and it seems that the synchronization stops during the update of datebook\calendar.  I uninstalled and reinstalled the desktop software, I also imported the appointment file... but it is also empty.

    Any assistance will be greatly appreciated, thank you in advance :-)

    Lori

    There may be the database at the source of the problem. Click on the following link for the program called DbFixiT. This program has a trial version that you can download and install on your Palm OS device. The trial version will search the database and then to declare the corruption. You can then search records at the origin of the problem and fix them yourself or you can buy the program and do it automatically repair records.

    http://www.pimlicosoftware.com/dbfixit.htm

    To install the program, the value of all lines of "doing nothing" except quick installation or install if you use Palm desktop 6.2.

    After installing the program on your handheld, the scanner and scan also to BLOBs in the calendar.
    After you clean up the database on the handheld, set the conduit in hotsync for handheld overrides desktop and perform a hotsync.

    The best way to protect your data is to export the data in each category of Palm Desktop in a separate folder on your PC.

    Create a new folder on your PC somewhere that suits. Name it something like Palm Desktop data. Click on the link below and follow the instructions on this page for the export procedure.

    http://KB.hpwebos.com/wps/portal/KB2/common/article/28734_en.html
    Make sure you only select everything for the beach in the export window.

    With the data stored in the created folder, make a copy of this file and save it on a USB key, cd - rw or external hard drive.

    Whenever you change in Palm Desktop, export the data that has been changed in this file and save again to external media.

    With this process you can always import the data in Palm Desktop, whenever you have a problem with the data in Palm Desktop, or if your computer/hard drive/device crash.

    For reference purposes, click the following link to the support page for your device on the kb.hpwebos.com Web page.

    http://KB.hpwebos.com/wps/portal/KB/na/tungsten/TX/unlocked/home/page_en.html

    There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

  • I am installing a vivitar program and that is to say that it is incompatible with the device?

    The CD installation, says it is compatible with Windows 7, but the program tells me repeatedly that Hubpages has stopped working and it closes the program. On paper I seem to meet the qualities then why this error appears and how can I solve this problem? When I look at the detailed description which is where he says the devices are incompatible... Help please!

    See the developers website for compatibility with Windows 7 and if there are updates, corrections or difficulties that might ensure compatibility.

    Windows 7 Compatibility Center

    Check if your application software or hardware is on the list

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    Software:

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software

    You can also try to run the program in compatibility mode

    You can find more information on compatibility modes in the articles below:

    http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question

    The software is designed for an earlier version of Windows such as Windows XP? Most older programs don't work with Windows 7, in particular some programs for Windows XP, can you need to perhaps upgrade to Windows 7 Professional or ultimate edition if you run not an edition and download the Windows XP Mode free program which will allow you run old programs:

    Run in Windows XP Mode requires:

    (1) Windows 7 Professional, Ultimate or Enterprise (not supported in Home Premium).

    Windows XP Mode and Windows Virtual PC

    http://www.Microsoft.com/Windows/Virtual-PC/default.aspx

    Windows XP Mode now accessible to more than PC

    http://windowsteamblog.com/Windows/archive/b/Windows7/archive/2010/03/18/Windows-XP-mode-now-accessible-to-more-PCs.aspx

    Get started with Windows Virtual PC

    http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx

    http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

    Windows 7 - upgrade Express features:

    http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

Maybe you are looking for