With the help of 2 iMac... one as a monitor?

Hello. I have a 2011 27 inch Imac and a 2015 21 inch Imac. is there anyway I can use the 21 inch Imac as the main computer and have the 27 inches as a double with the 21-inch monitor? 21 inches is newer and more powerful that's all, and this would save buying me a new view for 21 inches.

Any help would be appreciated.

Yes it will work see-> use your iMac as a display with the target - Apple Support Display Mode

Tags: Mac

Similar Questions

  • WITH THE HELP OF SEPARATE OR ONE GROUP WHEN IN PRIMARY KEY CLAUSE

    I WANT A WAY TO EFFECTIVELY PERFORM AGGREGATE FUNCTIONS ON A PARTNER OF THE PARENT TABLE CHILD TABLE AND RETURN ALL THE COLUMNS IN THE PARENT TABLE AND CALCULATED FROM THE CHILD TABLE COLUMNS.

    THE PROBLEM IS THAT WHEN I USE GROUP BY ON ALL FIELDS IN THE PARENT, INCLUDING THE PARENT TABLE TABLE, I THINK THAT ORACLE TESTS ALL THE COLUMNS IN THE GROUP BY CLAUSE WHEN IT SHOULD GO HAS THE PRIMARY KEY MAKES ALL IMPLICITLY SEPARATE LINES.

    I CREATED TWO TEST TABLES AND RRAN SOME QUERIES TO TEST AT THE SAME TIME.

    HERE ARE THE TABLES:

    CREATE TABLE A_PARENT_TABLES
    (ACTIVATE THE NUMBER PT_PARENT_TABLE_ID (20.0) NOT NULL,)
    PT_GRP_FEILD1 NUMBER (20.0) NOT NULL ACTIVATE.
    PT_GRP_FEILD2 NUMBER (20.0) NOT NULL ACTIVATE.
    PT_GRP_FEILD3 NUMBER (20.0) NOT NULL ACTIVATE.
    PT_GRP_FEILD4 NUMBER (20.0) NOT NULL ACTIVATE.
    PT_GRP_FEILD5 NUMBER (20.0) NOT NULL ACTIVATE.
    PT_GRP_FEILD6 NUMBER (20.0) NOT NULL ACTIVATE.
    PT_GRP_FEILD7 NUMBER (20.0) NOT NULL ACTIVATE.
    PT_GRP_FEILD8 NUMBER (20.0) NOT NULL ACTIVATE.
    PT_GRP_FEILD9 NUMBER (20.0) NOT NULL ACTIVATE.
    ENABLE CONSTRAINT A_PARENT_TABLES_PK PRIMARY KEY (PT_PARENT_TABLE_ID)
    );

    CREATE TABLE A_CHILD_TABLES
    (ACTIVATE THE NUMBER CT_CHILD_TABLE_ID (20.0) NOT NULL,)
    CT_PARENT_TABLE NUMBER (20.0) NOT NULL ACTIVATE.
    CT_VALUE_TO_SUM NUMBER (20.0) NOT NULL ACTIVATE.
    ACTIVATE THE CONSTRAINT A_CHILD_TABLES_PK PRIMARY KEY (CT_CHILD_TABLE_ID)
    CONSTRAINT CT_PARENT_TABLE_FK FOREIGN KEY (CT_PARENT_TABLE)
    REFERENCES A_PARENT_TABLES (PT_PARENT_TABLE_ID) ON DELETE CASCADE ALLOW
    );


    I HAVE INSERTED THEN 20,000 RECORDS IN THE A_PARENT_TABLES TABLE AND 60,000 IN A_CHILD_TABLES (3 FOR EACH PARENT)
    I THEN RAN THE FOLLOWING QUERY:


    -ALL FIELDS GROUGPED
    SELECT
    PT_PARENT_TABLE_ID,
    PT_GRP_FEILD1,
    PT_GRP_FEILD2,
    PT_GRP_FEILD3,
    PT_GRP_FEILD4,
    PT_GRP_FEILD5,
    PT_GRP_FEILD6,
    PT_GRP_FEILD7,
    PT_GRP_FEILD8,
    PT_GRP_FEILD9,
    SUM (CT_VALUE_TO_SUM) AS SUMED_VALUES
    Of
    A_PARENT_TABLES,
    A_CHILD_TABLES
    WHERE
    PT_PARENT_TABLE_ID = CT_PARENT_TABLE;

    GROUP BY
    PT_PARENT_TABLE_ID,
    PT_GRP_FEILD1,
    PT_GRP_FEILD2,
    PT_GRP_FEILD3,
    PT_GRP_FEILD4,
    PT_GRP_FEILD5,
    PT_GRP_FEILD6,
    PT_GRP_FEILD7,
    PT_GRP_FEILD8,
    PT_GRP_FEILD9;


    At TOOK 2.42 seconds set IN ŒUVRE



    -ONLY GROUPED FIELDS
    SELECT
    PT_PARENT_TABLE_ID,
    SUM (CT_VALUE_TO_SUM) AS SUMED_VALUES
    Of
    A_PARENT_TABLES,
    A_CHILD_TABLES
    WHERE
    PT_PARENT_TABLE_ID = CT_PARENT_TABLE
    GROUP BY
    PT_PARENT_TABLE_ID;


    At TOOK 0.71 seconds set IN ŒUVRE


    WHY DOESN'T THE FIRST QUERY ARE REALIZING THAT HAVING PT_PARENT_TABLE_ID (PRIMARY KEY) IN THE GROUP BY CLAUSE MEANS THAT NO OTHER COLUMNS SHOULD BE CHECKED?

    HOW CAN I ACHIEVE THE EQUVILENT OF THE FIRST QUERY IN A WAY MORE EFFECTIVE?

    Hello

    As you can see on the plain explain command
    This full table scan done query1 on A_PARENT_TABLES
    query2 done index range scan on A_PARENT_TABLES

    This is one of the reasons why query2 runs faster than the application 1.

    Why complete analysis of table to query1?
    Its because you want in query1 to display other fields present in A_PARENT_TABLES and is not present in the primary index of this table, that is why he must go to the table for the data.

    Hope this helps.
    Concerning
    Anurag Tibrewal.

  • With the help of Qosmio G30-201 as a monitor for the connection of the Playstation

    Hello

    I bought a laptop G30-201 that has a video input.
    I am able to use the laptop as a monitor screen to run my Playstation 2 through it?
    Please can you advise how to do this.

    Hello

    I have no playstation, but I was able to watch movies VHS on Qosmio LCD to display when VHS-recorder is connected. Because of that, I think with playstation that there should not be no problem.

    Try to do this:

    Connect your playstation with antenna port
    Start Qosmioplayer and playstation too
    Use option scanning channels

    I'm sure Qosmioplayer find a channel where you can see the photo of the playstation.

    Please let me know if this work.

  • I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

    I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

    Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

    Turn off the new modem for at least 30 minutes. More is better.

    Perform a hard reset on the AirPort Extreme, then it turned off.

    Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

    After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

    Then, turn on the airport and let it run a few minutes

    Set up AirPort Extreme again

    Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

  • With the help of PSE v14 when PSE v10 is still in my iMac with iPhoto and when I click on a photo and click on change, he wants to keep opening PSE v10.  I just installed a temporary version of PSE v14 and would really like to use to see want I can do.

    With the help of PSE v14 when PSE v10 is still in my iMac with iPhoto and when I click on a photo and click on change, he wants to keep opening PSE v10.  I just installed a temporary version of PSE v14 and would really like to use to see want I can do.

    You open iPhoto or organizer? If the latter; Check your configuration. During your installation, make sure you select the application, and not an alias (shortcut). Go to this link.

    PSE14 as an external editor

  • I have customized a widget and want to reuse on another page. How save, copy or reproduce them? With the help of the iMac and Muse 2015

    I have customized a widget and want to reuse on another page. How save, copy or reproduce them? With the help of the iMac and Muse 2015

    You can just copy/paste the enchilada itself on another page, pretty easy!

    If you want to reuse more often, you can open the library or libraries CC , to store and later hanging out once again. Note: for the creation of an article in the 'old' library, you must select the element on the page and click on the new icon in the " library " window To create an element of CC libraries , you can simply drag something in and out of the window libraries CC .

  • With the help of several types of video files into one film will prevent the publication?

    I am using Movie Maker on Vista.  I have mpeg, avi and wmv files.  The Movie Maker plays very well in project mode, but will not be published.  Multiple file extensions would be the source of trouble?

    If so, is there a quick fix?

    Hi d1bon,
     
    1. what exactly happens when you try to publish a project?
    2. do you get an error message?
     
    With the help of several file extensions should not be a concern.

    Disable video filters and check the result.
    1. click on tools and then click Options.
    2. click on the Compatibility tab.
    3. to turn off a filter, clear the check box next to the name of the video filter.

    You also uninstall the Codecs and check the result: Uninstall

    Please provide us with more details on the issue, so that we can better help you.
     
    Check publish a movie in Windows Movie Maker
    Check, solving problems with publishing a movie to your computer 
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.

  • Insert the record of one table to another with the help of the cursor

    Help, please!

    the tables are - 1. countries (country_id pk, country_name, region_id)
    2A (country_id, country_name, region_id)
    table data are
    1 to 1
    2 b 2
    3 C 3
    NULL d 4
    5 e 5
    6 f 6
    7 g 7
    -----------------------
    Insert the record in the table a country table with the help of the cursor, insert all the non-null records.
    This procedure does not correct result
    -----------------------

    create or replace
    Amit procedure as
    cursor c1 is select * from a;
    RW a % rowtype;
    Start
    Open c1;
    Fetch c1 into rw.
    While (C1% found)
    loop
    insert into countries values (rw.country_id, rw.country_name, rw.region_id);
    commit;
    Fetch c1 into rw.
    If rw.country_id is null then
    Fetch c1 into rw.
    end if;
    end loop;
    Close c1;
    exception
    while others then
    dbms_output.put_line ('exception = name ' |) RW.country_name);
    end;

    You don't need cursor at all;

    create or replace procedure amit as
    
    begin
      insert into countries (Country_ID, Country_Name, Region_ID)
      (select a.Country_ID
             ,a.Country_Name
             ,a.Region_ID
       from a
      );
    
      dbms_output.put_line('Rows inserted : ' || sql%rowcount);
    
      commit;
    
    end;
    /
    
  • ow change titles & dates of lots of pictures (like in iPhoto?) With the help of Mac 'Pages' on, 2008 aluminium MacBook running OSX El Capitan 10.11.4

    How to change titles & dates of lots of pictures (like in iPhoto?) With the help of Mac 'Pages' on, 2008 aluminium MacBook running OSX El Capitan 10.11.4

    With the help of Mac 'Pages '.

    A typing mistake?

    If it is and you mean Photos Date of Mac are modified by selecting the photos using the Image menu == > adjust the time and date of order and changes made to the metadata such as keywords, location, etc. are made by selecting the photos and find the info and registering metadata in the Info window

    These are detailed in the help topics of pictures - a good place to look for help on the Photos

    View and add information about the photos

    You can view and add information about your photos. For example, you can see the date and time a photo was taken, the information about the camera that took the photo and badges that indicate the status of the photo. You can assign titles and captions to photos, add or change the location of the photos and change the date and time for them information. You can select multiple photos in an instant and add or change information about them all at once.

    Open pictures for me

    View and add information about the photos

    To view or change information for the photos, you select one or more photos, and then open the information window.

    • Open the Info window: Double-click a photo to view it, and then click the Info button in the toolbar or press on command I.
    • Add or change information: Change the following.
      • Title: Enter a name in the title field.
      • Description: In the Description field, type a caption.
      • Favorite: Click the Favorites button to mark the photo as a favorite. Click the button again to deselect.
      • Keywords: Enter the keywords in the keywords field. When you type, Photos suggest keywords that you have used before. Press enter when you have finished a keyword. To remove a keyword, select it and press DELETE.
      • Faces: Click on and type a name to identify a face. Click on several times, and then drag the identifier of the face different faces to identify many faces in a photo.
      • Location: Enter a location in the location field. When you type, Photos suggest places you can choose. To change a location, you can search a different location or change the location by dragging a PIN on the map. To remove location information, delete it or choose Image > location, then choose Remove location or back to the original location. You cannot assign a location if your computer is not connected to the Internet.

    Show titles, other metadata and badges

    Change the date and time of photo

    You can change the date and time associated with a picture. You can do this if you are traveling to a location in another time zone, and your camera affect your dates photos and periods that are correct for your House, but not the place you visited.

    1. Select the photos you want to edit.
    2. Choose Image > adjust Date and time.
    3. Enter the date and time you want in the modified field.
    4. Click a time zone on the map, if necessary.
    5. Click on adjust.
  • Help? With the help of file system Ext3 on key USB on Linux RT target

    We have been affected by problems with the SD cards and USB drives formatted in FAT32 on some devices, according to Linus RT of long-term monitoring (mainly the cRIO-9035). It seems that readers are vulnerable to fluctuations in current and unexpected reboots (which are inevitable on these sites). Write aborted operations make the damaged discs, thus sabotaging logging after reboot.

    We have identified two solutions; implement both gives the best redundancy:

    (1) installation of UPS (uninterrupted power supply for emergency supplies/batteries) - done

    (2) using the file system apparently more robust 'ext3', which is available on the target RT Linux (FAT32, ext2 and ext3) - don't have not so far:

    ->, I was not able to properly format a USB stick for ext3. I use the MiniTools Partition Manager and don't get any errors when create and format partitions. But they appear as 'read only' when it is inserted into the chassis of the RT. All attempts to access it, other than to observe the empty folder sdxx in ' / media "is returning errors.

    Someone had a bit of luck with the help of ext3 disks formatted as data drives on the objectives of the RT Linux? It is worthwhile to solve my problems or should I use FAT32 and the observed risk?

    I do not consider this but a temporary solution:

    I ran into issues when you use MiniTools Partition Wizard to partition and format my thumb on Win10 records. An unidentified change makes the inaccessible disks and freeze the browsing of file on the PC when I try to delete the partition. It was quite annoying!

    I decided to try another partition tool and went for the EaseUs Partition Master (free version for the moment). I formatted successfully one of the troublesome discs with it (to add some uncertainty to the solution, I used another brand sp * banking, new PC to do). The reader now mounted in read-write and allows the startup application create the I want to store files in folders.

    I'm very curious to know the difference between the tools of both partitions and their formatting...

  • With the help of semaphore with a Global Variable - correct use?

    Hi all

    I looked in the use of global variables and in my case, it seemed with the help of a semaphore is the appropriate solution.

    In my case, I use a global variable to store the State of the system. Asynchronous two with screw environment (same VI) will follow two COM ports to see if they get a ' login:' command prompt. If the COM port is associated with Alpha, Charlie, or Echo, it increments by 1, and if it is associated with the Bravo, Delta, or Foxtrot, is incremented by 2 GV. If the GV is 3, the rest of the code will run. In this case, it must be a port COM A, C or E; the other should be B, D or F.

    A VI parent is called inside a loop. He works for the first loop. He never adds up to 3 on the second loop, however. I can't understand why. Please let me know if my code is a poor use of semaphores, or if there is debugging I can try.

    I'm still relatively new to LV, so I'm sorry if my screws are difficult to read. I created this in LV2011.

    Thanks for any help!

    CelerityEDS wrote:

    The output of my time looping (wait GV = 3) goes to the structure of the case on the bottom right (clear SGS, PasswordEntry, etc.), so the GV get indeed consulted by the upper case structure right.

    ??

    Your right upper case structure does not run until your time ends in a loop.  The while loop does not stop until the total is equal to 3.  Where can increment you the world besides structures case you cannot yet?

    Have you tried in your point culminating execution of the VI in order to see how they are actually running?

    Another problem that I see.  Assuming that your first while the loop is going to end.  In the structures of your case, you lock the semaphore.  But you can never unlock the semaphore unless you have the right combination of conditions that allow you to get to the case that unlocks the semaphore.  The conditions are based on data that are read before the start of the case of structure, which means that data will not be read and changed until it all ends.  You have the timeout of your lock semaphore connected on one of the cases, but your semaphore lock can never timeout because you do not have a value on his entry time-out.  I think you have a situation where you can lock a semaphore, then arrive at a situation where you can not unlock, then wind locking up of your cold code.

    I don't really think that you need a semaphore at all.  I think you can protect reading and writing functional your overall using a global variable, i.e. the motor action.  Overall, I think you need to rethink the architecture of your code.

  • With the help of JavaScript condition in the dynamic action of JQuery selector

    Hi guys,.

    I have a Setup master detail on a page.

    The detail section, I have a tabular presentation.  One of the fields is a selection list.  The first record in the select contains the value * not * that has a value of primary key for the 1.  I have a distinct region with a simple text field where the user can insert a value into the table if the value does not exist.

    I want than the region of text element to only appear if the value * not listed * is selected.

    I managed to make it work when the value is selected with the help of dynamic action with a bit of JQuery and JavaScript by setting the ID on the selection list to 'create' and have the following in JavaScript $(this.triggeringElement) .val ()! = 1 in the JavaScript for dynamic action condition shows it or hides the region of 'create' and that works well.

    However, if the secondary table is empty before the detail records were created (nothing selected in triggering jQuery Selector) the region of create is displayed when I don't want it.

    I guess I need some sort of NVL in JavaScript condition?

    I use APEX v4.2.

    Any advice would be appreciated.

    Chris

    Cashy wrote:

    I have a Setup master detail on a page.

    The detail section, I have a tabular presentation.  One of the fields is a selection list.  The first record in the select contains the value * not * that has a value of primary key for the 1.  I have a distinct region with a simple text field where the user can insert a value into the table if the value does not exist.

    I want than the region of text element to only appear if the value * not listed * is selected.

    I managed to make it work when the value is selected with the help of dynamic action with a bit of JQuery and JavaScript by setting the ID on the selection list to 'create' and have the following in JavaScript $(this.triggeringElement) .val ()! = 1 in the JavaScript for dynamic action condition shows it or hides the region of 'create' and that works well.

    However, if the secondary table is empty before the detail records were created (nothing selected in triggering jQuery Selector) the region of create is displayed when I don't want it.

    I guess I need some sort of NVL in JavaScript condition?

    I use APEX v4.2.

    Simple solution is to hide the region containing the element of text by default, using the style = "" view: no ' in the property of the attributes of the area in the region. " It will be always hidden when the page initially, but its visibility will be controlled by the DA subsequently.

  • Hello, I accidentally opened an old file Ircat... and now can't figure out how to return to my only current.  With the help of Mac Yosemite, Lightroom CC

    Hello, I accidentally opened an old file Ircat... and now can't figure out how to return to my only current.  With the help of Mac Yosemite, Lightroom CC

    Thank you!

    File-> open recent. Lists the catalogs you have opened and will allow you to choose one of the previous catalogues.

  • dml execution 2 statements at a time with the help of execute immediate

    I would like to run 2 DML statements at a time with the help of execute immediate usefulness,.

    ex:

    update employee set ename = 'Chantal' where eno = 123;
    Update dept set dname = 'IT' where dno = 345;

    I want the two statement to execute at a time, but I don't want to use any loop as well.

    Thanks in advance

    You can use:

    execute immediate 'begin update employee set ename='jagadeesh' where eno=123; update dept set dname='IT' where dno=345; end;';
    

    Although updates will always run one after the other.

    If you want the simultaneous treatment, then you need to use DBMS_JOB and DBMS_SCHEDULER to plan both work to run to run each of the statements independently.

  • With the help of measures advances/variables to display a summary list

    I use Captivate 5 to develop a tool that guides people through an application process and indicates the probability of this request is successful or not.

    What I would like is to have a legend at the end that displays a summary list of the reasons for which the application could be delayed or declined.

    For example, one of the questions may be: have you ever traveled abroad?  The user then selects Yes or no.

    On the last slide, he needs to post a topic (for example, your application is likely to be delayed for the following reasons) and any other reasons that are taken into account that the user is working on throughout the process.

    At present, there are 13 questions, so 13 reasons possible.

    Is it possible to use variables and advanced actions to get these to display in a list?

    I assigned to a variable for each response and action that adds 1 to the variable, if the answer is chosen.  I thought then to add another variable, called reasons which would then post the grounds with the help of a tip action (eg. If variable = 1 to allocate patterns with a variable containing the text of the summary).

    It does not, because it will only display the last answer that triggered an action, not a list.

    I've also thought about using actions to show/hide captions, but I think that will make gaps appear in the list if some of the reasons do not appear.

    Someone at - it other suggestions that might work?

    Thanks in advance for any help you can give me.

    The possibility to display all variables in a text caption and to see if they had a value of 1, didn't work...

    Now, I think the only option is to display all the legends, an action to show or hide the options that don't apply, based on the responses throughout the questionnaire.  Variables and advanced actions do not seem to be able to be used in the way that I was hoping - in other words, the variables are displayed only if certain options are selected (as a summary on a web form page).

Maybe you are looking for

  • 50g - numbers associated with menus soft

    I recently discovered that you enter, for example, 1: 3 MENU will result in changing the menus soft to the MTH ([LS, SYMB]) menu.  Is there a list that shows what the figures are for access every menu? I hope that I do not forget a solution already o

  • Presario CQ57: 63866252

    Locked BIOS 3 attempts system 63866252 returns disabled No codes forum I found work. Help, please. Thank you!

  • Qosmio F30-117 freezes

    Hello! I bought a Qosmio F30-117 earlier and it started to freeze. I get to the computer desk-very good, then it completely freezes and I have to remove the power cord and the battery to restart, then it usually loads fine. Anyone else had this probl

  • USB easy transfer cable question

    bought this after the visit of this forum, but I'm still lost, not really computer savy with regard to this kind of procedure. I have an old computer that I want to transfer photos/media on my new computer, the Member of the forum said it would be th

  • convert wps to doc files

    How to convert wps files from a computer to 32-bit Vista Edition home premium for doc files which opens onto a computer with Windows 7?