With the help of an operating system older Compaq is professional Windows. Internet Explorer connected very slowly. .

Similar Questions

• Windows XP mediacenter edition starts with the message "Not found operating system"

  pls help..., my Acer laptop aspire 5594wxmi, windows xp Media Center Edition version 2002, service pack 3. can't run recovery... I've seen all folder and file missing in MY DOCUMENTS..., I try to make formatting back up the entire system... "Damage' does not work?, the problem is OPERATING SYSTEM NOT FOUND, even I try" backup cd "dics still return a same problem... oh my God, I m not fight... to my friend, here just ask for HELP..." Thank you.

  Hi garyquek,

  ·         Remember to make changes?

  ·         What happens when you try to use the recovery?

  You can check if this article helps.

  "Operating system not found" or the "Missing operating system" error message when you start your Windows XP-based computer

• c: overwritten with the new xp pro operating system. Need to retrieve the d: partition.

  My brother installed Windows XP Pro installation disc from my other computer on my desktop HP Pavilion 754n without my permission and I can not access the system restore to perform a non-destructive recovery with the recovery d: partition.  How can I manually start the recovery partition to restore original factory programs?

  Thanks CheryG! I did a non-destructive control cover just to test and it worked.  I have had a few glitches and discovered that I had forgotten to delete the files from my brother of the recovery d: partition.  I have since removed them and am moving forward with the full destructive recovery.  You are a life saver.  Thanks for the help and have a wonderful Thanksgiving holiday.

• With the help of Remote Shell of Linux to run on Windows Server 2008R2 .bat files

  I use rsh to my Linux server to run Windows applications on a Windows 2003 server using .bat files remotely.  For example, from Linux:

  rsh win2008s.enterpisedomain.com D:\\appdev\\atm_ally\\bgr_atm_ally_standard_pip.bat ${PINSTANCE} {IVSWEBBROWSERUSER} ${PPASS} ${DINSTANCE} ${DUSER} ${DPASS}

  I want to be able to rsh to a Windows server 2008R2.  I installed SUA and the SDK and utilities.  I also installed the patch from this link:

  https://support.Microsoft.com/en-us/KB/2360829/en-us

  When I try to run the same command on Win2008R2, I get the following:

  RSH: D:appdevatm_allybgr_atm_ally_standard_pip.bat: not found

  I also tried to change the content of the file bat in the Unix syntax, following the signs to help SUA.  The following text runs if I use rlogin and run interactively, but fails to run using remote shell (rsh):

  #! / bin/ksh
  export PATH=/dev/fs/C/instantclient_12_1:/dev/fs/C/Windows/SUA/bin:/dev/fs/C/Windows/System32:/dev/fs/C/Windows:/dev/fs/C/Windows/System32/wbem:/dev/fs/C/Windows/System32/WindowsPowerShell/v1.0:/dev/fs/C/Program Files/FME2011:/dev/fs/C/Windows/SUA/common:/dev/fs/C/Windows/SUA/usr/lib
  export PATH_WINDOWS=/dev/fs/C/Windows/System32/.com,.exe,.ksh,.bat,.cmd,:/dev/fs/C/Windows/SUA/common/.com,.exe,.ksh,.bat,.cmd
  ' / dev/fs/program/C Files/FME2011/fme.exe ' E:\\appdev\\standard\\standard_pip.fme--BndTab BOUNDARY2015. BND_01_DMA - BndInst DWSTG - BndU atm_ally - edwat56c1 - BndIDCol GEO_ID - BndDType PBED ' VARCHAR2 (25) ' PntTab - V_ATM_JAN15_GEOCODE - PntInst DWSTG - PntU ATM_ALLY - edwat56c1 - PntID ID - PntIDType PntP ' VARCHAR2 (8) ' - PntLat N_LAT - PntLng N_LON - PntLatType "NUMBER (10.6)"-PntLngType "NUMBER (11.6) ' DestTab - ATM_JAN15_DMA - DestInst DWSTG - ATM_ALLY - edwat56c1 - NearDist DestP DestU 0 - Logfile 'test2.log '.

  using rsh:

  rsh win2008s.enterpisedomain.com /dev/fs/E/appdev/atm_ally/test_pip_win.ksh

  remote shell fails with the error:

  ' / dev/fs/C/Program Files/FME2011/fme.exe "no such device

  Anyone have any ideas?

  Your query is better here

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

• Problem with the installation of an operating system

  Hi, Gays

  I have hp dv6 7000 with 1 TB drive HARD Toshiba with 32 GB SSD as cache accererator. I tried to install windows 8, but I have trouble finding the drive in to choose in which partition should be installed. Have you had anyone a problem like that?

  I think I need a driver for it but I couldn't find anywhere, I samo conversations with people from hp Support, but without any result.

  Can someone help me?

  You must > driver Intel SATA. Extract the files to a folder using 7Zip or another utility. Copy the "Drivers" folder on a USB key. Boot with your dvd of Windows 8 and when you get to the stage where it must choose where you want to install Plug the USB (preferably in a USB 2.0 port, but I believe that Windows 8 has native support for USB 3.0 too) and load the driver from the folder.

• With the help of Western WD50EZRX Digitial 5 to drive on Windows 7 Professional 64 bit

  Hello

  I bought this new Western Digital Green 5 to drive as a device of storage, but somehow, Windows 7 Professional 64 bit on both my Dell Optiplex 990 (with Bios A19) and Dell Studio XPS 8100 (with Bios A05) can't see the ability beyond 561 GB (instead of 5 TB). I tried to just put it in the USB port, docking station and internally via ATA cable connection, but there is no change.

  On my Dell Optiplex 990 I even tried to change the main drive of 1 G (it's a laboratory machine in order to clean and reinstall OS) use of AHCI in the options of SATA drive in the Bios that I read, that it may be able to see the full capacity. Yet the problems I'm running into now seem to be

  1 BIOS can't even see the 5 TB drive in the Dell Optiplex 990.

  2 Windows cannot install once even in the main drive of 1 GB that I have spend fast storage by default to use AHCI.

  Please please advise on how I can use this 5 TB internal SATA drive or external drive USB in Windows 7. Thank you.

  Hi Waynewcleung,

  Please try to update the Intel RST. That is usually the case.

• With the help of & quot; target & quot; to open a new window

  I have a question about the opening of a new window. There are a few times when I want to open a new browser window and in the past, I used equal to _blank target. This is not allowed in XHTML strict version. Is it because she has been replaced by something else (and if so, what) or because it is considered bad practice in all situations?

  The latter. But you can still work around it by using a bit of javascript
  * and * validate your pages, too. See Thierry tutorial how to
  This here-

  http://www.TJKDesign.com/articles/popup_window_with_no_extra_markup.asp

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "suetertarr" wrote in message
  News:ego1it$L9H$1@forums. Macromedia.com...
  > I have a question about the opening of a new window. Some time ago when I
  > want to open a new window of the browser and in the past I've used target equal
  > to
  > _blank. This is not allowed in XHTML strict version. Is it
  > because it
  > has been replaced by something else (and if so, what) or because there
  > considered bad practice in all situations?
  >

• Why do I get the message that my operating system is not supported?

  My computer is running Windows 7-64 bit. I have the latest softwear on my iPhone and my iPad. I installed edge inspect on these devices and have the advantage of Google Chrome to inspect the installed extension. I have enter my password strengthened for both devices in the Chrome extension. Why do I get the message that my operating system is not yet supported?

  It's VERY interesting... even if I got this weird message, once I connected my iPhone and my iPad to the extension of Google, it worked! See all what I automatically in Google Chrome displays in the application of edge inspect on small devices. It's clean! The only problem I see is that Adobe needs to replace the error message with information about the use of the application.

• Thunderbird will only connect if stop then reopened. (With the help of Mac 10.9.4)

  With the help of Mac 10.9.4
  If I open Thunderbird, I can connect to my e-mail address and download the messages. If I select "Get Mail" once again, Thunderbird crashes and fails to connect to my emails. If I then close Thunderbird and re-open it, I'm able to immediately connect to my mail.

  It seems to have sorted itself after a few days. (Fingers crossed). Until today it worked properly. Will keep an eye on things for the next week and the report does so again.

• Help? With the help of file system Ext3 on key USB on Linux RT target

  We have been affected by problems with the SD cards and USB drives formatted in FAT32 on some devices, according to Linus RT of long-term monitoring (mainly the cRIO-9035). It seems that readers are vulnerable to fluctuations in current and unexpected reboots (which are inevitable on these sites). Write aborted operations make the damaged discs, thus sabotaging logging after reboot.

  We have identified two solutions; implement both gives the best redundancy:

  (1) installation of UPS (uninterrupted power supply for emergency supplies/batteries) - done

  (2) using the file system apparently more robust 'ext3', which is available on the target RT Linux (FAT32, ext2 and ext3) - don't have not so far:

  ->, I was not able to properly format a USB stick for ext3. I use the MiniTools Partition Manager and don't get any errors when create and format partitions. But they appear as 'read only' when it is inserted into the chassis of the RT. All attempts to access it, other than to observe the empty folder sdxx in ' / media "is returning errors.

  Someone had a bit of luck with the help of ext3 disks formatted as data drives on the objectives of the RT Linux? It is worthwhile to solve my problems or should I use FAT32 and the observed risk?

  I do not consider this but a temporary solution:

  I ran into issues when you use MiniTools Partition Wizard to partition and format my thumb on Win10 records. An unidentified change makes the inaccessible disks and freeze the browsing of file on the PC when I try to delete the partition. It was quite annoying!

  I decided to try another partition tool and went for the EaseUs Partition Master (free version for the moment). I formatted successfully one of the troublesome discs with it (to add some uncertainty to the solution, I used another brand sp * banking, new PC to do). The reader now mounted in read-write and allows the startup application create the I want to store files in folders.

  I'm very curious to know the difference between the tools of both partitions and their formatting...

• With the help of windows Explorer XP does use CPU to go to 100% and the blocking of the system forever

  With the help of windows Explorer XP does use CPU to go to 100% and the blocking of the system, forever, until closing by force.  What can I do?

  It is very difficult to manage my files.

  I suggest you download Process Explorer. This freeware utility performs a similar function to the Windows Task Manager, but it goes much further.

  For more information about Process Explorer, see here:

  http://www.Microsoft.com/technet/sysinternals/SystemInformation/ProcessExplorer.mspx

  Explorer.exe is used by a number of applications. The posting process and see which element below uses explorer.exe.

• After I open a document using Adobe reader DC and want to save it with the help of Save as when I try to open this operation all I get is an empty windo saying save as. This problem just started, note I'm on Windows 7 Prof

  After I open a document using Adobe reader DC and want to save it with the help of Save as when I try to open this operation all I get is an empty windo saying save as. This problem just started, note I'm on Windows 7 Prof

  Hi sgodwin2468,

  Make sure that Acrobat Reader DC is updated Release Notes | Adobe Acrobat, Reader.

  If the problem persists, try the solution below.

  The default "save under" Acrobat/Reader DC dialog box is different from the dialogue box you had in earlier versions of Acrobat/Reader, it also allows you to record in the clouds and previous locations that you saved the files. It is possible that when Acrobat/Reader tries to connect to the 'cloud', it runs into problems. You can try to disable this feature to see if this brings your backup in the back of the box: open Acrobat Preferences, then go to the "General" category and uncheck "show the online storage when you save files:

  

  Kind regards

  Nicos

• Hello. I'm having trouble installing my Photoshop CS3 software. I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system

  Hello.

  I'm having trouble installing my Photoshop CS3 software.

  I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system is "Microsoft Windows 7 Home premium 2007 - with updates added.

  The version of photoshop that I have is 'Adobe Photoshop CS3, 2007. I installed Photoshop CS3 which seemed to install properly. I activated the dics and inserted the serial number. Activation complete. I had a problem with the registration with the following message through "a problem has been experienced so he was trying to send information on the internet".  I had a problem with look at a. CR2 file but I got a converter of Microsoft 'CameraCode '. I can use Photoshop software. I can't use a software link with Photoshop CS3 I was using before. It's "NIK software - Silver Efex Pro". This means that on the section "filter Photoshow. Can I use the software, but it does not save the changes I made. When I turn off the computer Photoshop CS3 is deleted from my computer. I got LIGHTROOM but software that works very well.

  The summaries. I can load Photoshop and use and save the changes, but when I turn off my computer the software is removed from the hard drive. But I can't get the link software - Nik software - Silver Efex Pro. Please can you advise me what I should do to get my software working properly again.

  Thank you.

  Keith Fernandez

  Once the software is installed, it will not be removed under normal circumstances.

  I do not know if your computer is still infected and it is removed or the problem is that you can't 'see' photoshop' but it is always installed.

  to verify this, check the installation directory and check its size on your hard drive.

• Hello. I'm having trouble installing my Photoshop CS2 software. I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system

  Hello.

  I'm having trouble installing my Photoshop CS2 software.

  I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system is "Microsoft Windows 7 Home premium 2007 - with updates added.

  The version of photoshop that I have is 'Adobe Photoshop CS3, 2007. I installed Photoshop CS3 which seemed to install properly. I activated the dics and inserted the serial number. Activation complete. I had a problem with the registration with the following message through "a problem has been experienced so he was trying to send information on the internet".  I had a problem with look at a. CR2 file but I got a converter of Microsoft 'CameraCode '. I can use Photoshop software. I can't use a software link with Photoshop CS3 I was using before. It's "NIK software - Silver Efex Pro". This means that on the section "filter Photoshow. Can I use the software, but it does not save the changes I made. When I turn off the computer Photoshop CS3 is deleted from my computer. I got LIGHTROOM but software that works very well.

  The summaries. I can load Photoshop and use and save the changes, but when I turn off my computer the software is removed from the hard drive. But I can't get the link software - Nik software - Silver Efex Pro. Please can you advise me what I should do to get my software working properly again.

  Thank you.

  Keith Fernandez

  Hi Keith,

  You won't be able to re - install using the discs and the number of series that you used initially, but we have a solution.

  The activation for more server CS2 is no longer in service. For this reason, we did a version of these titles of software available that doesn't require activation. This is for users who already buy the software.  For more details and specific links for the software, please see the following link:

  Activation server stops for Creative Suite 2 and Acrobat 7 product Macromedia

  Instead of your old serial number, use the one shown next to the download link: download Acrobat 7 and CS2 products

  Guinot

• Upgrade to LR5.7 and PS Elements 13.  With the help of an SSD that is more complete! Can I remove older versions of these programs without affecting the functionality of the new programs?

  Upgrade to LR5.7 and PS Elements 13.  With the help of a Solid State Drive, which is more complete! Can I remove older versions of these programs without affecting the functionality of the new programs?

  Yes, there is no need to keep older versions of the software on the SSD (or your computer).

  In addition, you mentioned but if the photos are on the SSD, you must move them off the SSD for a typical hard drive, by following these instructions: Adobe Lightroom - find folders and files moved or missing