With the help of MAX to configure digital input levels on a USB-6009

Similar Questions

• With the help of Max for alphanumeric values

  Currently I have a column varchar2 with the following data
  

  NPT_Code
  NPT00001
  NPT00112
  NPT03019A
  NPT00419

  Try to find a way to remove all the letters and get the next highest value increase.
  
  Numbers are always set to 5. Letters from there always 3 to the left. and sometimes, there is a letter to the right.
  
  I was going to mak a sequence and manually to the search for the greatest number in this column and just start from there, but I was wondering if anyone else knows another solution that uses max or something simliar.
  

  Select Max(NPT_Code) + 1 into l_NPT_CODE FROM TABLE
  
  UPDATE TABLE
  SET NPT_CODE = L_NPT_CODE
  WHERE ID = XXXX;

  Hello

  Here's one way:

  SELECT     TO_NUMBER ( REGEXP_SUBSTR ( string_column
                            , '[[:digit:]]+'
                        )
              )     AS number_value
  FROM    table_x
  ;
  

  number_value will be the number 3019 if string column is one of the following strings:
  NPT03019A
  NPT03019
  T03019
  03019NPT
  NPT3019A
  NPT0000003019A
  03019
  3019

  You can then use number_value functions such a MAX.

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
  Explain, using specific examples, how you get these results from these data.
  Always tell what version of Oracle you are using.
  See the FAQ forum {message identifier: = 9360002}

• With the help of MAX vs Teststand for switching

  Can someone explain what is happening here?

  I went to MAX and gave all my or alias switches (MUX).  This is the tab of channels/exclusions.  According to the diagrams tab is a road named column groups. I can give my Relay connection (as close to relay 2) alias here... like 'Close Relay 2 '.  If I click on relay 2 on the diagram, it shows a link between ch2 and com.  Fine.   Now when I go in Teststand > tab properties > switch > activate the change... I have the 'operation' 'Connect'  Is - this redundant?  I already connected when I called him.  If its Teststand because does not know what I want, when I call this particular alias he "cut" when I select disconnect from the drop down?

  You would say I leave ALL my relay open in MAX and just 'Connect' 'disconnect' in Teststand?

  Can you suggest what should be the other options though:

  I want to connect 1 or several relay for this sequence, do tests, then disconect the relays?  -What connection Liftetime?  So 'Step '?

  What is multimode and when and how to use it?

  Included some screenshots

  Thank you!

  Clint

  Hey Clint,.

  NEITHER Switch Executive exists in MAX and TestStand (and LabVIEW, etc.).  You can program individual routes to TestStand, or you can beforehand create complex route groups to the MAX, and then call the road/route groups TestStand.  Suppose for example that you want to connect A to B, C, D, E and F, you can create a great course called 'channels' band in MAX, then add explicit connections to this group of ranges (from A to B, C, D, E and F).  You simply connect 'great channels' now in TestStand and NI Switch Executive will do the rest.

  While you can connect channels in MAX, the intention is that you create route groups in MAX and then use these groups of road to the test (if for no other reason than TestStand is automated so that MAX is not).  At the end of the day, you can use the SW but you wish to, but we intend to the run-time execution to automate in teststand.  Think that MAX is the debug/configuration environment.

  Connection Lifetime is how long the relays must stay in touch.  For example, inflicting on life 'Step' means that, after this step TestStand is completed, the relay will be disconnected.

  Desktop mode is the concept that a relay can be connected more than once in the software.  Until the connection number is 0, the relay is open.  If the number of relays is greater than 0, then the relay is closed.  For example, suppose that you have two different tests that can run simultaneously, and they share the same relay.  Specifically, 1 tuberculin relay A and B, while the tuberculin 2 relay B and C.  If you are able to run both events at the same time (function of your DUT), then when you connect test 1 and 2 at the same time, relay A and C will be all both have a connection of 1 account (they were connected once), but the relay B will be 2 connections.  Thus, when testing 2 finishes and disconnects its associated relay, test 1 could still be running; Since the relay B will have a connection of 1 account after test 2 'disconnects' relay B, relay B will always be closed and 1 test will not be interrupted.  The concept takes a minute to wrap your head around, but finally it is quite powerful.

  OR Switch Executive is a very powerful program.  Once you've played a little with it for a bit, it is intuitively easy, but there is a curve of rampup higher compared to our other software program switch (OR-DAQmx, OR-Switch, etc.).  OR Switch Executive is particularly well suited for TestStand.

  Let us know if you have any other questions or if my answers are not clear.  Have a great day!

• With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  Opening was a pro the Pro amateur-oriented or serious app, usually shooting Raw, probably on a digital SLR.

  If that's you then pictures will miss a lot for you.

  If this isn't the case, then opening was probably overkill for your needs.

  If you like the pictures then this is the way to go.

• With the help of MS PRO Duo into the slot of the Satellite A200 MDMC

  I have a problem when inserting a Memory Stick PRO Duo SanDisk (512 MB) card with the help of Memory Stick Duo adapter in the card of my Satellite A200 - 1 M 8 (PSAE6) on Windows Vista Edition Home Premium.
  The device includes the insertion of the card (Windows notifies with the sound and the icon in the notification area).
  But then the computer window starts flashing and I can't open the disk of the card. OS always says insert the card in the card slot opening.

  I found the following statement in the manual of the laptop (Chapter 8 - optional devices):
  Memory Stick Duo/PRO Duo and Memory Stick adapter are not compatible with the multiple digital media card slot. :(

  But before that, I found this thread in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=101843𘷓
  The guy said that he has been successful and his position has been marked as the answer!

  Anyone know how to use MS PRO Duo in the locations of memory A-200?
  Thanks in advance.

  I put t believe that!
  First the user manual it says:
  -Memory Stick * PRO Duo *.
  -Memory Stick * Duo *.

  cards or adapters are not compatible with the multiple digital media card slot.
  In this case you cannot use the possibilities mentioned above!
  See the list given by Juan28 in the other thread.

  What you can do is to use the * Memory Stick * or * cards Memory Stick Pro *.
  I don't know but maybe the cards Memory Stick or Memory Stick Pro m is available for the Memory Stick Duo or Memory Stick Duo PRO working but to be honest I don t think so.

• With the help of an operating system older Compaq is professional Windows. Internet Explorer connected very slowly. .

  With the help of an operating system older Compaq is professional Windows. Internet Explorer connected very slowly. SO I've reworded in safe mode with network and IE has worked very well. I installed Mozilla Firefox and then restarted in normal mode. Then Internet explorer would not connect. How to diagnose in safe mode. What does safe mode or safe mode with network do to help diagnose? Can someone help me solve this problem? Any help would be appreciated thanks in advance.

  Hi, Raymond J,.

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What type of internet connection do you use?

  ·         What security software do you use?

  Follow these methods.

  Method 1: As the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2: Follow the steps in the article.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  How to reset the Protocol Internet (TCP/IP)

• To create the distribution with the help of disk manager.

  Dear all, I m facing problem with blue screen error. And my all partitions is corrupted and I like repartition with the help of disk manager. Win xp bootable cd its not working. so pls help thank you & best regards

  Hi zubair.

  · What is the exact blue screen error you receive?

  · What happens when you try to boot from the CD?

  · You want to reinstall or restore the system?

  · Do you remember any changes made on your computer before the show?

  · Are you able to boot to the desktop?

  · You have saved the data?

  You can check the links below: how to use disk management to configure basic disks in Windows XP:http://support.microsoft.com/kb/309000

  How to partition and format a hard disk using the Windows XP Setup program:http://support.microsoft.com/kb/313348

  Best practices for partitioning a hard drive:http://www.microsoft.com/windowsxp/using/setup/expert/tulloch_partition.mspx

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• With the help of Vista on the laptop. Receive 3 updates on initialize to the top & stop. Do not install. Party at 3 x through process 80070002. How to fix?

  With the help of Vista on the laptop. Receive 3 updates on initialize to the top & stop.  Do not install.  Party at 3 x through process 80070002. How to fix?  3 updates failed to install: KB2779562, KB2705219 and KB2722913.  Constantly configures updates during startup and shutdown.  Takes a long time for the two workers.  Can anyone give advice?

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and 80070002 in C:\Windows\Windowsupdate.log.

• With the help of the network location and mapped a drive to the server FTP. during the transfer of very large amounts of the login information is always lost.

  With the help of the network location and mapped a drive to the server FTP off site; during the transfer of very large amounts of the login information is always lost.  Computer power settings are configured to not to do no matter what, I'm assuming that the ftp server can publish a scenerio timeout but is there a way for my computer and windows to restart the file transfer?

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with networking on the FTP server.

  The question you posted would be better suited in the Technet Forums. I would post the query in the link below.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• With the help of 1.7.0_07 - b11 version JRE Java hotspot Client VM

  I can't use by net cooking system indicates error java and java download does not work with my system with windows 7 giant premium 64 bit computer laptop.

  REPRT ERROR:

  Java plug-in 10.7.2.11
  With the help of 1.7.0_07 - b11 version JRE Java hotspot Client VM
  Home Directory user = C:\Users/
  ----------------------------------------------------
  c: clear console window
  f: finalize objects on the finalization queue
  g: garbage collection
  h: display this help message
  l: dump classloader list
  m: print memory usage
  o: trigger logging
  q: Hide console
  r: reload the policy configuration
  s: dump system and deployment properties
  t: dump thread list
  v: dump thread stack
  x: delete the cache of class loaders
  0-5: set the trace level

  Hello

  1 are you facing this problem with a specific Web site?
  2 are you having the same problem on other browsers as well?
  Please follow the links below to solve the problem.
  Method 1
  How to troubleshoot script errors in Internet Explorer
  http://support.Microsoft.com/kb/308260
  Note: follow the steps as troubleshooting applies to JAVA issues.
  Step 2
  How to enable Java in my web browser?
  http://www.Java.com/en/download/help/enable_browser.XML
  Method 2
  If you still face problems, please uninstall and reinstall JAVA
  Remove all traces of the failure of the Java installation by uninstalling Java:
  
  http://www.Java.com/en/download/help/uninstall_java.XML
  Install Java
  http://www.Java.com/en/download/index.jsp
  I hope this helps.

• With the help of PSE v14 when PSE v10 is still in my iMac with iPhoto and when I click on a photo and click on change, he wants to keep opening PSE v10.  I just installed a temporary version of PSE v14 and would really like to use to see want I can do.

  With the help of PSE v14 when PSE v10 is still in my iMac with iPhoto and when I click on a photo and click on change, he wants to keep opening PSE v10.  I just installed a temporary version of PSE v14 and would really like to use to see want I can do.

  You open iPhoto or organizer? If the latter; Check your configuration. During your installation, make sure you select the application, and not an alias (shortcut). Go to this link.

  PSE14 as an external editor

• With the help of AMPA on non - WS Data Controls

  Hello community MAF .

  I'm developing an Application of MAF that consumes the REST API of WebCenter portal (which is based on the model of HATEOAS).

  I want to make powerful from scratch, including the following:

  -Offline mode (using the SQLite).

  -Persistence, of setting cache and synchronization using AMPA.

  Looks like it's not easier to apply directly on the REST API of WCP AMPA.

  The REST API of WCP is the result of a call of two steps:

  1) authenticate using BASIC authentication against http://Host/repos/api/resourceIndex for the utoken

  (2) use utoken as the URL parameter for the next call of REST for the specific service.

  I know that the Bus Service could be a possibility on the creation of a more simple REST on the WCP REST API, but is not an option right now because that is not easy to map.

  My questions are:

  (1) can we use AMPA on data controls in Java that will call internally to (DB in case of offline mode, REST by program in the case of online mode).

  (2) can define us manually in the persistenceMapping.xml?

  (3) is there anything else more easy to use wizards with HATEOAS base based Services?

  Thanks in advance

  Kind regards.

  Daniel,

  Why is it not service bus an option? You say 'not easy to map', but do the mapping in the MAF makes it not easier, it? the REST API of pressurization is not very easy to mobile, so this transformation to a more usable by using bus service API cost as a good idea for me. See also this article from the A-team.

  Answers to your questions:

  (1) Yes, this is the added value of nucleus of AMPA. You get a service generated the DTC Assistant classes, then you turn this class in a bean data control and use this data control bean for the construction of your user interface. The service class will access local DB and the service REMAINS remote. By default, AMPA will directly show the current data of the local DB, and then in the background call the REST service (online) and refresh the UI, once the REST call has been processed. But this behavior is very configurable and can be changed as you wish.

  (2) Yes, of course, you can manually create data objects, classes of service and persistence mappings, but the wizard is generally much faster.

  (3) HATEOAS logical not for the dynamics of UI where the next action is determined by a link returned in the payload. It is a different model from the static of the UI we build in general with MAF. What is your problem with the help of the wizard of the AMPA?

  Steven Davelaar,

  Oracle Mobile & Cloud A-team.

• SVN: #155021. You cannot update this file with the help of Dreamweaver Subversion integration because a new Subversion client application on your machine has made updates to the file Subversion meta data. For more information on this problem

  Can Hello anyone help?

  After you configure Subversion in Dreamweaver, I get this error again!

  SVN: 155021 #. You cannot update this file with the help of Dreamweaver Subversion integration because a new Subversion client application on your machine has made updates to the file Subversion meta data. For more information about this issue, see http://www.adobe.com/go/dw_svn_en.

  even after following the instructions http://www.Adobe.com/go/dw_svn_en Download the extension, python change the var in windows to say «;» C:\Python26'

  with & without quotes, with or without; before C

  command > comparability of Subversion to get the following error "the Conversion process has failed. Please make sure you have Python installed and you check Python PATH parameter'

  I managed to get all the files after the installation, I locked, unlocked and commit a file to test fact so that was all works well, the only part I'm not retrieves the latest version, this is because Subversion is 1.6.2 and dreamweaver must revert to the version 1.4.5 on local to work, the compile someone at - it an idea what to try next in order to make it work?

  Just a reminder!

  1. I configure Subversion through guidelines on http://help.Adobe.com/en_US/Dreamweaver/10.0_Using/WS80FE60AC-15F8-45a2-842E-52D29F540FED. html
  2. I managed to get the latest SVN version
  3. Lock, unlock and commit a file
  4. Installed Python in C:\Python26 change the path in windows system properties > advanced > Environment Variables > system variables > New > Python =; C:\Python26 also C:\Python26
     
  5. I also tried the same thing in the User Variables
  6. Installed the extension DW Subversion compatibility
  7. 
     Tried to run the compatibly with the command > Subversion comparability in DW
     

  Welcome any suggestion to solve this?

  Hello

  There has been a lot of problems using svn with dw, and I know many people who have stopped trying to operate correctly.

  As much as I know dw will not work with newer versions of svn (over 1.5), and even then, there are a lot of problems, a possible solution is to try subweaver (at- http://code.google.com/p/subweaver/ ), as this has solved some of the problems associated with the use of tsvn dw environment.

  PZ

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• With the help of iPhone 6 s. try to copy the text message with a tap double and get a bubble with icons. How can I copy the message to paste in another?

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  maryml wrote:

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  Press and hold on the text and wait for the copy/more pop up.