With the help of my 8.1 System Recovery DVD Win

Similar Questions

• I wonder if anyone is familiar with this type of problem with the help of a Windows Media Player for DVD videos.

  Hello!
  I came across a problem with my dvd on my laptop drive. The program that I use on my laptop is Media player from Windows. And the laptop will recognize the DVD and everything, but when it starts to play, it gives me this message from Windows Media Player: "Windows Media Player cannot play video DVDs. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings. »

  Now I always use the old Windows XP for my laptop, but I can't seem to understand how to adjust the color quality and lower my screen resolution. Does anyone have a little step by step process that I could follow to do this?

  Lyn24 wrote:
  > Hello!
  > I ran into a problem with my dvd on my laptop drive.
  > The program that I use on my laptop is Media player from Windows. And the
  > laptop will recognize the DVD and everything, but when it starts to play
  > gives me this message Windows Media Player: 'Windows Media Player '.
  > can't read DVD-video. You may need to adjust your Windows screen
  > settings. Open display settings in Control Panel and try again
  ring your screen resolution and color quality settings. »
  >
  > Now, I still use the old Windows XP for my laptop, but I can't
  > seem to figure out how to adjust the color quality and lower my screen
  > resolution. No matter which deals a little step by step I have
  > could follow to do this?

  The problem is that Windows XP does not play DVD movies in native mode. You can
  have a DVD player, but it can only read DATA DVD at this time. In the order
  install a DVD codec to read video DVD discs. First we will
  Install this program from Microsoft and run it, and if you have a DVD
  Codec, it will appear in the display window. Download this program from
  here:

  http://www.softwarepatch.com/Windows/windowsdvdmpeg.html

  If it shows that you don't have a codec DVD installed, then you can
  buy one on one of the links on this page:

  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  --

  Roy Smith
  Windows XP Pro SP3

• Help? With the help of file system Ext3 on key USB on Linux RT target

  We have been affected by problems with the SD cards and USB drives formatted in FAT32 on some devices, according to Linus RT of long-term monitoring (mainly the cRIO-9035). It seems that readers are vulnerable to fluctuations in current and unexpected reboots (which are inevitable on these sites). Write aborted operations make the damaged discs, thus sabotaging logging after reboot.

  We have identified two solutions; implement both gives the best redundancy:

  (1) installation of UPS (uninterrupted power supply for emergency supplies/batteries) - done

  (2) using the file system apparently more robust 'ext3', which is available on the target RT Linux (FAT32, ext2 and ext3) - don't have not so far:

  ->, I was not able to properly format a USB stick for ext3. I use the MiniTools Partition Manager and don't get any errors when create and format partitions. But they appear as 'read only' when it is inserted into the chassis of the RT. All attempts to access it, other than to observe the empty folder sdxx in ' / media "is returning errors.

  Someone had a bit of luck with the help of ext3 disks formatted as data drives on the objectives of the RT Linux? It is worthwhile to solve my problems or should I use FAT32 and the observed risk?

  I do not consider this but a temporary solution:

  I ran into issues when you use MiniTools Partition Wizard to partition and format my thumb on Win10 records. An unidentified change makes the inaccessible disks and freeze the browsing of file on the PC when I try to delete the partition. It was quite annoying!

  I decided to try another partition tool and went for the EaseUs Partition Master (free version for the moment). I formatted successfully one of the troublesome discs with it (to add some uncertainty to the solution, I used another brand sp * banking, new PC to do). The reader now mounted in read-write and allows the startup application create the I want to store files in folders.

  I'm very curious to know the difference between the tools of both partitions and their formatting...

• With the help of an operating system older Compaq is professional Windows. Internet Explorer connected very slowly. .

  With the help of an operating system older Compaq is professional Windows. Internet Explorer connected very slowly. SO I've reworded in safe mode with network and IE has worked very well. I installed Mozilla Firefox and then restarted in normal mode. Then Internet explorer would not connect. How to diagnose in safe mode. What does safe mode or safe mode with network do to help diagnose? Can someone help me solve this problem? Any help would be appreciated thanks in advance.

  Hi, Raymond J,.

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What type of internet connection do you use?

  ·         What security software do you use?

  Follow these methods.

  Method 1: As the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2: Follow the steps in the article.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  How to reset the Protocol Internet (TCP/IP)

• With the help of windows Explorer XP does use CPU to go to 100% and the blocking of the system forever

  With the help of windows Explorer XP does use CPU to go to 100% and the blocking of the system, forever, until closing by force.  What can I do?

  It is very difficult to manage my files.

  I suggest you download Process Explorer. This freeware utility performs a similar function to the Windows Task Manager, but it goes much further.

  For more information about Process Explorer, see here:

  http://www.Microsoft.com/technet/sysinternals/SystemInformation/ProcessExplorer.mspx

  Explorer.exe is used by a number of applications. The posting process and see which element below uses explorer.exe.

• With the help of old gear series noon on El Capitan

  I have a Vox Tonelab SE effects audio Board (around 2004), there the old serial midi on the back ports. I hung with the help of a USB MIDI interface cable. While the USB Midi interface to the show in Audio / Midi set upward and also in the profile system for USB port it does not detect the Vox Tonelab so no communication lunch.

  There is a POWERPC application called ToneLabSE SoundEditor which I downloaded and installed in the hope he would install a driver but I guess that this obviously doesn't work on INTEL in any case. Using Wine I can run the PC version, but still no communication via midi.

  Someone at - it ideas, would like to get this Panel communicating effects via MIDI.

  Thank you

  

  

  

  Solved! Using the WINE app I've run the version of the PC of ToneLab SE editor application. So pretty unintuitively by changing the serial midi to USB, SERIAL interface cables that went to the and out on the Tonelab SE. Now of the Se ToneLab editor I can write banks of programs to hardware Tonelab, but unable to empty the banks since the material Tonelab to software. My main desire was to use Expression pedals on the Tonelab as Midi Ableton controllers and some of the switches to the control of the Looper stomp. Now I can do it all. Hooray!

• With the help of semaphore with a Global Variable - correct use?

  Hi all

  I looked in the use of global variables and in my case, it seemed with the help of a semaphore is the appropriate solution.

  In my case, I use a global variable to store the State of the system. Asynchronous two with screw environment (same VI) will follow two COM ports to see if they get a ' login:' command prompt. If the COM port is associated with Alpha, Charlie, or Echo, it increments by 1, and if it is associated with the Bravo, Delta, or Foxtrot, is incremented by 2 GV. If the GV is 3, the rest of the code will run. In this case, it must be a port COM A, C or E; the other should be B, D or F.

  A VI parent is called inside a loop. He works for the first loop. He never adds up to 3 on the second loop, however. I can't understand why. Please let me know if my code is a poor use of semaphores, or if there is debugging I can try.

  I'm still relatively new to LV, so I'm sorry if my screws are difficult to read. I created this in LV2011.

  Thanks for any help!

  CelerityEDS wrote:

  The output of my time looping (wait GV = 3) goes to the structure of the case on the bottom right (clear SGS, PasswordEntry, etc.), so the GV get indeed consulted by the upper case structure right.

  ??

  Your right upper case structure does not run until your time ends in a loop.  The while loop does not stop until the total is equal to 3.  Where can increment you the world besides structures case you cannot yet?

  Have you tried in your point culminating execution of the VI in order to see how they are actually running?

  Another problem that I see.  Assuming that your first while the loop is going to end.  In the structures of your case, you lock the semaphore.  But you can never unlock the semaphore unless you have the right combination of conditions that allow you to get to the case that unlocks the semaphore.  The conditions are based on data that are read before the start of the case of structure, which means that data will not be read and changed until it all ends.  You have the timeout of your lock semaphore connected on one of the cases, but your semaphore lock can never timeout because you do not have a value on his entry time-out.  I think you have a situation where you can lock a semaphore, then arrive at a situation where you can not unlock, then wind locking up of your cold code.

  I don't really think that you need a semaphore at all.  I think you can protect reading and writing functional your overall using a global variable, i.e. the motor action.  Overall, I think you need to rethink the architecture of your code.

• To create the distribution with the help of disk manager.

  Dear all, I m facing problem with blue screen error. And my all partitions is corrupted and I like repartition with the help of disk manager. Win xp bootable cd its not working. so pls help thank you & best regards

  Hi zubair.

  · What is the exact blue screen error you receive?

  · What happens when you try to boot from the CD?

  · You want to reinstall or restore the system?

  · Do you remember any changes made on your computer before the show?

  · Are you able to boot to the desktop?

  · You have saved the data?

  You can check the links below: how to use disk management to configure basic disks in Windows XP:http://support.microsoft.com/kb/309000

  How to partition and format a hard disk using the Windows XP Setup program:http://support.microsoft.com/kb/313348

  Best practices for partitioning a hard drive:http://www.microsoft.com/windowsxp/using/setup/expert/tulloch_partition.mspx

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• With the help of Vista on the laptop. Receive 3 updates on initialize to the top & stop. Do not install. Party at 3 x through process 80070002. How to fix?

  With the help of Vista on the laptop. Receive 3 updates on initialize to the top & stop.  Do not install.  Party at 3 x through process 80070002. How to fix?  3 updates failed to install: KB2779562, KB2705219 and KB2722913.  Constantly configures updates during startup and shutdown.  Takes a long time for the two workers.  Can anyone give advice?

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and 80070002 in C:\Windows\Windowsupdate.log.

• Problems with the help of web camera, it shows it programs and on the desktop. But when I double click on it. It will go to the program do not know what to do. Help, please. Thank you.

  Having problems with the help of web camera program does not work when I click it. don't know what to do. Please help thanks.

  Hello

  Right click on the shortcut tab icon - properties - look on the target line to see where and what type of program
  is supposed to work.

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• With the help of HP printers in Windows 8

  Windows 8 is the latest operating system produced by Microsoft, Inc.  There are a few differences in the way that you access functions such as printing and scanning from older versions of Windows operating systems.

  Whenever you install a printer in Windows 8, there are a few options to do: complete features in OS driver or driver from Windows Update.  There are similarities between the various drivers, but not everything works the same.

  However, HP has released a document with detailed instructions on the use of HP printers in Windows 8. The document can be found below:

  With the help of HP printers in Windows 8

  Good impression!

  Hope this helps everyone!

• With the help of 1.7.0_07 - b11 version JRE Java hotspot Client VM

  I can't use by net cooking system indicates error java and java download does not work with my system with windows 7 giant premium 64 bit computer laptop.

  REPRT ERROR:

  Java plug-in 10.7.2.11
  With the help of 1.7.0_07 - b11 version JRE Java hotspot Client VM
  Home Directory user = C:\Users/
  ----------------------------------------------------
  c: clear console window
  f: finalize objects on the finalization queue
  g: garbage collection
  h: display this help message
  l: dump classloader list
  m: print memory usage
  o: trigger logging
  q: Hide console
  r: reload the policy configuration
  s: dump system and deployment properties
  t: dump thread list
  v: dump thread stack
  x: delete the cache of class loaders
  0-5: set the trace level

  Hello

  1 are you facing this problem with a specific Web site?
  2 are you having the same problem on other browsers as well?
  Please follow the links below to solve the problem.
  Method 1
  How to troubleshoot script errors in Internet Explorer
  http://support.Microsoft.com/kb/308260
  Note: follow the steps as troubleshooting applies to JAVA issues.
  Step 2
  How to enable Java in my web browser?
  http://www.Java.com/en/download/help/enable_browser.XML
  Method 2
  If you still face problems, please uninstall and reinstall JAVA
  Remove all traces of the failure of the Java installation by uninstalling Java:
  
  http://www.Java.com/en/download/help/uninstall_java.XML
  Install Java
  http://www.Java.com/en/download/index.jsp
  I hope this helps.

• How to create the ISO image of windows 8 with the help of boot, efi, sources, and support files

  Hello
  I followed folders in my USB key:

  Boot
  EFI
  Sources
  Support,

  and the following files:

  Setup
  Bootmgr.EFI
  Bootmgr

  How can I create an ISO image of windows 8 with the help of these files and folders. I even installed ADK, but I couldn't keep up with it.
  I would be very grateful if someone could help me out here.

  Secondly, I would also like to know how to create a system image of WINDOWS 8, where the hard drive breaks down.

  Concerning
  MAK

  If you have the upgrade key, go here

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can go for the use of win8 / win7 / vista to match highlights you want - and download the win8 installation and run the installation with your key to download you need to install windows from that.  Will allow you to have an iso bootable.

  Make a picture of the control panel system / Windows 7 file recovery / system Image.  I certainly wouldn't put it on dvd.  It will be too.   Find an old preference portable hard drive and buy a $ 20 usb box, get an external hard drive.

• Failed to create a 3D text (or 3D nothing else) all options in the 3D Panel are grayed out. With the help of CC 2015.1.2 on Mac Pro

  Failed to create a 3D text (or 3D nothing else) all options in the 3D Panel are grayed out. With the help of CC 2015.1.2 on Mac Pro (end 2013)

  Thanks for the update.

  Go to the Photoshop preferences > 3D > check whether it shows VRAM than 3072 MB

  Look for the system updates and see if there are updates waiting for your graphics card drivers.

  And make sure that the document you are opening is in RGB and CMYK mode not.

• SVN: #155021. You cannot update this file with the help of Dreamweaver Subversion integration because a new Subversion client application on your machine has made updates to the file Subversion meta data. For more information on this problem

  Can Hello anyone help?

  After you configure Subversion in Dreamweaver, I get this error again!

  SVN: 155021 #. You cannot update this file with the help of Dreamweaver Subversion integration because a new Subversion client application on your machine has made updates to the file Subversion meta data. For more information about this issue, see http://www.adobe.com/go/dw_svn_en.

  even after following the instructions http://www.Adobe.com/go/dw_svn_en Download the extension, python change the var in windows to say «;» C:\Python26'

  with & without quotes, with or without; before C

  command > comparability of Subversion to get the following error "the Conversion process has failed. Please make sure you have Python installed and you check Python PATH parameter'

  I managed to get all the files after the installation, I locked, unlocked and commit a file to test fact so that was all works well, the only part I'm not retrieves the latest version, this is because Subversion is 1.6.2 and dreamweaver must revert to the version 1.4.5 on local to work, the compile someone at - it an idea what to try next in order to make it work?

  Just a reminder!

  1. I configure Subversion through guidelines on http://help.Adobe.com/en_US/Dreamweaver/10.0_Using/WS80FE60AC-15F8-45a2-842E-52D29F540FED. html
  2. I managed to get the latest SVN version
  3. Lock, unlock and commit a file
  4. Installed Python in C:\Python26 change the path in windows system properties > advanced > Environment Variables > system variables > New > Python =; C:\Python26 also C:\Python26
     
  5. I also tried the same thing in the User Variables
  6. Installed the extension DW Subversion compatibility
  7. 
     Tried to run the compatibly with the command > Subversion comparability in DW
     

  Welcome any suggestion to solve this?

  Hello

  There has been a lot of problems using svn with dw, and I know many people who have stopped trying to operate correctly.

  As much as I know dw will not work with newer versions of svn (over 1.5), and even then, there are a lot of problems, a possible solution is to try subweaver (at- http://code.google.com/p/subweaver/ ), as this has solved some of the problems associated with the use of tsvn dw environment.

  PZ