With the help of old Windows CD to install the optional component deleted Outlook Express and I need to get it back!

We have received a Windows XP laptop from a friend and use Outlook Express for e-mail. We had a number of other things such as pilots with the laptop but not the Windows CD.  Then we wanted to reduce the size of a jpg image and I wanted to use MS Photo Editor to do what I then read on the Microsoft site that I could get by installing from any Windows CD.  Therefore, I used an old Windows XP CD from another PC, choose to install an optional component and chose as accessories to the next screen, ensure that all other options were struck down, assuming that so they would simply not be installed.  One of them was Outlook Express and Internet Explorer.  Instead of THIS the wizard DELETED Outlook Express and Internet Explorer.  When I tried to get him back by checking these options, asked me for the 2nd day of the original installation CD - which of course, I did not!  I have managed to re - download IE8 from Microsoft Download site, but of course do that for Outlook Express - and we don't have Office on this computer: (.)  Help!  (a) is it possible to reverse this process to remove/uninstall Outlook Express? (b) we now lost all our emails? (c) I already tried to go back to a previous good configuration, but that has not worked.

Thank you in advance for advice, answers or help.

First, make sure that OE has actually disappeared.  Go to start | Run and paste this and see if OE starts:

"c:\program files\Outlook Express\msimn.exe".

Including the quotes and see if OE starts.  Very often "withdrawal" OE removes just the shortcut to it.

If this does not work, you can try reinstalling XP SP3 (http://windows.microsoft.com/en-US/windows/help/learn-how-to-install-windows-xp-service-pack-3-sp3), but you should probably uninstall IE8 first and then reinstall it later.

You can also go to the c:\windows\inf directory and locate the msoe5.inf file and right-click on it and choose Install and see if that fixes things.

See if that works.

Steve

Tags: Windows

Similar Questions

  • Utility to stop smoking hard drive intermittently indicate that the hard disk is a failure and we need to get the data out of it.

    Scanned to find errors and told to back up my files, because I was going to have to drive failure.  He said WDC WDI 600JS-22N CB1 ATA Device Volume C:\ was the problem and my drive was going to fail. Run anothr says check my drive is healthy without problems. What should I do?

    Run the diagnostic software that you can download from this site:

    http://support.wdc.com/product/download.asp?GroupId=613&lang=en

    To arrange for a replacement disc if it is faulty. If the reader is installed in your computer when you bought it, and it might still be under warranty, check with the manufacturer of the computer. Also, it could be caught by a manufacturer's warranty. Visit the site of the manufacturer of the car.

    If it's to your advantage to retuen it to the manufacrurer for replacement, check to see if they will do a "hot swap". In this way, they will send you a replacement before you ship the defective drive to them. In this way, it is easier to transfer your operating system files and user to the new drive.

    Good luck.

    Tom Ferguson

  • Need help. My tool Panel disappeared and I need to get it back

    Need help. My tool Panel disappeared and I need it back.

    Window > tools

  • How can I get larger fonts and change the background color in Outlook Express, a light blue to improve my vision

    original title: vision problems.  How can I get bigger fonts in incoming messages on Outlook Express?  How can I change the background color in Outlook Express for a light blue to improve my vision of the messages.e

    I have problems with my vision.  How the larger font for messages in Outlook Express so that I can see them?  Also how can I make the background is easier on my eyes.  As a light blue or something.  Thank you.

    You can change the font size of incoming emails by going to the Tools menu in Outlook Express and selecting Options.  Open the read tab, and then click the fonts option.  In the fonts window, click on font size and make your selection.  I always click OK, then apply and OK to be sure change stick.  You may close OE and then reopen it for the change to take effect.

    I don't know of any way to change the background color of the e-mails received.  I'm sure someone will have an answer for this procedure.

    Rosie
    Dell OptiPlex GX260, 2.40 GHZ, Pentium 4, 80G HD, Windows XP Pro (SP3), IE8, Avira, Spybot S & D, SpywareBlaster 4.2, 4.0 OnlineArmor

  • Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This

    Oops... .the everything in the title... My apologies!

    Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This problem may occur when you use AMD Radeon HD 5xxx card graphics series 8xxx running versions of pilot 14.501.1003, 14.502.1014 and 15.200.1062.1004. For the Solution of the page install the AMD Catalyst 15.8 Beta Driver for Windows (posted August 31, 2015).  However, there are now a 16.1 driver... would this work with Lightroom 6buttons Photpshop CC without problem or should I stay with 15.8 beta for Windows driver (Windows 8.1.

    Thank you very much

    Paul Winstone

    Hi Paul,.

    This article was created when users have faced problem with old drivers for AMD graphics card.

    Yes, you can upgrade to the last 16.1 pilots and who should work well however, you should have 1 GB VRAM or more to take advantage of the GPU processors.

    Kind regards

    Claes

  • Constantly receipt dialog box message "Windows - No disk" Exception Processing Message c0000013 parameters 75b6f7c 75b6bf7c 75b6bf7c; with the options to CANCEL, TRY AGAIN, or CONTINUOUS.

    Constantly receipt dialog box message "Windows - No disk" Exception Processing Message c0000013 parameters 75b6f7c 75b6bf7c 75b6bf7c; with the options to CANCEL, TRY AGAIN, or CONTINUOUS. By selecting CANCEL or CONTINIUE four times to close the box, but in a short time box reappears.

    I refer you here:
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/win-XP-Pro-Windows-nodisk-error-just-agravating/5e0de54b-D921-4897-BEBC-c882e19a76c0?page=1&TM=1307282043410

    You can expect ad try some things.

    You can actually ask why forums MS Answers just can not help with XP problems?

  • Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

    Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

    Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

    The error you mentioned does not match the description of the usual Windows blue screen errors. When I put this error for a web-search, it has proved to be a common problem with some HP computers. I was able to get my hands on the following link for a thread in HP communities that contains information about this error. Have a read of the content in this link and see if this applies to your situation:

    http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/HP-6730b-quot-BIOS-application-error-501-quot/TD-p/1075640

    Windows errors blue screen looks something like this. If you receive these errors, let us know about it as well as the complete info you see on the screen. And the error you mentioned in your initial post, I guess that the HP support forums would be a better place to discuss. Here is the link to the HP support forums:

    http://h30434.www3.HP.com/

  • I see two windows 'readers' when I boot with the Option key

    I had to reinstall Windows 10 (with BootCamp).  Now, I see two windows 'readers', when I boot with the Option key button.

    How can I remove a?

    Start two of them in the same installation of Windows?

  • 10.1.2 iMovie crashes while editing. Failed attempts to re - open. Open with the option key down key allows you to delete the preferences but contains a relative error incompatible graphics card will then appear.  With the help of El Capitan

    iMovie 10.1.2 falls down during editing of a film, usually by doing something like adding a title or a transition.  Failed attempts to restart.  Try to reboot with the option key + command allow you to remove preferences.  Then either receive an error indicating that the graphics card is incompatible or the application block requiring a force quite.  Restart or stop the iMac translates the suspended system requiring a manual stop holding down the Start button.  Restart in Safe Mode and then the normal startup will allow iMovie to load.  But after a few minutes of work with the program, it crashes and scenario again.  I use El Capitan 10.5.11 on an iMac of 2013.  I deleted the iMovie app and reloaded it, no change.  Someone has an idea for a fix?

    What are the specifications of your clips you want to change? Try to create a new user and see if FCPX is behaving.

  • Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). Please tell me how to connect...

    Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). I tried parameter as point of access, AD-hoc, Connect automatticaly etc but will not connect... Please tell me how to connect...

    Hi Sumit and thanks for posting.

    Your Athreos has never connected? If it has connected then it not only connects it to insecure networks? Also after can trying to connect you do the following?

    Start, run, CMD, OK to open a command prompt:

    Type the following command:

    IPCONFIG/ALL

    [Note that there is no space between the oblique and ALL bar].

    Right click in the command window and choose Select all, and then press ENTER.
    Paste the results in a message here.

    I hope this helps. After the back if you have any questions.

    Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi?

    Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.

    Yes, I'm doing exactly this with the same put in place.

    If the problem persists the next relative to the following articles might help you.

    Troubleshooting home sharing

  • I got a mini iPad 2 32 GB as a gift to replace a dead laptop but I'm not at all familiar with the product. Can I create and save word documents a presentations on a flashdrive off iPad mini?

    I got a mini iPad 2 32 GB as a gift to replace a dead laptop but I'm not at all familiar with the product. Can I create and save word documents a presentations on a flashdrive off iPad mini?

    You can create word documents and powerpoint presentations, but you cannot save them directly on a normal USB.

    Microsoft made a version of office for iPad, you can find it in the App Store. Here is a link:

    Word

    https://iTunes.Apple.com/en/app/Microsoft-Word/id586447913?Mt=8

    PowerPoint

    https://iTunes.Apple.com/us/app/Microsoft-PowerPoint/id586449534?Mt=8

    There are usb drives that work with iPads, and you can save documents to those who use their own applications.

    http://9to5Mac.com/2015/03/20/the-best-iPhoneiPad-USB-flash-drives-with-Lightnin g-connectors.

    Also I suggest you read through the iPad User Guide:

    http://help.Apple.com/iPad/9/

  • Unexpected behavior with the Option "record in the result.

    Hello

    I have unexpected behavior with the Option "record in the result.

    I have a few steps in the subsequence 'X', this subsequence passes a Boolean parameter. According to the value of the parameter I change the "Recorgind results" Option to report it or not. The thing is that if 'result Recorgind' set at race time I modofy by changing the value of Step.ResultRecordingOption to "Enable" and "Disable", the step is not reported until the same sous-suite 'X' is called for the second time (without changing the parameter passed).

    For example: (Preconditon: result Recorgind Option of all value sous-suite x are defined as Disable)

    1 CallSubsequenceX(Parameter: Enable)

    2 CallSubsequenceX(Parameter: Enable)

    3 CallSubsequenceX(Parameter: Disable)

    4 CallSubsequenceX(Parameter: Disable)

    Expected result:

    1. measures have been reported.

    2. measures have been reported.

    3. measures have not been reported.

    4. measures have not been reported.

    Result:

    1. measures would not same value Step.ResultRecordingOption has been changed to 'enable '. (Not Ok)

    2. measures have been reported. (Ok)

    3. measures reported same value Step.ResultRecordingOption has been changed to 'disable '. (Not Ok)

    4. measures have not been reported. (Ok)

    I use TestStand 2013 (5.1.0.226)

    Thanks in advance.

    -Josymar.

    Hi josymar_guzman,

    I just review the sequence and indeed we´re experience unexpected behavior with the Step.ResultRecordingOption callback. By a reason when you run the callback in the expression before each step section, the statement runs only until the next sequence is called, which is not what we want.

    To avoid this, you can place a statement before each step of the sequence, so you can change the State of the Option "record result" for the sequence running (and it is only the following). You can try something like this

    where the expression of the statement will be the recall "RunState.NextStep.ResultRecordingOption is YourCondition". With this, we guarantee that the results of the next step will be saved or not. I also remove the expression in the expression prior to each step section, because the condition is now on the statement before each step.

    I tried and it works fine. I´ll set the sequence that you share with me, with the changes. I hope this will help you and solve your problem.

  • I have a problem with the simulation in Matlab 6.5 and LabVIEW for PID controllers

    I have a problem with the simulation in Matlab 6.5 and LabVIEW. I have a few methods for granting regulators PID in MATLAB to go but not of LabVIEW. Degree of international teams of two transfer but when I passed to the fourth degree is no longer working. We have changed the formula to calculate the parameters for the fourth year and gave me some good values for assignment of Matlab, but when I put on LabVIEW are not resolved. the formulas are available in PDF format and are. Please help me and me someone if possible. Thank you
    Lim.4 generation in comparison methods and the MATLAB program settings are for the service of transfer to the second degree.

    Hello Lascarica,

    I noticed that you are using the screw of PID. Gains on these screws are based on TIME instead of GAIN. You should be able to build a PID regulator and vary the gains and then compare the results.

  • I try to install MSI 4.5 with the windowsXP-KB942288-v3 - x 86 .exe file. I get a lot of messages that Setup could not back up the registry key... 5. access is denied.

    MSI 4.5 installation problems

    I try to install MSI 4.5 with the windowsXP-KB942288-v3 - x 86 .exe file. I get a lot of messages that Setup could not back up the registry key... 5. access is denied.

    I get this for about 10 different registry keys. If I hit ignore whenever Setup ends, but he told me that he have not installed properly and windows may not work.
    Any body have ideas of how to do to solve this problem?
    Thank you

    I did some further research and came across this http://support.microsoft.com/kb/949377 while it is not the same update I tried to install it, the problem seemed similar. I tried Microsoft fix it at the bottom of the page and I tried again to install MSI 4.5. This time, it worked.

Maybe you are looking for

  • HP photosmart 7510-e & mac does not connect to print;

    Recently successfully installed HP photosmart 7510-e all in one printer on wireless home safe and functional very well. Today press & won't print. Printed from the other laptop, but not mine. performed tests & said my Macbook pro says unknown device

  • Guitars: strings and frets

    How do an own rope (like an e major Am) If you can navigate and search linke can you find me photo showing howto put your hand on the frets to make an own cohord also please find me the link

  • Computer does not accept the dates of restoration?

    The almost immediate and repetitive Google chrome crashing drove me to the restore point.  Then, during the last part of the "System Restore" process, computer says that he cannot accept a given restore date.  Afterwards, I checked every available da

  • you don't have permission to open this file, contact the file owner or administrator to get permission

    My windows\system32 folder, I cannot access some files in this folder.  I recently installed a monitoring program on my laptop and it is necessary for me to admit that some of the files in the system folder of 32 in April for the antivirus program. 

  • Blue Screen crashes randomly

    I had to reinstall my Windows XP Pro SP3 I started to feel blue screen randomly crashes. The code that is displayed is: STOP: 0x000000D1 followed: (0x322B745F, 0 x 0, 00000002 00000000, 0x322B745F) or: 0x3170505F, 0 x 0, 00000002 00000000, 0x3170505F