With the help of strings concatenated in the Structure of the case

Hello world

I'm all new to LabView. Right now, I just trying to build a graphic program of different waves (such as the sine or square) with or without different types of noise. I concatenated two strings and then participating in a housing structure. Nothing graphic when have two concatenated options, but it does not work when it's just the different types of wave are chosen. I think it might have to do with how I'm the each case titration structure option, but I'm not sure. For any help or suggestion is greatly appreciated.

I would use a sequence of structures of the case. Take it step by step. Use enumerations for readability.

Tags: NI Software

Similar Questions

How to make a video in Labview that synchronize with the case data?

Hi guys,.

I do a program which displays the case data from a satellite to different positions. (For example, to position more near the Sun, the temperature data are higher...)

To make the most interesting façade, I add in a video of a satellite in orbit around the Earth. The video must synchronize with the data that I show.

My satellite orbital time is 90 minutes = 5400 seconds. If I use the method of control of ring photo, I have to import 5820 photo frames in the control of ring image. My understanding is that every time that the user can import an image (correct me if I'm wrong). That would mean that I have to import the photos in 5400 times.

Is there another way to do this? I don't want to waste my time on the import of so many images.

Vanessa

If it's a video you have, I would have a look at the incorporation of some sort of video player in the façade through ActiveX. It is not something I've ever tried, but it should be possible and will save you having to generate 5000 + images!

There is a resource here on the use of VLC with LabVIEW: https://decibel.ni.com/content/docs/DOC-24114

If you can embed a video player and can be driven through ActiveX, then you should be able to do what you want!

Dead pixel blackBerry Smartphones and the problem with the case of my BlackBerry 9780

Hello world

Recently, I bought a BlackBerry 9780 by Vodafone Spain (23 December) and I found a few problems.

One of them is the presence of a dead pixel in the upper right and the feeling of the case a little weak in the left side that, when you touch it you can feel it creaks a bit.

I would like to know if the warranty of BlackBerry or Vodafone Spain will cover this problem or if some of the new users of this model of BlackBerry noticied some of these problems and knows how to solve this problem.

Sorry if they have problems with spelling. My usual language is Spanish .

Thank you very much.

A dead pixel is a hardware fault, and there is no miracle for her.

Check if you can get a replacement.

using members of the cast with the case of the declaration
Hi guys,.

can someone guide me how to use a "case _ of" with the members of the cast rather than sprites?
OK, I see. You can use the case statement and replace the
Manager executeBranchingMenu for this example.

------------------------------------------------------
on executeBranchingMenu NomMenu, commandName
commandName case
("Item 1, 1"): go to frame "an image tag.
("Item 1, 2"): go to frame "a few other image tag.
-etc.
cases of termination
end
---------------------------------------------------------

But there is a solution even more simple that does not require using a case
Statement at all. Your frame labels just name "Item 1, 1", "Item 1," 2",
etc and use it. It will save you a lot of unnecessary code.

---------------------------------------------
on executeBranchingMenu NomMenu, commandName
go frame commandName
end
-----------------------------------------------

Furthermore, nothing new in this example of a film that holds the game
head back, then you probably want to add code to do this, otherwise, it will be
jump to the menu. It can be added to the film script.

--------------------
on exitFrame
go part
end
-------------------

Problem with the case where the clause

Hello
I want to use cases in which clause. I wrote a very simple query to test how it works. However, I always got an error message. Here's what I did.
Select eid, firstname, lastname from employee where eid = 1 works fine
Select eid, name, name of the employee
where
cases where 1 = 1 then eid = 1
When 1! = 1 then eid = 2
end
I ORA-00905: lack of keyword.
Did I miss something?
Thank you
Jennifer

Hi, Jennifer.

Why do you want to use BOX in a WHERE clause? The wonderful thing about the CASE is that it allows you to do IF-THEN-ELSE logic. In a SELECT clause, or an ORDER BY clause, this is really useful, but the WHERE clause already allows you to use the IF-THEN-ELSE logic.

However, if you use the BOX in a WHERE clause, it is as it does nowhere else. Always BARGAIN instead of a single expression in a SQL data types. All the clauses THEN (and ELSE, if there is one) must return a single expression, such as the NUMBER. (There is no BOOLEAN data type in SQL). So, you can use a CASE statement like this:

...

CASES WHERE

WHEN 1 = 1 THEN 1

WHEN 1! = 1 THEN 2

END = eid

Here, the CASE expression takes the place of a NUMBER.

However, if I was not sure if 1 = 1 or not, I would write the condition in this way, without a CASE expression:

WHERE (1 = 1 AND eid = 1)

OR (1! = 1 AND eid = 2).

I agree with the case of the adobe photography, I recentuy to the top of the photoshop for cc2015. My lightroom program is shown as lightroom 5.7 and no control 6. Is made on the upgrade to lightroom 6

I checked in lightroom programs and it says that it is up-to-date, why can't switch to lightroom 6

Hi James,

Please check the configuration of your system and let me know if it is compatible with Lightroom 6.

The system configuration required

Regards

Megha Rawat

error with the case statement use what void const query

Hi all.

I have found the error in the result set, and then use subqueries and cases of declaration.

Preparation for example.

2 examples of tables creation.

CREATE TABLE T1 
AS
(
    SELECT 1 ID , 1 F1 FROM DUAL
    UNION 
    SELECT 2 ID , 1 F1 FROM DUAL
    UNION 
    SELECT 3 ID , 1 F1 FROM DUAL
) ;

CREATE TABLE T2
AS
(    
    SELECT 2 ID FROM DUAL
    UNION 
    SELECT 3 ID FROM DUAL
) ;

This statement returns NULL in subquery

SELECT 
T1.ID, TT2.ID , TT2.ISBUG AS NO_BUG 
FROM T1 
LEFT JOIN
(
SELECT ID , -1 ISBUG FROM T2
)TT2
ON T1.ID = TT2.ID
WHERE TT2.ID IS NULL

But this statement (with operator CASE) does NOT return null in subquery

SELECT 
 CASE  WHEN 1 = 1 THEN 1 END AS C1,
T1.ID, TT2.ID , TT2.ISBUG 
FROM T1 
LEFT JOIN
(
SELECT ID , -1 ISBUG FROM T2
)TT2
ON T1.ID = TT2.ID
WHERE TT2.ID IS NULL

Why?

Oracle 11.2.0.2.0

Published by: 927438 on 13.04.2012 03:27

Published by: 927438 on 13.04.2012 03:31

Maybe it is related to this one

outer join of 11g with case - strange results statement.

seems to be a bug

HI, I'M PREPARING THE MARKSHEET PROGRAM IN PL/SQL WITH THE CASE BUT I FOUND SOME MISTAKE CAN SOLVE THIS ERRORS...

DECLARE
V_TOT_MARKS NUMBER CONSTANT: = 500;
V_MKS_OBT NUMBER: = 0;
NUMBER of V_FPAPER: = NVL (& FIRST_PAPER, 0);
NUMBER of V_SPAPER: = NVL (& SECOND_PAPER, 0);
NUMBER of V_TPAPER: = NVL (& THIRD_PAPER, 0);
V_4PAPER NUMBER: = NVL (& FOURTH_PAPER, 0);
V_5PAPER NUMBER: = NVL (& FIFTH_PAPER, 0);
NUMBER OF V_PER (5.2): = 0;
V_GRADE VARCHAR2 (05);
V_RES VARCHAR2 (30);
BEGIN
V_RES: = V_FPAPER > = 40 AND V_SPAPER > = 40 AND V_TPAPER > = 40 AND V_4PAPER > = 40 AND V_5PAPER > = 40;
V_MKS_OBT: = V_FPAPER + V_SPAPER + V_TPAPER + V_4PAPER + V_5PAPER;
V_PER: = TRUNC ((V_MKS_OBT / V_TOT_MARKS) * 100, 2);
V_RES: = CASE WHEN V_PER BETWEEN 95 AND 100 THEN V_GRADE 'A-1 '.
WHEN V_PER BETWEEN 85.00 AND 94.99 THEN V_GRADE "A".
WHEN V_PER BETWEEN 75.00 AND 84.99 CAN V_GRADE 'B '.
WHEN V_PER BETWEEN 40.00 AND 74.99 V_GRADE THEN 'C '.
WHEN V_PER BETWEEN 30,00 AND 39.99 V_GRADE CAN "FAIL".
END OF ANOTHER "FAILED."
DBMS_OUTPUT. PUT_LINE (' FIRST BRANDS OF PAPER: = ' |) V_FPAPER | (' / 100');
DBMS_OUTPUT. PUT_LINE ("SECOND BRANDS PAPER: = ' |") V_SPAPER | (' / 100');
DBMS_OUTPUT. PUT_LINE (' THIRD PAPER BRANDS: = ' |) V_TPAPER | (' / 100');
DBMS_OUTPUT. PUT_LINE (' FOURTH BOOK BRANDS: = ' |) V_4PAPER | (' / 100');
DBMS_OUTPUT. PUT_LINE ("BOOK MARKS FIFTH: = ' |") V_5PAPER | (' / 100');
DBMS_OUTPUT. PUT_LINE ('TOTAL POINTS: = ' |) V_MKS_OBT | » /'|| V_TOT_MARKS);
DBMS_OUTPUT. PUT_LINE (' % / GRADE: = ' |) V_PER: ' / ' | V_GRADE);
END;
/

A lot of mistakes in your block, I think that you are looking for something like this:
```
DECLARE
  V_TOT_MARKS CONSTANT NUMBER := 500;
  V_MKS_OBT   NUMBER          := 0;
  V_FPAPER    NUMBER          := NVL ( &FIRST_PAPER, 0 ) ;
  V_SPAPER    NUMBER          := NVL ( &SECOND_PAPER, 0 ) ;
  V_TPAPER    NUMBER          := NVL ( &THIRD_PAPER, 0 ) ;
  V_4PAPER    NUMBER          := NVL ( &FOURTH_PAPER, 0 ) ;
  V_5PAPER    NUMBER          := NVL ( &FIFTH_PAPER, 0 ) ;
  V_PER       NUMBER ( 5, 2 ) := 0;
  V_GRADE     VARCHAR2 ( 05 ) ;
  V_RES       VARCHAR2 ( 30 ) ;
BEGIN
  V_MKS_OBT       := V_FPAPER + V_SPAPER + V_TPAPER + V_4PAPER + V_5PAPER;
  V_PER           := TRUNC ( ( V_MKS_OBT / V_TOT_MARKS ) * 100, 2 ) ;
  select case
  WHEN V_PER BETWEEN 95 AND 100 THEN 'A-1'
  WHEN V_PER BETWEEN 85.00 AND 94.99 THEN 'A'
  WHEN V_PER BETWEEN 75.00 AND 84.99 THEN 'B'
  WHEN V_PER BETWEEN 40.00 AND 74.99 THEN 'C'
  WHEN V_PER BETWEEN 30.00 AND 39.99 THEN 'FAIL'
  ELSE 'FAIL'
  end
  INTO V_GRADE
  from dual;
  DBMS_OUTPUT.PUT_LINE ( 'FIRST  PAPER MARKS := '||V_FPAPER||'/100' ) ;
  DBMS_OUTPUT.PUT_LINE ( 'SECOND PAPER MARKS := '||V_SPAPER||'/100' ) ;
  DBMS_OUTPUT.PUT_LINE ( 'THIRD  PAPER MARKS := '||V_TPAPER||'/100' ) ;
  DBMS_OUTPUT.PUT_LINE ( 'FOURTH PAPER MARKS := '||V_4PAPER||'/100' ) ;
  DBMS_OUTPUT.PUT_LINE ( 'FIFTH  PAPER MARKS := '||V_5PAPER||'/100' ) ;
  DBMS_OUTPUT.PUT_LINE ( 'TOTAL  MARKS       := '||V_MKS_OBT||'/'||V_TOT_MARKS
  ) ;
  DBMS_OUTPUT.PUT_LINE ( 'PER% / GRADE       := '||V_PER||' / '||V_GRADE ) ;
END;
/
```

the cooling fan blades began in friction with the DV8342 model cases

The cooling fan blades began in friction with the case on the DV8342 model. That's pretty much all... I moved by typing possible positions. I shook the h * he's out of it simply to throw on the floor. I've been a consultant SAP... built my first full flight computer "Fairness of the Epson" in 1982... hard drives had not been invented for PCs yet.

Sorry for the hike, but I wanted to create my knowledge of pc s until I am bombarded with a lot of people think that they are contributing by asking "is there a piece of paper stuck in there. Just to clear these issues... nothing is stuck in the fan what so ever... it's more like plastic veiled.

And of course this model I can't find an easy way to access the fan... next to break the cooling slots in the case of.

Hello

Check with HP support, their documentation online and ask in their forums.

Support HP & drivers
http://welcome.HP.com/country/us/en/support.html

Contact HP
http://welcome.HP.com/country/us/en/contact_us.html

HP forums
http://h30434.www3.HP.com/PSG/

Reduce heat and the fan noise by cleaning the air vents
http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01657439&LC=en&cc=us&DLC=en

How to replace the fan in an HP laptop
http://www.ehow.com/how_4557146_replace-fan-HP-laptop.html

I hope this helps and happy holidays!

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

First elements keep crashing with the rendering and editing environment!

Hey
I used adobe first elements 10 a little over a month now. But recently pre began to plant, then I made a video!
I began searching on "Adobe premiere elements 10 crash supply", but has not found an answer. But, I have found that some people had the problem with crash made when the bar reached process 27%, I tried to make twice in a row and notice that my rendering where crashing to 31%!
I really have no idea what could be the problem!
4g RAM
3, 20ghz cpu intel
64 bit

See also this article on PRE to crash, or suspended: http://forums.adobe.com/thread/792580?tstart=0

He begins with a checklist for the pre, then goes into details on the setting of the system and OS, and then goes in the resolution of problems, with links to other articles and also tools to help solve the problem (s). The first part is pretty easy, and then things take "degree of difficulty", as you progress, ending with the case of the unexplained.

Good luck

Hunt

Problem with the iPhone 6 Selfie camera

I have 6 64 gb silver white iphone I am facing a problem with my iphone selfie camere, I recently see the camera gray Crescent front...

What can I do

Is there a case on the iPhone? If so, remove it and take another

photo. If this clears the problem, either set the camera

hole in your case, or use another case that does not interfere

with the case.

If no case or remove the case does not resolve the problem.

make an appointment on the Apple store nearest to have rated free iPhone.

Once the diagnosis is made, staff will explain your options.

Make a Genius Bar reservation

http://www.Apple.com/retail/Geniusbar/

Problem with the Db link
Hi Experts,

I am facing a problem with Dblink

AMT OF remote Db
```
X1 =
  (DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ABC.DEF.COM)(PORT = XXXX)))
    (CONNECT_DATA = (SID = X1)))
```
Local Db AMT
```
 
X2 =
  (DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = XYZ.DEF.COM)(PORT = YYYYY))
    )
    (CONNECT_DATA =
      (SID = ELF)
      (GLOBAL_NAME = ELF.world)
    )
  )
```
I am able to connect to X 1 with the id user USR & PWD password

However, when I create db link
```
 
create database link L1
connect to USR
identified by PWD
using 'X1'
```
It is created, however when I test, he says the invalid user id and password

Please let me know what I am doing wrong

Thanks in advance
Kind regards

Published by: 34MCA2K2 on July 11, 2012 08:37

Published by: 34MCA2K2 on July 11, 2012 09:18
Please refer to this http://lihaobin.com/?p=78

Maybe a problem with the case-sensitive password

Duplicate values are returned by using the case statement

Hello PL/SQL gurus and experts.

I use Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64-bit Production version

I am currently stuk with problem with the case values in double - displayign

Once I am using the following query (join of two tables)

select t.student_nm,
f.Test_RNK,f.Exam_rnk
from class_fact f,
method_dim   t
where t.method_key = f.class_key 
AND F.DE='H'
AND F.Date between '20120101' and '20120631'

It gives the student name and corresponding test and review

But if I use it as a query, then it displays a lot of values in double.

select t.student_nm,
(case when trim(upper(F.date)) between '20120101' and '20120631' and trim(upper(F.DE)) = 'H' then
                   F.Exam_RNK
                  else
                   0
                end
                ) yrrk
 from class_fact f,
method_dim   t
where t.method_key = f.class_key

I can do stupid mistake but kindly suggest me.

Thank you

Why you have removed the bottom two filters in the second query?

AND F.DE='H'
AND F.Date between '20120101' and '20120631'

CASE filter your data. USED in your SELECTION list will be only to manipulate these data for the particular column.
You must keep your filter because it is, if you expect the reords even to return

Your request must therefore

select t.student_nm,
(case when trim(upper(F.date)) between '20120101' and '20120631' and trim(upper(F.DE)) = 'H' then
                   F.Exam_RNK
                  else
                   0
                end
                ) yrrk
 from class_fact f,
method_dim   t
where t.method_key = f.class_key
AND F.DE='H'
AND F.Date between '20120101' and '20120631'

Published by: JAC on October 12, 2012 19:08
1. is it a running query? You use DATE as column name?
2. why you store data to date as strings?

Understand the CASE statement

I got confused on this CASE
(1) SELECT BOX WHEN 111 = "111" THEN 'YES' ELSE ' ' END OF THE DOUBLE - YES
(2) SELECT CASE WHEN COALESCE (111 111) DOESN'T = "111" THEN 'YES' ELSE ' ' END OF THE DOUBLE - YES
(3) SELECT CASE WHEN COALESCE (111, '111') = '111' THEN 'YES' IS ' ' END OF THE DOUBLE
ORA-00932: inconsistent data types: expected NUMBER obtained TANK
What exactly the things happening between 2 & 3. ' nt it implicitly convert as case 2 is because that in case 3, the first value is anyway not null as CAS2... This leads to confusion.
I have read the Oracle documentation and there is an implicit data type conversion table. It also indicates that can be converted. There is always some confusion raised. Anyone could wrap this confusion?

No, the function coalesce requires that all entries to be of the same data type because they are arguments of this function.

Conversion of implicit data type occurs generally when things are compared with operators (as you do in examples 1 and 2.

There is not many functions/procedures of this nature that the mixed data types and convert them for you.

So, it is nothing to do with the CASE statements, it's in with him COALESCE function. It is overloaded for particular data types, but it requires all arguments to be of the same data type.

Problem of the CASE statement
Hi all

I need to replace the value selected,

Here's the query... make a mistake... make me ORA-00923: KEYWORD not found or provided.

Could you please correct me.

SELECT sper.assettxt =
CASE
WHEN (select description of flv fnd_lookup_values where flv.lookup_type = 'ZZCUS_SPER_ASSET_CODES'
and flv.description = sper.assettxt);
(select the meaning of flv fnd_lookup_values where flv.lookup_type = 'ZZCUS_SPER_ASSET_CODES'
and flv.description = sper.assettxt)
NVL (resp_cat. (Text, 'Total');
NVL (SUM (DECODE (sper.author_create_ta_interval,' < = 24 h, sper.total, 0)), 0) day1.
NVL (SUM (DECODE (sper.author_create_ta_interval,' < = 48 but > 24', sper.total, 0)), 0) day2.
NVL (SUM (DECODE (sper.author_create_ta_interval,' < = 72 but > 48', sper.total, 0)), 0) day 3,.
NVL (SUM (DECODE (sper.author_create_ta_interval,' > 72 h, sper.total, 0)), 0) day4.
NVL (SUM (DECODE (sper.author_create_ta_interval, "N/a", sper.total, 0)), 0) 'open ',.
NVL (SUM (sper.total), 0) "Grand Total".
(SELECT "point proven" TEXT data)
OF THE DOUBLE
UNION
SELECT "data updated item.
OF THE DOUBLE
UNION
SELECT "other answers.
Resp_cat FROM DUAL)
LEFT OUTER JOIN
(SELECT assettxt,
s.sper_status_text,
s.author_create_ta_interval,
Total COUNT (*)
OF s zzcus.zzcus_sper_data
WHERE 1 = 1
AND s.sper_dates =: P_SR_DATES
AND s.sper_month = substr(:P_SR_DATES,5,2)
AND s.customer_id =: P_CUSTOMER_ID
- AND s.task_inquiry_type AS ' descriptive data Challenge %.
AND s.assettxt <>'! MAD
S.assettxt, s.sper_status_text, s.author_create_ta_interval)
SPER partition by (SPER. ASSETTXT)
((CASE
WHEN sper.sper_status_text = "data confirmed."
THEN
"Question confirmed the data.
WHEN sper.sper_status_text = "updating data"
THEN
"Item updated data.
ON THE OTHER
"Other answers.
END) = resp_cat.text)
GROUP BY ROLLUP (resp_cat.text), sper.assettxt
ORDER BY sper.assettxt, (CASE resp_cat.text
WHEN 'confirmed data element' THEN 1
WHEN 'updated data element' THEN 2
WHEN "Others" THEN 3
END)

I need to replace sper.assettxt with the meaning of fnd_lookup_values table.

-
Well, it is interpretation since I'm guessing by your intention with the CASE statement.

Do you mean
```
CASE
WHEN EXISTS
   (
      SELECT
         description
      FROM
         fnd_lookup_values flv
      WHERE
         flv.lookup_type  ='ZZCUS_SPER_ASSET_CODES'
      AND flv.description =sper.assettxt
   )
   THEN
   (
      SELECT
         meaning
      FROM
         fnd_lookup_values flv
      WHERE
         flv.lookup_type  ='ZZCUS_SPER_ASSET_CODES'
      AND flv.description =sper.assettxt
   )
END, 
```
If yes then it is much better represented as
```
   (
      SELECT
         meaning
      FROM
         fnd_lookup_values flv
      WHERE
         flv.lookup_type  ='ZZCUS_SPER_ASSET_CODES'
      AND flv.description =sper.assettxt
   )
```
Assuming that the code returns 0 - 1 line (no more and you will get an error).

With the help of strings concatenated in the Structure of the case

Similar Questions

Maybe you are looking for