With the help of TC as a bridge between the Linksys router. TC will be connected by a cable ethernet to another building. Will this work? Help.
Need to get wireless to my workshop about 70 feet from the House. Linksys router connect to the Hughes Net modem uses. I have a new time Capsule I would like to set up in the workshop. I have an ethernet cable from my house to the workshop. (Had bad lighting storm last week and knocked out two Linksys routers. TVs all otherwise not serious! Need help, TC inlays.
Connect the ethernet to the WAN port on the TC and just run the configuration wizard utility airport... it should automatically configure the TC correctly... Have you already tried that and it didn't... If so the TC attached as well during the storm because it can damage the ethernet ports.
Tags: Wireless
Similar Questions
-
Improved the old Linksys G series to new router Netgear N600 - now can't connect wireless or directly with the ethernet cable. Status shows: "acquiring network address" or "little or no conectivity. Worked through all the options of repairing typical network with no luck. Also reset router, I tried direct cable modem & shows 'connected icon' but still does not connect to IE. Another new computer with Windows 7 works great on this network. What is my next step to repair?
Use a static IP address and see what happens.
How can I configure my static IP address?
http://ask-Leo.com/how_do_i_configure_my_static_ip_address.html -
Satellite L750 - if I use the recovery disc HARD Will this work?
Guy Alrights
I have a L750 machine that gives me problems at the moment, so I'm going back to Strath, as when I brought brand new... So I wonder if I use HARD drive recovery which will be re install windows and all the drivers and all the pre install software? Or what will be installed?
Hello
HARD drive recovery would fix the laptop back to factory settings.
Recovery of HARD drive installs the image of Toshiba. Toshiba is a package that contains the system Windows, drivers and tools and utilities.But I read the other thread you created here, and it seems you did a clean installation
In this case the HARD disk recovery would not work more :( -
Under Vista 64 HP wants to set up the Linksys router instead of simply connecting
Whenever I try to connect to a Linksys WRT54G wireless router, Vista wants to configure the router. The router is set up and working before I had to reinstall Vista due to a bad hard drive. How do I just connect?
Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
Troubleshoot network adapter problems to Microsoft link above.
See you soon.
Mick Murphy - Microsoft partner
-
My grandson was playing with the keyboard and all my icons and web pages are now huge. I had this happen before, but I can't remember how to reset it. Any help? I went through properties and all that it is fine. It has something to do with the keyboard and an F key and control or ALT.
Hi Sashaxwp,
To get small icons in your Start menu
Ensure that the selected option of Start Menu as ist and click Customize to the right of the Start Menu option.
This will display the Customize Start Menu dialog box.
Use the Option Select an icon of Sice to Programms and now select small iconsTo configure your display appearance, wants to get small icons on your desktop
Right click on an open area of the desktop and select Properties.
Click the appearance tab.
Click on 'effects' (in my Version of XP in German), perhaps you will need to click on Advanced.In my XP there is a "huge symbols" choice, if you have this choice, remove the hook.
Good luck and have a nice day!
Kind regards
Rainer
-
I tried to download it on my new computer with the disc and it will not be activated. He says it's in my downloaded material, but it is not open! Help!
Anna,
It can be a challenge to install CS3 on a newer computer because it was designed for use on Microsoft Windows XP and Vista 32-bit operating systems. You can check this link to check systems, it is designed to work:
System requirements | CS3 product points.
Guinot
-
Hello, im a student in England, student of architecture. I have the pack student for 12 months and I really need to know my limits with the use, (copyright licensing). I am allowed, except by using my home application to show works which I have already done (as portfolios) to architectural firms, I intend to request a placement to? also can I post my stuff (already did the work) on my blog or tumblr? I intend not to use for profit/money at all well (if I was I wouldn't ask you this lol). Thank you.
Hi,
Please see Licensing FAQ: where can I find the terms of membership and the terms of use?
Hope that helps!
Kind regards
Sheena
-
I have been hacked and you will have to reset my PC to factory setting and reinstall everything. To get my Adobe Lightroom rear 6 where she was re - download the software and then Exchange with my current backup catalog catalog. Will this work? -What I else I need / have to do?
Yep, it shud work.
https://helpx.Adobe.com/Lightroom/help/import-photos-various-sources.html
Restore a backup catalog
- Choose file > open catalog.
- Navigate to the location of your backup catalog file.
- Select the backup the .lrcat file and click Open.
- (Optional) Copy the catalog to the location of the original catalogue to replace.
-
Hello, please tell me, if iphone purchased at the Canada without a contract with the mobile operator, it will be subject to safeguards in Russia
You have the latest version of iOS installed and if you use not updated the software on the phone (jailbreak), the phone can't be hacked.
-
E3000 won't handshake with the edge router
Recently, I bought new E3000. I place the E3000 with edge router static IP address rather DCHP which seemed failing at the same IP address and DNS. Associated with the E3000 laptops have their own IP which differ from the IP address of the border router. E3000 is configured with firewall No. minimum protection, for now. The reason for a minimum protection was to get the handshake between the two routers. The border router is a product of Verizon. The old router I was using is a Netgear who did the handshake with the edge router. I have the latest firmware for the E3000 version of the Firmware: 1.0.04)is build 6. Router will not handshake with wired connections or wireless. Used to connect to the E3000 laptop is running Windows 7 Ultimate. In fact, all laptops here use the same OS and connect wirelessly. I've tried the package of software provided on the site, which housed a diagnosis that apparently could not solve the problem as well. I have not idea about why E3000 not handshake with the edge router. Can we make a few suggestions. Thank you to all those who respond.
What is the IP address of the router Verizon? What you write suggests that the Verizon router uses 192.168.1.1. If this is the case, establish the E3000 as a switch simple ethernet access point as follows:
1. disconnect the E3000 from the Verizon router.
2 wire a single computer in the E3000.
3. open the web interface at http://192.168.1.1/ (or whatever the IP address you put it now).
4. on the main configuration page, make sure that your type of internet connection is on "auto/DHCP.
5. on the same page, set the LAN IP address to 192.168.1.2.
6. on the same page, disable the DHCP server.
7. save the settings.
8 unplug the computer and one of the LAN ports numbered from the E3000 wireless to your router to Verizon.That's all. Now, you can use the E3000 as access point and you can use the remaining 3 LAN ports for wired devices.
-
The upgrade of the database of hotmail is the reason for my personal hotmail account info. With the termination of my account within 48 hours if I don't respect. Is this a legitimate message from microsoft?
Hello
It's an old scam
I would say that you have been scammed if you had provided this information
never give out personal information that can lead to identity theft
If you ever have questions of hotmail use the link below to access hotmail forums
Portal hotmail at the link below
-
My University provides all students with the cloud of Adobe for their PC. I downloaded and exchanged a code for this, but it only gave me the trial versions of each product. How can I get full versions, since I already seemingly bought my designated code?
I recommend you to contact our customer service for more assistance. Contact the customer service
I wrote you a personal message, please check.
Kind regards
Bani
-
13 elements will not work with the new camera, it will not be updated raw 8.7.1
13 elements will not work with the new camera, it will not be updated raw 8.7.1. I downloaded the patch, installed, but the old version is it in elements. Thank you, esther
Try again a little later. Sometimes the Adobe servers are busy. If you get the same answer, you may need to uninstall and reinstall. Try an alternative link, then confirm with your 24-digit serial number - click here to download PES
-
WRT310N access to wireless hooked up in tandem with the modem router cable
I have a Linksys cable modem set up and hanging the WRT310N to it. I am able to access the internet via the wireless router, but I can't seem to access web access the router. I want to update the firmware on the WRT310N, but I can't access the admin page. What should I do?
Thank you
Gary
You have a MACBook, you need to wire your MACBook to your Linksys router, and then click the Apple Menu on the top Leftside, click System Preferences, then click Network, then select built in Ethernet and there you will find the IP address that you get your wireless router, note down the default gateway After that open to the top of your Safari browser and the bad address Type that numbers a default gateway and press ENTER, when you are prompted for the user name and Word of past, let the emptiness of username and the password typed "admin" all lowercase and after that, you will see the page of the linksys router configuration.
-
How to access internet throug a firewall of the Linksys router?
Recently, I went to the ADSL2 + Internet broadband.
So bought router "CISCO Linksys WAG120N" as my hardware firewall (FortiGate60) had no any port to connect to ADSL.
Now I am accessing internet throug the Linksys router above and do not use the firewall because I don't know how to configure the firewall to get access to the internet through the firewall of the router.
My previous broadband service was directly connected to the WAN port on the firewall because it was compatible.
Please help me to configure the firewall to access the internet from the router through the firewall.
Thank you
You must configure the WAG120N in Bridge mode and then configure your firewall to your (probably PPPoE) internet connection.
Maybe you are looking for
-
Satellite A200 - 28 p - need info on hard drive RPM
I don't seem to be able to find information on the number of REVOLUTIONS of the disc hard 200 GB what in the Toshiba Satellite A200 - 28 p, which I think to buy.What is 5400 RPM? Any help much appreciated.
-
Error Code 0xC00CE56D the Config parser error
I get this error error Framework/v.1.1.4322/config/machine.config of C:/Windows/Microsoft.Net Analyzer Config parser returned the error of analysis 0XC00CE56D it comes from start to appear? What are my corrections?
-
Display card/video card does not support DirectX
First of all, I thank you in advance for any help I receive... When running a game program, on occasion, the program is interrupted by a blue screen with a message something very long fault and then my computer shuts down. When I reboot, I get the er
-
I bought the laptop in 2006. The windows is genuine, but I don't have the activation code. What should I do? I installed vista and because I had no code after about 4 weeks it will stop. I'm up, but its prompting me to activate again. Help, please! T
-
How to program Windows Live Sync to run at a specific time?
I am trying to program Windos Live Sync to start and stop at certain specific times. I tried with the Task Scheduler"of Windows Vista, but it not start when I expected. Any suggestions? Thanks in advance!