With the help of transmitter USB for keyboard and wireless mouse 3000 in Vista

a friend already has the Wireless Mobile Mouse 3000

and just purchased the Wireless Keyboard 3000 .

They both work w / USB 2.4 GHz transceivers, and they do not work OK using both of the receivers that accompanies the individual purchases.

I was wondering if it is possible to use a single USB transceiver for both devices instead of two... hoped that this would be the case because they are the two series "3000" operating in the same band.

Some hoped it would all just automatically connect, but no luck.  I can force it to use a two-way radio?

Thanks for any help / suggestions

* original title - use Transceiver even for (2.4 GHz) wireless KB & mouse that were purchased separately? *

Hi moonstruck67,

We cannot have the same transmitter/receiver for two wireless devices because it is not supported.

You need to do the same with wireless Bluetooth technology.

However, if you want to force the installation, try the following steps:

i. Click Start

II. Type in devices and printers

III. right-click on the transmitter/receiver

IV. If you have the opportunity to connect or sweeping, try the option and check if that helps.

Link, please refer to:http://www.microsoft.com/hardware/mouseandkeyboard/features/bluetooth.mspx

With regard to:

Samhrutha G S - Microsoft technical support.

Visit ourMicrosoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Where can I get a transmitter replacement of conection usb for keyboard Microsoft Wireless Comfort 1. 0 has (1027)

    Where can I get a transmitter replacement of conection usb for keyboard Microsoft Wireless Comfort 1. 0 has (1027)

    Skype id: andrewgranville

    E-mail address is removed from the privacy *.

    Hi André,.

    Good to know that you were able to resolve the issue and thank you for sharing information.

  • Problem of password; I tried to log in with the password that I had for years and now it says its wrong.

    I tried to log in with the password that I had for years and now it says its wrong. I have reset the password without the disc? I am trying to renew new internet protection and it wont let me because I need to approve it.

    Thank you

    If you want to tell your Windows 7 user password, see guide to recovering lost passwords or other defects preventing log on Windows 7 Home Premium

  • using the KDL-46W700 how to connect to the wireless keyboard and wireless mouse

    Hello

    I use KDL-46W700 how to connect to the wireless keyboard and wireless mouse

    Unfortunately, you can not connect a keyboard wirelessly on your TV. Your TV will need a driver for this. Sad thing, it's impossible to install anything on the tv, which includes the driver for the external devices such as a wireless (except USB) keyboard... I recommend the SIDEVIEW TV application that has the remote control / function keyboard and mouse... this app is free and can be downloaded via Google Playstore... ^^.

  • My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse.

    My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.

    have you tried to change the batteries in the mouse?

  • installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

    installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

    Wired or wireless - is usually not serious unless the wireless can get more interference.  If the keyboard is close to the receiver which is connected to the computer and you get the strikes hurt - my suggestion is to try first the keyboard on another computer.

    To do this, * not * require you to install specific drivers.  Simply unplug the combo of a computer and in the other and see if the keyboard works correctly.  Then, you can troubleshoot from there.

  • With the help of large paintings for a random word generator

    Hello

    I am currently working on a random word generator quiz this kind of thing, you press a button (click/touch) and a random word appears, you must then click/touch again to choose that if you think it's a real word or a compound word, whenever you get a right you get a point. No problems so far, I have all this works with the help of a few global variables (eep) and a couple of berries that store the image names and the true/false values so that they are real or not.

    Now that I'm starting to fill the building with the final content I am realizing that the table of the image is going to be huge, some 250 more entries and currently he is sitting on an action to click the button. Is it the right way to go about this or is there a better way to store the information about all? In a text or .js file maybe?

    All boards that much appreciated, thanks for reading!

    Hi spiders.

    If you push 200 objects a picture, you probably want to use a loop "for".

    Alternatively, if you load an image at random, and they are all named in the order, you can try something like this:

    wordCount var = 200;

    var imageIDToLoad = Math.floor (Math.random () * wordCount); / / Choose random num

    Substring var = ' images/word'+imageIDToLoad+'.png';// added this var to work around quotes

    var imageURL = "url (" + subString +")"; / / create the URL based on the random ID num and substring

    var randomWord = sym.createChildSymbol (imageURL, "wordWrapper");

  • With the help of creative cloud for teams on the internet workstations not

    Hi people,

    Am interested in creative cloud on workstations that do not have access to the internet.

    It's because of problems of security and Non-disclosure agreements.

    Internet is only enabled by ICT admin for activation.

    Is there a manual procedure to validate the software on a machine with provided admin Internet before the 30 days have passed?

    Kind regards

    AC_ICT

    In a broadcast environment where all of our edit bays are behind the firewall offline.  I installed all of our seats of the CC team and have to take them online every 90 to 120 days or when updates are needed. All users see the countdown of the license are invited to contact HER and I take the machine manually, online check for updates and which seems to give CC Aps enough time to touch base with the license server. Take users off connection and return the firewall until the next countdown begins.  Rinse, repeat if necessary. This is the manual way, otherwise you must set up an Adobe license or update server behind your firewall that you then deploy updates as needed.

    Andy

  • Keyboard and wireless mouse is not matching

    I just updated my iMac to El Capitan, but my wireless keyboard or wireless mouse are recognized and will not pair with the computer.  I put in new batteries but still not working. Any thoughts? Thank you!

    Try to go to your system preferences > Bluetooth and remove them and then re-add-the.

    First read this Apple Knowledge Base article

    OS X El Capitan: pair a keyboard Apple wireless, mouse or trackpad with your Mac

  • Hi, any suggestions with the help of an ipad for a Dyslexic user?

    Hi, does anyone have suggestions for a severe Dyslexic how to use an ipad? Thank you

    There are a few applications, you may want to research.

    Learn to read, write and spell - free

    Compatible with the iPad. Requires iOS 4.3 or later.

    This app teaches advanced reading and spelling skills to children and adults who are fighting in these areas.

    https://iTunes.Apple.com/us/app/learn-to-read-write-and-spell/id658169485?LS=1 & t = 8 m

    Make sentences - free

    Compatible with iPhone, iPad and iPod touch. Requires iOS 4.3 or later. This application is optimized for the iPhone 5. Also compatible with Android 2.2 devices and up.

    This app teaches kids how to form simple sentences in a series of scattered words.

    https://iTunes.Apple.com/us/app/make-sentences/id587265511?Mt=8

    ER browser - $0.99

    Compatible with iPhone, iPad and iPod touch. Requires iOS 7.1 or later version. This application is optimized for the iPhone 5.

    This app is a web browser that allows the user to change the style of the web pages to make them easier to read. The user can change the background color, fonts, text size and more.

    https://iTunes.Apple.com/app/er-browser/id552868366

    Sam Reading Series - free spy

    Compatible with the iPad. Requires iOS version 7.0 or later.

    Created by a doctor to help his son learn to read, this multi-livre adventure begins with a few simple words on each page. Gradually, the façade of the simplistic caricature fall field show a reflection that defends the loyalty and determination. You can also download books 2 and 3.

    http://iTunes.Apple.com/us/app/spy-Sam-reading-book-1-big/id644904139

  • With the help of Yosemite 10.10.5 and safari will not leave for me to restart. Have you tried all the option force quit I know? Any suggestions?

    I can't open or close safari when I try to quit he said its opening, but when I try to use it - it is not opening or answer. Safari is not rich in the dock as it should be when opened can not restart normally as safari is open. Force quit won't go beyond that. I'm stuck. Help!

    If forced to leave in the Apple menu doesn't do nothing I guess you will have to hard reboot: press and hold the power switch up to the farm of Mac down, gives him a minute or two for the disc to spin down and then starts normally with the power button.

    Do you think day as Backup just in case the problem is a sign of something bigger than just a glitch in Safari?

  • With the help of digital input for Boolean control?

    Hello!

    I have spent a lot of time to search but have not found a solution to this...

    I have LV 2015 with chassis NI 9188 and module NI 9425 DI.  Try to use the input signal to assign a State structure machine program and/or events in real time.  It would be acceptable to have an indicator show the status of the input line, since I can use it elsewhere with Value (Signaling).

    Please do not ask for the code - the problem is quite simple.  I just want to use the digital inputs to program control as a T/F.  I want just the program to analyze the State of the input and decisions - a bit like a PLC.

    All I seem to be able to extract is data of digital waveforms with a task DAQmx.

    It's not a trigger - I already use a trigger to start the analog acquisition.

    Formulate the problem in a simpler way...  What to do if you had a digital input module and you wanted to see the status of each input line in the form of a LED on your face in real time.  How would you do it?

    I really appreciate the help!

    greyhorn23 wrote:

    Formulate the problem in a simpler way...  What to do if you had a digital input module and you wanted to see the status of each input line in the form of a LED on your face in real time.  How would you do it?

    I would like to write what has been read to the Terminal.

    From what I can tell, you want to just read a single static value from your digital line.  You can then simply read the value of one and do some logic with her.

  • With the help of app.executeCommand () for the new solid dialog box

    Hello

    I write a little shell script for AE CS5 user and I want to call the dialog box new solid with the app.executeCommand () function.

    Currently I find the command ID using the line of code:

    app.executeCommand (app.findMenuCommandId ("Solid..."));


    However the dialog box, I am presented with doesn't offer not the button make Comp size (it is grayed out) and the resulting solid is not inserted in the open model. On investigation I realized that it was because there are two menu options 'Solid. '... "and it evaluates first of all that bad (file-> import-> Solid...)

    Does anyone know the command ID correct for the layer-> new-> solid...?

    I would prefer not to have to build dialog of myself if I can help it!

    Thank you

    Christian

    PS Adobe guys - I know that this command is not supported, but I would be grateful if you could shed some light on this topic in any case!

    Hi Christian,

    Try using the command ID 2038 for new Solid.

    See you soon,.

    Zac

  • With the help of IVI driver for delay in the MSO6104A of reading

    Hello

    I have the IVI driver NOR for the scope of the MSO6104A. The driver is functional, and I managed to use it.

    My scope has a function of delay between two different channels. But, how to read delay help scope step IVI measurement?

    Is there another way to read this measure?

    Thanking in advance

    As far as I know, without delay only is not supported a measure of IVI function. For example, you can complain to ivifoundation.org first. Or, in a code module, you can use the driver of specific instruments for the measurement. This would make the application "no - IVI" so in the first place, most of the grounds using IVI disappeared. Or retrieve the waveforms from each channel and calculate the delay in a code module.

  • With the help of paper painted for other purposes

    I have created a slideshow to send to a friend, using a few photos that I downloaded as wallpapers to the site. Recently, I realized that the photos are copyrighted.

    I didn't intend to sell the slide show or distribute in any way, except to my friend. Is this allowed?

    Thank you!

    Copyrighted materials can be used if you don't earn profits, if it's just for personal use to look at the pictures or do it in circles it is protected under the fair use Act. Given that you do not sell the photos him nor makes it sound like it he uses a product to sell should be no problem with the material to share with friends.

Maybe you are looking for