With the help of vector graphics with fxml and JavaFX

Similar Questions

• With the help of vector files in AEFX

  I need to inform a graphic designer on a project that is formed in AEFX.

  Camera titles via a bar code to reveal a scene.  Simple.  Basically, follow in, then through a white bar and dissolve through the scene

  I was wondering if the barcode was created in the form of layers in a vector format... If that would be better than a massive psd file.

  AEFX works even with vector files?

  Assumeably need rasterising at some point.

  Grateful for all the thoughts and ideas in this regard.

  Create the file in Illustrator and then select continuously rasterize.

• With the help of Yosemite 10.10.5 and safari will not leave for me to restart. Have you tried all the option force quit I know? Any suggestions?

  I can't open or close safari when I try to quit he said its opening, but when I try to use it - it is not opening or answer. Safari is not rich in the dock as it should be when opened can not restart normally as safari is open. Force quit won't go beyond that. I'm stuck. Help!

  If forced to leave in the Apple menu doesn't do nothing I guess you will have to hard reboot: press and hold the power switch up to the farm of Mac down, gives him a minute or two for the disc to spin down and then starts normally with the power button.

  Do you think day as Backup just in case the problem is a sign of something bigger than just a glitch in Safari?

• With the help of transmitter USB for keyboard and wireless mouse 3000 in Vista

  a friend already has the Wireless Mobile Mouse 3000

  and just purchased the Wireless Keyboard 3000 .

  They both work w / USB 2.4 GHz transceivers, and they do not work OK using both of the receivers that accompanies the individual purchases.

  I was wondering if it is possible to use a single USB transceiver for both devices instead of two... hoped that this would be the case because they are the two series "3000" operating in the same band.

  Some hoped it would all just automatically connect, but no luck.  I can force it to use a two-way radio?

  Thanks for any help / suggestions

  * original title - use Transceiver even for (2.4 GHz) wireless KB & mouse that were purchased separately? *

  Hi moonstruck67,

  We cannot have the same transmitter/receiver for two wireless devices because it is not supported.

  You need to do the same with wireless Bluetooth technology.

  However, if you want to force the installation, try the following steps:

  i. Click Start

  II. Type in devices and printers

  III. right-click on the transmitter/receiver

  IV. If you have the opportunity to connect or sweeping, try the option and check if that helps.

  Link, please refer to:http://www.microsoft.com/hardware/mouseandkeyboard/features/bluetooth.mspx

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• With the help of a PIX501 to secure and share an internet connection by cable

  Hi all

  I bought a PIX501 to secure my home cable modem connection and share it around my house. The PIX will act as a DHCP client (my ISP uses dynamic IP addressing) and use nat and DHCP break with my small number of inside customers.

  The default setting (set using the set up of PIX) seems ok - but I did a little "do-it-yourself" after some negative PIX customers I've read here in the United Kingdom.

  Specifically, I: -.

  -A refused requests incoming icmp (to make the "invisible" PIX to the outside world)

  -Created an access list to allow answers to my outgoing ping (something every geek network must be able to do)

  -The value "string fragment 1 outside" to drop incoming fragmented packets

  -Limit the number of connections to 200 and embroyonic at 50

  -Activated floodguard (although I don't think this should be necessary on such a lightly loaded network)

  -Compatible console logging so I have at least a bit of history of all attacks

  -Reduced some of the delays of the connection of their default values

  As I have a relatively new to this kind of thing anyone have specific advice or tips for a pix used this way?

  Thanks in advance,

  Andrew.

  When you work with ICMP, remember that [icmp] command to assign ICMP messages for the pix as the host, while the [access-list] command is used to assign ICMP messages that pass through the Pix.

  If you are using IPSec tunnels through the Pix, you can consider letting in string fragment of 2 sizes. IPSec creates broad enough to cause a lot of packets to be fragmented. Path MTU discovery would prevent, but many networks prevent incoming requests that allow the discovery to work. For this same reason, you can also consider allowing the Pix to get unreachable inside your host name if you the Pix end VPN tunnels. [icmp outside any unreachable towing]

  Floodguard is enabled by default and does not need to be enabled. It should not be necessary on a little loaded network, but it would be necessary at the time of a DoS attack if you are Pix does authentication "uauth" of traffic entering or leaving the network.

  If you are interested, the Pix can authenticate users inside before allowing the traffic leaving using RADIUS. This is useful in situations like a web server inside is attacked from outside. By the application of authentication for other traffic to leave for offending guests options are very limited. A timeout is used to trigger authentication again after some time. The [floodguard] is used to protect this feature "uauth' of the Pix.

  The Pix has signatures VERY BASIC integrated IDS that you can activate by using the set of commands [assessment of intellectual property].

  Enable SSH for authentication and encryption by generating an RSA key and saving it to Flash. [AC product key 1024 rsa] and [ca save all] disable telnet by removing all orders [telnet] and replace them with [ssh]. [http] should also be limited as much as possible for the administration.

• With the help of a mixed environment Winsows and Mac

  I have a creative cloud subscription, and I use it on a MacPro and MacBook Pro. I want to use only hearing or Indesign on a Windows 8.1 system, since this system has several 4K screens. Is that possible without turning off all the components of the CC on one of the Macs and can enable CC on one Mac once again when I finished on the Windows system? In other words, is the CC license a floating license that records using active CC on systems?

  Yes.  You should be able to connect on a system and use no matter what you prefer applications.  You can be signed in on 2 systems simultaneously, with an option to reset all of the activations if you need to connect to a third-party system do not have access to others for now.

• With the help of Windows Vista Edition family and unable to connect to the Netgear router.

  No matter what patches I try, I still, I get a message error "settings saved on this computer for the network do not match the requirements of the network. Two other latops under Xp and Windows 7 connect perfectly.  The user called Geeksquad who told him it was the router. Replaced the router and the same issue. This default laptopp local only access point. Fix regedit for broadcast and Fixit file downloaded here have not solved the problem. Have you tried to push the direct connection button on the router, change the network connections settings... everything. Nothing works. Help, please! The user of this laptop is uber frustrated. I don't know what else to do.

  Geek Squad - use if you do not want necessarily fixed it - but you like overspending for no reason.

  Sounds like a bad driver/software.

  What is the wireless network device in the system in question (I hope that something like Intel...?)

  Is the latest software and drivers from the manufacturer of the device (don't not relying on Microsoft)?

  May need to remove all network components, reset it and install the latest drivers - and if you think Geek Squad would do that...  They could - if you get a child who loves really networking of their own things at home - but the odds are against it.

• With the help of test even contained main and test-out option

  First Captivate doesn't let me use the same test in the test-out section and in the main content section. I tried to rename the test 9 Captivate and download the renowned test but CP said that I had already downloaded the test. How can I use the same test in the two sections?

  Hi Helen,

  We are aware of the issue of Cp and to work fixing it. At the same time, as a work-around, you can publish your project on computer and the first browser upload. Then download the same file again, like any other module. After that, you can add a Test module and a module in the "content" section.

  Hope this will help you.

  Kind regards

  RUCHI Roulin

• With the help of professionals to win 7 and win xp virtual my cahged screen. How to return to the original screen?

  When I started my screen today using win 7 professional and win xp virtual mode my screen changed colors and icons display in different colors. How can I change the original settings screen?

  Hello

  Thank you for contacting Microsoft Community.

  Go to control panel-> display control-> in the left pane, click screen resolution.  Now, Act resolution and change to a lower value, click on apply. Yet once, after a few seconds, change back to the normal resolution / by default, click on apply. It will be corrected.

• With the help of APEX_JSON translated by JavaScript and escape the quotes

  I am currently generation JSON using the APEX_JSON package.  It works fine, but I got out the JavaScript code on the loading of the page and can not find a way to escape the double quotes.

  function drawChart() {
  
  
          var jsonData = &P9_JSON.;
  
  
          var data = google.visualization.DataTable(jsonData);
  
  
          var options = {
            title: 'Test Chart',
            pieSliceText: 'value'
          };
  
  
          var chart = new google.visualization.PieChart(document.getElementById('piechart'));
  
  
          chart.draw(data, options);
        }
  

  I'm getting errors because "is replaced by & quot;" in the javascript code generated.  Any ideas how to replace these?  I tried to use to replace them, but it doesn't seem to work...

  Thank you!

  Hi LSDev

  Replace this line--> var jsonData = & P9_JSON. ;

  To--> var jsonData = & P9_JSON! RAW. ;

  This work for me...

  Best regards

  Eduardo

• With the help of a button to load and unload the external SWF in AS3?

  How can I use a button to load and unload a sequence of external SWF files, as a Next button and previous?

  I don't know if it will work because apparently you are trying to load a swf AS1/2, but try

  change the line to be...

  _swfTempClip = MovieClip (event.target.content);

  If this does not work, then you will need to create _swfTempClip as a new MovieClip and add the event.target.content to this MovieClip using addChild().

• With the help of Photoshop CS5 64-bit and use raw images from Canon 6 d.    What I do to upgrade or is there a fix option?

  ISSA

  Read these two pages of Adobe's Web:

  Adobe Camera Raw Photoshop Lightroom compatibility troubleshooting

  Update information for older versions of Adobe Photoshop

  Upgrade to PS CC is only $9.99 per month!

• With the help of pst on kindle fire and cannot find the drawing selection tool Freehand?

  It is not available or am I just not see?

  Please see image attached:

  

  Thank you!

• The scale of the vector graphics. Can someone help me...

  Hello

  I confess that I'm not a coder. I tried to learn java script, but I think that's not in my "nature".

  If anyone can help with this one? I have a book with hundreds of vector graphics inserted (wmf and eps). When there is a change in the graphic dimension and I recreate a link to the files to update the Indesign CS5 content, the result inside the container is not updated to the real dimensions of the chart. I have to select the graphic, resize to 100% and after that I must apply "to adapt to the content of the framework. I think that it is very easy to achieve with a script. Can someone help me?

  Thanks in advance,

  Maria

  Although I don't know script and can announce that GREP, I am a student and I use it every day with great benefits...

  It is easy to script, but only for those who know how to do... InDesign would win easy to save, such as Illustrator and Photoshop Actions... No reason to worry, though. Just ask in the friendly Scripting Forum

  In addition, a good way to try complicated GREP discovered is to build using a GREP style, with a character style that applies Hot Pink pointed out Comic Sans Bold to "found" text Turn on the Preview button, write your GREP, check if it highlights everything that you want, and then copy the definition and remove the GREP style. Paste the definition into the search field and go.

  This Javascript comes in two parts: the first controls to reduce by half if you have a graphic selected with the black arrow (a normal selection). If so, this single chart is resized and mounted. Otherwise, it scans all the graphics of the document as a whole and apply controls to all the graphics. If you think it's a little too much, do not include the 2nd halve of the script, everything after the line "eventually."

  Copy what you need, paste it into the Adobe ESTK editor and save in your Script file as "resizeGraphic.jsx". Select an image and double-click the script, or otherwise, do not select a single chart and run it to resize / refit everything. (But only if you dare).

  If you need isn't a lot, don't forget that you can add a shortcut to the script with the command editor keyboard; It automatically shows you in the "Scripts" section in there.

  //DESCRIPTION:Size to 100% and Fit to Frame for selected image
  if (app.selection.length == 1 && app.selection[0].hasOwnProperty("graphics") && app.selection[0].graphics.length == 1)
  {
       app.selection[0].graphics[0].absoluteHorizontalScale = app.selection[0].graphics[0].absoluteVerticalScale = 100;
       app.selection[0].fit (FitOptions.FRAME_TO_CONTENT);
  }
  
  // OPTIONALLY!
  else
  {
       g = app.activeDocument.allGraphics;
  
       for (i=0; i		   

• Creating UI with FXML

  I am new JavaFx and looked for some documents for the creation of the user interface using fxml. But after an exhaustive search, I did find a few examples of fxml like the one below. Is there documentation for the FXML elements and how to use them.
  
  Grateful if you could transmit a few references to the materials. In addition, any suggestions for books on fxml and javafx.
  
  Thank you.
  
  
  <? import java.lang. *? >
  <? import java.util? >
  <? import javafx.collections. *? >
  <? import javafx.scene. *? >
  <? import javafx.scene.control. *? >
  <? import javafx.scene.layout. *? >
  <? import javafx.scene.paint. *? >
  <? import javafx.scene.text. *? >
  
  < StackPane fx:controller = "demo. LoginController"id ="Login"xmlns:fx ="http://javafx.com/fxml">
  < children >
  < AnchorPane >
  <!-keeps AnchorPane and it has max = pref. This causes her Center in StackPane->
  < maxWidth > < Double fx: value = "-Infinity" / > < / maxWidth >
  < maxHeight > < Double fx: value = "-Infinity" / > < / maxHeight >
  < children >
  < layoutX TextField = "68.0" on = "58.0" prefWidth = "126.0" fx:id = "userId" onAction = "#processLogin" / >
  < PasswordField layoutX = we "327.0" = "58.0" prefWidth = "126.0" fx:id = "password" onAction = "#processLogin" / >
  < layoutX label = "229.0" on = "61.0" text = "" password: "/ >"
  < layoutX label = "16.0" on = "61.0" text = "" user: "/ >"
  < button layoutX = we "200,0" = "125.0" text = "login" defaultButton = "true" fx:id = "login" onAction = "#processLogin" / >
  < layoutX label = '80.0' on = "200,0" textFill = "RED" fx:id = "errorMessage" / >
  < / children >
  Properties of <>
  < backgroundColor >
  < color blue = "1.0" green = "1.0" red = "1.0" / >
  < / backgroundColor >
  < elementLockSel >
  < fx: value Boolean = "true" / >
  < / elementLockSel >
  < / properties >
  < / AnchorPane >
  < / children >
  < styleClass >
  < string fx: value = "user name" / >
  < / styleClass >
  < / StackPane >

  Have you ever read?

  http://docs.Oracle.com/JavaFX/2.0/API/JavaFX/fxml/doc-files/introduction_to_fxml.html

  Other items I found:

  http://Java.dzone.com/articles/focus-JavaFX-2-fxml-NetBeans

  http://fxexperience.com/2011/10/fxml-why-it-rocks-and-the-next-phase/

  Published by: RDarrylR on February 23, 2012 11:36