Similar Questions

• With the help of VMware CP in DMZ networks

  Hello

  I am familiar with the installation and configuration of the PC, but I have a requirement for a customer that the network consists of many DMZ networks, which are all protected by a firewall between them for safety reasons.

  Is there a way that CP can be configured for statistics before several data collectors, located within the DMZ networks to a central collector, related to the data warehouse?

  There is no way that my client can open the ports required for 'normal' data collection, and I was hoping that there would be some sort of SSL connection between the collector in the demilitarized zone and the main collector on the local network.

  The only other option would be to create a single data for each DMZ collector and record each as a separate company...

  You can do in case of problems. After you have created the company, you add can all collectors by going to the company-> save the database ID and click on the Add button. After the first synchronization, wait a few hours and create a project and associate all systems.

  I've done a few times for the same exact reason and it works fine.

  There is no built-in way to link collectors I know. I guess you could plan a robocopy to move each utbox files in a central shipping box, but it would be a pain.

  Dave

• With the help of VMWare Player in internet cafes

  I'm hoping to take a virtual machine from a development environment rudimentary vacationing European cycling for emergency repair work (SQL Server, Microsoft Access, etc.). I had intended to put the virtual machine on a S200 personal IronKey 16 GB Secure Flash Drive: https://www.ironkey.com/personal.

  I would use this VM in internet cafes. Is it possible to run the virtual machine without installing the player on PC for a coffee? For example, it is possible to rotate the player from the same flash player?

  Thank you.

  VMware Player must be properly installed on the host system. Also running the VMS in a drive USB Flash can be very slow with a lot of latency, and I wouldn't recommend well it's certainly doable.

• With the help of VMware workstation 7 on Win 7 laptop

  Hi all

  Out of curiosity, someone at - it never try to install VMware workstation on Windows 7 with 4 GB of RAM (Intel® Core™ i5 - 520 M processor (3 m Cache, 2.40 GHz)

  I intend to run SharePoint server 2010 beta on this laptop for a demo and I was wondering if it is recommended or not?

  Thank you.

  Kind regards

  AWT

  I run WS 6.5 on a laptop of recent Dell game (1 year) with 4 GB of RAM with Windows 7 64-bit. In fact, I have 4 ESX and Vcenter that run in WS 6.5 for education. You need a 64-bit version of Windows to use 3 GB or more due to limitations of 32-bit Windows.

• Publish with the help of VMware thin App

  So far, I have:

  Created a package on the deployment server

  Moved the .exe to a folder named DeployMS at the root of C:\ on this server

  Machine for the MSword.exe and created a shortcut from a XP lance Word very well.

  So now, I copied ThinReg from the server to the XP Machine deployment

  and created a file locally beats on the C:\ of the xp machine that has:

  c:\Thinreg.exe/r/a ".
  & lt; Server name & gt; \DeployedMS\MSWord\Microsoft Office Word 2003.exe

  But the word is still not save.  No shortcut in the start menu, can not open .doc to the file. ect...

  Can someone tell me please in the right direction.

  The account has access to the location of the file on the server?

• With the help of com 1

  I have VMware 7.1.6 build 744570. With the help of 'Virtual Machine Settings' and 'Add', I am able to create a serial port as "serial port 2" and "serial port 3", but I can't create port 1 (a.k.a. com1).

  Someone at - it ideas?

  By default, the tool ThinPrint VMware uses COM1.  He is the host printer can be used without having to install specific printer drivers in the comments.  I normally do not use ThinPrint so I just remove the printer settings of the virtual machine and then when I add a Serial Port, which he defined as COM1.

• With the help of ActiveSync

  I just got the Samsung Galaxy S4 and I'm looking to find an e-mail with the help of ActiveSync client; However, it is precarious with our administrators having the ability to remote wipe our personal devices. In short, with are all the other available similar policies and remote wipe sandboxed for this application? or apply to the device as a whole? There may be a white paper available to read more about this? Is there a free trial of this application to test the feature?

  Thank you

  Neil

  Hello

  The app is designed to comply with Android Device Policy Manager, so he's going to wipe the device when receiving the order of deletion from the server.

  Management of workspace on personal devices is supported in VMware Horizon Mobile products:

  http://www.VMware.com/products/desktop_virtualization/mobile/overview.html

  To the point, we don't have a free trial version.

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• With the help of iPhone 6 s. try to copy the text message with a tap double and get a bubble with icons. How can I copy the message to paste in another?

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  maryml wrote:

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  Press and hold on the text and wait for the copy/more pop up.

• With the help of Club running on the Nike watch +.

  Hello

  This is something I have tried to work for a while and have not yet been able to find an answer. At the moment I use Nike + management club on my iPhone to follow the tracks that I find that gps is better than just using the application of the workout on my watch. However, something that really bothers me is that I start the race on my phone, but I can't then view my stats while running without having to press on and tap the watch and wait for the application to load, very irritating to race. I want to be able to lift my wrist and live stats are there to watch me, not listening and not get my phone out of my pocket. Surely this is something that can make the original watch?

  As a separate issue with the new app, Nike +, it does not recognize the songs I downloaded on my phone of Apple music in my playlists, then I have to play the separatelay of music through the application of music as opposed to go with Nike +? The ides on how to fix or is this a known problem with the latest Nike + app?

  Hello

  You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:

  • Contact Nike (support is available by phone and via social media):
    • https://support-en-us.nikeplus.com/app/contact/l/4/t/4462/
  • Nike + running Club to support:
    • http://nikeplus.com/support/

  More information:

  https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8

• With the help of old gear series noon on El Capitan

  I have a Vox Tonelab SE effects audio Board (around 2004), there the old serial midi on the back ports. I hung with the help of a USB MIDI interface cable. While the USB Midi interface to the show in Audio / Midi set upward and also in the profile system for USB port it does not detect the Vox Tonelab so no communication lunch.

  There is a POWERPC application called ToneLabSE SoundEditor which I downloaded and installed in the hope he would install a driver but I guess that this obviously doesn't work on INTEL in any case. Using Wine I can run the PC version, but still no communication via midi.

  Someone at - it ideas, would like to get this Panel communicating effects via MIDI.

  Thank you

  

  

  

  Solved! Using the WINE app I've run the version of the PC of ToneLab SE editor application. So pretty unintuitively by changing the serial midi to USB, SERIAL interface cables that went to the and out on the Tonelab SE. Now of the Se ToneLab editor I can write banks of programs to hardware Tonelab, but unable to empty the banks since the material Tonelab to software. My main desire was to use Expression pedals on the Tonelab as Midi Ableton controllers and some of the switches to the control of the Looper stomp. Now I can do it all. Hooray!

• With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  Opening was a pro the Pro amateur-oriented or serious app, usually shooting Raw, probably on a digital SLR.

  If that's you then pictures will miss a lot for you.

  If this isn't the case, then opening was probably overkill for your needs.

  If you like the pictures then this is the way to go.

• Thunderbird will only connect if stop then reopened. (With the help of Mac 10.9.4)

  With the help of Mac 10.9.4
  If I open Thunderbird, I can connect to my e-mail address and download the messages. If I select "Get Mail" once again, Thunderbird crashes and fails to connect to my emails. If I then close Thunderbird and re-open it, I'm able to immediately connect to my mail.

  It seems to have sorted itself after a few days. (Fingers crossed). Until today it worked properly. Will keep an eye on things for the next week and the report does so again.

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• ow change titles & dates of lots of pictures (like in iPhoto?) With the help of Mac 'Pages' on, 2008 aluminium MacBook running OSX El Capitan 10.11.4

  How to change titles & dates of lots of pictures (like in iPhoto?) With the help of Mac 'Pages' on, 2008 aluminium MacBook running OSX El Capitan 10.11.4

  With the help of Mac 'Pages '.

  A typing mistake?

  If it is and you mean Photos Date of Mac are modified by selecting the photos using the Image menu == > adjust the time and date of order and changes made to the metadata such as keywords, location, etc. are made by selecting the photos and find the info and registering metadata in the Info window

  These are detailed in the help topics of pictures - a good place to look for help on the Photos

  View and add information about the photos

  You can view and add information about your photos. For example, you can see the date and time a photo was taken, the information about the camera that took the photo and badges that indicate the status of the photo. You can assign titles and captions to photos, add or change the location of the photos and change the date and time for them information. You can select multiple photos in an instant and add or change information about them all at once.

  Open pictures for me

  View and add information about the photos

  To view or change information for the photos, you select one or more photos, and then open the information window.

  • Open the Info window: Double-click a photo to view it, and then click the Info button in the toolbar or press on command I.
  • Add or change information: Change the following.
    • Title: Enter a name in the title field.
    • Description: In the Description field, type a caption.
    • Favorite: Click the Favorites button to mark the photo as a favorite. Click the button again to deselect.
    • Keywords: Enter the keywords in the keywords field. When you type, Photos suggest keywords that you have used before. Press enter when you have finished a keyword. To remove a keyword, select it and press DELETE.
    • Faces: Click on and type a name to identify a face. Click on several times, and then drag the identifier of the face different faces to identify many faces in a photo.
    • Location: Enter a location in the location field. When you type, Photos suggest places you can choose. To change a location, you can search a different location or change the location by dragging a PIN on the map. To remove location information, delete it or choose Image > location, then choose Remove location or back to the original location. You cannot assign a location if your computer is not connected to the Internet.

  Show titles, other metadata and badges

  Change the date and time of photo

  You can change the date and time associated with a picture. You can do this if you are traveling to a location in another time zone, and your camera affect your dates photos and periods that are correct for your House, but not the place you visited.

  1. Select the photos you want to edit.
  2. Choose Image > adjust Date and time.
  3. Enter the date and time you want in the modified field.
  4. Click a time zone on the map, if necessary.
  5. Click on adjust.