With the help of Windows 10. How can I set DpiAwareness = 1 in AdobeCaptivate.ini

I use Windows 10. How can I set DpiAwareness = 1 in AdobeCaptivate.ini

I get an error message when I try to open the video demo.

Thank you.

You have administrator rights? It is essential to allow for the replacement of the AdobeCaptivate.ini file in the Captivate installation folder.

It's my workflow in most cases because you'll have to switch back to the original file do Captivate adapting to your retina display when you work with the application when you are finished entering.

  1. Close the Captivate and find the AdobeCaptivate.ini file in the Captivate installation folder
  2. Create a copy of this file to another location (I put it especially on the desk, but it is up to you)
  3. Open the file with Notepad (not a word processor like Word) and change the line where you will find the DpiAwareness having the value 1 instead of 0
  4. Save the file with its original name
  5. Rename the original file in the Captivate installation folder, so that it is easy to back up to again replace the modified file, may be AdobeCaptivateDPI0.ini
  6. Copy the modified (with the original name) in the installation folder

Now you should be able to launch Captivate and begin to capture. When you are finished, close Captivate, rename the file modified in Adobe CaptivateDPI1.ini, save it and and rename the original AdobeCaptivate.ini file again.

Tags: Adobe Captivate

Similar Questions

  • Since the latest version, player starts with the default tool window. How can I make my player to start without this window on the right side?

    See the title.

    Additional, I prefer to put any default zoom factor.

    Thanks for your ideas.

    Wolfgang

    P.S. I'm on a PC with WIN 7 PRO

    Hi wolfgangh61220579 ,

    would like to inform you that in MS reader, go to edit > Preferences > documents > "uncheck" the option for the tool pane open for each document, then click ok & restart the application

    Kind regards

    Christian

  • With the help of windows Explorer XP does use CPU to go to 100% and the blocking of the system forever

    With the help of windows Explorer XP does use CPU to go to 100% and the blocking of the system, forever, until closing by force.  What can I do?

    It is very difficult to manage my files.

    I suggest you download Process Explorer. This freeware utility performs a similar function to the Windows Task Manager, but it goes much further.

    For more information about Process Explorer, see here:

    http://www.Microsoft.com/technet/sysinternals/SystemInformation/ProcessExplorer.mspx

    Explorer.exe is used by a number of applications. The posting process and see which element below uses explorer.exe.

  • AlerteGPS_G520 is not compatible with this version of Windows. How can I solve this?

    AlerteGPS_G520 is not compatible with this version of Windows.  How can I solve this.

    Hello dlrod,

    The manufacturer is responsible for making their products compatible with different operating systems.

    The best would be to contact the manufacturer.

  • With the help of Windows to the top. -J' changed my settings on the page to backup several times, and now when I try to back up my computer it keeps default.

    TODAY, I CHANGED MY SETTINGS ON THE BACKUP OF THE PAGE WITH THE HELP OF WINDOWS BACK UP TO SEVERAL TIMES AND NOW WHEN I TRY TO BACK UP MY COMPUTER AGAIN, HE GUARD DEFAULT.
    I HAVE WINDOWS VISTA PREMIUM 64 BIT.
    I WOULD APPRECIATE YOUR RESPONSE

    Hello

    1. do you receive any error messages?
    2. what exactly happens when you try to backup data?
    3 have. what settings you changed?

    Please answer these questions. This will help us assist you better.

    Try to perform the clean boot.

    Refer; http://support.Microsoft.com/kb/929135

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Just installed LR6. It opens with a window that says select a catalog. There is nothing to select. With the help of windows 10

    Just installed LR6. It opens with a window that says select a catalog. There is nothing to select. With the help of windows 10

    Hey Billo,

    Could you please let me know, if you are able to see an option to "Create a new catalog" on the lower left corner of the window.

    Also, if possible, could you please attach a screenshot of the window that you see.

    Kind regards

    Tanuj

  • Lightroom showing constantly "unresponsive" and very slow since the last update. With the help of Windows 10. Extremely slow import!

    Lightroom showing constantly "unresponsive" and very slow since the last update. With the help of Windows 10. Extremely slow import!

    Hi Dear

    Please see this thread windows Lightroom CC 10 'unresponsive' number.

    Let us know if this helps

    ~ Assani

  • With the help of Windows 8.1. How can I delete a print job in the print queue has hung up?

    I have a print job that has been delete forever and will not respond.  He is suspended and cannot allow anything else to be printed.  How can I remove this.  I have windows 8.1.

    Hello

    From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

    Restart the computer and you should find that the document has been deleted.

    Kind regards

    DP - K

  • Because I'm on satellite (Hughes), I need to use a download manager to plan large downloads @ 02:00 how do then? (With the help of Windows XP)

    How can I plan a download to occur at some point? I have Hughes Download Manager, but am unable to intervene in the download process. Hughes said that the parameters have to be adjusted in Firefox or window, but I do not see where or how. Thank you.

    Firefox doesn't have the parameters like that. You need to install an external Download Manager which has a "timer".

    See this Google search

  • get error message SCR ADE 4.5 E file is not found, the source file cannot be read.  Tried to withdraw approval of & re allow including factory reset and re load but still can not read the library on my Kobo Touch book.  With the help of Windows 10...

    Hi, when you try to read the book from the public library on my Kobo Touch I get error message SCR ADE 4.5 E file is missing could not read the source code.   I tried to remove and re downloaded from the website of the public library (no luck), I did the resets, including plate and re authorizing with the reset factory and re loading (no luck).  This problem started after the last update to 4.5 ADE unfortunately as before no problem.   If anyone has any ideas, would be appreciated.   Thank you.

    Try it work when you uninstall 4.5 and install new 3.0: the Adobe Digital Editions software downloads

  • With the help of Windows Easy Transfer - need to transfer the old HARD drive to new computer - old HDD attached as external drive for the new usb port of the computer - help

    New computer installed Windows 7 and gave me an option to use Windows easy transfer to transfer files, data, programs, etc. from my old computer.  All I have from the old computer's hard drive; a lightning strike fried either food or his mother by car.  I have attached the hard as a disk to the new computer using the usb cable provided with the external hard drive case.  It is recognized as drive E: on the new computer.

    Trying to follow the instructions given by the Windows Easy Transfer software.  Get the software/folder from the old hard drive (drive E), but trying to run the software that I can't seem to do anything on the old disk.  When asked what is the former or the new computer - I respond to old, but no new file is created for the transfer.  When I answer again, a new file is created on the new computer (rather than the old HDD) and then he transferred again to new.  I can't create a file of whatever it is I want to transfer from the old HDD.

    I can't use an easy transfer cable because the old computer does not only the hard drive.  I can't connect to a network for the same reason.  I only have the hard that I can attach to the new computer.  But I can't get the new computer to process the old hard drive separately for transfer purposes.  The only other option I can think of is to attach the old HDD to another computer, and then try to run the software in this way, but I don't want just the stuff on the old hard drive a copy to the other computer.

    Can anyone help?  Suggest how to get the old hard drive files, data, transferred etc. to the new computer.  What are the steps?

    Thank you.

    Do yourself a favor, with the old drive connected externally, in the browser, simply copy the data files to the location of Documents of the PC win7. You can not copy programs, they need to be reinstalled from media origonal. You can copy all the downloaded files instalation

    You may need to take possession of your old documents folders - see win help to find out how

  • With the help of Windows Live Essentials Screensaver

    Recently I have re-installed Windows 7/64 through the recovery partition on my model of HP Pavilion p7 - 1070 t

                                        
    OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
    Processor: Intel (r) CPU of Core i3-2120 3.30 GHz, Intel64 family 6 model 7 Stepping 42
    Number of processors: 4
    RAM: 6050 MB
    Graphics card: Intel HD Graphics, Mo-1988
    Hard disks: C: Total - Mo 703947, Free - Mo 638315; Total D: - 11353 MB, free - 1386 MB;
    Motherboard: PEGATRON CORPORATION, 2AC2
    Antivirus: Norton 360, updated and activated
    I had been using the Live Essentials screen saver before the re-setup, specifically the "Pan & Zoom" function, but now it is not available.  To access parameters, I am limited to a consecutive display of photos chosen by me, but without transition effects: poster photo for x number of seconds, then simply flicks and the next photo simply move on.  The words "this computer's video card can't play themes" obviously has something to do with it.  Any suggestions?  Apart from that, everything on my system works fine, and the device manager says the same thing.

    Hello

    This problem occurs if the graphics score card (Windows performance index) is lower than 3.0.

    I suggest you follow the provided methods to solve the problem.

    Method 1: update the Windows Experience Index Score.

    Follow the steps.

    a. click the Start button.

    b. open the Control Panel, click system and Maintenance, and then click Performance Information and tools.

    c. click on update my score. The evaluation will run for a few minutes.

    d. after the assessment is complete, open Windows Live Photo Gallery screensaver settings page to see if themes are enabled.

    If the problem persists, I suggest you follow the method provided.

    Method 2:

    a. Click Start, type Regedit.exe , and then press {ENTER}.

    b. navigate to the following location:

    HKEY_CURRENT_USER-Software-Microsoft-Windows Live-Library------slideshow

    c. double-click WinSATScore, select decimal, and set the data value to 300 (or more).

    d. quit Registry Editor.

     

    Note: Follow the steps and check if the problem still persists.

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ )

    How to back up and restore the registry in Windows

    If the problem persists, I suggest you send your query on the Windows Live Forum.

    http://answers.Microsoft.com/en-us/windowslive/Forum/Gallery

    If you need help with the Windows operating system, just tell me and we will be happy to help you.

  • Not able to boot after that windows update, just trying to install the number 3 setting 3, and then restart the computer. With the help of Windows Vista SP2

    Friday morning I wasn't able to boot my computer more. When I start my computer it won't seek to set a parameter nr 3 of 3. And then it restarts again. My computer tried to install some windows update settings the day before with no success. I Don t remember what it was. I got Vista SP2

    The same problem happends to my computer from friends four days, after she start a windows update installation. But it has solved its problem by using the Windows installation CD and use the repair tool.

    For me, my Windows installation CD I got from Dell does not work. Not the tool repair or startreparation. And I have no reference system to return.

    What should I do? I don't want to reinstall windows again, I have a lot of information on the computer I need to.

    All the world has noticed this problem?

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    See you soon.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work, try to make a Bootable ERD to do a Startup Repair:

    As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

    As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    You can make a tool to restart system, System Restore, etc. with it.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista repair disc.

    You can do a system restart tool, system, etc it restore.

    There is not a disk of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the ISP above Mathods to solve your problems, save your data using one of the methods below, and then reinstall Windows:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    See you soon.

    Mick Murphy - Microsoft partner

  • With the help of Windows 8 license on Bootcamp.

    Original title: Mac Bootcamp with Windows 8.

    question 1 - can I use the license and bought Windows Pro 8.1 installer from the Microsoft store? I'm not sure about this, because what they acknowledge are users of Windows 7 and XP.

    2nd question - in case, I wanted to uninstall and remove my windows partition 8 (bootcamp) and use it for another time, but on the same computer and with the same method (bootcamp), can I re-use my license key?

    Thanks in advance to all who will answer my questions. My apologies for the way I asked my questions.

    question 1 - can I use the license and bought Windows Pro 8.1 installer from the Microsoft store? I'm not sure about this, because what they acknowledge are users of Windows 7 and XP.

    You cannot use the wizard upgrade in OS X. You will need to download it to a Windows-based computer that is running Windows 7 or Vista and create a. ISO file you need to transfer to OS X.

    2nd question - in case, I wanted to uninstall and remove my windows partition 8 (bootcamp) and use it for another time, but on the same computer and with the same method (bootcamp), can I re-use my license key?

    Yes, you can transfer the license to another computer, but you will need to reactivate over the telephone.

    Activation of the phone:

    1. press the Windows key + X , and then click run, and then type: slui.exe 4

    2. then press the ENTER"" key.

    3. Select your "country" in the list.

    4. choose the option "activate phone".

    5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

    6. explain your problem clearly to the support person.

    Thanks in advance to all who will answer my questions. My apologies for the way I asked my questions.

    You will need to use it on a Windows based PC running Windows Vista, Windows 7 or Windows 8/8.1

    An alternative is to download the Windows Enterprise 8.1 90 day trial and use it to facilitate the installation of the copy that you have downloaded.

    Download Windows Enterprise 8.1 90 days:

    http://www.Microsoft.com/en-us/evalcenter/evaluate-Windows-8-1-Enterprise

    Make sure you only download the architecture that is supported on your Mac, if you plan to use 32-bit or 64-bit of Windows 8.

    To learn more:

    http://Windows.Microsoft.com/en-us/Windows/32-bit-and-64-bit-Windows

    Once you have the Windows Enterprise 8.1 downloaded ISO 90 day trial, use it to install Windows on your Mac with Boot Camp 8.1:

    http://arstechnica.com/information-technology/2012/11/no-support-no-problem-installing-Windows-8-on-a-Mac-with-boot-camp/

    Once you have Windows Enterprise 8.1 90 trial upward and running, download the Windows 8.1 Upgrade Wizard and use that to install the copy of Windows 8.1 you buy:

    Also, make sure that you create the installation during the installation media:

    http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  • With the help of Windows 8

    Hello world!

    I just bought a Ultra nine Fujitsu book in which Windows 8 is already installed. But the C disk storage is just show 29 GB, but it has a space of 500 GB

    Disk Management shows that disk 0 basic contains unallocated space of 465 GB while the rest 1 disc base show 29 GB C drive. Please help me as soon as possible.

    Without having to re - install windows? Can I recover the storage space? As I'm not a technical person. Please provide an easy solution, I have also attached the image of the disk management page

    Hope you understand

    Concerning

    Ghaza

    Hi Ghazal,

    The image provided that clear although not that there are 300 MB of the recovery partition. This is provided by the Original Equipment Manufacturer (OEM) to do a factory reset if you have problems with the operating system. However, the 465 + GB space does show as unallocated. This unallocated space can be used, but there is a risk of losing the operating system as it is installed on the C: partition. OEM is those who create the partition and install the operating system. So, I suggest you to contact the computer manufacturer to extend the volume and make use of the unallocated space.

    Refer to:

    http://www.Fujitsu.com/global/support/?custom01=MDD

    I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

Maybe you are looking for