With the latest two updates (on 31.1 now) continues to Thunderbird, from rarely e-mail addresses used for those that I use all the time.

Similar Questions

• I try to install the two updates, they do not have continually it says error unknown 66A?

  I try to install the two updates, they do not have continually it says error unknown 66A?

  Hello

  Is update fails with error code?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try a clean boot, and then try to install the updates.

  How to solve problems using the boot in Vista:
  http://support.Microsoft.com/kb/929135
  Note: once you have completed troubleshooting, please be sure to try step 7 to reset the computer as usual.

  Method 2:

  If it still fails, try to download and install the update manually by using the following link: http://www.microsoft.com/download/en/default.aspx

  If there are still problems, install the update, reset the Windows Update components

  Reset the Windows Update components: http://support.microsoft.com/kb/971058

  I hope this information helps. Please get back to us if you have any other questions on this subject.

• I have problems with my computer with the time remaining after I reset the clock and made sure it was on the correct time zone and summer time has been check the battery has also been replaced

  and it will not keep the exact time it will keep accelerate at least 5 minutes or more.

  I don't know what else to do about it. You can someone help me?

  I still find myself make too many assumptions.
  First of all, I guess your derivative of clock occurs during the time when the computer is running and not during the period where it is off (or immediately early)?
  Second, I'm assuming that when you run the command "w32tm/Resync" above, the clock made it back to the correct time and no errors were reported?
  Third, you say that your clock drift 5 minutes or more, but you do not tell us how long this gain occurs.  It is two times more win if you wait twice as long to check?  Is the gain gradual or sudden?  Keep he wins or if he stops wins once it arrives before?

  Conditions of default for a computer connected non-member of the field, the time will be updated network-time only at the start and then once a week.  If you are winning too much too quickly, you can adjust how many times your computer asks for time.  Computers in the domain must be more precise and one every hour for a default time synchronization.  You can set your W32tm to that of a computer in the domain to resynchronize your computer more often (SpecialPollInterval).  Here are two articles that describe the clock settings:

  "How to synchronize the time with the time service Windows in Windows XP"
    <>http://support.Microsoft.com/kb/307897 >
  "Time Windows Services tools and settings.
    <>http://TechNet.Microsoft.com/en-us/library/cc773263%28V=WS.10%29.aspx >

  HTH,
  JW

• help me create a column with the time format

  Hi all
  
  Please help me find the query to create a table with 3 columns and insert the following data
  
  ENTITYID | CHGDATE | CHGTIME
  
  ======= ==================== ========
  
  4214984 | 2 OCTOBER 06 12.00.00.000000 AM | 07:23:57
  
  4214985 | 12.00.00.000000 11-SEP-08 AM | 10:52:19
  
  and update of the first line of the above table as follows
  ---------------------
  4214984 | 2 OCTOBER 06 07.23.57.000000 AM | 07:23:57
  ------------------------
  you will need to update the CHGDATE column with the time of the CHGTIME column.

  Sorry, we need a new format around the to_date

  select to_date(to_char(chgdate, 'mm/dd/yyyy') || ' ' || to_char(chgtime, 'hh24:mi:ss'), 'mm/dd/yyyy hh24:mi:ss') from etime3;
  

  This should telll Oracle to the format of the generated string. If this isn't the case, run select with the to_char two as separate columns to see that get us the data that we expect.

• Microsoft Windows 7 is not syncronozing with the time server, what can I do about it?

  Windows does not synchronize with the time server. For me, it says that there is no previous time being synchronized on the record, but I don't see why it should not be synchronized at all!

  Have you tried one of the alternative servers?

• I have the problem with the time in my laptop

  Hello everyone,

  I have issue with the time, whenever I stop my laptop for 2-3 hours. He return to date 01/01/2006 12:00 AM

  What should I do?

  Hello

  Did your laptop more than a few years old?

  The symptom you describe occurs when the battery that powers the CMOS BIOS chip wears.

  The CMOS battery is responsible for providing voltage to the CMOS chip so that he remembers actually all parameters, including the time and date, that have been defined.

  Replacing the CMOS battery is pretty simple in a standard OEM desktop PC. Unplug the unit. Open the case locate the quarter size battery. Remove the old battery and replace it with a new one. Plug in power and start the PC and set the time and date and accept the default settings. That's about all there is to it.

  Replacing the CMOS battery in a laptop requires generally a bit of disassembly of sequential parts just to get to the battery. Not all laptops are, but most are like this.

  I recommend that you have the CMOS battery, replaced by a HP authorized repair center.

  Kind regards

  ERICO

• I have installed Adobe Audition on my pc but I have a problem with the time and the effects of pitch appear unavailable

  I have installed Adobe Audition on my 64-bit pc but I have a problem with the time and the effects of pitch appear unavailable because... I can do?, installed on another PC laptop 64 bist and does not

  My guess is that you are in multitrack view and not editview

  These fx are destructive and only take effect when you change a single audio file in editview

• DatePicker with the time in the report of the collection

  Hello
  
  I've created a report through collection. Now, I want an APEX_ITEM. DATE_POPUP with the time in the report.
  To do this, I made some changes in my report, when I change APEX_ITEM. TEXT in APEX_ITEM. DATE_POPUP, then there is an error a occure and when I the lance.
  
  Error: - ORA - 01858: a non-digit character was found here where was waiting for a digital.
  
  
  my code is
  
  Select HTMLDB_ITEM. HIDDEN(1,SEQ_ID),
  APEX_ITEM. C001 Text(2,a.C001).
  APEX_ITEM. DATE_POPUP (3,a.c002,'DD/MM/YYYY HH24 ') c002.
  APEX_ITEM. Text(4,a.C003) c003
  OF APEX_COLLECTIONS one
  where a.collection_name = 'REC_ITEM. '
  
  
  I change here too.
  
  Start
  
  because me in 1... HTMLDB_APPLICATION. Loop G_F01. Count
  htmldb_collection. () UPDATE_MEMBER
  p_collection_name = > 'REC_ITEM ',.
  p_seq = > HTMLDB_APPLICATION. G_F01 (i),
  p_c001 = > HTMLDB_APPLICATION. G_F02 (i),
  p_c002 = > to_date (HTMLDB_APPLICATION. G_F03 (i), ' DD/MM/YYYY HH24'),
  p_c003 = > HTMLDB_APPLICATION. G_F04 (i)
  
  end loop;
  
  htmldb_collection.add_member
  (p_collection_name = > 'REC_ITEM',)
  p_c001 = > NULL,
  p_c002 = > NULL,
  p_c003 = > NULL,
  );
  end;
  
  
  In the datepicker report has created, it is not a datepicker with the time, see the only date, not a date with time.
  
  
  
  Thank you
  Maury

  Maury, I've done a workaround, you can read here: error in date picker in relation to collection

  Edited by: AndyPol 2009-09-11 16:24

• several scales on Y with the time axis

  Hello. I'm new to the tiara. My first impression is that it's interesting.

  I have a few questions about the number of scales.

  So, how many scales on axis Y can Diadem support? Of course, a time axis.

  I mean, I have an excel (text) file with 6 columns, one for the time. Is it possible to have a graph with 5 scales, each scale for a signal (column)?

  The limit of the scale for Excel is 2 (two).

  Thank you.

  Hello dsasorin,

  I went ahead and made an example with 10 spindles on axis x, same color coded the axis labels. Brad was already properly mentioned that 20 is the limit, but as you can see, 10 already uses a lot of space for the axes vs real graphics, although these a little more tight, I guess I could have done.

  

  Not the prettiest report ever, but it should get the message. It took me less than 5 minutes to create this example once I decided what data to use. If you are a model, it will take less than 2 seconds to create this for multiple data sets which have a similar data structure...

  Let us know if you have any additional questions,

  Otmar

• Problems with the time in Windows 7 (64-bit)

  The time on my computer is always off.  Even when I change the time to the exact time in my bios the weather is bad in Windows.  I chose the right time zone, but it's still 6 hours off.

  When I was first troubleshooting I could just sync the clock to the internet through the GUI, but after a reboot or two time, the weather was wrong, once again.  I was looking for something more permanent then I tried things like the time service restarts windows.  I followed these instructions then because this person was having a similar problem.  It was suggested to run these commands:

  net stop w32time

  w32tm /unregister

  w32tm /register

  net start w32time

  w32tm/Resync

  This helped temporarily, but now I have an error the command net stop time w32t.  CMD says "the time service Windows is not started."

  When I go to my services time service Windows is there but not started.  When I try to run it I get this error:

  Here is a picture...

  I hope this is enough information.  Thanks for the help!

  Hi EvanDinelli,

  To resolve this issue, follow these steps:
  
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  a. Click Start, type regedit in the search box and then click regedit.exe in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  b. Locate the following registry subkey and click on it:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TapiSrv

  (c) in the part of details, right-click ImagePath and then click on edit.

  d. in the value data box, type the following registry value, and then click OK:
  %SystemRoot%\System32\svchost.exe k NetworkService

  Note if NetworkService does not appear in the registry %SystemRoot%\System32\svchost.exe - k NetworkService value, the problem that is described in the "Symptoms" section may occur.
  e. exit the registry editor and then restart the computer.
  Note if you try to start the telephony service before you restart the computer, you may receive the following error message:

  Error 1290: Starting the service failed because one or more services in the same process have a service SID inconsistent type parameter. A service with service restricted SID type can only coexist in the same process with other services with a restricted SID type. If the type of SID for this service has been configured, you must restart the hosting process in order to start this service.

• Is anyone having problems with the Times and the Sunday Times App

  Im having problems loading from the Times and the Sunday Times app. Before I launch into a major description (I have Parkinson's disease, and typing is slow) is there a known issue with the application at the present time

  There has been a lot of problems with this app as soon as they have a clear, the other seems to appear.    Take a look at this link and it followed in areas where you are affected by.

  http://www.thesundaytimes.co.UK/Sto/multimedia/archive/00258/Helpguide_stripped _ _258975a.pdf

• synchronize the loop with the time on the computer

  I'd like to run a while loop exactly all the 1 minute, with the minute that occur according to the time on the computer at 0 seconds.

  a timed loop runs a minute after the loop is started and is not synchronized with the 0 seconds of time on the computer.

  How do I get there? I realize the first loop will be less than 1 minute, due to the synchronisation.

  Thanks, that helped me.

  I thought at the start of the second 1 loop would consume resources additional, but realized it's negligible.

  I ended up using quotient/remainder on time on the computer in seconds and checking when the remainder is 0, as this allowed for the second interval.

• Problem with the time in the calendar

  Hello.

  My problem is that I can't properly store the time in the calendar! What I'm saying.

  I get a date as a String form a JSON (ex: 2010-08-09 15:15) and I analyze! So far so good.

  But when I store an event in the calendar with the date and the time, it is saved as 2010/08/09 18:15 therefore to the time zone of the device. Any ideas how to get the time from string?

  I looked like this:

  public long convertDate (String date){
  
  return HttpDateParser.parse(date);
  
  }
  

  thnx in advance!

  We addressed this issue several times: here's a thread on the subject.

  http://supportforums.BlackBerry.com/T5/Java-development/convert-DateTime-to-user-s-local-DateTime/m-...

• How can I get rid of the square with the time and date in which pops out all the time and also the thing aside

  Would like to know if there is a way to get this huge place with date and time to turn off my computer and also the side thingy that comes out all the time and the date and time... it is frustrating to do something on my laptop and all of a sudden here they come out and I can not do a thing until I get them to go back whence they came there at - it a path to delete or if they are not all the time I don't really care for windows 8... Windows 7 was fine with me... not sure what to do thank you for your help frustrated

  What a kind screensaver which is scheduled to start after one minute of inactivity?

  What has happened since the first day?

  Another program or process is causing the problem, what happens if check you mode safe and a clean boot to see if you can find the cause?

  How to start Windows 8 in Mode safe
  http://www.bleepingcomputer.com/tutorials/start-Windows-8-in-safe-mode/

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

  If you test with another Windows user, rather than your current user, you have the same problem?

  Any chance of linking to, or provide a screenshot of what you see?

  How i: post a screen shot on this forum?
  http://answers.Microsoft.com/en-us/feedback/forum/feedback_other-na/how-to-insert-images-in-MS-answers/94a5cb36-A21F-4A6A-B266-611cf6c910c8

  How can I insert a picture in a reply to a message
  http://answers.Microsoft.com/en-us/feedback/forum/user/how-do-i-insert-a-photo-into-a-reply-to-a-post/17a15382-c587-44BB-9594-c0673c8402af

• Need help with the time system

  I am trying to determine the time current system. It would be checked to determine if it is spent some time. (that is, the current time is after 15:00?) If so, the user would be prompted with a message saying if.) The system time would be verified only during a reset of the form.

  var now = new Date();

  The variable "now" be held next time current system.