With the Selection tool over new layer but becomes "the selected area is empty."

Similar Questions

• I have Photoshop CS6 extended. When I create a new layer, I get the following message. Could not complete the command because the selected area is empty. What I am doing wrong?

  I have Photoshop CS6 Extended. When I create a new layer, I get the following message. Could not complete the command because the selected area is empty.

  What I am doing wrong?

  Thanks for any help

  Bob.

  How do you create the new layer? Looks like you have a selection and use ctrl/cmd-J. If you have a choice and it is empty, you will get this error.

• Align WPF elements with the plot area

  Is there a recommended way to align WPF elements outside the graph with the plot area? I like my UI align the left edge of area of land. Another use case is lining up outside elements with a RangeCursor.

  The way we do now is to add a canvas as a child of the graph. The canvas contains a hidden Visual position ourselves with Canvas.SetLeft using values calculated from the graph margin and padding. Then, we call PointToScreen (new Point (0,0)) on the display. It works most of the time, but the position of the Visual sort of trolling the real edge graphic when the y-axis range changes (and a few other changes axis, that I've not completely nailed down). By calling UpdateLayout on the display when the range changes, I can make it work most of the time, but when I do that, I find that I spend a lot of time CPU in the user interface thread to this appeal.

  Currently, the graph does not directly expose the offset of the plot area in the border of the control. Your method of using a nested Visual to calculate the offset appears as a reasonable approach with the current API. I created a quick mock-up using this approach for certain forms of referring to the plot area and a range slider:

  XAML
      
          
              
              
              
          
          
              
              
              
          

  LayoutUpdated="OnGraphLayoutUpdated">
              
                  
                  
              
              
                  
                  
              
          

  
          
          
          
      

  Code
      public partial class MainWindow : Window {
        private static readonly Range RelativeRange = new Range( 0.0, 1.0 );

  public MainWindow( ) {
            InitializeComponent( );

  rangeCursor.HorizontalAxis = xAxis;
            rangeCursor.VerticalAxis = yAxis;
        }

  private void OnGraphLayoutUpdated( object sender, EventArgs e ) {
            UpdateAlignment( );
        }

  private void UpdateAlignment( ) {
            Size size = graph.RenderSize;
            if( size.Width <= 0.0 || size.Height <= 0.0 )
                return;

  // Get reference point to canvas in bottom-left corner of graph.
            var referenceTransform = referenceVisual.TransformToVisual( graph );
            Point graphBottomLeft = referenceTransform.Transform( new Point( ) );

  // Apply margin to size and bottom-left reference point.
            Thickness margin = graph.Margin;
            size.Width += margin.Left + margin.Right;
            size.Height += margin.Top + margin.Bottom;
            graphBottomLeft.X += margin.Left;
            graphBottomLeft.Y += margin.Top;

  // Calculate top-right reference point.
            Size plotAreaSize = graph.GetPlotAreaSize( );
            Point graphTopRight = new Point(
                graphBottomLeft.X + plotAreaSize.Width,
                graphBottomLeft.Y - plotAreaSize.Height );

  // Get reference points for range cursor within plot area.
            var horizontalRange = rangeCursor.GetRelativeHorizontalRange( ) ?? RelativeRange;
            var verticalRange = rangeCursor.GetRelativeVerticalRange( ) ?? RelativeRange;
            Point cursorBottomLeft = graph.RelativeToScreen( new Point( horizontalRange.Minimum, verticalRange.Minimum ) );
            Point cursorTopRight = graph.RelativeToScreen( new Point( horizontalRange.Maximum, verticalRange.Maximum ) );
            cursorBottomLeft.X += graphBottomLeft.X;
            cursorBottomLeft.Y += graphTopRight.Y;
            cursorTopRight.X += graphBottomLeft.X;
            cursorTopRight.Y += graphTopRight.Y;

  // Set margin to align graph and cursor visuals.
            graphTopRectangle.Margin = new Thickness { Left = graphBottomLeft.X, Right = size.Width - graphTopRight.X };
            graphLeftRectangle.Margin = new Thickness { Top = graphTopRight.Y, Bottom = size.Height - graphBottomLeft.Y };
            cursorBottomRectangle.Margin = new Thickness { Left = cursorBottomLeft.X, Right = size.Width - cursorTopRight.X };
            cursorRightRectangle.Margin = new Thickness { Top = cursorTopRight.Y, Bottom = size.Height - cursorBottomLeft.Y };
        }
    }

• When I upgraded to Firefox 9.0.1 I lost many of my bookmark icons. Now the icons are just empty boxes. How can I get back my icons? Thank you!

  When I upgraded to Firefox 9.0.1 I lost many of my bookmark icons. Now the icons are just empty boxes. How can I get back my icons? Thank you!

  Try to recover with this extension:

  • CheckPlaces: https://addons.mozilla.org/firefox/addon/checkplaces/
  • Favicon bookmark changer: https://addons.mozilla.org/firefox/addon/bookmark-favicon-changer/

• Explorer Windows with the "C" drive is empty

  Using Windows Explorer, right click on C:, click 'New' to the left and to the right answer is '(empty) '.  Do the same with a subfolder of C:, clicking on 'New' allows me to add a new Briefcase, but not a record.  I need to add new folders in C:.  Thank you for all that help you can provide!

  I guess you mean that the context menu that normally would say "File" as shown below (or maybe "Folder" and "Satchel") at a place called '(empty)' if so, see the following (I have not read through all 7 pages of the thread, but I believe that sometimes, the solution is simple and it takes sometimes a little more effort)--> http://answers.microsoft.com/en-us/windows/forum/windows_7-system/new-folder-option-missing-from-desktop-context/aea63f87-fa4f-4115-9b2b-dea878326856

  This may be redundant to some of the comments in the thread above, but it contains pictures that can better illustrate what is happening--> http://www.sevenforums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html

  

• OSPF in VRF with the same area ID.

  Hi all

  On a PE MPLS/VPN router, I configured OSPF as the routing PE Protocol / THIS.

  I configured several OSPF (one for each VRF) process.

  But if I have several customers who use the same ID in OSPF area on the side, can I set up the same area ID for multiple OSPF processes on the side of PE? Of course, all these areas are independent and I don't want to see customer1 routes into the OSPF customer2!

  In the following example, I have 2 clients. Each client has 2 sites and has a backbone OSPF area which spreads across 2 sites. For each customer, I want to interconnect its 2 sites and extend the dorsal area OSPF MPLS.

  Customer1 OSPF backbone area is different from that of customer2, although the ID is the same...

  Here is an example of configuration of the EP:

  G0/1 interface

  IP vrf forwarding customer1

  10.1.1.1 IP address 255.255.255.0

  !

  G0/2 interface

  IP vrf forwarding customer2

  10.1.2.1 IP address 255.255.255.0

  !

  !

  router ospf 1 vrf customer1

  Network 10.1.1.0 0.0.0.255 area 0

  !

  router ospf 2 vrf customer2

  Network 10.1.2.0 0.0.0.255 area 0

  Will not have problems if I use the same area ID here?

  Thanks for your help!

  Hello Sam,.

  You will not face any problem because you have configured cust1 and cust2 under vrf instance in ospf. There will be no

  mix with cust1 cust2 roads.

  In addition to this, also set up the id of the field (a 32 unique ip address) under process ospf for each customer. The reason why if you configure the ospf process

  ID 1 for cust1 at the end and if configure you the process id 2 for the same client on the spread of roads from start to finish B will be considered

  inter-area at the B end

  router ospf 1 vrf customer1

  field id 1.1.1.1 OSPF > keep this even to this vrf on each site

  Network 10.1.1.0 0.0.0.255 area 0

  Hope this is useful

  Concerning

  Mahesh

• I get no email from some people. I used to retrieve messages from them. The I struggle with the addresses are. matskivskayakatunya@mail.ru and atento1990@yandex.ru

  I have been emailing the address; [email protected] for almost a year and a few months ago it stopped. And I've been e-mail address [email protected] for a month and all of a sudden, it stopped? I chatted with the girl at the last address today and she said that she sent me an email a few days ago. It never occurred to me! Please help me to know what is happening here.
  Sincerely, BRENT

  Firefox send an e-mail, it's strictly a web browser.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, check out this forum for support.
  http://www.mozillamessaging.com/en-us/support/
  
  or this one
  
  http://forums.mozillazine.org/viewforum.php?f=39

• Why microsoft has so many technical problems with the Gaming area?

  The site is down a few times more than 72 hours in a row.  There was opportunities, that the site went down every other day for a week.   The page that opens after the servers have been can be improved.  Error messages its users the impression that this is a technical error with their equipment.  This only promotes the frustrations of users because they spend hours trying to solve a problem that never existed.  Players are NEVER kept in the loop. Updates on Facebook are not and some who are regular users of the game area are forced to explore other sites of games because of that.  Microsoft has the best games around.  It would be a shame if they lose all their followers to a competitor.

  Hi Celine,

  Are you referring to MSN games?

  If so, I suggest you to contact the game MSN Support for assistance on this issue.

  Check out the link:

  http://zone.MSN.com/en/support/article/support3500.htm

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• The photo area is empty

  That's what I get.

  LR works well since last October, but suddenly I see no picture. Everything else on my computer still works CS5 including grand and bridge. Any suggestions?

  Thanks in advance.

  

  It is usually a problem with the video driver or a bad monitor profile. Try to recalibrate your monitor.

• Firefox hangs at random, even with all extensions disabled and new profile, but not in safe mode

  From about 2 weeks ago, Firefox has been crashing. Accidents is seemingly random, but normally occurs when several pages/tabs are opened. In addition, all observed accidents occurred in the middle of some operations of the user. If I leave it just opened (and responsible), he would never crash even after a long period.

  Also, accidents happen even once all extensions are disabled manually. However, it seems not to happen in Mode without failure.

  After each accident, in the crash report dialog box, the 'Détails' report would not respond. However I can open reports using the command about: crashes.

  Before the accident would happen, sometimes evil-following behaviors may be observed:

  • Firefox fails to render characters CJK, their view as a rather square boxes
  • Ideogram IME(Namely Google Pinyin, an IME for Simplified Chinese) is no longer can be enabled in Firefox, on a Web page element, or on the UI of Firefox itself (i.e. the address bar or the search bar)

  The following has been tried but no luck:

  • Disable all extensions manually
  • Start a new profile
  • Reset Firefox
  • Uninstall/reinstall Firefox
  • Beta version of FX, 14 to 15, and then to 16

  Hello Rainarrow, other users who have recently updated the graphics driver for their ati hardware (for the version of catalyst ati 12.8) reported similar accidents. Please try disabling hardware acceleration in firefox > options > advanced > General & see if that solves the problem of frequent accidents at the moment.

• Page with the content as virtually empty in Firefox 3

  Hello

  I'm testing my beginner-draft-very-simple-and-basic Web site in various browsers on Windows XP and Mac OS 10.5. So far, he has involved in Internet Explorer 7, Chrome 1 and 3 of Firefox on Windows XP (emulated on my Mac) and Safari 4 and Firefox 3 on Mac OS X. Funnily enough, my site will appear virtually empty on Firefox, be it XP or Mac OS X, although it seems as planned (with minor differences) on other browsers. I have attached a few screenshots (I can't put the source somewhere that I have not worked out how to do it again).

  I'm a little surprised at this result. I expect IE to give me endless trouble (he does but so far within acceptable limits), not Firefox. I am totally new to Web site, so I have no idea as to why this happens. Is it because of my system set in place or is it just a browser issue? How can this problem be fixed?

  Thanks for any comments,

  Emilie

  P.S.: In the screenshots below, Firefox on Mac OS is same as Firefox on XP (not attached).

  RUN FOR YOUR LIFE!  COMMENT MONSTER GOT LOOSE AGAIN!

  I'm sorry.  I lost control.  Why on earth would EVER need to have a comment almost all other lines of code?

  Try to change this-

  
  
  
  
  
  
  

  on this subject.

  
  

  and take a long rest from the HTML comments.  They are what cause your problems - Firefox think your entire page is somehow in the wrong column since you are abusing them.  Don't put long strings of dashes inside your comments, for example,