With U2410 PIP: cannot use the HDMI and DVI inputs at the same time

Similar Questions

• Win7 with FF 31, smart phone 4.2 with FF letest ver. using the same account with 1 email. But the phone is not getting any collar, Bokmr, etc.

  Brother.
  We use win7 with Mozila 31, 4.2 with Mozila Android smart phone latest google app store on 04/10/0214. Using the same account with the same email. But the phone does not get any new information of win7 with Mozila 31. PL z give useful information.

  Hi w3ur_team,
  Thank you for your question. I understand that there are two features that are documented in the sync account. However the Android is not synchronized.

  There are two places we can check:

  1. In the Android settings, under accounts is the Firefox Sync or Firefox Sync (discouraged) joint account?
  2. Credentials work on accounts.firefox.com on the mobile device and are there any error messages in the synchronization of the settings menu > sync?

  See also Firefox Sync troubleshooting and tips for more troubleshooting steps.

• Router with dual SIM functioning at the same time

  Hello

  Does anyone know of a Cisco router thar support dual SIM (4G) with the two cards at the same time work? I don't want to limit; I have a card that allows access to the VoIP MPLS VPN and the other will give access to MPLS VPN data. Is there any material that would allow me to do this?

  Thank you and best regards,

  João.

  You will need to get a modular router, like a 1941 and put two cards 4G inside and a SIM card in each card.

  Personally, I think I would go with a pair of 4G-890 series routers and use routing to control the flow of traffic.

• Problem with the connection of two computers with windows7 to internet at the same time with wrt110

  Me and my friend have two windows7 installed on our computers.

  If one connects to the internet via a WRT110 wireless router it goes without any problems.

  But if we both try to connect to the internet at the same time, it does not connect.

  Can anyone help?

  You can try the upgrade/flashing the firmware on the router... Download the firmware from www.linksys.com/downloads and save it on the desktop... Opening of session in the Linksys GUI and click on the Administration tab... Click on the "firmware upgrade" sub-tab and choose the correct .bin file... click on upgrade... Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now, hold down the button to reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

• Tecra R850 with Windows WXP - cannot use the FN key

  Hello

  On a Tecra R850, I can't use the FN key. I installed all the drivers for toshiba and they does'nt work

  Help

  Thank you

  Hello

  All this is a bit complicated with WXP and it is important to install everything in the right installation order. After some base such as chipset, display and sound drivers you need to install the common modules at the beginning and continue with Toshiba-specific tools and utilities like controls, screen, energy saving and so on.

  You can use a combination of FN keys or none of them does not work?

• my pc is Windows xp. but I up grade to windows7 and I want to register with microsoft. can I use the same disc if I reboot my pc?

  help me with this plese...

  It is not clear what you're asking. Next time please put your question - with enough detail to be clear - in the body of the message, not on the subject line.

  I interpret your message to mean:

  1. you have a computer with Windows XP.
  2. you're going to buy a Windows 7 upgrade, using the Windows XP install like materials for upgrading qualification.
  3. you want to know if you can use the Windows XP license on another computer.

  If I interpreted your message correctly, the answer is 'no '. The Windows XP license is subsumed under the license of Windows 7 when you use it for an upgrade.

  If this wasn't what you meant, please clarify. MS - MVP - Elephant Boy computers - don't panic!

• update of table with similar registration information using the same key

  Version: 11.1.0.7.0

  We have large table probably 30 M records

  -test code table follows

  create table people)

  person_id number,

  first name varchar2 (50).

  middle_name varchar2 (50).

  last_name varchar2 (50)

  );

  insert into persons (person_id, first_name, last_name, middle_name) values (1, 'JOHN', 'A', 'DOE');

  insert into people (person_id, first_name, last_name, middle_name) values (1, 'JOHN', ","DOE");

  insert into persons (person_id, first_name, last_name, middle_name) values (1, 'JOHN', 'ADAM', 'DOE');

  insert into persons (person_id, first_name, last_name, middle_name) values (2, 'JOHN', ' C ', 'DOE');

  insert into people (person_id, first_name, last_name, middle_name) values (2, 'JOHN', ","DOE");

  insert into people (person_id, first_name, last_name, middle_name) values (3, 'JOHN', ","MOE");

  insert into persons (person_id, first_name, last_name, middle_name) values (3, 'JOHN', 'FRANK', 'MOE');

  I am trying to write more efficient code to take the middle name of the most complete and updated all records with the same KEY (person_id) with her.

  Expected result:

  1, JOHN, ADAM, DOE

  1, JOHN, ADAM, DOE

  1, JOHN, ADAM, DOE

  2, JOHN, C., DOE

  2, JOHN, C., DOE

  3, JOHN, FRANK, MOE

  3, JOHN, FRANK, MOE

  Hello

  Here is an example of the use of the aggregate LAST instead of the function ROW_NUMBER analytic function:

  MERGE INTO dst people

  WITH THE HELP OF)

  WITH got_longest_middle_name AS

  (

  SELECT person_id

  , MIN (middle_name) DUNGEON (DENSE_RANK LAST ORDER OF LENGTH (REPLACE (middle_name, '.')))

  AS longest_middle_name

  AMONG the people

  WHERE middle_name IS NOT NULL

  GROUP BY person_id

  )

  SELECT person_id

  longest_middle_name

  Got_longest_middle_name c - c is for candidates

  WHERE DOES NOT EXIST)

  SELECT 1

  AMONG the people

  WHERE person_id = c.person_id

  AND c.longest_middle_name NOT AS REPLACE (middle_name, '.'). '%'

  )

  )             src

  WE (dst.person_id = src.person_id)

  WHEN MATCHED THEN UPDATE

  SET dst.middle_name = src.longest_middle_name

  WHERE dst.middle_name <> src.longest_middle_name

  OR dst.middle_name IS NULL

  ;

  I suspect that this may be a little faster, but try it on your system with your data to make sure.

• Two fields with accent... at the same time.

  Yes, I know, it will not be possible, but I'm the see.

  Literally have a training log with calls to isFocus() to the two different fields in two different frames and both return true.

  The problem, it seems that one of the field is undefined fuzzy after that setFocus is called on another field, thus they refer both they bear!

  Has anyone seen anything like this before?

  Was about to write that the setFocus() method manager not was not correctly propagated to the field focusable child.

  The substitution of the setFocus() manager 2 with a call directly to the field focusable setFocus() fixed this problem.

  setFocus() doc manager says he'll try to setFocus on the first field in the Manager.   Of course, this does not work (the focus field was the first field) and caused a track weird behavior of collage.

• Problem with "make several images at the same time"

  When I try to activate "Made simultaneous multiple images" in Edition > Preferences > memory and multitasking, I have problems when I go.  I click on "View" and for about one second long video the video shows very well, but suddenly changes to the default screen that indicates when a file is missing.  Any ideas why this could be?

  2 GB of Ram

  It is not enough RAM to use effectively simultaneous multiple images rendering.

  The bare minimum is 1 GB per background process, and that doesn't count all the RAM that use other things such as your operating system and other applications.

  So, I think the simple answer is that you should not try to use made simultaneous multiple images on this computer, unless you can put more RAM in it.

• Two headphones can use the same ports? Or is there an exception with RAC?

  I was under the impression that the two processes of the listener cannot use the same port. But, how to scan LISTENER_SCAN2 and LISTENER_SCAN3 headphones use the same port 1628 in the RAC hump178 node?
  
  
  

  $ srvctl config scan_listener
  SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1628
  SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1628
  SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1628
  
  
  
  $ srvctl STATUS SCAN_LISTENER
  SCAN Listener LISTENER_SCAN1 is enabled
  SCAN listener LISTENER_SCAN1 is running on node humpy179
  SCAN Listener LISTENER_SCAN2 is enabled
  SCAN listener LISTENER_SCAN2 is running on node humpy178
  SCAN Listener LISTENER_SCAN3 is enabled
  SCAN listener LISTENER_SCAN3 is running on node humpy178

  These 2 listeners, according to the ouput srvctl above runs on the humpy178 RAC node that has 1 single public IP address. It's just a normal (standard) 2 node RAC configuration.

  Listeners in cluster environment using virtual IP addresses.

  You can check it out yourself:

  lsnrctl status LISTENER_SCAN2
  lsnrctl status LISTENER_SCAN3
  

• At the same time perform write and read

  Hello

  I use
  DAQmx NOR-USB-6259

  I have problem with parallel
  run the analog signal (for example 1000 points of writing
  by 1 second) channel Dev1/ao0 physics and at the same time read
  1000 points per second physics channel Dev1/ai0 1
  How to do this?
  I tried to use DAQmxExportSignal, but it does work well, or simply, I
  don't know how to do
  correctly maybe I should use a different
  the function?

  Best regards

  AndrzejS

  Hi Andrzej,

  Yes, it's possible, but with your device not at the same time, just with a little delay (about 1 US).

  The track is almost the same thing, you need to add 2 more channels of analog inputs to your task and use playback of multiple samples. Just check the VB Clk Acq - Int example.

  I can't help with particular code, because I'm not familiar with VB, but daqmx functions are very similar, if this change is 3 click in LabVIEW, then it must also be very easy in VB. You manage tasks, if your task contains more channels HERE you will receive samples of all channels.

  I hope this helps and let me know if I misunderstood something.

  Gabor

• CF8 and CF7 at the same time?

  Hello
  
  I'm running CF7 and I want to test and usually * CF8 before moving all of our code itself. It would be really useful to have installed and running on my local machine for this.
  
  Can I install CF8 and CF7 is still installed? And I'll be able to easily switch between the two so I can see the code that runs in both cases? I just want to use the web server integrated on my local machine, nothing complicated.
  
  I went through the other threads on installing CF8 after CF7, but none seem to answer to have installed and running at the same time. I could run on separate machines, but I would have preferred if possible.
  
  Thank you!

  Yes you can easily have both. They just cannot use the same
  Web server on the same port at the same time. Would be confusing.

  If you do not know how to connect CF to different web servers and | or
  the ports there is some learning to do.

  A common configuration is to have a version running on the integrated CF
  Web server on port 8300 and the other version running on a free IIS or
  Apache web server running on port 80.

• Ix2 Lenovo how to download several files/folders at the same time?

  Hey, my team and I use the Lenovo ix2 because most of the free services, we discovered can legally steal your work. We have a log of things back and wish I could just download it in one fell swoop. It is that none of us are qualified to layout network or ilk. Which brings me to my question:

  Currently if you add a file you can add is a file at a time. Is there a simple way to be able to download a bunch of folders with files in them at the same time?

  Hello dmurtha,

  Here is a link to our support page, where you can find the manual of your device:
  https://Lenovo-na-en.custhelp.com/app/home

  Once you have a mapped share, it essentially functions as a local disk.
  https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=how%20To%20Map%20A%20Ne...

  What this means to you is you can copy and paste, drag and drop, files or directories to the mapped share and everything in this file or directory is copied to.

• When you use the question mark, appears like a capital E with accent French and cannot use the quotes.

  Original title: I can't use my question mark (rises like a capital E with accent French and cannot use the quotes)

  I'm having a problem from time to time with my ability to use marks quotaion, brands etc. How can I treat it DEFINITIVELY the question.

  Thank you

  Hi golfnut11,

  1. you are using a laptop?

  2. you remember to make changes to the computer priro to this question?

  Step 1:

  If you use a laptop, check if the FN key is enabled. If so, then try to turn it off and check.

  Step 2:

  You can also try to check the keyboard on the screen and if the problem occurs or not.

  Check out the link:

  Type without using the keyboard (on-screen keyboard)

  http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard

  If you use a Microsoft keyboard, you can also consult the following article:

  Troubleshoot wired keyboards that do not or only the erroneous characters category
  http://support.Microsoft.com/kb/258826

  Hope this information is useful.

• I am trying to connect a Macbook Pro with Retina display for a new monitor Dell Ultrasharp 3014. I tried to connect via HDMI and DVI cable supplied with the monitor but the monitor says "no cable dvi - d".

  How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.

  Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.