Wizard Boot Camp 6.0.1 does not install Windows ISO 10? Application for USB?

Hey guys, so I bought this Mac Mini back in September and installed Windows 10 through an iso image on the subject. The problem occurred when everything started trolling. As I speak everything crashing... Same Finder. Then I reinstalled everything lost a part of my data because it does not transfer to the Back Up Hard Drive is correctly. Anyway, now I'm on El Capitan, and I can not install Windows 10 ISO images. He is constantly asking me to have a USB key where previously it was not.

Everyone knows these issues? I don't really have a USB key, a gigantic 5 TB hard.

1. in which year is the Mini?

2 yosemite and El Capitan differ by the BCA UI.

3 was W10 on-site as an upgrade of an existing W7 / W8 + installation using the ISO? Are now trying a clean install?

4. your Mac can use either an external optical drive or a USB key (or both) to install the W10.

Tags: Windows Software

Similar Questions

  • Changed the size of the Windows Boot Camp Partition - now merger does not

    My Windows partition was too large, so I used the scroll bar in Boot Camp to reduce its size.  Start directly on Windows (via system preferences) works very well.  However, I got an error message (I should have written it, but it didn't) when you try to start Windows using the merger.  I uninstalled and reinstalled the merger, but now when I start it up I got a message "no boot device found".  I would still be able to use the merger through the Boot Camp partition.  My thought is that the easiest way would be to completely remove Fusion, because the Boot Camp partition works fine on its own.  Apparently, the rest backout package still some files on the hard drive that caused the errors after reinstall.

    Any ideas on how to remove all traces of Fusion I can do a completely new reinstall?

    VMware Fusion of uninstalling/reinstalling will not solve this problem, and all you have to do is delete the partition Boot Camp package of Virtual Machine that is basically just meta-data and does not affect the physical Boot Camp partition by deleting.

    Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)

    ===

    1. If the merger is open, close it.

    2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.

    Note: This does not affect the Boot Camp partition install windows in that it does not remove it.  Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "

    RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines/Helper/naos-1.0.vmwarevm/vmware.log ' ~/Desktop/Helper_vmware.log

  • This PC HP Mini 110-1100 CTO range does not install windows xp home edition 32-bit

    the picture of the blue screen is just after said windows it starts up at the end of the windows xp installation. I checked the external hard drive in a hard drive enclosure and it is empty, too (not that is my problem... just something I noticed). The other pictures are of my bios. Also, the hard drive passed a memory test.

    Hello:

    You must install the driver for your laptop sata as XP does not have it when it loads all the drivers at the beginning of the installation routine.

    That's why it blue screens and can not find the hard drive.

    Please read the info at the link below, section of Intel. Then read the document on how to integrate all the drivers from Intel.

    http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

    Here's the link for the drivers, to integrate.  32 bit is the first listed download.

    http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18668&keyword=F6&lang=eng

  • Does not install Windows SP 2 for Vista

    Installation of service pack 2 Windows was not successful, error code 80070490 x appears, I tried several times to include too many disable my Norton Antivirus

    Hello

    "Windows Update error 80070490"

    http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490

    The Microsoft Information for the error code 80070490 is in 2 parts.

    1. download and install the Microsoft System Update tool

    http://support.Microsoft.com/kb/947821

    2 repair Windows if above does not correct the problem detailed in the first link.

    See you soon.

  • Automatic update does not install the update of security for Windows XP (KB2419632)

    KB2419632 will not install on my computer.  I tried to install it several times without success.  I get a 'General failure to install' error without characteristics.

    I downloaded the update (WindowsXP-KB2419632 - x 86 - ENU.exe) and tried to install it manually, but it fails when he tries to save the file "" MSADO15. "." DLL"in the folder"C:\Program Files\Common Files\System\ADO".

    The dialog box that opens is "Copy error" and said "Setup cannot copy the file msado15.dll.  Ensure that the location specified below is correct, or change it and insert 'Windows XP Sytem Files' in the drive you specify. »

    The file MSADO15. DLL exists in the directory above.

    In reviewing other positions, he requested information on the following security software:
    1 security Suite: McAfee Total Protection 2010 (current subscription)
    2. what McAfee, Norton never
    3. preliminary: do not remember, have always used McAfee.

    NOTE: I've never had a problem with an update of Windows until one.

    How should I proceed?

    See the section "How to get help" of http://support.microsoft.com/kb/2419632

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  • does not install Windows xp - upgrade of Microsoft SQL Server 2005 Express Edition Service Pack 3 (KB955706)

    Microsoft SQL Server 2005 Express Edition Service Pack 3 (KB955706) is not install via installation automatic or manual - ideas?
    Thank you

    Probably better to ask:

    SQL Installation of Server & upgrade
    http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/

    TaurArian [MVP] 2005-2011 - Update Services

  • Test the App Dev does not install o Ipad (test application)

    Hi there kdshjfk,

    It's easier to get a baby... (I know it)

    I had up to now configure all and as a next step, I wanted to test the application on the ipad.

    the .ipa file has more to download, I move and drped in the lib of Itunes, and for a moment I coult see Installing application on the ipad. But then he collapsed and said: impossible to install... wht could be the reasong, and should I do?

    Found this to be a problem with the UDID, Andrea spoke on the phone, all together

  • Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro

    Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro.

    I did Boot Camp with 8,1 this system successfully but the upgrade of Windows 10 dorked BootCamp upward when it is added to the system partition.  Has had a lot of work, but ultimately got all partitions disappeared and I tried Boot Camp and got it.  I erased the disc and then reinstalled El Capitan sweet factory without bringing more parameters.  Now, I still get the same error?

    I tried a few sizes of ~ 50 to 170 G with no luck.  It's on a MBP 2016 15 "with retina, 512G SSD, 16G RAM, GPU display.

    Any suggestions?  Troubleshooting?  I can't yet find/say if this thing creates something useful for a log file or?

    1. you download Windows Support software on a wireless connection? If so, try a connection cable, if possible.

    2. Please look in Applications-> utilities-> Console logs for error messages.

  • Windows Exployer will not respond in 'Normal Mode', in 'Safe Mode' or in 'clean boot '. "Fix it" even does not work. How can I fix this problem?

    Windows Explorer does not work in 'normal', in "Safe Mode" Mode or in "clean boot".  Same 'Fix it' does not.  How can I fix this problem?  I have Win 7, 64 bit.  Thank you.

    Hello

    1. do you receive any error messages?
    2 has there been any changes made on the computer before the show?

    Method 1:
    If this solves the problem, you can run check and the (SFC) System File Checker tool. SFC scan would be a system file corrupt on the computer search and replace.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    Method 2:
    If the problem persists, you can create a new user account and check if the problem still persists.

    Create a user account
    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    If the problem is resolved in the new user account, you may have corrupted profile.

    Here is the link for troubleshooting a corrupted profile, you can follow the steps mentioned in the link.

    Difficulty of a corrupted user profile
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    Method 3:

    If the problem persists you can scan your computer anti-virus using the Microsoft Safety Scanner.

    Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.
     
    I hope this information helps!

  • Pavilion p6310y/deskjet 1000: solution Wizard file sp68201.exe does not install

    HP solution Wizard file sp68210.exe does not install

    Hmmm, do you mean HP Support Assistant and SP68201.exe? As download it here:

    http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html#.VLdP_VLQNaQ

    .. .or here:

    http://h18021.www1.HP.com/helpandsupport/HP-self-support.html

    Whatever it is, if your computer meets the minimum system requirements and that you have trouble to install, you can download the MS file in a folder on your computer, right click and select run as administrator.

    Make sure that you uninstall the older versions from your computer. Also... If you have the version of the HP software on your computer, you open the HP Recovery Manager and go to the reinstallation of software to install.

  • Windows XP does not install the automatic updates.

    Original title: kopieerfout

    After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

    "

    ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

    Kan het bestand niet naar doelmap copying.

    Everything works OK.

    Thanks for your help

    Everything works OK.

    It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

    Free translation of message:

    "An error occurred during the copy of the file ntoskrnl.exe
    Cannot copy file to destination... »

    Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

    Try to load your "last known good configuration".

    The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

    If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

    Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

    If still no luck, you may need to restore the file ntoskrnl. exe as follows:

    1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

    2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

    3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

    4 - Select the operating system you want to set and enter the administrator password.

    5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

    6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

    7 - type exit to restart the computer.

    Hope this helps - good luck!

  • HP M1212NF software does not install or be detected if USB

    My laserjet M1212nf is not found when connected by USB. From the installation disc, it stops at "waiting for you connect the device. However, the printer will print, but it does not install the printing software. I need the software for the printer I need to scan in PDF format.

    I downloaded the drivers, changed the usb cord, so that everything is connected, repaired by the installation CD and rebooted my computer.

    Thanks - Rob

    This thread has been locked, for more information on HPPIW, please refer to the following support document:

    http://support.HP.com/us-en/document/c02681060

    HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

    To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).

  • Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. » __

    Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. »

    UM. I have no idea what that means, I never had that in my 20s I was using a computer.  Please help, someone!

    You can get the Chkdsk to run in the General Windows interface by following these instructions?

    Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive. If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

    Your command prompt Mode works without failure or a boot?

    Startup options (including safe mode)
    http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/default.aspx/KB/929135

    It works if you test with another user, you will need to create one to test with?

    System Restore and the System File Checker is able to fix anything?

    How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
    http://support.Microsoft.com/kb/936212/#appliesTo

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
    http://support.Microsoft.com/kb/928228#appliesTo

    Have you tested malware?  I see a lot of recommendations here for programs such as -

    Malwarebytes' Anti-Malware
    http://www.Malwarebytes.org/products/malwarebytes_free

    SuperAntispyware
    http://SUPERAntiSpyware.com/

  • Why is night launch does not install in Firefox 17, download site says it's compatible.

    launch of night does not install as anaddon in firefox 17 even though the download site says that it IS compatible.

    Hello

    What is NASA Night Launch? You can try checking the Firefox updates through software distribution Manager / Update Manager.

    If the problem persists, you can reset Firefox and leave with the launch of the night.

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

    If you want to take a list of Add-ons, changed the preferences/settings etc. to quickly reproduce the previous mode, please copy it to the Clipboard (to the left of the reset button) and paste in MS Office Excel, or OpenOffice/LibreOffice Calc or Notepad. However, it would be a good idea to check the existence of the number immediately after the reset.

  • Satellite P50-B-103 - Cyberlink Powerdvd does not install the update from Toshiba

    So I have an update for my toshiba Satellite P50B-103 for "cyberlink powerdvd" and it does not install, just to unpack and does nothing.

    I left the laptop to operate for about an hour to see if anything installed but it does not, what to do?

    Are you talking about the video player updated v 6.1.2.1 - A available on the Toshiba UE driver page?

    It is an update and requires the Player preinstalled (full version).

    After downloading, you will need to unzip the package (vidpl-20140813100353)
    Then, in the vidpl-20140813100353 package, you will find the TC30704300A.exe file.
    It is also a zipped folder. Right click on TC30704300A.exe and extract the files.
    After that, you will get the TC30704300A containing various additional files where you can start the update process.

Maybe you are looking for

  • Phone does not connect

    I have the latest version of iTunes and my computer tells me that I can not connect to my phone because I do not have.  Help.  I need my contacts are added.

  • Satellite A200-1AE: Toshiba hardware utility - "serial number is invalid '.

    Dear Sirs, I have install Vista Business on my A200-1AE (origin, it was the home of top). I have install all the drivers except TOSHIBA Hardware Setup Utility. Then I try to install it says 'serial number is invalid '. Help how to install it and what

  • UltraLiteJ and Eclipse

    Hi all I am trying to add the UltraLiteJ library to my Eclipse project. I performed the steps described here: http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/How_To_-_Compi... It works for normal libraries, but t

  • Musical keyboard in blackBerry storm Smartphones application?

    We are new to Blackberry and would like to know if anyone is working on an application for a keyboard musical about the storm, similar to what I-Phone comes with?  I suspect strongly there is a lot of music lovers who want to listen to music in their

  • Welcome to Smartphones blackBerry icons/symbols appear on screen in the bar below the time...

    When I get a new text message, there's a small envelope/symbol icon that appears that area as described above... What is this area called? And now I have this globe looking for icon/symbel on this area and I have NO idea what it means. And I can't fi