Wizard Boot Camp invites not to create the Windows ISO

Similar Questions

• Wizard Boot Camp can not be used. The Mac doesn't support Boot Camp.

  "Cannot use boot Camp Assistant. The Mac does not support Boot Camp. "What's the problem?

  ybshi wrote:

  "Cannot use boot Camp Assistant. The Mac does not support Boot Camp. "What's the problem?

  We have no idea. You don't not said us what model/year-computer you have. If I had to guess I have told your Mac does not support Boot Camp.

  Check here if your Mac supports Boot Camp: http://www.apple.com/support/bootcamp/

• Boot Camp install fails: cannot create the partition

  512SSD i7 MacBook Pro late 2013

  Boot Camp Assistant 6.0

  O/S 10.11.2

  true (paid for!) Windows 10 home

  Create USB boot exactly according to the instructions of the Boot Camp Assistant (time consuming)

  Re-partition Mac SSD in Colombia-British Deputy with 60 GB for windows partition

  Restart the system and boot of Windows Setup

  Enter the key to victory, everything works fine

  When you choose which partition to install windows, select 60 GB

  Installer of Win said partition is not formatted correctly, so I use the formatting tool in the installer

  Formatting tool seems to work but removes the volume name: it was Boot Camp and becomes Untitled

  60 GB re partition - select an installer says "failed to create the partition" or something similar

  Installer refuses to go forward and the only way out is to leave the Setup program

  Mac to Mac o/s boots

  Tried a couple of times and always the same result.

  Someone has an idea what I am doing wrong? I'm just following the instructions of the Boot Camp Assistant...

  This is the case, if you have any other than the USB storage and storage internal connected.

• Boot Camp does not start after the upgrade to Sierra

  I can still access my Bootcamp partition via Parallels, but is no longer an option to boot at startup.

  What is the year/model of your version of Mac and Windows?

• Boot Camp can not install Windows because of the formatting?

  I have a 2012 MacBook Pro (500 GB to 8 GB memory storage) with the OS X 10.11.3. I try to install Windows 8 Pro (64-bit) using Boot Camp. When I restart my computer after creating the partition, I have two USB ins journal. They say Windows and the other says Boot EFI. When I click on the option of Windows, I am taken to a screen that says that there is no bootable disk and restart with an inserted. When I click on Boot EFI, I did get into the Windows partition and can start set up for installation, but when I get to the stage where it asks me to install Windows, none of the listed drives are able to have Windows installed. I have a list of 4 disks, all drive 0 and then partition 1,2,3,4 respectively. 4 is the one that is 46.6 GB (I created Windows to be 50 GB), so I guess it's that I need to be installed in. However, when I click on any of the partitions, this message appears: "Windows cannot be installed to this disk. The selected disk is a MBR partition table. On EFI systems, Windows cannot be installed to GPT disks. Windows cannot be installed to this disk. Hardware may not support booting to this disk. Ensure that the disk controller is enabled in the computer's BIOS menu. "After talking with the Apple support (who told me it was a matter of putting in the form any and to talk to the Windows how do I reformat) and Windows support (who took the opportunity to remind me why I had stopped using them in the first place), I think I have a better idea of what it means , but I have no idea what to do about this. Anyone have an idea how I can fix?

  You have two choices.

  1. use GPT Fdisk to delete the MBR and continue boot EFI. Later, it is problematic when you install the drivers for the Apple hardware.

  2 use a USB2 flash drive and let BCA create setup of USB and partition your drive. No matter what Manual partitioning or manipulate the installer USB can cause problems.

• Boot camp do not restart in Windows install

  Hello. I'm trying to install Windows 10 on my early 2015, 13 "Macbook Pro, El Capitan. Wizard boot camp through partitioning and rebooted, but it restarts in OS X and not in the installer of Windows. The ISO was downloaded directly from the Windows website without problem (Win10_1511_2_EnglishInternational_x64, 4, 46 GB of files). When holding down the option key when starting key only the Macintosh HD does, no view of the BOOTCAMP partition even if it is visible under storage.

  My Macbook is the most expensive thing I own so I would avoid the bricking of her if possible, I would be grateful if someone could guide me through this. I desperately need Windows installed so everything just do not solve this is not an option. I've attached a screenshot of the partition under storage, although I don't know if that would be any help.

  

  See the disk utility:

  

• Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro

  Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro.

  I did Boot Camp with 8,1 this system successfully but the upgrade of Windows 10 dorked BootCamp upward when it is added to the system partition.  Has had a lot of work, but ultimately got all partitions disappeared and I tried Boot Camp and got it.  I erased the disc and then reinstalled El Capitan sweet factory without bringing more parameters.  Now, I still get the same error?

  I tried a few sizes of ~ 50 to 170 G with no luck.  It's on a MBP 2016 15 "with retina, 512G SSD, 16G RAM, GPU display.

  Any suggestions?  Troubleshooting?  I can't yet find/say if this thing creates something useful for a log file or?

  1. you download Windows Support software on a wireless connection? If so, try a connection cable, if possible.

  2. Please look in Applications-> utilities-> Console logs for error messages.

• Boot Camp can not detect Windows software support

  Hi guys!

  1. I have a question, I started my bootcamp and pressed the 2 first options and clicked on continue:

  http://postimg.org/image/9mly0tvjl/

  2. that's what I did to "2." step. I chose the iso file of Windows 7 Home Premium and boot camp agreed and loading all fine!

  http://postimg.org/image/tg97p5fu5/

  3 and now it was time for step 3:

  http://postimg.org/image/554gf7i3x/

  After Boot camp let me decide how many GB, I want to save for Windows... I got 500GB (half) and clicking 'Install'... but the problem is here...

  It is said that: "Boot Camp can not detect Windows supports software.." and so on.

  Where do you think the problem is? Is - this problem on the ISO file?

  I would appreciate any kind of help,

  Thank you.

  What year/model is your Mac? Please see step 11 in install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

• Install boot camp drivers not entirely

  At first I have problems with igdkmd64.sys, then I reboot to win and to reinstall the boot camp drivers. Probably all the drivers been installed except audio drivers. I have no audio output settings.

  I try to only install the audio drivers, but it has not been installed.

  What version of Windows? Do you have any unknown devices in Device Manager?

• Boot camp does not start windows 7 alley

  I have the following Setup: Windows 7, Mac OS X Lion 10.7.3 and Boot Camp.

  The only thing I did was Boot Camp Manager to select Mac Windows as boot drive (at the time there was only 1 icon visible in the window, not the 2 that you expect!) (1 for windows and 1 for OS X).

  After the start of Mac I can't get back into Windows more. Now the ALT/Option key does not work, I do not receive the start of disk icons, he begins just to Mac every time. Configuration screen/boot that Mac disks is also visible.

  But if I run the Boot Camp Assistant, it gives me the opportunity to remove from Windows 7, it seems that Windows 7 is here!

  Here is the output you'll probably ask, from the following commands:

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  diskutil list:

  / dev/disk0

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: EFI 209,7 Mo disk0s1

  2: Apple_HFS Macintosh HD 250,6 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft data base 202,3 GB disk0s4

  Cs diskutil list:

  No logical volume group CoreStorage found

  sudo TPG - vv - r see the/dev/disk0

  See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1953525167

  start index size summary

  0           1                         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 489531248 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  489940888 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  491210424 1067110728

  1558321152 395202560 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  1423 1953523712

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  sudo fdisk/dev/disk0

  Drive: / dev/disk0

  geometry: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AF 1023 254 63 - 1023 254 63 [409640-489531248] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [489940888-1269536]

  4: 0C 1023 254 63 - 1023 254 63 FAT32L Win95 [1558321152-395202560]

  I hope you can help me trouble Boot Camp and give me access to windows again!

  Kind regards

  Marijn

  Resize you your Windows partition?

  Can you use El Capitan has deleted my windows bootcamp partition as reference and download Testdisk and GPT Fdisk and run a scan of Testdisk and a quick search.

• computer does not start after the Windows XP logo window

  Windows xp home edition
  service pack 2
  Dell inspiron 1501

  1. computer does not start after the Windows XP logo window
  2 works well in safe mode, even connect to the external monitor
  3. I reinstalled xp many times, problem stil exist.

  All the answers?

  Hi dhanushm,

  1. What happens after the Windows logo screen?
  2. You receive an error message?
  3. You have security software installed on the computer?
  4. Have you performed an installation clean Windows XP and even after that this problem exists?

  Method 1

  As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• I have a PIPO W3f 10.1 inch Android 4.4 + Tablet PC in Windows 8. It is a Tablet dual boot. I'm stuck on the Windows 8.1 with the side Bing with an 0xc0000034 error code.

  I have a PIPO W3f 10.1 inch Android 4.4 + Tablet PC in Windows 8.  It is a Tablet dual boot.  I'm stuck on the Windows 8.1 with the side Bing with an 0xc0000034 error code.  I have tactile and available USB.  Any help would be appreciated!  Also, once I get Windows running again how do I start to Android?  This option is missing.

  Hello

  Thanks for posting your query in Microsoft Community.

  This problem may be due to a corrupt or damaged files in the system partition or boot record that are required for Windows 8.1 start successfully. You may need to run the automatic repair of Windows 8.1.

  However, I would recommend at this point, contact the manufacturer of the Tablet for the best support possible, since you use dualboot.

  Please respond to this topic, after you talk with the manufacturer so that we can continue to research the issue and help you accordingly.

  Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

• HOW TO CREATE THE WINDOWS MODEL

  Dear all

  I'm new to the ESX Server do not know how to create the window model in EX Server I mean customer infrastructure. So that I can do a lot of copy of windows from this model.

  Kindly help me to solve my problem step by step.

  Thank you

  Malik Adeel Imtiaz

  NetSol Technologies

  Hello

  Create a new virtual machine in Virtual Center - install the software updates that you need in this model etc etc.

  Click right of the virtual machine when you finished and chose "convert model', if you need later update it is again you can 'convert virtual machine' and update before make you a model again.

• Why the clip will not play in the window of the observer?

  Hello world. It's me again. So, I just started working on a project, and the clip will not play in the window of the observer. In the timeline panel, I see that there are images to play, but the Viewer is black when I try to play. I have temporary can solve it by leaving FCPX and opening it again, but after a few minutes, the display window stops again, and it's a pain to have to do every time so I can watch a few minutes of film. Just so you guys know, do it mode multi-cam, incase that has an effect on it. Thank you very much!

  You have the options of display Angles show the value? You are in the editor of the Angle or the project timeline?

  Russ

• surcurity essentials does not start, and the windows firewall does not illuminate

  Hello

  I have a problem, he seems to have had a virus on my pc. Essentials of security does not illuminate and the windows firewall will not also turn on, I tried to use the tool to "fix" windows and it doesn't solve the problem.

  the original virus seemed to rename its self as a program existing and renamed the oringinal by a space in the name, for example "adobearm.exe" became "adobearm .exe" there is a space before the dot.

  The virus called his free adobearm.exe icon because it is a yellow / orange with a letter H, at the Center

  different file name her seemed to be part of the virus included "ag7yl5x8.exe".

  If you tried to close them in the task manager that they just either came back or a different file name would appear in the list.

  I also couldn't do a windows update, but I think as the tool to 'fix' as cured this problem.

  Can someone help me please.

  Thank you

  PS can't do a restore either

  I start here, THEN difficulty any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.