Wizard upgrade said platform not supported on the upgrade of windows 8 on xp pro 32 market sp 3
Hi all, it drives me crazy.
I just checked the BIOS settings and the XD card was already activated.
Tags: Windows
Similar Questions
-
iPhone 6
Network: Verizon
iOS 9.3.3
Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:
"your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »
or:
"The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »
My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,
Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.
Apple says call Verizon. Verizon said, you guessed it, call Apple.
When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.
What is going on?
kennypg wrote:
iPhone 6
Network: Verizon
iOS 9.3.3
Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:
"your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »
or:
"The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »
My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,
Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.
Apple says call Verizon. Verizon said, you guessed it, call Apple.
When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.
What is going on?
I think it's a problem with Verizon.
Our company is on AT & T - and our lawyer have travel all over the world, Africa, London, South East Asia and they have never complained to me than before.
-
Just bought a Nikon D7200 camera. Had a D7100. 11 of the components support the camera. Using of 11 items, the D7200 will not import the RAW files. I can't go to 14 items because I have Windows Vista... 14 platform not supported by Vista. Looking for something for me to 'trigger' with a new computer due to the fact that Vista can not do a bunch of stuff, so I ordered one with 14 elements. @ I understand that 14 elements does support the Nikon D7200 because it comes with Camera Raw 9.1. Is this correct?
Yes PSE13 or PSE14 will support the D7200
-
Firefox 3.6.3 is not supported by the Google Font API
I have Firefox 3.6.3 on my Macbook, but is only detected as 3.0.1on this form. When I have the link to the Google fonts site, he said, "we're sorry, but your browser is not supported by the Google Font API. To browse the fonts in the fonts directory Google please switch to a browser more modern. "I have to use Safari to access the page.
URL of affected sites
http://code.Google.com/WebFonts
Maybe this article will help you - sites say that Firefox is obsolete or incompatible, even if it's the latest version
-
Open automation: function not supported in the current target.
I get the error of the said above when you try to use the function of automation open on a target FPGA Compact in RIO. This function is not allowed on these objectives? Is there a way around it?
Thank you
Mosteiro of Pablo
Princeton University
The open VI automation creates references to ActiveX objects, these are not supported on the target FPGA. You should use these functions on your host processor. The FPGA VI is intended for communication with your e/s and high speeds.
-
ORA-12028: type of materialized view is not supported by the main site
Hi guys!
We face a problem these days about the materialized view.
We have upgraded database version 9.2.0.7 directly to 10.2.0.5 (RHEL4 x 86) on the same host. Database uses the driver dg4odbc to connect with remote SQL Server 2012 through data binding called MIKSERI. Our developer team would like to have replicated SQL server table data side Oracle using the materialized view.
They created Materialized view, but it is not at all to refresh the data. I tried to study a little bit, and whenever I try to change the view anyway I hit error:
ORA-12028: view type is not supported by the master site materialized @ 'MIKSERI '.
ORA-06512: at line 22
I looked at the solutions proposed and discovered that it is maybe the compatible database parameter, so I changed from previous 9.2.0.0.0 to 10.2.0.1.0 but still no luck. Just to emphasize this database is of course different clone of production to a different database, with db name retained and other parameters, but on another host computer and listening port. I even try to change global name, but still no luck.
Main problem is that refresh the work does not at all. To be more precise, we have created MV on the side of the Oracle and FULL Refresh should be done every 3 minutes. MV uses HS db link to the sql server database.During the creation of MV, we can see currently given to sql server, but the problem is that we cannot do MV to refresh every 3 minutes. When I try to change MV and put the refresh interval I get above error.
Any kind of help would be greatly appreciated,
Thank you
I found the reason why my MV update jobs failed, job_queue_processes parameter was equal to 0. I change this setting and now works fine.
Thank you for your time!
-
I get an error when I try to open my photos in photoshop cs5. the file seems to be a model of camera that is not supported by the installed version on camera raw, he said. Please see the documentation of camera raw for more information.
What should I do?
Generally help > updates can do for you and it is important to get all the updates for CS5 in.
If it fails, update Adobe Application Manager and let me know how it goes.
You can find the update here: other downloads
-
language/platform not supported
Hi all
I am trying to download and install Adobe Acrobat Pro XI from an online subscription.
I get an error message that I am on a platform not supported language /, but I respect all requirements. Can someone help me solve this?
I had a trial version of Pro XI downloaded and worked fine before you buy.
Thank you!
Unfortunately the system requirements for Adobe Acrobat Pro XI do not include Windows Vista.
------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ --------------------------------------------------------------
http://www.Adobe.com/products/acrobatpro/tech-specs.html
Acrobat Pro XI system requirements
These system requirements are for the software Adobe Acrobat XI Pro v11.0. Because the system requirements change with each software update, see the Release Notes for the version of your software for the latest information on supported operating systems and browsers.
Windows
- 1.3 GHz or faster processor
- Microsoft Windows XP with Service Pack 3 for 32-bit or 64-bit Service Pack 2; Windows Server 2003 R2 (32-bit and 64-bit); Windows Server 2008 or 2008 R2 (32-bit and 64-bit); Windows 7 (32-bit and 64-bit); or Windows 8 (32-bit and 64-bit)
- 512 MB RAM (1 GB recommended)
- 1.85 GB of available disk space
- screen resolution 1024 x 768
- DVD-ROM drive
- Internet Explore 7, 8, 9 or 10; Firefox Support XR; or Chrome
- Video hardware acceleration (optional)
Note: For 64-bit versions of Windows Server 2003 R2 and Windows XP (with Service Pack 2), Microsoft Update KB930627 is required.
------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ ----------------------------------
The trial Installer is self-contained. The setup of the subscription/create cloud is different.
-
Adobe flash plugin not supported in the e bike 2nd gen (xt1506)
fix Adobe flash plugin not supported in the bike e 2nd gen (xt1506) please.
Nothing for Mozilla to difficulty. The phone uses a quad-core processor, in which the discontinuous old Adobe Flash player 11.1.x does not support because he can't stand of the ARMv7 processor.
-
SIM card is not supported in the activation
I have a question about activating my iPhone with a different SIM card. I have an unlocked iPhone and I tried to use another (of another carrier) SIM card with it. However, the phone will not turn on and I got an error message indicating that the SIM card is not supported by the initial activation and it isn't a hardware problem. He advised me to call my carrier. So I called my operator and the customer support agent has confirmed that my iPhone is indeed open. Now I'm really confused as to why the other carrier's SIM card is not supported. All SIM cards I've tried with my current provider works with my iPhone. All other SIM cards from other telecommunications companies does not work (I tried 3 others).
Then the phone is not unlocked. Have you asked an unlock of your carrier and they gave him? If Yes, do restore you the phone to factory with iTunes and receive a "congratulations, your phone is now unlocked" message? If this isn't the case, then the unlock code is not complete. You must restore the device with iTunes at the factory, not a backup. When you get the message "Congratulations", you can restore your backup.
-
The sim card that you are currently installed in this iPhone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server...
Can anyone helpe me...? My phone is locked to O2, but since June 2013 is factory unlocked. Contact O2 for more information, and the answer was: "is everything okay". My phone is now unused, but the sstrange thing is that I can receive phone calls
-
HTTP: Error 58 (the network function is not supported by the system)
Hi all
I have a problem with HTTP Client in LV 2011 functions.
As you can see in the screenshot attached, I try just:
-Open a handle-> no errors
-Send a web request using the GET method-> error 58
-close the handle
The problem is that a 58 error: "the network function is not supported by the system. However, it works fine when I type the same URL in a web browser.
You have any idea of what could be the problem? Thank you in advance for your help!
J.
I have fixed the bug: there was a white at the beginning of the URL... (!!!). I deleted the empty character and now it's OK.
-
Dear Sir.
Nice to meet you.
When I run the SMU-4141 "Adjust voltage Leve.vi niDCPower Cal" calibration function niDCpower version 1.8.
It shows an error "function of calibration is not supported by the device." (false cae)
But if I run the calibration function SMU-4141 "niDCPower Cal Adjust voltage Measurement.vi", (real deal)
It will work.
See attachments.
My equipment list:
Windows XP SP3
LabVIEW 2011
niDMM 3.0.5
niDCpower 1.8
PXI-1073 case with 2 cards.
SLOT2: SMU-4141
slot6: PXI-4071
Could someone tell me the solution?
Hi Peter,.
The calibration process indicates that the call of the function of voltage adjust NI - DCPower Cal calibrates both the output level of the device as well as the ability to measure of the device. It is even for the Cal of NOR-DCPower function adjust a current measurement.
You must perform a calibration automatic on the device prior to the initial audit of the device, before the adjustment process and before the final verification process.
I'm not sure I understand your question very well. Please let me know if I have not responded sufficiently.
-
EtherCAT: "found a module not supported on the slave device"?
Hello
I have a CompactRIO system that uses of slave hunts EtherCAT (cRIO-9081 + cRIO-9144) when I tried to deploy my settings, I got this message:
Found a module not supported on the device slave address 0: 32445 slot
What does that mean? (I have several slaves Garland, but of course, I don't have that many slot machines!) The chassis that has been reported with a red exclamation point contains these modules:
- NI9201
- NI9203
- NI9265
- NI9421
- NI9481
Is one of them unsupported on EtherCAT? If so, is there a list of modules taken into charge/no supported somewhere?
Thank you!
Hey there,
I think you'd find this knowledge base, http://digital.ni.com/public.nsf/allkb/CA3A1D2166A4591386257514007A0F9C?OpenDocument , useful. It would be better to check what version of DAQmx you use and check the readme associated for compatibility or verify this DeveloperZone, http://www.ni.com/white-paper/10462/en. I hope this helps.
-
Hello HP,.
I have a laptop CQ58-bf9WM, which had Windows 8.1. The 320 GB hard drive died and bought a new SATA 500 GB laptop. had no CD recovery, went online, enter all the important information, serial No., model #, then purchased through HP recovery disk, received the CD (manufacturer 708896-001, 708895-001 708897-001) and put #1 disc in the CD started and that's what I get: this computer is not supported by the system recovery media. You will not be able to continue to recover this system with these media. "Error: 0100-169-1855-188 b" then you have the OK, then when you press OK, the laptop shuts down. I pressed ESC on POST, then I tested memory and the new hard drive and they both passed. HELP PLEASE! Thank you
Should not have anything to do with the new hard-both disk that is at least equal or greater than original ability, they work. It is 'possible' that you have received the wrong set of recovery.
Thing of OE to check. Enter the BIOS by pressing F10 immediately after turning on (have to press ESC, then F10 to the menu). Is the serial number, model number.etc all intact?
Maybe you are looking for
-
I forgot my windows XP administrator password and the returned solutions "access denied."
I tried all of the following without success. Since your account invited > start > run Type "cmd". Once command prompt opens type NET user comments / add an administrator Press enter It works on computers pretty much all that I tried, it elevates the
-
Unknown error while printing photo
While trying to print any photo from the Explorer or Windows Photo Gallery, I get an unspecified error and can not print. The error message says "the following error has occurred when trying to print your photos" and no other information. The messag
-
Compaq nw8240 driver external monitor for window 7
I upgraded from XP to Windows 7 and I can't use my external monitor. Does anyone know what driver should I download for my Compaq NW8240. Thank you for your help in advance
-
Audio works everywhere except in games.
I recently got the X 51 Alienware desktop computer and I have audio problems. I installed a few games video and sound works in the start videos but it stops once I reach the menu and remains off during the game as well. Audio works for everything els
-
Can the boost loan process be rolled back so that I can still use my USB key to store data.