WksSS.exe error Help!

Similar Questions

• I can't install WGAPluginInstall.exe error 0 x 80070003 help

  HI the FRIENDS MY SYSTEM IS SICK, I CAN NOT INSTALL WGAPluginInstall.exe ERROR IS 0 x 80070003 I CAN'T DOWNLOAD ANY FILE WITH DOWNLOAD MANAGER (CONNECTION WITH the SERVER IS LOST) I CAN'T OPEN the DOWNLOAD of PAGES WEB BROWSER VIEW WITH BROWSER WEB MY ANTI VIRUS IS up to DATE I am not CONFUSING WHAT IS THE PROBLEM

  Amin,

  Remove the download directory and then to return to the update sites. to do this, follow these steps:

  1. stop the automatic updates service. to do this, follow these steps:

  a. Click Start, click Run, typeservices.mscand then click ok.

  b. Automatic Updates service right click and then click on stop.

  c. minimize the software component services snap-in.

  2. rename the c:\Windows\SoftwareDistribution directory. to do this, follow these steps:

  a. Click Start, click Run, typecmdand then click ok.

  b. type cd %windir%, and then press ENTER.

  c. type ren C:\Windows\SoftwareDistribution SDTemp, and then press enter

  d. type exitand press ENTER.

  Note when you delete the folder % windir%\softwaredistribution, the history list is erased from the section "review updates" site web windows update. This action will not affect the updates installed on your computer. subsequent updates will appear in the history list.

  3. start the automatic updates service. to do this, follow these steps:

  a. expand the component services snap-in.

  b. right click on updates service automatic and then click Start.

  c. close the window of the software component services snap-in.

  4. visit the website of windows update, the microsoft update web site or the server wsus again and then download an update.

  5. If you still receive the same mistakes, make sure you have correctly completed steps 1-3.

  6. If you can't always install the update, see the following microsoft knowledge base:

  http://support.Microsoft.com/kb/906602/ installation problems troubleshooting windows update, microsoft update and windows server update

• mscorsvw.exe error

  While my pc was going through updates to MS, he projected blue.  After the reboot, I now get mscorsvw.exe error

  Hi frank platt,.

  What the full error messages you found?

  After return from error messages full so that we can help you better.
   
  I suggest you to reset the Windows Update components. Then try to install an update at a time and checking update problem. After return to status so that we can help you better.

  To reset the Windows Update components visit the link below and click on solve this button / follow the given steps to repair it yourself.
  http://support.Microsoft.com/kb/971058

  Hope this information is useful.
   
  Umesh P - Microsoft Support

• Daemonu.exe error turns off my computer. How do fix?

  Often, I get an error message after my computer shuts down-Daemonu.exe error.  Is there something to fix this problem?  Thank you.

  Hello

  It's the Nvidia Update Manager, so you must check with their Support and Forums.
  Would be a good idea to update the driver or re - install the last longer if not recent exists.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• In Windows Server 2003, I got the following error "svchost.exe - error on line 392."

  In Windows Server 2003, I got the following error "svchost.exe - error on line 392."

  Kindly help.

  Hi Sophie,.

  Your Windows Server 2003 issue is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• application spoolsv.exe error.

  I have windows xp and I get the application spoolsv.exe error. It gives me the following message is displayed: the Instruction at 0x01fb0374 referenced memory at 0x1fed12c0 memory cannot be read. "I don't know what to do about this.  Help, please.  * E-mail address is removed from the privacy *

  Hello

  1 did you change on your computer?

  2. what service pack is installed on your computer?

  3. when exactly did you receive this error message?

  4. What is the brand and the number of the printer model do you use?

  Method 1:

  I suggest you try the steps suggested by Anthony - Support Engineer from the below mentioned link and check if it helps. These steps are for Windows Vista and should work as well on Windows XP.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/spoolsvexe-application-error/0a7b0b15-77b3-4a8f-9465-dff8517c226e

  Method 2:

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

  http://support.Microsoft.com/kb/810894

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,

  Method 3:

  I also suggest you to follow the link and check.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  See also:

  How to cancel printing or to delete a print job that is stuck in the print queue in Windows XP

  http://support.Microsoft.com/GP/pc_print_methoddstoptheprin

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• trl120.bpl/Setup.exe error updating panda internet from 2011 to 2012

  Tried to update my panda internet between t0 and 2011 2012 and I sysytem mechanic.now I have the app missing rtl120.bpl and he says panda has stopped working I tried to re - install panda from the disc, gets most of the setup.exe error then made way. Thanks for reading. (email removed for privacy)

  Hello

  I would like to do you right click on the file setup.exe and run as administrator.

  If this is little help, contact the manufacturer to better aid.

• Explorer.exe error of Application the Instruction at '0x7c910ed2' referenced memory at 0x03ede088.

  always get this when I try to open certain files? any suggestion will be good?

  Explorer.exe error of Application the Instruction at "0x7c910ed2" referenced memory at "0x03ede088", the memory could not be 'read' click OK to terminate the program, click CANCEL to debug the program

  I also have error of Application Explorer.exe the Instruction "0x7c911689" referenced memory at "0 x 04180000", the memory could not be 'read' click OK to terminate the program, click CANCEL to debug the program

  Good.

  Not sure what it is yet, but you know what it is not.

  I don't know what to think of your permissions problem, but if records are read-only and not meant to be, are you not able to change the folder properties and what happens when you try to do?

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
  You can Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on.)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to act normally, you'll know that some extension you just disabled in this group of 3-5 is the culprit, then you can start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.

  Disable them one at a time or in small groups (to make things go faster) until your right click does not generate an error, and then restart and try again.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• ZSMCSNAP.exe error message!

  Whenever I boot Windows XP, SP 3 "zsmcsmap.exe" error message is displayed. Please help to get rid of it.

  Yes you can. Your device may be defective due to a corrupted driver or faulty and if that is the case, you should see an indication of that in Device Manager.

  Go to Device Manager by clicking Start, run and type "Devmgmt.msc" in the Run dialog box and click OK. Scroll down to find the entrance to the USB camera, expand by clicking the '+' sign. There should be one. "X" or a"?" next to the device.

  If you are still interested to install your camera, you can find the correct driver for it on the site of the constructor in the link below.

  Vimicro support.

  http://www.Vimicro.com/English/download_n.htm

  If you don't, remove the usb, the return device in Device Manager, and then uninstall it.

  Let us know if there is anything else, we can help you.

  Good luck.

• winver.exe error, error code "winver.exe 0xc0000005 application error".

  Title original: winver.exe error

  I had this problem "application error 0xc0000005 winver.exe".

  someone knows how to fix this?

  Hi Helel,

  1. When you get this error message?

  2 have you made changes to your computer recently?

  I suggest you to follow the steps and check if it helps.

  Method 1:

  Step 1: Start in safe mode and check if the problem persists or not.

  A description of the options to start in Windows XP Mode

  Step 2: If the issue is not reapper in safe mode, perform a clean boot, and then check that it helps if you can skip this method.

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure you perform the steps in How to configure Windows to use a Normal startup state to start your computer normally.

  Method 2: Run the System File Checker scan and check if it helps.

  File system (CFS) Checker

• How can I fix a svchost.exe error 'Ox7c919af2 '?

  I get a "Ox7c919cf2" (.. .referenced at "0x00000010") svchost.exe error each time I restart my computer.  Debugging doesn't fix it, even if it offers me the option on the popup error message! I looking for viruses, downloaded and executed the TDSS Killer of root and more (to hunt hidden malware/viruses), and the computer "seems" to be happy. I hope that the error message is simply related to a problem of program or something (unlike last time, where he mentioned that I had a virus), and someone has a simple solution (KB?), I can apply to fix.  It will save me another $200 if it is not infected again!

  System = Win XP, 32 bit, Media Center, HP Pavilion, Office 2007 Pro (used at home).

  Let me know if you need more info on the problem before answer you please, if I get any effective suggestions to try to fix it.

  Thank you!

  Dharma

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/when-XP-is-starting-up-getting-error-the/d83e5e87-1fbb-4FE7-bb61-4c5969f302cc?msgId=bc2028d8-6AA5-494c-a4d2-85c99753d12a

  It will be useful.

• Error occurring-re: application to 0x001a624b svchost.exe error

  I get this error message:

  problem svchost.exe application to the 0x001a624b error

  If I kill the program I can't open anything. Choose Debug does not either; nothing happens, but I can always open programs. The error message is displayed after a certain time once I have press cancel. Restart in safe mode to freeze after a minute before the start screen.

  I tried this:

  http://www.pchell.com/support/svchosterror.shtml

  But it does not work. So, I tried a system restore. Has no when it does not restart correctly. Also I can not access the internet and I was led to believe that the card has been uninstalled on the motherboard because of any deleted graphics card nvidia card. I don't know if that's true, but I lose the internet after that happened.

  In summary:

  Crashes in Mode safe

  Re-occuring svchost.exe error

  No internet!

  Cannot restart properly

  Cannot do the system restore.

  Any ideas what I could do? If there is nothing so how could I go about upgrading to a new OS?

  Run Malwarebytes in safe mode as suggested.

  The following link explains (if you can understand what that means?) Event ID: 63.

  http://support.Microsoft.com/kb/891642

  Hope this helps, Gerry Cornell

• Error - app fails to load (forcefield.exe) error 0xc000034 to start Windows XP.

  Original title: 0cx000034.

  Windows xp pro. all KB (130 or almost). I've stalled zonealarm 9-3-037-000 and is unable to contact the update server. I have this problem at the start of this application fails to load (forcefield.exe) error 0xc000034, press (x) to continue. Za tech has the slightest idea why. Technical support told me to do evervthing, I does not. They never say why I get error at startup. W the dose the average of the error and how to fix

  Hi Ray,

  It seems that ZoneAlarm has not installed correctly.

  I recommend you to uninstall ZoneAlarm completely using the removal tool and check if the problem persists.

  Subsequently, you can re - install software ZoneAlarm .

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

  I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

  Hi A1W1LL,

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

  1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press any key when the message "Press any key to boot from CD or DVD".
  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  4. click on repair your computer.
  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
  6. in the System Recovery Options dialog box, click System Restore.
  7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
  8. click Finish to restore the system.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• NTVDM.exe. trouble message I said: "16-bit MS-DOS subsystem" then C:\Windows\sustem32\ntvdm.exe error while setting up environment for the application

  I can not also with ntvdm.exe. I'm no computer expert. The message said: "16-bit MS-DOS subsystem" (this on the header of the window). Then the message is C:\Windows\sustem32\ntvdm.exe error when defining the application environment.

  I already did a sfc/scannow and Windows Resource Protection did not find any breach of integrity.

  I'm trying to run an application on this website http://www.ray-ban.com/international/science/virtual-mirror.

  I'd appreciate any help.

  Best regards

  original title:ntvdm.exe. disorder

  Hello
  You are able to use your applications without problem?

  To check what is causing the problem, try the following steps:

  1:NTVDM method is bound to display drivers for nVidia.I suggest you to update display drivers on the manufacturer's Web site

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Clean boot

  Put the computer in a clean boot (namely if any third-party software hinders the process)
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
  Continue with the remaining steps to pin-point on the third party service.

  Note: After you find the program causing the problem, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup.

  3:Disable method and then check the firewall/security software on the system tray.
  Note: Activate the security software after the test