WLAN controller

Similar Questions

• WLAN controller download

  Hello

  I bought a new controller (model 2500) Cisco wlan and a point of access from a provider certified Cisco. Can I register the controller on the

  Site Web of Cisco to enable access download software associated with this controller? I want to download the latest version of the software "AIR-CTVM-K9-8-0-100-0.aes".

  but I'm not allowed according to my profile.

  So, how can I access the latest version of the software for my 2500 WLAN controller?

  Concerning

  Gideon

   Can I register the controller on the Cisco website to enable access to download software related to this controller?

  Yes and no.

  The quick answer is no. your authorized reseller of Cisco should be able to "join" the serial number of your WLC in your Service Agreement and your Service agreement is attached to your CCO login.

  If you go direct to Cisco, it will take time to get to the bottom of the details, you need to provide a lot of information so it's best to get your Cisco reseller to contact them.

• WLAN controller redundancy

  What is the method to provide redundancy to the WLAN controller

  the function?

  The unified access point allows a backup controller WLAN? In this case, the configuration of the two controllers is automatically synchronized?

  Hi Andres,

  The world of WLC is how an AP is covered in case of failure of a WLC. It is not without some "down time" in case of failure, but two controllers are active. You must keep in mind that the AP cannot be certified a WLC both so it of the best you can do when a WLC fails AP then must re - register with the backup, it is not a process completely seamless.

  This has some really good info;

  WLAN controllers to access tipping points light Configuration example

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a008064a294.shtml#C4

  For more recent versions of release WLC (there are also)

  Controller LAN wireless and lightweight external Tipping Points access the sample Configuration of mobility group

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a00809817ca.shtml

  See you soon!

  Rob

  Thank you to support CSC helps Haiti

  https://supportforums.Cisco.com/docs/doc-8895

  https://supportforums.Cisco.com/docs/doc-8727

• Inconsistent WLAN controller with AP 'AIR-LAP1142N-E-K9.

  Hi all

  We have awireless LAN Controller "Cisco 4402 with software version 3.2.150.10" we use the Access Point 'AIR-LAP1242AG-E' and his works fine, we bought the new APs with the model "AIR-LAP1142N-E-K9" but its not working with our controller and restart continuously. I connected the console and checked the logs from the console that is given below. Please let me know is this controller WLAN is compatible with the APs new or not, or do I need to upgrade the operating system of the LAN Controller and if I upgrade the operating system of the WLAN controller it will support the old APs or not.

  Thank you in advance for your response and support.

  32K bytes memory simulated by flash not volatile configuration.
  Basic Ethernet MAC address: C4:7 D: 4F:3 A: 9E:D0
  Part number: 73-11451-08
  Kit numbered PCA: 800-30554-06
  Revision number of PCA: A0
  Serial number of PCB: FOC14080B1U
  Top Assembly part number: 800-31273-04
  Top of page the Assembly serial number: FCZ1414W1X5
  Top of page revision number: A0
  Product/model number: AIR-LAP1142N-E-K9
  % Please first set a domain name.

  Press RETURN to get started!

  * 00:00:06.561 Mar 1: * CRASH_LOG = YES
  MAC Ethernet address of base: C4:7 D: 4F:3 A: 9E:D0

  * 00:00:06.749 Mar 1: % LWAPP-3-CLIENTEVENTLOG: reading and initialized event AP log (contains 82 messages)

  * 00:00:08.794 Mar 1: % LINK-3-UPDOWN: Interface GigabitEthernet0, changed State to
  * 00:00:08.810 Mar 1: % SYS-5-RESTART: System restarted.
  Software Cisco IOS, C1140 Software (C1140-RCVK9W8-M), Version 12.4 JA (21 a), RELEASE SOFTWARE (fc1)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2009 by Cisco Systems, Inc.
  Updated Tuesday 8 June 09 16:28 by prod_rel_team
  * 00:12:08.010 Mar 1: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
  * 00:12:08.982 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed State to
  * 00:12:18.211 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface GigabitEthernet0 assigned address DHCP 172.20.20.228, mask 255.255.255.0, hostname APc47d.4f3a.9ed0

  * 00:12:28.972 Mar 1: % CDP_PD-2-POWER_LOW: all disabled radios - WS-C3560G-48PS NEGOTIATED (0026.98a6.2786)
  Translate "CISCO-CAPWAP-CONTROLLER"... the domain server (192.151.106.8) (192.151.106.6)

  Translate "CISCO-LWAPP-CONTROLLER"... the domain server (192.151.106.8) (192.151.106.6)

  * 00:12:37.968 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.
  * 00:12:37.971 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-CAPWAP-CONTROLLER
  * 00:12:37.973 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-LWAPP-CONTROLLER
  * 00:12:47.974 Mar 1: % 3-CAPWAP-ERRORLOG: go join a lwapp controller
  * 00:12:47.974 Mar 1: % LWAPP-3-CLIENTERRORLOG: put AddressCalled of Transport
  Writing of the
  * 00:12:47.981 Mar 1: % LWAPP-5-CHANGED: CAPWAP changed State to ADHERE
  * Jun 29 16:32:00.616: % SYS-4-PUPDATECLOCK: periodic update clock with ROMMON failed because size left in ROMMON (4294967295), large (29), error code (- 1).
  * Jun 29 16:32:00.616: % SYS-5-RELOAD: reload LWAPP CUSTOMER the request. Reason for charging: CONTROLLER INCOMPATIBLE VERSION.
  * Jun 29 16:32:00.616: % LWAPP-5-CHANGED: CAPWAP changed state at the bottom of the event log in NVRAM...

  using the values from the eeprom

  WRDTR, CLKTR: 0 X 86000800 0X40000000
  RQDC, RFDC: 0X8000003B 0X0000020F

  init done DDR

  IOS Bootloader - start System.
  XMODEM file system is available.

  DDR used values of the system serial eeprom.
  WRDTR, CLKTR: 0 X 86000800, 0 X 40000000
  RQDC, RFDC: 0X8000003B, 0X0000020F

  PCIE0: the connection is established.
  PCIE0: VC0 is active
  PCIE1: the connection is established.
  PCIE1: VC0 is active
  PCIEx: initialization done
  flashfs [0]: 5 files, 2 folders
  flashfs [0]: 0 orphaned files, orphaned directories 0
  flashfs [0]: Total number of bytes: 32385024
  flashfs [0]: bytes used: 2271744
  flashfs [0]: available bytes: 30113280
  flashfs [0]: flashfs fsck took 16 seconds.
  The system eeprom read cookie series... Fact
  MAC Ethernet address of base: c4:7 d: 4f:3's: 9e:d0
  Ethernet speed is 1000 MB - FULL duplex
  Loading "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx"...#######################################################################################################################################################################################################################

  File "flash: / c1140-rcvk9w8-mx/c1140-rcvk9w8-mx" unzipped and installed, point of entry: 0x4000
  execution of...
  ENET stopped

  If you have login valid ORC, go to Support > download software > > Cisco Wireless LAN Controller 4402 Wireless > Wireless LAN Controller Software

  Release notes for the controllers wireless LAN Cisco and Points of light access for version 7.0.98.0

  http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn7.0.html

  Upgrading to a new version of the software

  http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn7.0.html#wp472449

  Remember messages useful rate.  Thank you.

• Activation of RADIUS Auth/Acct on WLAN controller 4402

  Hi all

  Just need to activate authentication RADIUS and accounting on Cisco 4402 WLAN controller, so this controller WLAN what admins can be authenticated through a RADIUS server.

  I want to assure you that I could connect via the console or the local user account, if the RADIUS auth/acct on WLAN controller does not work for some reason any. I don't want me locked out if RADIUS auth/acct does not work.

  I have set up RDIUS for switches cisco 3750 and works very well.

  any suggestions please.

  Thank you very much.

  Keita.

  You must set the order

  Security > priority > user management

  Network user is for wireless authentication.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• 2112 WLan controller and Point of access LAP1042n issue

  Hello

  I recently bought a 2112 a Wlan controller a number of LAP1042n Ap of the AP will not join the command and the message I get in the console of the AP, it is that the AIR-WLC2100-K9-6-0-199-4.aes firmware does not support this model?  Can someone please verify that this is the case?

  Firmware AIR-WLC2100-K9-7-0-98-0.aes to overcome this problem?

  Thanks in advance

  David

  Yes, 7.0 doesn't suppoert he...

  CHECK THE RELEASE NOTES for more details...

  http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn7.0.html

• Satellite Pro 6050: WLan controller does not seem to be in Device Manager

  I'm a novice guy with computers.

  Well, I re-formated my laptop and re-installed all the drivers, but my wirless lan controller does not seem to be in my device manager.
  I was just wondering, if the driver needed to be installed in a certain order. I also had my add on the Vodaphone mobile card plugged into slot on the side that would make a difference?

  in any well any help would be great
  Dane :-)

  Hello

  As far as I know that the WLan card was optional on this unit. In this case, if you bought the device with wireless network card that WLAN should appears in Device Manager. But if you bought the laptop without the WLan card you won't find it in Device Manager.

  PS: The recovery CD already includes the WLan driver and you don't need to t in addition no driver to install.

• Restrict the use of data - WLAN controller

  Hello

  I am designing a solution for a hotel WiFi facility. This is mainly to provide access to the visitors of the hotel.

  I wonder bandwidth throughput on a per customer basis - which I know can be done on the controller.

  I was also asked to verify if the use of data restrictions may be implemented by the customer.

  For example, they want that the restriction of the use of 1 GB / 2 GB on their visitors, after which they are not able to access the network without additional authorization.

  Is there a way to do this on a Cisco controller?

  Thank you

  Rahul Nair.

  This doco is convenient for the speed limit:

  http://www.Cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/113682-BDR-limit-guide-00.html

  In addition, Rasika explains very well vs TCP UDP in a blog:

  https://mrncciew.com/2013/05/01/per-user-rate-limit-in-WLAN/

  Regarding limiting the total data of a user; I don't think it's possible with just a Cisco WLC. You would probably need some kind of third-party tool... I can't find much except this post earlier which is probably still very relevant:

  https://supportforums.Cisco.com/discussion/12101991/guest-WiFi-solution-hotel-industry

• Bundle of Web authentication on a WLAN controller integrated Catalyst 3750

  We have set up a wifi zone based on a few 1131AG access points and a few Cisco 3750 integrated WLAN controllers. We are now trying to use web authentication for our comments area. No problem by defining a WLAN of COMMENTS and the associated VLAN. We have also managed to download a custom controller authentication web page.

  However, when I try to display the custom page, both controllers of show me the internal default page (preview and during the phase of actual authentication).

  Global web authentication settings are the following: Security--> Auth Web--> Web Login Page--> custom (downloaded).

  On the controller software version is 4.2.112.0, and the page is an HTML page.

  Reveal any help be appreciated.

  Kind regards

  Sonia

  What you need to do is set internally (by default) and hit apply, then play again to custom and click on apply. You can still see the defaul if you use the preview, but if you associate the SSID and open your web browser, you should get the webauth page. I hope this helps.

• Satellite L750 - WLan controller driver is not installed

  Hello

  I formatted the laptop above using the hidden partition.
  Since that the wireless network controller is not installed and I can not find the drivers for it.

  Could someone help, please

  Thank you
  Dave.

  Hello

  Can you please post model mobile exact please?

  Back to your problem: what did you do exactly? Have you installed original recovery image and try to reuse for laptop with factory settings?

  Sorry for this question but I m confused a little. In General, after recovery image installation, all drivers must be installed correctly.
  What is the status of your WIFI card in Device Manager?

• Is it possible run a single AP 1510 without wlan controller?

  I am eager to test a 1510 Aironet Wireless AP without running a wireless LAN controller, is it possible? I can't find any documentation to be able to do this.

  Hi Jason,

  Unfortunately, you need a wireless controller for the operation of the series of 1510.

  The 1510 is a fist light access; in other words, there are firmware and options that only a controller can provide.

  If you need a full air mesh AP, you can check in the 1520 series, which is available with a standalone IOS. If you just need a robust outdoor AP, the 1300 series is available as a standalone AP.

• [WLAN controller] Unplug the PC Client in AP

  Hi guys,.

  How can I disconnect client PC to help AP Wireless LAN controller 4402? Only, I can disconnect my APs but not the client of the AP.

  Thanks in advance.

  You're not the only one who is busy! :)

  When you choose to "CONTAIN" an AP, client or something, it means that up to 4 of your KNEES, will adopt an approach of Robin and transmit a massive amount to authenticate the package for the poor bastard. Basically, he's got a back and the target will not be able to authenticate on your wireless network until you raise containment. So be sure you want to do this.

  The main Web page, Ad - Hoc Snape. You can find the MAC address of your target customer wireless. Click on this. In a new page, you will find a number of drop-down menus. Choose "external", "malicious" and choose the number of APs, and then you choose contains.

  \Hope this helps.

• NAT is allowed between the Access Point and the WLAN controller?

  Suppose that the AP and controller communicate over a network of L3.

  NAT can be done between the two?

  For example, suppose that the AP is connected to a DSL router that is running NAT.

  Yes, I worked on projects where we did a DRY VPN with NAT. As long as the AP is routable, it will call home.

• WLAN controller for nc8430, Linux Mint 14 and WIN 7 update

  Hello

  I want to upgrade my nc8430 (EM741AV) to the Standard WLAN n. is possible to do?

  What card is accepted by my Board?

  Thanks in advance,

  amkern1

  Hello:

  Without hacking (modify) the BIOS (which I do not know how), you can install one of the adapters listed in the service manual for your laptop wireless.

  There is no card n wireless supported for your model.

  You must buy an external USB Wireless N adapter if you want faster connection speeds.

  Installing an unsupported card will cause the laptop to put an end to started until the card is removed.

• Network not found - missing WLan controller.

  It's repost of the problem that I posted under another question, but since this was a determined, I wasn't able to get additional answers (and its URGENT!)

  I have a problem on my Hp Mini 110-3000ea netbook running Windows 7 Ultimate. I tried all the drivers listed for the wireless device to work, support page, but none of them works.

  The only thing left for me is to get the wireless to work. And on the audit of the management of devices from the PC tab, I see that Network Controller is a hardware not found (exclamation point!)

  Would be great if you could provide me a solution.

  Thank you.

  Hello

  You say you have tried all the drivers wireless here?

  Best regards

  ERICO