WLAN not found - but the card is installed in my M30
Hello
I've been setting up my new M30 SM30-832 obtained in a refurb authentic Tosh. All right, except the "thing" does not seem to recognize the installed wireless card.
At the start, up comes the dialogue of the new material, saying that he found a network controller, but try, that you want, it will not find a driver to make this work. Just appears as a yellow? in the hardware device manager
Will download and install the latest Wireless driver work?
I checked: the wireless card is here!
See you soon
Julian
Hi Julian,.
Wlan what controller do you? Did you buy a Toshiba or another provider?
When the Device Manager detects only a yellow question mark, the hardware is detected, but no driver does match!
As you bought the Wlan card driver should available in the box! When you look at the manufacturer that built this map, go to site (googled around) and the search with the name of the model or the part number for a driver of machting!
Rudi Bye
Tags: Toshiba
Similar Questions
-
Table not found but the data in the Table are available
Hello
I connected as SYS.
When it is placed below query in sql navigator, no line not found.
Select * from dba_objects where type_objet = 'TABLE' and object_name = 'GREM. "
But when placed under query, the rows are retrieved.
Select * from grem.
How is that possible?Hulk says:
It returns: SYNONYMSo, you have your answer. Now, you can issue:
column tbl format a79 select nvl2(table_owner,'"' || table_owner || '"."',null) || table_name || nvl2(db_link,'"@' || db_link,'"') tbl from dba_synonyms where synonym_name = 'GREM' / {code} and see what table synonym points to. SY.
-
Portege M800 - WLan not found after installing Win XP
I recently "downgraded" my M800 ppM80A - 03H 009 to XP, everything worked fine except the wireless no longer works. "."
I installed the PROset utility it gives the message "State of adapter not found in the registry.
The Device Manager gives the yellow exclamation and error (Code 10).I've uninstalled and reinstalled drivers from the Toshiba site.
I ran System Mechanic to check the registry problems.Any suggestions appreciated
PaulHello
I searched the internet for similar cases and it seems that this happens to more people using Win XP. It s is not serious what laptop you have looks like Win XP question with respect to certain wireless network cards
However, I ve had Win XP and Intel WLan card and never had such problems.Here's my recommendation;
-Go to the Device Manager and remove the WLan card in device list (press DELETE)
-Download CCLeaner (free tool) and clean the registry
-Visit Toshiba WLan portal and download the latest version of the driver for the wireless network card: http://aps2.toshiba-tro.de/wlan/
-Restart the device and then install the driver Wlan card.Good luck
-
Original title: Plustek OpticBook 3600 is not installed
Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.» The required section was not found in the INF"
PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers. Operating system is Windows XP Pro with Service Pack 3. The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot. I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is. Any help would be appreciated!
Hello
You can try the troubleshooting provided in the link below steps to fix the problem.You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device
http://support.Microsoft.com/kb/841567
Note:
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756
See also:
Error message: cannot install hardware. An error occurred during the Installation of the device
-
I have the Compatibility Pack installed so that I can open .docx files of type 2007 etc. Apparently the updates of Windows 'think' I have Office 2007 if updates following KB982331, KB981715 and KB982312 are queued to be installed, but they are unable to install it because I have not Office 2007 is installed.
When I try to install the tool in stand-alone via the following links
KB982331
KB981715
http://support.Microsoft.com/kb/981715 and select download package now.
KB982312
I get an error correctly indicating that "the expected version of the product is not found on the system. So they will never install successfully but Windows Update won't jump that updates are not necessary.
Does anyone know how to remove these updates to install?
Thank you
Chuck
Support of Microsoft's solution was to uninstall the Office 2007 Compatibility Pack. I chose to ignore the updates and keep the ability to view Office 2007 extensions.
In addition, contact the support does not count as a solution, especially when the problem is not resolved by the project "fix."
-
I reinstalled XP. I have SP1 is not found, but did install SP2 & SP3. I just located SP1 and it wouldn't install because 2 & 3 have been installed. Can I uninstall SP2 & Sp3 then download sp1 and install. What started this was my to tinstall net3.5 sp1 updates. He couldn't because there was no SP1 and I don't have any further updates until that this update is installed. Help
Thank you
Q: what about this one? -Online http://answers.microsoft.com/en-us/ie/forum/ie8-windows_xp/i-cannot-open-websites-using-internet-explorer-8/6f1e53c8-3522-4a78-8e4a-336863deb7fd
A: the answers I received has not solved the problem. That's why I reinstaled XP1. but you started this thread on 06 September, almost a week after you 'reinstalled XP' and then installed SP2 & SP3. Please explain?
KB2393802 was missing, I tried to download and said that it was not available.
2. How have you tried to download & where was she available (for example, when you ran a further manual verification of updates today)?
3. what 'net3.5 sp1' update you referring (e.g. KB951847)?
4 WEBCAST: What is the full name of your Norton application (for example, Norton AntiVirus;) Norton Security Suite) and when (exact date preference) your current subscription expire?
5 When you finished the clean install of Windows XP, etc., 01 September, how long was the computer connected to the internet until you have installed the Norton application?
6 WEBCAST: Is Firefox, Chrome or any other alternative browser installed?
7. have you backups of ANY changes Registry Mechanic has made to your computer since you've done the clean install of Windows XP on 01 September? [1]
==========================================================
[1] injudicious use of registry cleaners can play a role here. TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx -
NOT FOUND ON THE NETWORK BUT E-PRINT HP7500A WORKS OK
Hello
I have an OFFICEJET 7500 a printer.
This is related to my network without any problem on the printer wireless network page.
Can I use e-print by sending an email to the printer and it prints ok.
However, I can't print on my netwrk House to her. The mistake of the printer is unable to connect to the printer. Also when typing the IP address in a browser, it is not found. The hp network diagnostic tool also can not find.
I tried resetting it, it works, reconnect to the network switch but nothing seems to work.
When I installed first, everything was ok, it was two days ago. Now the only way to print is to send an email - please help.
Thank you
Hi The_Bandit_05,
Follow the steps in the document at the link below. Let me know what you find?
The information contained in this document pertains to HP products that have already been set up and configured for wireless and work wireless for quite awhile. This document contains information on the possible causes of an interruption of the wireless connection, tips to avoid the problem and the General troubleshooting steps to help you re-establish the connection Wireless on your HP product.
-
I recently bought Age of Empires 3 and tried to install it. I get to drive three - until almost the end - when I'm "error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the file ' Disk3C ~ 1.cab '. This may indicate a network error and the error reading CD-ROM, or a problem with this package. "The installation continues until the end of the progress bar, but it reads"Rolling Back Action"for about fifteen seconds before I got a"feature transfer error", which reads" error:-1603 Fatal error during installation. " Consult the help of Windows Installer (Msi.chm) or MSDN for more information. "Then, the Setup program stops and tells me that the game failed to install and my system has not changed. I cleaned the disk and it is in good condition. My computer also meets all the requirements for the game. I looked everywhere for an answer, but so far none has solved the problem. I tried to install it without the firewall and antivirus software running, in addition to install in safe mode. Any suggestions?
Hi void 1337,
Follow the suggestions below for a possible solution:
Method 1: I suggest that you put the computer to boot and then try to install the game and check to see if it helps:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2: You can also follow the link and check if it solves the problem:
Error message when you install a Microsoft game or a mapping program
http://support.Microsoft.com/kb/258496
You can also view the article mentioned below to learn more:
Microsoft games: InstallShield Error Messages
http://support.Microsoft.com/kb/910816
If the above mentioned methods do not work, then post your request in the age of the forum of the empire for further assistance:
http://Forum.AgeCommunity.com/
Let us know if that helps.
-
for example. Google 'bc spca', choose www.spca.bc.ca and go. Firefox gives me this...
File not found
Sorry, the page you requested was not found. Please try again.Original URI: /assets/tab_advocate_mo.jpg
But if I hit the arrow to the left, it shows me the page I searched for a fraction of a second, then goes back to the file not found again. This does not happen with Chrome or Internet Explorer. They go to the appropriate page.
I am running windows 8.1 and uninstalled and reinstalled Firefox. NO GO. Help, please.
Generally if an image on a page can not be found, Firefox does not redirect the entire page with an error message. the area of the image is just left in white. If this is not normal.
On the error page, what do you see in the address bar, if anything?
To check if one of your extensions could be the culprit, could test some pages from Firefox Safe Mode problem? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.
You can restart Firefox in Mode safe mode using either:
- button "3-bar" menu > "?" button > restart with disabled modules
- Help menu > restart with disabled modules
Not all add-ons are disabled: Flash and other plugins still works
After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).
Any difference?
-
fully patched W2000 SP4 - try to install or update flash adobe gives "the procedure point SetDllDirectoryW entry is not found in the dynamic library KERNEL32.dll." said ths for both FF and IE versions of the flash Installer... it just started recently... at least since the beginning of 2012... mcafee or norton stuff has never been near this box... This is (vascular) limited to install or update flash...
NOTE: had to choose ' Other/unknown' for windows option version in these forums, because some spark deletion of the option "Windows 2000":? :(
I'll just post a link to workarounds to the case where someone else wants:
http://forums.Adobe.com/thread/965334
Because Windows 2000 is out of support and has had no updates Microsoft security since July 2010, I'm puzzled why people are so concerned about having a Flash Player update. The exploits are likely to be totally confused.
-
not found boot device. Please install a drive of system.hard of operation (3FO) passed all the test drive I get this message after the recovery disc 1 stops at 36% and tells me to put in disk 2, I just discovered that my grandson was trying to help me by resetting my computer from factory settings off he thinks about 27% complete , it is only 8 and just trying to help this computer is only a few weeks was a Christmas gift its my fault for complaing about windows 8, can someone help me please thanks in advance
I solved this problem myself thanks all syudents there to post what you've tried I went to bios and disabled the startup enabled legacey mode sucure tried to go to the Boot Manager it was my boot devices tried to use recovery disc recived the same message I have reset to factory settings and was able to reinstall windows normally
-
When I click on a link in an e-mail, I get the message following 'application not found. The only way I can access the site is to copy the link, but it is not always possible. Can you advise?
Hello
Follow these steps to solve the problem.
Step 1
a. Click Start, default programs
b. Click set your default programs
c. Select your browser from the list
d. Click set this program as default
e. click OK.Then proceed as follows:
Step 2
a. click settings by default access and computer program Set
b. click on continue if you see the user account control prompt.
c. click Customize
d. Select your browser from the list
e. click OK.Kind regards
Afzal Taher
Microsoft technical support engineer -
I had to wipe my computer and thought that I had backed up my lightroom (lightroom 4). seems there is no back to the top and now I can't seem to re - install as the message catalog is not found. I can re - install?
Hi robbiemac1973,
You can reinstall the Lightroom app 4 from the following link:Download Photoshop Lightroom
However, you will need to start everything as a new catalog.
Kind regards
Tanuj
-
get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions? Using Windows XP.
Hi James,
- Please uninstall Acrobat Pro XI using the cleaning tool Download Adobe Reader and Acrobat tool - Adobe Labs.
- Restart your computer.
- Install Acrobat Pro XI using this link download Acrobat products | Standard, Pro | DC, XI, X & serialize.
Let me know if the problem persists.
Kind regards
Nicos
-
Definition of OPS of type attribute not found in the original Version, but it's there!
Hi all,
I'm new with ofa and I m having a problem when I try to deploy in the dev environment. (this works well in jdevelopment but not in the dev server)
Error page
Details of the exception. oracle.apps.fnd.framework.OAException: oracle.jbo.NoDefException: Houston-25058: ResponsabilidadId definition of the attribute type is not found in the QuiebresComercialesVO1 to oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1247) to oracle.apps.fnd.framework.webui.OAPageBean.renderDocument(OAPageBean.java:3247) to oracle.apps.fnd.framework.webui.OAPageBean.renderDocument(OAPageBean.java:3042) to _OA._jspService(_OA.java:228) I checked the VO.xml and the attribute is set as you can see in the next image 2013-07-19_0902 - mayistra library
I would be grateful if someone can give an idea of what it can be. Is there anything else I can check?
It's the clumsy version I'm working 2013-07-19_0905 - mayistra library
Thank you all.
Hi JulianE.
Seems good. But strange. Please bounce the average level of once and set the permissions of this file to 7777
Thank you
Sandeep
Maybe you are looking for
-
Remove the plastic box from Toshiba - A30-203
Hi, I have damaged plastic, plastic case where appear of the stickers for the Proccesor and "designed for microsoft windows XP. Also so that it is the hand remains essentially where the keyboard and mouse are in. The laptop is Toshiba A30-203. I woul
-
Why the control panel network connections window does not show my active network connections.
There is nothing visible in the network connections window. I still have full internet access.
-
Cisco Wireless router model WRT120N guard give up Internet connection
My wireless router will work for 6-8 hours, and then remove the connection to the internet. I switch the modem and the router several times to re-establish the connection. I'm also using a Netgear Access Point. I use: Charter high-speed Internet M
-
Tasks of Sony for Z3 (1.0.A.0.1 on Z1 (tasks)
Hello, do anyone know if it is possible to install patches from sony on the Z3 Compact that was available on the Compact z1. In the center of update on the Compact Z1, the version was 1.0.A.0.1 of tasks. Thank you
-
List PhoneLog never has the same elements as the native Phonelog
Hi all. I'm figuring the minutes devoted to the calls. But impossible to get the same behavior as the native PhoneLog. For example, I manually delete all the entries in PhoneLog in the PhoneLog. Can I browse through all entries with: allPhoneLogs = n