WLAN / WiFi problem after 10 Windows upgrade

Similar Questions

• WiFi problem after upgrade to Windows 10

  Greetings!

  I read a few posts on WiFi problems after the (improper) upgrade of Windows 10. I have a ThnkPad T530 which I've upgraded to Windows 10 Windows 7 in September (too late to roll back). Here's my question:

  I have three computers on my desk. This standard T530 running Windows 10, a ThnkPad E555 running Windows 7 and a Dell running Windows 8. I used all three last Friday. I installed Norton on all three Friday and everything went without a hitch. When I first started their return to the top of this morning, the two others came online as usual. The ThinkPad T530 connected by a router in the company, but has no access to the internet. I can connect to the hotspot on my phone and it connects fine. I tried to turn the WiFi connection and then turn it on again, restart, by killing and restarting the business connection, etc. Nothing changes.

  Help, please

  Ben

  Try the following:

  Open administrator command prompt:
  http://winaero.com/blog/how-to-open-elevated-command-prompt-in-Windows-10/

  Then, run this command:
  netsh int ip reset c:\resetlog.txt

• Problem after installing Windows Service Pack 3 on Windows XP Home edition error Media pc: files which are required for Windows to run properly have been replaced by unknown...

  Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc

  My pc runs Windows XP Home Media edition.  I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions."  To maintain the stability of the system.  Windows must restore the original versions of these files.  Install your Windows XP Professional CD2.  I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3.  How can I stop this happening?

  Hello

  Step 1: I suggest you perform the SFC scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Intermittent WiFi problem after upgrade to Windows 10

  My acer aspire V3 - 571 has been intermittently lose WiFi for the last 2 days since Windows 10 Windows 7 Home Premium upgrade.

  The Aspire has:

  Driver Atheros wireless network adapt AR5BWB222 10.0.0.38 Wednesday 2/15/12

  So far, I have:

  1. in the properties Atheros AR5BWB222 Wireless Network Adapter, I unchecked the box in the tab property management who read allow the computer to turn off this device to save power.

  1B. Made sure flight mode was in the off position.

  1 c. Forget exactly where I did, but made certain settings in another? location have been set to "Maximum Performance".

  2. check that the firmware is updated on my network router, the value 2 of WPA - PSK (AES) security.

  3. search through many forums to read the responses of people upgrading Windows 10 WiFi issues - seems it is a widespread problem, although no one said that the WiFi signal loss was intermittent, as is my laptop. Shots of the Internet for my research also shows WiFi problems occurred in the past for installation of Windows 8. (So far have not come across mentions of WiFi problems for the latest installations of Windows 7).

  4. in exploring my laptop, I came across a page of Microsoft Updates - SEE ATTACHED. I was surprised to find that these updates go out quite frequently during the day. For example, 10 separate updates between 23:30 and 16:24 on August 1 and 18 separate updates between 12 h 06 at 15:57 on August 2.  Included in the record of updates for August 1 and August 2. I am aware that Microsoft uses my WiFi to download updates AUTOMATICALLY. It is possible that this intermittent intermittent interruptions of the WiFi update download?

  5. this afternoon, when the WiFi did not work for Windows 10. I reinstalled as a dual boot Ubuntu 14.04. I have had no trouble to connect to the WiFi for Ubuntu.

  Not yet:

  1. I haven't tried connecting the laptop via an Ethernet cable to my router during one of these WiFi failure.

  2. my ISP is a VOIP/Internet, using a Westell and a single Cisco router configuration. I have not taken into account if they can be a cause of the problem.

  3. I read on a forum that someone corrected their problem with WiFi connection by changing their setting include TKIP security router

  NOTE: I need to put Windows screenshot attachment 10 updates in a response email separate to this post as this post does not accept the attachment.

  Would appreciate your comments and suggestions. Thanks in advance.

  I'll probably also put this on a Windows 10 forum elsewhere.

  Hello!

  FYI, this has worked for me, finally a solution!

  The strangest thing - I have uninstalled the driver Atheros. Do NOT reinstall it. After uninstalling the driver Atheros, a right screen Windows 10 panel immediately appeared style - either on advice of Panel or in the page settings of WiFi, was asleep, can't remember which - that contains an entry box marked my wifi password. I entered the password and boom, the wifi worked. He has been since.

  Once again thank you. Mark resolved.

• Aurora R4 fans operating at 100% after 10 Windows upgrade

  After upgrading my Aurora R4 for Windows 10 I suddenly after a week suddenly had problems with my control center and control of fans and lighting.

  When I turn on my Alienware fans go to 100% speed and stays there. No control of the fans in the command center, also not able to control them manually.

  Tried to reinstall the center of command several times. versions 3.5 and 3.6. Also tried the drain of power between UN-installing and installation. BIOS is A11.

  Summer contemplating the purchase of a new Council MIO but reading other messages I do not his failure as it seems that most of the issues related to the fans operating at 100% is related to the Windows upgrade 10. I tried running MIO diagnostic tools, but it will not work through the test.

  There is a blue light until then in left corner of the members of the IMU.

  My understanding is that the MIO card is connected via a USB port on the motherboard. What is problems with the origin of this problem USB driver?

  Does anyone know if Dell is working on a fix for this?

  Any help would be much appreciated!

  Thank you

  KO

  I have same exact problem on my R4 Aurora just upgraded to Windows 10.  I think it is a bug in the controller of Alienware Dell must fix as soon as possible (but probably will not fix soon, or never).  It is not your MIO Board, because many others have this same problem and I do not think that all these maps MIO just failed at the same time.

  I hope that Dell reads these forums because we do need a software fix for this.

  You can use a workaround and launch control center and go to the thermal control.  Adjust the fans from automatic to manual at a set speed or use the curve.  Then restart. It should pump fans several times on how to start and stop, but after starting the fans should settle.

  Also sleep no longer works on Windows 10 on the R4.  Put the PC to sleep works for a few minutes but he then wakes up and will not fall asleep.  Too bad Dell certified the R4 for windows 10 prematurely.  I would have never improved my Windows 7 Pro I knew all these problems existed.

• Re: Satellite L300 - problems after installing Windows 7

  Hello

  I have a Toshiba Satellite L300 bought with Windows Vista 32 bit about 4 months later, I got my Windows 7 64 bit done.

  1 my laptop has startup problems after I installed the drivers give him additional drivers to go, but I have downloaded drivers for Windows 7 64 bit

  2nd I hear music and want to hear the next song is what I use, but not net if the keyboard fn +? don't not go and play / pause next thank you Stop and media player tased funtionieren not only the weis tase of modest silence

  P.s. to translate with google

  Thanks in advance
  Patrick

  Hi Patrick,

  To be honest, your ad is very difficult to understand and I don t know what you mean exactly.

  According to your assignment, it seems that you need a driver and you can get all the drivers here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  In regards to the FN keys you have Toshiba Value added Package, and Flash Cards Support utility. Everything can be downloaded from the official page of Toshiba.

• HP Officejet 7612: analysis of problems after installing Windows 10

  After installing Windows (prior to Windows Vista) 10, scan documents with my HP Officejet 7612 became a hell of a job.

  Printing is no problem.

  With Webscan, I can only scan and save 1 page at a time, I can not scan several pages of the document 1 more.

  I downloaded "Extended Scan" but when I try to use this app, it says "year error occurred while scanning" without more information.

  With "HP Scan and capture" I can't scan the size of A3 paper full of documents and there seems to be no possibility to change the size of a3 paper. Maximum size is 'legal letter '.

  Same problem with "Windows Fax and scan."

  Are there other ways to recover the possibilities of full scan from my HP Officejet 7612?

  Hello
  
  Thank you for using the HP Forums.
  
  You can download and install the software COMPLETE features of HP printing for your operating system:

  The following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps.

• Toshiba laptop problem after Gaming/Windows Update.__No solution on the web.

  Hello! I use a Toshiba laptop.

  I was playing a game and windows update popped up!

  He has not yet finished, and my computer turns off. It was late in the night, so I decided to start the computer the next day.

  He will appear with the options
  'Safe Mode '.
  "Safe mode with network.
  "Safe mode with command prompt.
  "Last good known Configuration".
  "Start Windows normally".

  Whichever one I choose Windows XP logo appears, then crashes immediately, restart.

  So I tried to use "do not restart in case of shutdown"

  And the blue screen appears

  "stop: 0x0000007e (0x905c49b8, 0xf792b2b4, 0 x 80000003, 0xf792afb0).

  What is this error? I can't enter safe mode by the way!

  Thanks for your help.

  It's http://support.microsoft.com/kb/330182

  Advanced Troubleshooting use the following methods in the order in which they are presented. Method 1: Make sure that you have enough hard drive firstly space, make sure you have enough hard disk space. The Stop error message can be caused by insufficient disk space.

  If you use safe mode or the Recovery Console to start the computer, delete any unnecessary temporary files, Internet cache files, backup files of stored-program files that contain fragments of disk analysis files (.chk files). Alternatively, you can install Windows XP on another hard drive that has more free space.

  If you cannot start the computer, go to the next method to update the BIOS of the computer.

  For more information on safe mode or the Recovery Console click on the numbers below to view the articles in the Microsoft Knowledge Base:

  315222 (http://support.microsoft.com/kb/315222/) a description of the options to start Windows XP in Safe Mode
  314058 (http://support.Microsoft.com/kb/314058/fr/) Description of the Windows XP Recovery Console

  Method 2: Update the computer BIOS if freeing space on your hard drive has not solved the problem, the BIOS might have to be updated. Use hardware and software vendor contact information items that are listed in the "Références" section to contact the computer manufacturer to obtain the most recent update of the BIOS.

  Note When you update the BIOS, you may have to disable the memory the BIOS options, such as caching or shadowing him, temporarily. Method 3: Disable or update device drivers if you have successfully updated the BIOS and the problem persists, on the computer video card drivers may have to be updated or disabled. Follow these steps to troubleshoot video card drivers:

  1. If a driver is listed by name in the Stop error message, disable or remove that driver.
     • If the error occurs during the startup sequence and the system partition is using the NTFS file system, you may be able to use safe mode to rename or to delete the faulty driver.
     • If the driver is used as part of the procedure of starting the system in safe mode, you must use the Recovery Console to start the computer.
  2. If the Stop error message does not indicate a specific driver, update the video card for the latest drivers.
  3. Disable or remove drivers or services that you recently added.
  4. Check the list of Microsoft hardware compatibility (HCL) to determine if the computer's PCI devices are compatible with Windows XP. For more information about the HCL, see the Microsoft Web site at the following address:
     http://www.Microsoft.com/whdc/hcl/default.mspx (http://www.microsoft.com/whdc/hcl/default.mspx)

  Method 4: Remove unsigned drivers if you have updated the video card drivers and the problem persists, or if you cannot start Windows in safe mode, the problem may be caused by a different driver, not signed. Remove all drivers that are not digitally signed by Microsoft. For more information on how to do this, click on the number below to view the article in the Microsoft Knowledge Base:

  316434 (http://support.microsoft.com/kb/316434/) how to perform advanced clean boot troubleshooting in Windows XP

  Method 5: Remove all third-party drivers, you may be unable to determine which third-party driver causes the error. If removing unsigned drivers does not resolve the problem, try to move all third-party driver to the %Windir%\System32\Drivers folder files to another location. Follow these steps to move the third-party driver files:

  1. Use the Recovery Console to start the computer, or start the computer from a different installation of Windows if you have performed a parallel Windows installation.
  2. Create a temporary folder for the driver files. For example, you can create a c:\DriverTemp .
  3. Move all files that do not have a creation date for Windows XP of the 13/08/2001 to the %Windir%\System32\Drivers folder to the temporary folder you created in step 2.

     Warning If the computer relies on pilots third-party IDE or SCSI controller for correct operation, you must identify those driver files and leave them in the %Windir%\System32\Drivers folder.

  4. Restart the computer.
  5. Continue Windows Setup. You can add the files of the driver to the computer, one at a time to identify the faulty driver.

  Method 6: Remove third-party remote control services if you still have the problem after you use the previous methods and the Stop error message contains the name of the file Win32k.sys instead of a file name of the driver, the problem may be caused by a control program to third distance. To remove the service, use the Recovery Console to start the computer, and then delete the file of control service third-party remote.

  -----------------------------------------------------------------
  You can also try running Windows XP disk you and try the repair utility. Please rate me upward if you find my post helpful. Thank you!

• WiFi problem after update of lollipop

  Is anyone having problems with their wifi connection after updating to the pacifier. Mine was working fine before the update. A move 35mbps ookla speed test download when connected to my home fibre broadband before the update, but now even hit 1mbps after update. Keep buffering when watching videos. Home broadband Checked speed on pc and getting 34mbps so it's not my Internet problem. Would appreciate ideas. Thanks.Using xperia D6603 z3.

  That's what I'll do, fix the phone with PCC

  PC Companion (CCP)

  Bridge (for Mac)

  Alternatives on how to backup Xperias

  http://talk.sonymobile.com/thread/36355

  and uninstall any antivirus > check again.

• BlackBerry Z10 problems after the software upgrade

  After the software upgrade on my z10 I not receive notification for my text, whatsup and other notifications in my hub. Pls help

  I would try to reset your Hub first.

  Open the Hub and from the upper right corner, with the fingers sliding down to the center of the screen five times.

  You will see quick white screen, then a black screen with the text that the hub is set to zero.

  If after a day which not resolves your notifications, remove the twitter account of your settings > accounts, restart the BlackBerry, and add the new account.

• Pavilion laptop g6 - Wifi problem after upgrade to 8.1 Windows

  KIM

  I have a Pavilion Notebook - C3M29EA #AB7 g6 and upgraded to 8.1 windows yesterday.

  Since then, I was unable to detect my own wifi connection while I am able to detect my neighbours. (Everything worked fine before the update).

  Any suggestions?

  -Same here.

  After an hour of time I will ever come back that I solved the problem.

  (1) go on the internet via the wired LAN port

  2) update drivers for Ralink wifi adapter

  Go: Right click on the wireless network connection icon: properties/Configure/tab Driverr/update driver

  (3) after a minute or two of updateing the PC reports that the driver has been updated

  (4) pull the network cable and turn on WiFi.

  What a pain in the anus,

  Anyway, as I said, corrected!

  Dansda.

• K3 Note Wifi problem after upgrade to the marshmallow

  Guys, after upgradation of Marshmallow in k3 note, there arise a problem of wifi, it just dropeout every minute like connect for 1-2 seconds and disconnect then automatic...
  If someone knows how to fix this please tell me... I have hard reset my phone but the problem is not solved... so please tell me the solution

  Note from the admin; phone added to the subject type

  
  

• WiFi problem after upgrade to OS 10.11.2

  Hello

  I have a MBP 2010 I installed OS 10.11.2 yesterday because it was supposed to improve the performance of the wifi.

  Since my update the MBP does not see any network wifi more so that all of the other ipad and iphone at home are connected.

  I don't know how to activate the wifi to work again.

  Thank you for your help

  You have restarted your Mac since the upgrade? If this is not the case, try this, because sometimes a reboot solves things.

  You can also try a reset of the PRAM.

  If none of the above work:

  Try to turn WiFi off tension, and then back on... Or...

  Attempt to remove networks that you have connected to in System Preferences/network/WiFi/Advanced button/Preferred Networks. Then see if you are able to connect to a network... Or...

  Finally to try: System/Network Preferences, remove the entry from WiFi by selecting it in the networks list and clicking on the sign less . You may need to open the Panel with an administrator account and password. Then add the WiFi network, by clicking on the plus sign by selecting from the drop-down list WiFi Interface .

• Solve WiFi problems after upgraded 9.3

  After installing iOS 9.3 on my mini iPad, the device could not connect to my Airport network.

  The busy light was all the time spinnig, but the connection never got established.

  I could press the i key to display the IP etc but all entries were completely empty.

  I have zero network and turn on the unit and goes out, but not had any luck.

  I then abandoned static DHCP and all typed manually and suddenly everything started working, the busy flag disappeared and the symbol of a Wi - Fi connection appeared in the status bar!

  This seems to be a good workaround for now, maybe someone finds it useful.

  To close!

• Audio problem after installing windows 8.1

  I use a PC HP Pavillion Sleekbook 14.  I have upgraded to windows 8.1 and after installation my microphone is not working. Can I have help in the resolution of the problem please.

  Thank you so much Vidya. I would as soon as possible if the problem is solved.