WLC/LWAPP: invalid license in the application configuration

I am currently facing a problem with the WLC and AP. The AP is connected directly to the WLC. Join the AP and then ungroup you of the WLC. I saw a display error message. I wonder if anyone can advise me?

WLC: 2100

firmware version: 6.0.199.4

AP: 1242AG

Hello

the AP is Singapore reg field... Canada WLC... Then. Please do so below config...

WLC WEB GUI > monitor > Wireless > country > check Singapore > apply.

Let me know if this helps to get the problem solved or answered your question!

Concerning

Surendra

Tags: Cisco Wireless

Similar Questions

  • the application configuration is incorrect

    I am trying to open a Microsoft Outlook .exe file that has been transferred from a different computer and I get the error message: this application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this proplem. I DO NOT have the original installation discs and product ID and product key numbers are in my Outlook folders on the laptop that I CAN'T open. Microsoft says there NOTHING they can do and that we have to buy another copy of Office 2007 Professional, which is absurd. I already bought the software and it's on my hard drive and I want to just move to another hard drive and load it on a different hard drive.

    Hi Amajorman,

    Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to Outlook and would be better suited to the office community. Please visit the link below to find a community that will provide the support you want.

    http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • language packs without additional license in the application folder

    Ok. I think the title says it all. A few days ago when I installed PS CC and worked with him that the error does not appear. Why now? What does that mean? Only updates installed on my computer because PS installation was related to Adobe applications: PS, Illustrator, InDesign.

    Can someone tell me what is the problem?

    Best regards,

    Sebastian

    P.S. I'm on MAC with OS X 10.8.4. The same license and installation is on my second computer. This error does not appear.

    Post edited by: sebdea

    You could look in the folder of locale under the CC Photoshop application folder. en_US would be my only one.

    Gene

  • application .exe Odile could not run because the application configuration is incorrect

    can I get support to solve this error.

    Hello

     
    • This happens with this particular application?
    • You try to use the scanner for MS?
     
    You can view these methods:
     
    Method 1:
     
    I suggest you to disable any program of security on your computer and check if it solves the problem.
    After reviewing the question you must reactivate the security on your computer program.
     
    Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

     
    Method 2:
    If the error persists, please provide us with the error log:
     
    See also:
  • Can not install 'reader', 'flash', get Win64 message "cannot install the application configuration?

    Once I selected OS Win64 dload page, click on the button dload, enregistrer to save on my desktop, run istaller... Give us permission to run... then shortly after I get the message 'Host' above.

    This also happens try to update an earlier version in Firefox Flash plugin.

    Can someone help with this pls?

    Thank you.

    I see no selection for "Win64" on the Flash Player download page; Flash Player, you try to download?

    Try offline installers:

    Flash Player ActiveX (Internet Explorer)

    Flash Player plug-in (all other browsers)

  • VMware Tools upgrade changes machineID, breaks the issuance of licenses for some applications

    We have this application called localization, manufactured by Hyland Software. Whenever I've upgrade VMware Tools on our ESXi hosts on all virtual machines, it breaks the granting of licenses for the application and localization will not work until the licensing is completely redone. No idea why this is happening?

    Below is the reading of the application regarding the issuance of licenses, and attached is a screenshot of the error in the application. I'm certainly not asking someone to solve the problem of the application, but what on earth could possibly VMTools change that would have caused this? Thanks in advance!

    RegisterName

    dateregistered

    Networkid

    pcserialnum

    usernum

    stationdesc

    wkstationgrpnum

    cachenum

    MacAddress

    lastLogon

    badlogincount

    MachineId

    DALONBASE

    01/02/2013

    BVVGRCRGRKRO

    715828130

    0

    DALONBASE (SELF)

    0

    0

    005056b33b87

    04/02/2013

    0

    C8C2A6CCADFA02BFBAA68E68D9842B25

    DALONBASE

    04/08/2012

    YIEGRCRGRKRO

    715827788

    0

    DALONBASE (SELF)

    0

    0

    005056b33b87

    01/02/2013

    0

    006EEA89FBC395E1DAD4C3BA17DF7DF2

    If this is what is causing the problem?

    I'm sure of it - about 99.9% Yes.

    And if so, what changes would affect a particular software feature licenses?

    "All the virtual machines have a hardware version, which shows the characteristics of virtual hardware that supports the virtual machine, such as BIOS or EFI, number of virtual slots, maximum number of processors, the maximum memory configuration and other features material." - from http://www.vmware.com/products/datacenter-virtualization/vsphere/compute.html

    They probably linked the license to an individual (or several) attribute of the "hardware" of the virtual machine. Think of it regarding a physical system - changed nothing in the operating system (at least not GUID, MSN, etc.), it was something that the operating system has access to related material. You could probably bug them enough and get them to reveal madness method they use for this, but I don't know if it would be really useful. You can leave virtual to older material , to some extent, which means that you can reduce the number of times you have to repeat this process.

  • LR perpetual 6.0, installation of invalid license error: Mac

    I presented LR to my friend and he bought above which came with the worm 6 installation disk and license SN (24 digits) but has detected the error of invalid license during the installation on his desktop MAC with OS 10.11 despite him having signed with Adobe and has a user Id and password.

    Suggestions appreciated I've seen several similar posts on this relative to the upgrade to 6 but not with a new user.

    More like a file/folder permissions problem. As the license file folder is supposed to write to not write permissions. There was a rash of circulating 10.11.x with the latest version of Mac OS X.

    Do a Google search for this problem and follow the instructions to clear it up. Just look at some other posts on this forum and you see leave a few of them.

  • Cannot open the application

    I have an application which was to play with yesterday, and now I can't open it. I can run the application and get the connection of the screen and get reports with interactive but cannot access the page of the application. I have created a new app and when I hit the Create button to create the application I get an http error. Then I click the Cancel button, the application I'm trying just to create listed in the application Configurator. But when I click on the name of the application I get an http error "the Web page is not found HTTP 404". I have I screwed up now?

    Published by: bigcray on July 9, 2010 07:34

    I was getting this error too. It was a bug that has been fixed, but here's a workaround solution that you can try:

    Connect as sys and run ALTER SYSTEM FLUSH SHARED_POOL;

    I got to the point where I had to create a procedure such as SYS and give the rights to my users to run it if necessary:

    create or replace
    PROCEDURE FIX404(x NUMBER)
    is
      v_x      NUMBER   := x;
      v_sql    VARCHAR2(200);
    BEGIN
      v_sql   := 'ALTER SYSTEM FLUSH SHARED_POOL';
      EXECUTE IMMEDIATE v_sql;
    END;
    

    After you create the procedure, grant permissions to the user of the APEX. Then create a button and a PL/SQL procedure that triggers the button.

  • I replaced my original Apple Watch with a watch of S2. When I install and associate the new shows, is there a way I can restore all applications, configuration information and data of the original of the new shows so I don't have to start from scratch?

    I replaced my original Apple Watch with a watch of S2. When I install and associate the new watch and my iPhone 7 more, is there any way I can restore all applications, configuration info and data between the original and the new shows, so I don't have to start from scratch?

    Try this procedure

    Cancel the twinning of your iPhone - Apple and Apple Watch Support

    Spend your Apple Watch a new iPhone - Apple Support

  • the application has failed to start because its side by side configuration is incorrect

    I downloaded the new firefox and when I try to open it I get this message that the application has failed to start because its side by side configuration is incorrect

    Seems to be caused by a corrupt installation of Visual C++ (several versions can be installed-by-side).

    You can try to use the sxstrace tool to see if you can find which files are missing or damaged.

  • Apple Configurator 2: Installation of the application blocks / loops over the placeholder of transfer

    I tried to set up a cart with Apple Configurator 2. I'm in iOS 9.2, iPad 2 Air and El Capitan. I tried to put in place following the blue print instructions, but that, as a dismal failure as this resulted in 16 of the 20 iPads being brick. So I was their implementation of a group of 20, first install a profile and installing apps. I tried to install my apps, but which have resulted in a loop and the errors that have no definition massively. So now I install apps in small groups of 3-5 applications. The problem that I am running is sporadic looped / hung when I install some applications. There seems to be no rhyme or reason. When I try to install the application on its own, the problem persists. It hangs at step "installation of placeholder. So far, this has happened with: Garage Band, Photo Collage and Socrative Teacher Edition. To solve the problem, I have to 'remove' the partially installed apps and then renounce install the specific application. Even if I try to install the application on its own, the problem persists. Any suggestions on how to fix this? I'm banging my head against the wall here. I'm on hour 25 + (not counting the nights where I hit a button, go home and come back on a random error).

    Thank you!

    I'm having the same exact problems, described to a T, I also try to update / prepare several wagons and Config 2 has recently been the total scourge of my work. I love the interface and think I have a solid understanding of how to use the program, but the process never ends. I thought whole point of the program was to be able to add/remove/update / manage iPads massively, but it seems to be able to get everything that fact I can only work with 2-3 iPads, both. Even so, I also have problems with remains of place holders or partially installed or removed applications. Please let me know if there is anything I can do to allow this program to run more smoothly.

  • Error: "the application failed to start because its side by side configuration is incorrect."

    Original title: youcam /camera fun zone

    How can I solve the problem / the application has failed to start because its side by side configuration is incorrect is the message that is displayed

    [Moved from comments]

    Hello

    Thanks for posting your question on the Forums of community of Microsoft.

    1. don't you make changes to the computer before the show?

    2. which version of the operating system is installed on the computer?

    3. when exactly you get this error message?

    You can uninstall all existing Microsoft Visual C++ Redistributable Package on the system and install the latest Microsoft Visual C++ 2010 Redistributable Package and check if it helps.

    Uninstall existing Microsoft Visual C++ Redistributable Package

    Reference:

    http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program

    To reinstall the latest Microsoft Visual C++ 2010 Redistributable Package

    Reference:

    Microsoft
    Package redistributable Visual C++ 2010 (x 86)
    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

    Microsoft
    Package redistributable Visual C++ 2010 (x 64)
    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

    Hope this solves the problem.

  • Error - the application failed to start because its configuration side by side is not correct when you use Microsoft Safety Scanner

    Original title: microsoft security scanner is Guy accounts.

    It shows the following error - the application has failed to start because its side by side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details. can u please help?

    Hello

    You can uninstall all existing Microsoft Visual C++ Redistributable Package and install the latest Microsoft Visual C++ 2010 Redistributable Package and check if it helps.

    Method 1:

    Step 1: To uninstall the package:

    a. open programs and features.

    b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

    c. click on uninstall at the top of the list.

    Step 2: Download and install the latest package and see if it helps.

    Before you download, you can check am I running the 32-bit version or 64-bit Windows?

    For 32 bit: Download Details: Package redistributable Microsoft Visual C++ 2010 (x 86)

    For 64-bit: Download Details: Package redistributable Microsoft Visual C++ 2010 (x 64)

    Method 2:

    You can try to perform a clean boot and check if it helps.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    In addition, after you fix the problem, you can see step 7 above to restore your computer to a Normal startup mode.

  • the application has failed to start because its side-by-side configuration is incorrect for windows live messenger

    Wen I Conect live windows Messenger tray I have this massege and I can't conect to the programe

    the application has failed to start because its side-by-side configuration is incorrect

    Hello Pecky,

    Thanks for visiting the site of the community of Microsoft Windows. The question you have posted is related to Windows Live Messenger and would be better suited to the Windows Live Solution Center Messenger Portal community. Please visit the link below to find a community that will support what ask you:

    http://windowslivehelp.com/product.aspx?ProductID=2

    Thank you

  • How can I transfer OR-MAX configuration files during the installation of the application?

    I install my application on a PC that has no software EITHER.  The installation installs LV Run-Time and NO-DAQmx, OR MAX, but MAX configuration is the default value.  I use a USB DAQ.  I know that I can export the correct MAX configuration file but I don't know where to put it on the PC so that he sees MAX.

    Thank you.

    If you choose to include the harware config when you create the installation program, then you do not have to worry where it is placed and during the installation process, MAX on the new pc will attempt to import it

    If you want to manually copy the configuration on the new pc, put it anywhere you want. You must use the file > import the max function in order to use the new configuration.

Maybe you are looking for

  • HP S2031 monitor: S2031

    Suddenly, my monitor has stop working and falls asleep without coming on. I get a message saying "Check video cable".  I tried to disconnect and reconnect the DVI cable and the power cord. I had no previous problem.

  • S1800 - cannot install SP2 as "power required".

    Hello S1800-712 Windows XPI wonder if someone can help me. I tried to install SP2 and the message "Power" required for this upgrade but the laptop is plugged in, so it is not relying on the battery?I tried to take on the battery and installation, sam

  • Best way to display points boundaries of parcel

    WPF C# Hi, I need to somehow score points that are off limits on my graph of LinePlotRenderers 4.  This is the data structure: Point DataArray []] = new Point [4 256]; At the moment I think to simply add 4 PointPlotRenderers to display those endpoint

  • WIN8 not find ssd on e1 - 472

    I want to replace the old hdd to SSD (adata sp920ss) in asprire e1-472, I clone the HDD ssd but win8 is not to find the SSD drive and using the "diskpart" no drive only show. How can I replace the hard drive and let win8 show my SSD on recovery?

  • BlackBerry Passport line telephone number selected in the contact page

    When I pass my contact and search a person I then click on it phone number to dial, instead it keeps bring me to the historic call page.  very annoying, I have to dial the phone number manually. is there any solution for this?