wldlog.dll missing in messenger - cant cause of uninstall program is not listed in my Add/Remove programs

Similar Questions

• Miss me the windows system32 rundll32.exe. I can't access the Add/Remove in the control panel.

  original title: missing file

  Miss me the windows system32 rundll32.exe. I can't access the Add/Remove in the control panel.

  I tried to start - run with my c/d operating system

  I checked for viruses

  I purchase software to remove etc and REG files.

  Now that the devil do?

  Thank you

  If this

  I tried to start - run with my c/d operating system

  means that you have tried to use sfc/scannow from start > run, your experience is not surprising.  This 'solution' is often suggested by people who don't really understand what this command does.  It does not help to restore a missing rundll32.exe file.

  For what is

  I checked for viruses

  What is the name and version of your anti-virus application?  When (approximately) their subscription expires? What other antimalware applications installed?  What other antimalware applications you used recently to scan your computer?

  If you have not yet used the "software to remove the REG files and etc." return for refund or throw it out.  "Registry cleaners", 'tuners', etc. are not useful.  If you used to "clean" the registry, use its "undo" feature (if it has one) to restore the registry.  Longtime MS MVP PA Bear:

  TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  What probably happened is that your antivirus application deleted or quarantined in your file rundll32.exe thinking he was infected.  He could have, but probably not.  In any case, read the post that begins, "That 'solution' is not on my list." in the following thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/systemrundllexe-not-found/6e30aff2-a88e-4d86-a654-753d54f632d1 you can also read the rest of the posts in this thread.

  Note that c:\windows\system32\dllcache is a hidden folder, but you who type in the address bar of Windows Explorer (or copy and paste), the folder should open anyway.

  Assuming you manage to restore rundll32.exe, download, install, update and run full scans (not at the same time) with each of the following free tools.

  MalwareBytes AntiMalware
  SUPERAntiSpyware

• I get this everytime I try to print from my design program (Splash): error in C:\windows\system32\spool\drivers\w32x86\3\LXCItime.dll missing entry: RunDLLEntry It just started and I have not installed anything new.

  I get this everytime I try to print from my design program (Splash): error in C:\windows\system32\spool\drivers\w32x86\3\LXCItime.dll missing entry: lack of entry: RunDLLEntry It just started and I have not installed anything new.

  Hello Lscherr,

  Thank you for your message.  To clarify, you are able to print out your design program?  You can try to perform a clean boot and printing of your design program.  A clean boot will start your computer without any 3rd party applications, you can then start your design software and test the printing functionality.  If you are able to print, the problem may be caused by another application of part 3.  Click HERE for instructions to boot.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Can not get the Messenger at work need wldlog.dll

  I can't the functioning of messenger. tell me that I always wldlog.dll... anybody born have all the answers. I did everything...

  Hello

  Please repost in windows Messenger forums in the link below

  http://www.windowslivehelp.com/product.aspx?ProductID=2

• I am trying to install Windows XP and during the process, a message appears with the title "RUNDLL__Error in iesetup.dll Missing entry: IEAccessSysInst. The process then stops and I cannot make progress.

  I am trying to install Windows XP and during the process, a message appears with the title 'RUNDLL '.
  "Error in iesetup.dll Missing entry: IEAccessSysInst.  The process then stops and I cannot make progress.

  Do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with the third party burning software *-as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!

• error in ms01ary.dll missing during startup

  error in ms01ary.dll missing during startup

  Hi TonyMagsino,

  (1) since when are you facing this problem?

  (2) what is the complete error message you receive?

  
  Method 1: Enable the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

   

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  
  Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• may not use the email from Kodak, scanner - says wdllog.dll missing - how can I get that

  When I scan a document and try to send an e-mail with a kodak esp7250 an error message comes on saying WLDLOG.dll is missing - how can I get that

  You can always re - install the software driver from Kodak.

  Just make sure that you have the correct driver and the newer version.  You can get that on the web site of kodak.

• msdvcp110.dll missing file error

  msdvcp110.dll missing file error

  I'm done with the installation of c ++ redistribution and everything but does not work for ultimate express

  Original title: installation of visual studio 2012 on windows 8

  Hi Mike,.

  Thanks for posting your query in Microsoft Community.

  The error you get can be caused by components from Visual C++ Runtime libraries that are missing or get conflicted, perhaps due to a third party software or badly configured registry settings.

  So, I would suggest trying the following steps and check if the problem persists:

  Method 1:

  I suggest to install the Visual C++ Redistributable package in the system to boot and try to run the applications:

  Step 1: Clean boot of the system.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: refer to "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  Step 2: Download the Microsoft Visual C++ 2013 and install.

  Click on the link below and install it on your computer.

  Package redistributable Visual C++ to Visual Studio 2013

  If she fails to install and then try to install the Package redistributable Visual C++ 2010 in compatibility mode. Follow the steps in the link given below to install Visual C++ 2010 redistributable Packages in compatibility mode. Please see the following article:

  Make the programs more compatible with this version of Windows

  If the problem persists, try the following method.

  Method 2:

  Try to run a scan of the file system (CFS) auditor to check corruption of system files in the system. SFC scan will search for system files corrupted on the computer and fix them.

  1. Press the Windows key + X, click prompt (Admin).
  2. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, refer to this link:

  Use the System File Checker tool to repair missing or corrupted system files

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• I get the error indicating the niajel.dll missing for HSDIO in labVIEW 2010, can someone help how to solve this problem.

  I'm using LabVIEW 2010 and installed the drivers from device LV2010 and try to use the HSDIO functions, while setting the HSDIO function on the block diagram showing niajel.dll is missing, can someone help me fix this bug.

  I tried to uninstall and install not able to set several times.

  Hello. niajel.dll corresponds to the NOR-TClk, although NEITHER-HSDIO does not specifically use it. You use certain functions TClk?

  Also, what other PXI device driver are installed on the system? Could you give a report on the MAX system?

• Have mutli worm of LV - 7.1 to LV10sp1 on XP PC. DAQmx - nilvaiu.dll missing when trying to open the CODE of WIN7 32 bit LV10?

  Have mutli worm of LV - 7.1 to LV10sp1 on XP PC.  DAQmx - nilvaiu.dll missing when trying to open the CODE of WIN7 32 bit LV10?

  Should which driver I?  VERSION please - DAQmx works fine in LV8.6.

  Hi Briana,

  I think I understand what you're asking, but what current DAQmx driver use you with LV 2010?  Only the 9.1.5 and above drivers are compatible with LV 2010, while many of the old drivers will still work for you in LV 8.6.  Below, I have linked an array of DAQmx driver compatibility and Labview versions.

  http://digital.NI.com/public.nsf/allkb/F4E76EC05118F72D8625773000672298

  Does that answer your question?

• wczdlg.dll and netshell.dll missing and cannot start my Windows Firewall

  Hi all
  I hope that someone will be so good to help my with this situation I tried (and failed) solve this past week or so.

  I lost my firewall, l, and network connections.  As advised I checked the status of the automatic Wireless Configuration.  The State was "arrested" and was not a solution for this.  I continue typing applications for a solution ot wczdlg.dll and netshell.dll missing.   Now I can sign BT.openzone - it's the only way I can use the web.

  Also I can't start my Windows Firewall.  I have no idea why my system is so badly damaged - the only situation I had was that my charger no longer works and my laptop crashed.  I also brought my laptop (HP compaq nc4200-Xp) to my daughter.
  I don't have a recovery disc and the disc I have with drivers does not download.  I would be grateful for any resolution of this problem.    I'm only a moderate ad user have no knowledge regarding the actual system so need advice step by step.
  Thank you very much
  Jacky

  Hi Jacky,

  Thank you for your response.

  I suggest you follow the steps in the link below.

  Could not start the Windows Firewall service in Windows XP SP2:

  http://support.Microsoft.com/kb/920074

  Note: This also applies to Windows XP Service Pack 3.

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• XMPP.dll missing file

  At the start, my computer still comes with XMPP.dll missing file.  I looked online and can see sites where I can download this file, but I fear that they are reputable or not so eager to ask advice on which are safe.  I don't know if it's related, but my computer is running very slowly and it is very frustrating.  I know how to run disk defrag etc but none of this makes much difference to performance.

  Hello

  You did changes to the computer before the show?

  Method 1:
  Step 1: you can check if the problem occurs in safe mode.
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
  Step 2 the question don't occur in safe mode, and then perform a clean boot and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Method 2:

  Try the SFC (System File Checker) scan on the computer.
  For more information, see the article:
   
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 3:

  Alternatively, you can run a Microsoft security scanner to make sure that the computer is free of infection by the virus:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

• How can I download a fxscfgwz.dll missing in my windows\system directory?

  This missing dll (fxscfgwz.dll) is mandatory for the Member States to install and integrate "Fax Service" - in the Control Panel / Add / Remove Windows components... my XP Home Edition SP3 software...

  PML...

  Thanks for your suggestions - in the end I was able to re - run the sw FaxServices set up to look into another folder

• system32\hal.dll. missing. computer will not start. Help, please. I don't have an xp cd. XP is installed on the hard drive

  Hello
  My laptop is not at all start. It is just coming up with the error message "windows root>\system32\hal.dll. missing. Please reinstall a copy of the above file.
  Everything I can find on the web so far tells me to reinstall via an XP CD. My version of xp was preinstalled, because it's a computer dell laptop.
  Can someone help me?

  Hello
  Please take a look at this article and follow the steps in troubleshooting bottom of the page.

  http://support.Microsoft.com/kb/314477

  I hope this helps. Just reply to the results.

• sispower.dll missing. How can I fix it?

  sispower.dll missing. How can I fix it?

  Hello

  1. When you get this error message?
  2. Did you change the system before the show?

  Sispower.dll is a library of dynamic links for implementing power management of Silicon Integrated Systems Corporation SiS Power Scheme Library membership

  Try to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.