wlstartup.exe - Entry Point not found in Windows Live Essentials Beta

Similar Questions

• When I log into my account, the title of the next view rises, wlstartup.exe - Entry Point not found

  The full review is, the procedure entry point? GetHeight@CRMImage@@QBEHXZ cound not found in the library of dynamic links UXCore.dll.

  When we click OK, it shows that Windows Live Essentials Beta has stopped working. He then suggests the solution line check, I did. The recommended solution is to download Windows Vista Service Pack 1, 32-bit, once I did that, but the problem always not will disappear.

  Hello Mick Smith,

  Thank you for your message.  Click HERE and check the thread of Mechell P.  Please let us know if it did or did not help to solve your problem.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• wlstartup.exe entry point not found

  I get a message copied to the start: the procedure entry point? GetHeightCRMImage@QBEHXZ is not found in the library of dynamic links UXCore.dll.

  Tips Windows solution to download service pack 1, but it is already installed! Anyone know what that means. Apparently, it happened when I downloaded the new version of Windows Live?

  See the post of Mechell P to halfway to the bottom of this page: https://windowslivehelp.com/thread.aspx?postid=1549d01b-5419-41f8-accb-31b7e0e36383#1549d01b-5419-41f8-accb-31b7e0e36383 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Explorer.exe - Entry Point not found

  Last week I update my Lenovo G510 Windows 8.1.

  Yesterday, I've updated following three updates:

  1 - Conexant - Audio - Conexant SmartAudio HD
  2 Microsoft Silverlight (KB2977218)
  3 - Qualcomm Atheros Communications - Bluetooth - Qualcomm-Atheros Bluetooth 4.0 AR3012 controller

  After that when I restart windows message appears. It seemed not every time, but it often appears when I start computer.

  "explorer.exe - Entry Point not found".

  

  Thanks ColonelONeill

  After week last updated to Microsoft, this error is not after the start.

• hpqtra08.exe - Entry Point not found error. The Get procedure entry point Module F < [not found in KERNEL32.dll dynamic link library.

  Original title: hpqtra08.exe - Entry Point not found.  The Get procedure entry point Module F<[ could="" not="" be="" located="" in="" the="" dynamic="" link="" library="">

  hpqtra08.exe - Entry Point not found.  The Get procedure entry point Module F<[ could="" not="" be="" located="" in="" the="" dynamic="" link="" library="">

  (This keeps popping up on my screen and I don't know how to get rid of it. Can you please tell me what to do?)

  Hello

  ·         When exactly do you get this error message?

  ·         Did you of recent changes to the computer before this problem?

  ·         You are able to boot to the desktop?

  You can follow these suggestions:

  Method 1:

  If the previous step fails, follow these steps:

  a. restart the computer in safe mode and disable the HP service and check if the problem occurs. Follow the steps described in the following steps:

  b. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  c. Select an option when the Windows Advanced Options menu appears, and press ENTER.

  d. Click Start and run, type msconfig, and then click OK.

  e. the system dialog Configuration utility appears.

  f. click on the Services tab.

  g. Click to select the check box Services HP Digital Imaging Monitor or hpqtra08.exe.

  h. click OK.

  i. When you are prompted, click on restart to restart the computer.

  j. after reboot check if the problem occurs.

  Method 2:

  If the C:\Program Files, download and run the Microsoft of the link Security Scanner to make sure that your computer is not infected with the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

• Savedump.exe - Entry Point not found

  Whenever I restart the system, I get the mentioned error message below;

  Savedump.exe - Entry Point not found

  The procedure entry point SymSetSymWithAddr64 could not be found in the dynamic library DBGHELP.dll

  Whenever I restart the system, I get the mentioned error message below;

  Savedump.exe - Entry Point not found

  The procedure entry point SymSetSymWithAddr64 could not be found in the dynamic library DBGHELP.dll

  First, click HERE and download DBGHELP.dll. Save the file to your desktop for convenience.  Click on start > run > paste the file path below into the box run > click ok.

  C:\Windows\System32

  Open the system32 folder. Minimize the folder to the system tray. Return to the file that you have downloaded and right click. Choose "copy". Now optimize the system32 folder. Right-click in the free space in the folder and choose Paste. If you are prompted to replace an existing copy click Yes. Restart the computer. The error should be gone.

  Note that the file download will expire after 3 days because I used the free version of filemail.com.

• Cannot open iTunes or other things. iTunes.exe - Entry Point not found error

  Original title: iTunes.exe - Entry Point not found

  iTunes.exe - Entry Point not found

  The procedure entry point
  AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey is not found in the AVFoundationCF.dll dynamic link library.

  I don't understand why that keeps popping up whenever I'm going to try and open iTunes. Then he told me that iTunes is not installed correctly, even after you uninstall it and install and it installed successfully. It is really starting to make me angry. I don't know what I did. I was working with my iPod Classic moms and it simply does not work so I tried hard so he can. I think I could have managed to get rid of something by accident. Can someone please help please?
   
   
  Discussions were merged.
  Deleted duplicate.
   

  Hello

  Uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• NtrigApplet - unable to connect to the driver: failed to open device___TVAgent.exe - Entry Point not found the procedure entry point PowerReadACValue could not be found in the dynamic library POWRPROF.dll

  Hi all

  I have a HP TouchSmart tx2-1025dx Notebook PC Vista... I met 2 large pop-up windows that will not close & appear as soon as I turn on my computer gives me a time DIFFICULT to access anything whatsoever...

  They read as follows:

  NtrigApplet - unable to connect to the driver: failure to open the device

  TVAgent.exe - Entry Point not found the procedure point PowerReadACValue entry is not found in the dynamic library POWRPROF.dll

  CAN SOMEONE PLEASE HELP?
  THANK U :)

  Hi the apprentice 85,

  Remember to make changes to the computer before that happened?

  Looks like the problem is hardware or software related, I suggest you follow the below mentioned steps below to refine the question

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

   

  Step 2: Put the computer to boot to determine which program is causing the problem

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• dthtml.exe - Entry Point not found

  My 32 bit Vista installation has begun displaying the error message at startup:

  dthtml.exe - Entry Point not found

  "The entry procedure point not found _iob_func in the dynamic library MSVCR70.dll.

  I would be very grateful if someone knowledgeable could advise me on how to deal with this issue.

  Thank you very much

  johndoc37

  Hi johndoc37,

  I will need some additional information to help you best.

  ؠ exactly when you get this error message?

  ؠ all changes made on your computer recently?

  In the meantime, follow the instructions below that may help you resolve the issue.

  Method 1:

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Method 2:

  This problem is possibly due to Virus infection.

  Perform a virus online scan that might help you resolve the issue.

  Windows Live OneCare safety scanner is a free service designed to help ensure the health of your PC.

  • Check and remove viruses
  • Get rid of junk on your hard disk
  • Improve the performance of your PC

  Click on the link below for Online Virus scanner.

  http://safety.live.com/

  Check whether the problem is resolved.

  You can go to Microsoft Security Essentials protect your computer from malware.

  Click on the link below for more information on Microsoft Security Essentials.

  http://www.Microsoft.com/security_essentials/

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Assassins Creed 4 black flag: AC4BFSP.exe Entry Point not found

  When I tried to launch AC4 for the first time in a few months, I got this error:

  AC4BFSP.exe - Entry Point not found

  The procedure entry uplay_r1 pint. UPLAY_ACH_EarnAchievement could not be located in the dynamic link library uplay_r1_loader.dll.

  Is there a fix, if so, what is it?

  Hi Matt,

  When I launched AC4 first time I also had a similar error, but I have a solution for it.

  Follow the procedure below

  (1) download the configuration files for AC4:-orbit_api & steam_api

  (2) also to download these files .dll for AC4:-steam_api.dll, uplay_r1.dll & uplay_r1_loader.dll

  (3) replace all files in the directory of the game AC4.

  (4) and the cheers, you're ready to play.

  and if the game does not start also follow the procedure below

  (1) disable your antivirus real-time Windows Defender for a short time

  (2) follow the three steps (i.e. the download of these files & their replacement in the directory) previous

  (3) to start the game

  (4) if the game starts correctly activate your protection virus in time real windows defender.

  as AC4 begins, so I can't give you any solution.

• MovieMaker.EXE Entry Point not found

  On several computers, during the upgrade to Windows Live 2010 to 2011, I get an error after the upgrade when you try to use Windows Live Movie Maker 2011.

  The error is:

  MovieMaker.exe - Entry Point not found

  The procedure entry point? Initialize@base@YGXXZ is not found in the library of dynamic links WLXPhotoBase.dll.

  Under Win7 Service Pack 0 or 1, tried to uninstall all windows live and reinstall results in failure of the installation for just the Director.

  Any ideas?

  Hi KThurston,

  When you use Windows Live Movie Maker and the question you have posted is related to Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  http://www.windowsmoviemakers.NET/forums/

• 'Lightroom, exe Entry Point not found' (in German)

  Hello

  I have the following problem, I tried to open Lightroom CC (and PS CC too) and I received the following message
  
  'Lightroom, exe Entry Point not found' (in German), PS und LR CC CC too.

  and 'crtCreateSymbolicLink' not found in the DLL "C: Windows\System32\MSVCP110.dll"
  any suggestions?
  Both have worked 10 days.  its all over now.

  Thanks a lot all-Ingolf

  Try reinstalling the library: http://www.microsoft.com/en-au/download/confirmation.aspx?id=30679

• Adobe premiere elements.exe entry point not found

  Adobe premiere elements.exe entry point not found

  How can I fix this error message and run the program?

  Steinbeck wrote:

  First 12 items

  Under Microsoft windows Xp

  Photoshop elements 12 requires Windows XP SP3

  http://www.Adobe.com/products/Photoshop-elements/tech-specs.html

  Try to install Service Pack 3 on Windows XP.

  http://support.Microsoft.com/kb/322389

  While you're there, make sure your XP is perfectly up-to-date before installing PSE12.

• Oracle Enterprise Manager Console &gt; java.exe - Entry Point not found

  Oracle Enterprise Manager Console > database connection information is displayed > enter username and password, then click on the OK button > suite error message appears
  
  Java.exe - Entry Point not found
  
  The procedure entry point OCIConnectionPoolCreate is not found in the library of dynamic links OCI.dll
  
  I am running Windows XP Pro.
  
  Help, please... Thanks in advance.

  Only a general Council is possible. This kind of error occurs when there are the mismatches in your installed Oracle software. In your case "java.exe" and "oci.dll" do not suit each other. You may need to repeat the installation. Keep an eye on the error messages.

  Werner

• Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

  Original title: ntdll.dll error at boot fruity loops.

  get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

  Hello
  I suggest you contact support FL. I couldn't find all of the resources for this program.
  Eddie B.