WMASF. DLL was not found. Where you can reinstall the application?

Similar Questions

• Microsoft XP blue screen and message - this applicationhas failed to start because LSASRY.dll was not found, that reinstallation can correct moyenessentiel,

  no disc recovery... on a Panasonic Toughbook CF-50

  Let's see...

  If you see a message like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because lsasrv WITH. DLL was not found.  Re-installing the application may fix this problem.

  Then, when you click OK, you have nothing more than a mobile mouse cursor.

  I seriously doubt that the opinion of the engineer of Microsoft Support for try the last good known Configuration will replace a missing file, so that theory approaches the area of ridicule.    This is not what LKGC, that is not what he does and is not how it works.

  Re-installation of XP is a very bad idea.

  There is also no need get a Windows XP installation CD, because you can create a bootable XP Recovery CD yourself and then see to replace the missing file.

  I understand not all next to a Microsoft representative.  Obviously not tested, won't work, won't help, but there are the necessary links to an article.   It's just another MSE wild-goose chase.

  The lsasrv.dll file should really never be missed, so answer these questions as the best yo can:

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Then at the Recovery Console prompt enter orders to replace the missing file from backup copies that are already on your system:

  Copy c:\windows\system32\dllcache\lsasrv.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  Depending on your system configuration, you may need to copy the files somewhere else, so if they are not in the folder dllcache for any reason, enter the command like this:

  Copy c:\windows\ServicePackFiles\i386\lsasrv.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  Remove the CD and then type "exit" and restart your system.

• Error: ' ATL. DLL was not found"when trying to run any application.

  Original title: ATL. DLL was not found.

  I can't run applications in my pc someone in my house could not get into the computer and changed operating system to windows xp, which allows to be decommissioning of this t. Now, I get this message when I try to run an application: the application failed, because ATL DLL is not found, re - install the applicationmight solve the problem, but I get this message after you have re-installed and I don't know what else to do. Slow computer charges and freezing, something he has never done before. Same IE you have a problem, the only thing that works well, it is the remote assistant who helped me to get here and to him intermet, actually all of this with the dll thing started after I deleted the firefox browser because it froze the computer. Unable to restore my recovery utility, I tried a TI ran and told me it is impossible to get it back before I uninstalled firefox.

  Unfortunately, the support engineer technical 'expert' who is hired by the tips from Microsoft to run sfc/scannow will not help you.

  I would say that, as usual, the technical support engineer has not bothered to reproduce the problem and tried their own suggestion.

  If the atl.dll file is missing, sfc/scannow will launch but it does not work.

  It's just another wild goose chaseSupport Engineer.

  A lot of things will not work if the atl.dll file are missing.  System Restore will not work, Event Viewer do not work, you will not be able to get on the Internet, etc., until the file has been replaced.

  You try to run the system restore, you see the following message is displayed:

  Rstrui.exe - Unable to locate component
  The application has failed to start because ATL DLL not found.  Reinstalling the application may fix this problem.

  Try to open the event viewer, you see a message like this:

  MMC could not create the snap.
  MMC could not create the snap.  The snap-in may not be installed correctly.

  Name: Event Viewer
  CLSID: {975797FC-4E2A-11D0-B702-00C04FD8DBF7}

  Running sfc/scannow will be launched, but it will not run if the ATL DLL file is missing and you will see events like this in the event log (when you arrive, it works again):

  The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

  You can't get on the Internet using any browser.

  You have to somehow replace the missing or damaged file.

  The file might really be missing if he has been quarantined (actually deleted) by your antivirus not specified.  If the file is simply missing, you can just replace it and then later determine what happened to the file and decide what to do about this.

  You can search Windows on your system for ATL DLL and replace the missing file.

  THE ATL. DLL file must be in this folder (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Check and see if you can find the ATL DLL file in this folder, or if he's really missing, you will need to replace it:

  Depending on what applications you have installed, when you search for your ATL DLL system, you can find ATL DLL in several places on your system.  You must be sure get you the correct that belongs in c:\windows\system32.

  The most likely place to find a good copy of Atlant. DLL will be in one of these folders:

  c:\Windows\System32\dllcache
  c:\windows\system32\ServicePackFiles\i386

  Locate a copy of the correct Atlant. DLL from the file in one of these folders and copy/paste in the folder c:\windows\system32.

  Answered in the affirmative if invited to replace the existing file.

  There is a copy of the file on my SkyDrive, you can download a system not affiliated and then copy the file to a Flash DRIVE or a floppy disk and apply it on the afflicted system c:\windows\system32 folder.  Here's how:

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called atl when the name of the file should really be called atl.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• can not access my fulltilt poker account. application failed because libpng.dll was not found.re - inbtalling may fix the problem. Does'nt and we tried everything.

  the same problem occurs on laptop and main computer. I use windows care 1 for safety. I completely uninstalled and installed REE fulltilt. My computer won't load anything that is associated with the site. Even on google. I used fulltilt for a year and now when I'm home from my heart bypass surgery he'll let me make updates of the site. Sometimes it is just their and flips cards and I have to restart the compuyer down. I need really it's for entertainment that I will be put up for a while, thank you

  Hi papadarrel

  Try a few steps to check.

  Step 1: Uninstall the program by using The Windows Installer Cleanup utility.

  Try:

  1. Save the Windows Installer Cleanup Utility package on your computer

  2. right click on the Windows Installer Cleanup Utility and run as administrator

  3. follow you prompt in the installation wizard

  4. Once completed the installation, click on the Start Orb. Click on all programs

  5. click on Windows Installer Clean Up Ultility. Select Full Tilt Poker (if the list)

  6. click on remove, click on OK. Click exit

  Step 2: Now, reinstall the program and check.

  Step 3: If this does not work, then try to run the System File Checker tool and check.

  Also refer to:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/21d4a8ca-4105-42DF-9FF1-b86a00e3c321

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• File CoreFoundation.dll was not found

  From the start of my PC, I get a warning that says file CoreFoundation.dll was not found. How can I reinstall this file in my PC. My system is Windows XP.

  From the start of my PC, I get a warning that says file CoreFoundation.dll was not found. How can I reinstall this file in my PC. My system is Windows XP.

  Hey Engineer747

  the apple information below support can help you "CoreFoundation.dll file is missing.

  http://support.Apple.com/kb/TS2211

  1. If iTunes is still installed, Uninstall iTunes.
  2. Download and install the latest version of iTunes.

  

  Still need help? Take the Express Lane to contact technical support

  Use Express Lane to contact an expert on Apple support for custom and practical support.
  Get started

  and vista forums, you are

  Here is a link to the forum programs xp if necessary

  http://social.answers.Microsoft.com/forums/en-us/xpprograms/threads?filter=AllTypes

  Walter, the time zone traveller

• iertutil.dll was not found after trying to download internet explorer 8. I can't get into my computer. Not even the start screen.

  I can't get into my computer.  All I can get is the Task Manager.  It shows all my still intact material, I'm not him.  Not even to my home screen.  All that appears is my screensaver and a message saying to re - install iertutil. DLL... but how to do when I can't.

  Maybe someday, we will see again the proposal to:

  Once you open the Task Manager try the commands below.

  1. in the Task Manager, click file, and then click new task

  2. now type rstrui.exe and click OK

  This would launch the system restore on the computer refer the below Microsoft article more about the restoration of the system.

  If you really try , you would find that it does not work because rstrui.exe is unlikely that never will be in the PATH statement.

  If you want to launch the restoration of the system from the Task Manager, you will need to perform a new task like this:

  %SystemRoot%\System32\restore\rstrui.exe

  If c:\windows\system32\iertutil.dll is missing, you will see a message like this:

  Explorer.EXE - unable to locate component

  The application has failed to start because iertutil.dll was not found.  Re-installing the application may fix the problem.

  Because explorer.exe is not running, you will see only your background image /, but Ctrl-Alt-Delete will always bring up the Task Manager where you can maneuver around and replace the file.

  If the only problem with your system, it's that iertutil.dll is missing, you can replace the backup copy in the dllcache folder.  You can continue to obtain reviews iertutil.dll is absent, but just click OK for messages of recall as they pop up so you can continue working.

  One might think that you use the Task Manager, you can browse c:\windows\system32\dllcache and (after choosing to view all files) copy the iertutil.dll from there and then paste the iertutil.dll file in c:\windows\system32 where it belongs.  That actually works, but it seems that it does not work as you will get an hour glass stuck on the paste operation and perhaps wonder whether or not it has actually worked.

  To feel better replace the missing file, so you can actually see the file being copied and replaced... Task Manager, click file, new task and enter in the box (assuming that Windows is installed on your C drive):

  cmd

  Click OK to open a command prompt window and first make a copy of the original file (if it exists) by entering the following command:

  copy c:\windows\system32\iertutil.old c:\windows\system32\iertutil.dll

  That copies the file in progress if there is an and it will just complain if it is not a copy.

  We know that XP likes to keep the backup copies of critical system files in this folder:

  c:\Windows\System32\dllcache

  Knowing this, copy the backup copy of the missing file and replace the missing or suspicious file by using this command:

  Copy c:\windows\system32\dllcache\iertutil.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  Type "exit" to close the command prompt window.

  Who will replace the missing or suspicious file and if that's all that's wrong with the system, Shut Down box Task Manager, you can choose to reboot your system and see how things are going.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• This application has failed to start because uncdms.dll was not found. Reinstalling the application may fix this problem. How can I fix it? Kathy

  This application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix this problem.  How can I fix it?  Kathy

  The above explains the problem, my problem is I don't know what it's etymology comes.  Is this windows software, or software from Microsoft or both?  What is the name of the Application?  Help, please!  Thank you, Kathy

  Hi Kathy,

  1 have you made changes to your computer recently?

  2. When you get this error message?

  The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  I suggest you to follow the steps and check if it helps.

  Method 1: Uninstall and reinstall Windows Desktop Search

  The uncdms.dll file is installed on your PC when you download the Windows Desktop Search application. Problems with this application's files can cause a missing uncdms.dll of error appears on your system.

  To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:

  Step 1: Remove Windows Desktop Search from the boot sequence

  To do this, follow the steps below:

  a. click on the start menu, click Run.

  (b) in the Open box, type msconfig and press ENTER.

  c. in the System Configuration Utility dialog box, click the Startup tab.

  d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.

  e. restart your computer.

  Step 2: Uninstall Windows Desktop Search applications

  To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:

  a. click the start menu and select Control Panel utility.

  b. double-click the icon Add / Remove programs.

  c. in the Add / Remove Programs, locate and select the Windows Desktop Search.

  d. press the button Delete.

  e. restart your computer.

  Method 2: I suggest do you an online scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Explorer.exe Unable to locate component, this applicationfailed start because BROWSEUI.dll was not found, can access windows taskbar or white screen homepage

  Tried the boot failure, etc, but not good, were not the original windows disks

  Duplicate thread:

  URL: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system/browseuidll-was-not-found/7ef0bd88-ec8f-4a5a-bde2-43d0f94cab03

  Title: BROWSEUI.dll was not found

  Details:

  I use Windows Vista Basic (build 6002 sevice pack 2) as widows try to open I get the message, cannot start Windows (explorer.exe Unable to locate component) then a message (this applicationfailed start because BROWSEUI.dll was not found, reinstall the hotfix applicationmay) it's folled by a message (windows explore stopped working) I'm then left with a blank screen bar none tasks or a desk top, the only way to access the internet is through the Manager tasks, but I have no access to windows

  Hi, AlanWalker1885,

  FYI: A moderator will pass this thread to the appropriate forum.  The post belonged in the Internet Explorer forum.  Please take note of the drop-down menus when you click on the link below.  Thank you.

  http://answers.Microsoft.com/en-us/IE/Forum/ie7_6-windows_xp

  Do you have any friends who might copy the file browseui.dll from their Windows XP CD to a flash drive?

  Have you tried to register browseui.dll?

  1. At the command prompt, place you in the %Windir%\System32 folder.
  2. Type regsvr32 browseui.dll/u, and then press ENTER.
  3. Type regsvr32 browseui.dll, and then press ENTER.
  4. Restart the computer

  See the solution given here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/error-message-browseuidll-file-is-not-a-valid/04b33b18-d87c-40AE-BE35-71720dbbbab2

• Error when you try to start MSN Messenger: this application has failed to start because d3dx10_41.dll was not found.

  When I try to run MSN Messenger I get the following message is displayed:

  "THIS APPLICATION has no PU START BECAUSE d3dx10_41.dll was NOT FOUND".

  What should I do to fix this?

  Hello

  they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

  http://windowslivehelp.com/product.aspx?ProductID=2

• Error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem.

  Original title: error explorer.exe, Normaliz.dll is missing please help me about the issue.

  Hello

  I get the error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem"Please help me!

  Well - so much for the expertise of committed Microsoft Support Engineer 'experts', but no answer to what I expected.

  See how it works for you:

  If you see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  It is in the case Log:

  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Description:

  Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

  You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

  If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

  You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

  The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

  Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

  You also will be able to properly run a browser on the system afflicted to go on Internet download one.

  There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

  You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

  If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

  When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

  Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

  If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

  TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

  If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

  Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

• During the attempt to re - install the iTunes software, I got the Windows 126 error message. APSDaemon, exe-Unable to locate component. MSVCR.90.dll was not found. Re-installing may fix this problem

  I use Windows XP PRO Sp 3. I tried to open an iTunes download & got this message. "APSDaemon.exe that this application was able to start. Could not locate the component that msvcr.90.dll was not found. Re-installing may fix this problem. "
  All this happened after I tried to install a new update Apple iTunes. He kept saying that he could not install... I tried several different things to solve this problem, including doing a system restore in frustration, for 2 days before today... I tried to update iTunes, not always the case. Help, I'm a no techno, so please do not just refer me to somewhere else, I will never understand what I'm told to do, whenever I am sent somewhere else, I can't solve my problem & give up in frustration. Please can someone take pity on me & guide me through the fix?
  A related problem, I tried to run iTunes from the desktop, but I got was the Mini audio player.
  I just tried to recreate that & got again the error messages, the one listed above main & another one that says "iTunes is not installed correctly. Please re - install. Error 7 (Windows error 126).
  Whenever I try to re - install, I get the error again on the component .dll.
  I hope that's enough info to try & help me. I really need this fix to work as I have many meditations downloaded on iTunes, because Windows Media Player could not open the files.   It would take me hours & hours to find where they came, they were downloaded over 4 years!
  Thank you in advance.
  Sylvia

  If you have not had luck in iTunes (https://discussions.apple.com/community/itunes/itunes_for_windows?view=discussions#/?tagSet=1234) forum, uninstall and reinstall iTunes as described below:

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.  (If you are using Vista, see THIS instead).

  Go to control panel > Add/Remove programs
  Remove these applications in the following order (do not restart your computer if you are prompted during this process):

  1 iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4 Hello
  5 Apple Application Support (iTunes 9 or later)

  6. iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)

  7. iPod Updater

  8 QuickTime

  Open my computer > C: > Program Files
  Delete these files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Follow these steps if the message "cannot delete iPodService.exe: it is used by another person or program" appears when you try to delete the folder of the iPod.

  1. Make sure that you have iTunes and iPod Update utility are not open.
  2. Press Ctrl-Alt-Delete.
  3. Select Start Task Manager.
  4. Click the processes tab.
  5. Locate the iPodService.exe in the list.
  6. IPodService.exe-click and choose end process.
  7. Quit Task Manager.

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  NOTE: If you have trouble uninstalling applications, or if you have a problem, reinstall iTunes because the installer complains that it can not uninstall the current version of iTunes, see the 'Installation issues' section below.

  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

  Installation problems

  There are several tools to deal with problems installing or uninstalling applications.  If you have these problems, the following should help.  Before using one of these tools (including #3), you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  1 Microsoft has a program install and the resolution of the problems of the uninstalling which is supposed to "work better" and be "safer" to use the old Install Cleanup Utility (3 below).

  2. free Revo Uninstaller.  You can also download a trial version of uninstaller Revo's ' Pro', which has a few more aggressive cleaning options, but this should not be necessary.

  3 Microsoft Windows Install Cleanup Utility.  Although this tool has been the preferred tool to deal with the problems of Windows Installer, Microsoft removed from Microsoft download servers because it seems sometimes deleted more than he was supposed to (I believe this was linked to Office uninstall).  You can still get Windows Installer Cleanup here--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html utility

• system failed because iertutil.dll was not found.

  When you start windows xp pro starts then stops and says this application has failed because iertutil.dll was not found.

  When you see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because iertutil.dll was not found. Reinstalling the application may fix this problem.

  It is in the case Log:

  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Date: 18/02/2010
  Time: 08:38:48
  Description:
  Application popup: Explorer.exe - Unable to locate component: this application has failed to start because iertutil.dll was not found.  Reinstalling the application may fix this problem.

  The iertutil.dll file is required for explorer.exe at startup.  If explorer.exe is not able to run, you will not be able to do much with your system until the file is replaced.

  The file may have been deleted accidentally, malicious software could have deleted or your anti-malware software could have been quarantined it thinking it was a threat.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  First of all, here are all the things you can 'try' which do not work:

  sfc/scannow

  The iertutil.dll is not one of the files that are protected by Windows File Protection, so it will not be replaced automatically if it's missing 3498.  This means that sfc/scannow won't help you.

  It is also not on your XP installation for you CD to copy or develop.

  You will have the same problem trying to start in any Safe Mode.

  You will not be able to run a browser on the system afflicted to go on Internet download one.  There is also a computer big security risk when downloading files from Internet sites anyway.

  You can still use the Task Manager to run the system restore and back, but I've never tried.

  If iertutil.dll is missing, you can copy from a system that works in the system afflicted with the same version of XP and Internet Explorer or sometimes copy one from another location on your system.

  You can get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

  When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM you can click file, new task, browse and edit the menu drop-down "Files of type" to all files that you can see all the files in all the folders.

  Browse/navigate to c:\windows\system32 if iertutil.dll is really missing. If the error appears again while browsing, click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

  Then, still using the Task Manager, go to the c:\windows\system32\dllcache and see if there is a copy of the file.

  If this isn't in c:\windows\system32\dllcache, it is going to be elsewhere on your system and you will find another way.
  Start by looking in c:\windows\system32\dllcache.

  If it's the only thing missing, you can just copy the file to the c:\windows\system32\dllcache and paste it into c:\windows\system32 where it belongs.  If you don't, get one from a working system of the same type as yours, copy to a Flash DRIVE or a floppy disk and always using TM, browse, copy and paste it where it should be.

  TM, you can always access your thumb or other media same diskettes by navigation, copy, paste, etc. all work fine.

  You use TM to navigate to your thumb or floppy disk, copy the iertutil.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

  When go you there once again, your system may still be affected so no matter what you use for malware protection.
  follow these steps:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  It can be uninstalled later if you wish.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• AppleSyncNotifier.exe Unable to locate component. CoreFoundation.dll was not found.

  I get this warning in a pop-up for over 2 weeks now & sent a call for help to fix everything that can happen to cause this.     I heard of anyone.   The current pop-up States that the application has failed to start because CoreFoundation.dll was not found.   As said, it's that Windows would warn me if a solution is available.  Yet, I heard nothing.    Can I remove this foundation.dll core and where it is installed?   I looked in the start menu and introduced computer programs installed but did not see doing anything corefoundation nor I saw AppleSync Notifier.    Does anyone have a suggestion?

  John

  You can try an uninstall of all Apple products and hope that the message will disappear. However, who cannot always help. You may need to reinstall the Apple products such as iTunes, QuickTime and Hello and then uninstall so you receive the error message will disappear.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Normaliz.dll was not found, Explorer does not 'Class not registered', and the restore points are gone

  I left the room for about 20 min then when I came back I got this error

  QPService.exe - Unable to locate component
  This Application has failed to start because Normaliz.dll was not found. Re-installing the application may fix the problem.

  Then I restarted and had the same problem.  If I click 'OK' and then I get "Quickplay Resident Program has stopped working," then the error box changes the same thing but for avast and when I click on it I get "avast!" Antivirus has stopped working. "Click again and"GrooveMonitor utility has stopped working ". That's about 10 programs until next stop errors.

  The Explorer is also not work, my computer, folders, windows update, and many many other programs won't open.  Whatever this either in the Explorer tells me 'class not registered '.

  What I tried:

  • System restore - but it says that I have no restore points.  I used to have dozens, I did a lot of myself, and I don't know where they went
  • I tried to download Normaliz.dll, but when I tried to extract it to System32 (following the instructions I found on the web) he's not here, he gets another error.  So I put it on the desktop but then realized that I can't move it anywhere because I can't pull the top of my work or the Explorer.  I also tried to go into the Task Manager and do 'New task', but if I type anything this either in or click on 'Browse' then I get the same error on Normaliz.dll and then Manager tasks becomes inadmissible and accidents.
  • I tried to go into safe mode and Explorer still does not work, "New task" in the Manager tasks still does not work and I still do not have restore points
  • I tried a few other recovery tools before start and none of them has contributed to

  A lot of what I've tried has been recommended by other people when I did some research on google, but most people seem to have this problem because of IE, but I don't use IE and haven't for months.  Also solutions that seem to work for them have not worked for me.  I can't understand what caused it because I have not downloaded anything recently and it just happened when I left the computer and came back later.

  Any help would be greatly appreciated, I don't really want to destroy everything and reload windows.

  This looks like a general Windows failure since all kinds of independent programs stopped working. I would like to begin the troubleshooting process by testing your hardware from the hard drive and RAM. The machine can also be overheating. You can do it yourself or take the machine to a local professional reputable (not a type of BigComputerStore/GeekSquad of the place).

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  MS - MVP - Elephant Boy computers - don't panic!