WMM edition error message - ' cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. »
I made a movie of 30 minutes or more in WMM, some of the videos that I imported I had to convert to wmv, to import into WMM. Once I went to publish the movie, after the publication of about 1%, an error message pops up saying something like "cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. "I have 8 GB of free space on my hard drive and I tried to burn a cd on a dvd, and save to memory stick, none of them have worked, the same message is displayed even if they have sufficient space available. There is no red x in the videos or photos that I imported, so no files are missing. Some files have been moved when they were converted, but the movie plays well in WMM. I want to export to is in my documents is therefore always available. I spent hours trying to figure this out and I I still don't know what the problem with it! Help! I've also spent a lot of time to their conversion to avi to see if this helped and the same message appeared again.
What is the format of your source of debtor files and how did you convert
TO WMV?
I can only imagine that you are using Vista Movie Maker 6?
It's not really about the location... error messages can be very cryptic...
The error that you mentioned usually appears when the source files in the project
are damaged or are not fully compatible with Movie Maker and made
in a movie file cannot continue. In addition, large complex projects can cause
in this issue.
In some cases, it may be possible to record in DV - AVI, during registration as
. WMV fails: the following article explains how to save... Publish it in film...
6 machine and the graphic link shows where the option:
Windows Vista - publish a movie in Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker
The following chart shows where the DV - AVI option.
http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg
If the recording as long as DV - AVI fails... see the following articles:
Movie Maker - problem resolution - "cannot record a movie.
http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html
Windows Movie Maker error
Cannot complete the Save Movie Wizard
http://moviemakererror.blogspot.com/
Several formats are apparently compatible with
Movie Maker, but the most reliable choices are:
Photos - bmp
Video - wmv
Audio - wav, wma, wmv
Sometimes, it can help if you are going to... Tools / Options / Compatibility tab...
and uncheck all filters.
Tags: Windows
Similar Questions
-
Original title: Windows Movie Maker 6.0 Save Bug?
Something's weird with Windows Movie Maker...
It cannot record movies, I create somehow.
Immediamente when it starts to save, it gives an error signal: check if the original sources are always available (and yet, they all), there is no such thing as the save location (of course it is!) and if there is enough disk space (a lot of). Still, it will not save. How can this be possible?
I use an mp3 file (pendulum - watercolor) and have a lot of footage, often used with effects. They are 1280 x 1024 and a .avi file. Everything should work fine, but still does not work. Help me!
Something's weird with Windows Movie Maker...
It cannot record movies, I create somehow.
Immediamente when it starts to save, it gives an error signal: check if the original sources are always available (and yet, they all), there is no such thing as the save location (of course it is!) and if there is enough disk space (a lot of). Still, it will not save. How can this be possible?
I use an mp3 file (pendulum - watercolor) and have a lot of footage, often used with effects. They are 1280 x 1024 and a .avi file. Everything should work fine, but still does not work. Help me!
============================
It is sometimes possible to publish / save in the
Even if the DV - AVI format. WMV fails. If you are
running Vista Movie Maker 6.see the following:Windows Vista - publish a movie in Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-MakerWIndows Vista Movie Maker 6
The following chart shows where the DV - AVI option.
http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpgAnd sometimes unchecking that will enable all filters
registration in progress...Reach... Tools / Options / compatibility... tab and
Uncheck all filters / OK.The error that you received can be caused by the following:
(1) source incompatible or damaged files (photos,
video clips, audio clips).Several formats are apparently compatible with
Movie Maker, but the most reliable choices are:Photos - bmp
Video - wmv
Audio - wav, wma, wmv(2) the project is too big or too complex for your system
resources. Made video is time CPU and
can sometimes cause blackouts.The following items may be worth a visit:
Movie Maker - problem resolution - "cannot record a movie.
http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.htmlWindows Movie Maker error
Cannot complete the Save Movie Wizard
http://moviemakererror.blogspot.com/ -
original title: could not copy files
When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory. How can I fix it?
Hi GloriaZF,
What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.
You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.
I hope this helps.
-
I just downloaded updates for 2014 PS on mac OS 10.7.5. Now, he opens all the images - error message cannot open because the open parts are incorrect?
Hi Akash.
Download Installer Camera Raw and it seems to have solved the problem.
Thanks for your time.
Concerning
Peter DeBeer
-
It happened once before, but it somehow went away after I restarted my laptop. I restarted my laptop, this time, but it has not worked.
~*~
OK, so I just finished put a video together. It consists of a Hypercam 2 record (which means it's a .avi file), a PNG image, text and a song (which is a WMA file).
~*~
I save the file, and then click Publish Movie. Everything goes well until the last step where the video is actually published. The window made a break for a while before you receive the following message;
~*~
"Cannot complete the movie publish .
The video file cannot be published to the specified location. "Check that the publishing location is still available, that there is enough free space on the disk and then republish the movie again."
~*~
I know there are a lot of free space on the drive on my laptop (it's an Inspiron 1520), and that there is nothing wrong with any of my files. I tried to change places without result. It simply doesn't get it. It would be a great help to me if someone could tell me what is the problem :)
~*~
Thank you very much
Len
Microsoft Windows Movie Maker is not to let me publish my movies
Hello
I suggest you try the steps mentioned in the link given below.
Error message when you try to publish a movie using Windows Movie Maker in Windows Vista: "cannot complete publish movie.
http://support.Microsoft.com/kb/930435
Additional information:
Solve problems with publishing a movie to your computer
-
Original title: VISTA HOME BASIC MOVIE MAKER
Hello
I wanted to connect to music and it would be pretty easy to do using this program to create and then publish and convert audio to mp3 using another program, I have, but not. Everytime I try to publish it he says its impossible and to veryify the publishing location is still available, check it there enough space and to try once again, I have and it still does not, have any ideas people?
Hello
I wanted to connect to music and it would be pretty easy to do using this program to create and then publish and convert audio to mp3 using another program, I have, but not. Everytime I try to publish it he says its impossible and to veryify the publishing location is still available, check it there enough space and to try once again, I have and it still does not, have any ideas people?
===================================
I suspect that the problem is the format of the music files.
If you can convert them. Before you import into WMA
Movie Maker, you may be able to publish.Format Factory free software can convert. MP3 files
WMA... and can also join MP3 files.(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Format Factory
http://www.pcfreetime.com/
(the file you want to download is: > FFSetup260.zip
(FWIW... installation..., you might want to
Uncheck the box 'all' boxes on the last screen)Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
I have deleted all THE files in my libraries FCPX rendering but have still 1.5 TB of unidentifiable used disk space. I don't have FCPX libraries on my 3 TB external drive. The total size of my libraries is 650 GB (when I add up the individual), but when I click on read the information for the reader, it says that I use 2 100 GB! It does not show that everything is on the disk. I went in each library individually in FCPX and deleted all THE files of rendering. Reducing the total size of several concerts, but there are still almost 1 500 GB difference.
I tried to copy all libraries on another drive and they occupy only 650 GB (with no unidentifiable used disk space). I'm a bit confused. Someone at - it ideas? I would like to release 1.5 TB that starting to use the new hard disk with only 650 GB and reformat the drive, but if there is some kind of hidden, important files on the original drive as FCPX needs to work properly I won't ruin the hundreds of hours I spent on editing. I hope that all makes sense. Thank you in advance.
I use an iMac 27 "with 3.4 GHz Intel Core i7, 8 GB of memory, NVIDIA GeForce 1024 MB graphics, OS X Yosemite 10.10.5, FCPX 10.2.2 3 TB Seagate USB 3.0 external hard drive designed for Mac and format Mac OS extended (Journal)
That doesn't sound right. The sound of back numbers compared to what could happen.
-
I need to update my pc, I have windows xp home edition. I had sp2 on my computer, but my system crashed almost and I had to do a total system recovery and it removed my files. Tried to download again, but I can't. I get error could not connect to the server. I have no virus or worms and checked each article are saying sp1 kb. I can't update the Explorer or anything like that
Follow the links in this article to download the Service Packs from Microsoft. You can download on another computer if necessary and move them to your machine to update.
"How to obtain the latest Windows XP service pack"
<>http://support.Microsoft.com/kb/322389 >HTH,
JW -
I get an error message indicating that there is insufficient disk space.
I get the error message: low disk space, you are running very low disk space on local disk (c :)) how to move files from the local disk on an external drive)
Hello
Connect your external hard drive > go in which your data is stored (music, Docs, etc.) > right click on what you want to move, and in the menu that appears, run your mouse cursor on ' send to ' > in the submenu that appears, select your external hard drive clicking > check the external hard drive for data.
Run this free program to see what takes up space in your hard drive.
http://www.Jam-software.com/treesize_free/
And also scan for Malware.
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware. :
http://www.Malwarebytes.org/products/malwarebytes_free
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
You can also perform a disk cleanup using Vista disk cleanup to free up space:
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
Or use the much better free version of CCleaner.
Do NOT use the part of the registry of it:
http://www.Piriform.com/CCleaner
See you soon.
-
Cannot export from Acrobat Pro DC - error that says not enough disk space
I am running Acrobat Pro DC in Win7. When you try to export a .pdf file in a .png image file, I get the following message is displayed: "error trying to write to the file. This may be due to insufficient disk space. I tried to export 1) a network drive, 2) a local drive and 3) Player of cloud, but without success. I have a lot of space on each. Help, please. Thank you, Mark
Hi marka25245057 ,
Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after crossing "" help > check updates "»
Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.
Also after opening Acrobat, go to the Help menu and repair the installation.
Try this: -.
Open a PDF in Acrobat
Go to file > export to > Image > JPEG
Save as dialog click on the settings button in the lower part
In the color management pane
Click on the drop down to RGB
Select Off & Ok
Save the file in JPEG format
If the problem persists, please check with the different user account to reproduce the problem.
Kind regards
Christian
-
I tried to change the attributes for the file I copy TO remove the READ ONLY check. I apply, say ok but when I open it READ-ONLY file is marked again.
Any help would be appreciated. Thank you
I tried to change the attributes for the file I copy TO remove the READ ONLY check. I apply, say ok but when I open it READ-ONLY file is marked again.
Any help would be appreciated. Thank you
=============================
I do not think that the 'Read only' attribute of your
file is the problem... in fact, it is typical.
All files on my XP Pro system have a
Square marker (not checked) to playback
Only the check box.If you want to experiment the following article...
explains how to change the read-only attribute.(326549) you cannot view or change theRead-only or system attributesin Windows Server 2003, Windows XP, inWindows Vista or Windows 7http://support.Microsoft.com/kb/326549/en-usMore information in the following article:
Why can't erase or reading the value
Only attribute checkbox on a folder?
http://www.jimmah.com/Vista/security/read_only_folders.aspxNow for the photos... lets make an experience.
Open your folder my pictures and create a new folder...
File / new / folder... (more on this shortly)Insert your SD card into your Media Player. Do not forget
to slightly press the card at the bottom of the slot.If the Autorun screen opens, close it.
Reach... My computer or on the removable click
Disk that corresponds to the location of your card is in.In the menu... Choose... Explore.
You should be able to see the directory of the card.
Open the folders and find pictures.
Reach... Edition / select all... then... Edition / copy.
Right click on the new folder that you created in my
Images, text and the menu... Choose... Dough.Transfer files or you still receive the error?
John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
I have windows xp. She badly needs updating. What is the most simple and quick way to update?
Hi Lynmiller,
· You install the service pack through Windows Update?
If so, you can try to install the update manually and check if it helps. In addition, it is important that you install SP3 because this update contains several other important updates and security updates.
Step 1: To install SP3, you must first have Windows XP Service Pack 1a (SP1a) or Service Pack 2 (SP2) installed.
Download details: Windows XP Service Pack 1a Express installation
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=19751
Step 2: Follow this link to install Service Pack 3.
Learn how to install Windows XP Service Pack 3 (SP3)
http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3
I hope this helps.
-
There is not enough disk space or memory to display or print the picture
I am trying to print a document from Microsoft Office Word 2007, but when I open the document, "are there not enough disk space or memory to display or print the picture" error message appears forbidding me from looking at the pictures in my file. How to solve this problem?
Hi IJustWantToBeSuccessful,
Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to MS Office and would be better suited to the Office Online community. Please visit the link below to find a community that will provide the support you want.
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
JohnD
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Cannot download game - error message "cannot create the temporary file.
Run windows 7 Home premium edition. Don't let me download games on a gaming site (Zylom). Used to have no problem with XP. Now on a new computer and cannot block the security settings. I get the error message - "unable to create the temporary file. It's very frustrating because it goes through the procedure of full download and then does it all at the end! Help, please... I have run Norton 360 on the computer.
Hey,.
Same mistake - http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/cad374f2-7da2-448b-bd92-23154763b9ec
As suggested, you must post in http://www.zylom.com
Dana
Girls. You never know what they think.
-
Original title: Device Manager empty
I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.
Hey Harcjk,
For your first question, go through this article.
None of the items appear in the device list manager when you open
http://support.Microsoft.com/kb/311504For the second question, here are some suggestions:
Method 1: Uninstall & install Parallels tools
NOTE: we highly recommend you make a backup of the virtual machine before you continue.
a. start your virtual machine and cancel the installation of Parallels Tools Wizard.
b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.
c. restart Windows.
d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.
Method 2: Uninstall antivirus software
If the problem persists, try the following:
Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.
Note: Don't forget to install the back antivirus software, once the problem is resolved.
Method 3: Uninstall, clean & install Parallels tools
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
How to back up and restore the registry in Windows XP
http://support.Microsoft.com/kb/322756
a. If the problem persists, try the following:
b. start Windows.
c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.
d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.
e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.
f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.
g. restart Windows.
h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.
I hope this helps.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Satellite A300-1MW - BIOS update instructions
Hello. I decided to upgrade the BIOS on my Toshiba Satellite A300 1MWI found something like this http://eu.computers.toshiba-europe.com/innovation/faq.jsp?FID=TRO0000000b07 but I can not find Satellite A300 After you download the updated BIOS Toshiba
-
How can I get edition gold painkiller on windows 7 rc to work
How can I get the gold edition of painkiller to work on 7rc I confirm to run the .exe as administrator but it's all the disc turns, but nothing happens and how do the xp to work mode
-
Create new account my admin account disabled.
Original title: missing account Hi all I tried to make another account on my windows pc, I did ok but unfortunately when I created the new accout it somehow automatically 'disabled' my administrator account and is no longer presents itself as an opti
-
Why the photo stops all the time by watching the video of youtube
everything by watching videos on youtube picture stops all the time
-
User profiles not available after restore O.S.
My computer Dell Inspiron 530 (purchased 04/08/09) with Windows Vista Home Premium 32 bit O.S. crashed due to a virus. I had restored by Best Buy Geek Squad. As he was in a State like new after the restore, I have none of my files available. I agre