WMP 11 allows you to burn or read DVDs or only data CDs? originally made wmp 11 decoder has to read and burn DVDs or not? I am running windows xp sp3.

I have windows xp pro sp3 and since I installed the fix wmp 11 Report Center that my disc is not readable in spite, I can play cds/dvds.and data also

Impossible to install wmp! so the fix Center report as nero burning plugin causes wmp to crash or does not not despite

every bit of nero have been removed from the registry.what going on? does any body help

Hi Kostas,

What is the brand and model of the computer?

You can try the steps to drive your CD-ROM or DVD drive is missing or is not recognized by Windows or other programs

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

322756

(http://support.microsoft.com/kb/322756/)

How to back up and restore the registry in Windows

Please post back with the State of the question.

Tags: Windows

Similar Questions

  • I need help! I try to open my PDF but I get this message on my Macbook Pro! "Before you display PDF documents in the browser, you must launch Adobe Reader and accept the end user license agreement, and then quit and relaunch the browser."

    I need help! I try to open my PDF but I get this message on my Macbook Pro! "Before you display PDF documents in the browser, you must launch Adobe Reader and accept the end user license agreement, and then quit and relaunch the browser." What should I do?

    Do exactly what the message says, and it will go away.

  • Before displaying PDF documents in the browser, you must start Adobe Reader and accept the end-user Li

    Since two or three weeks, whenever we try to open a PDF file, we get the following message:

    Before display PDF documents in the browser, you must launch Adobe Reader and accept the end user license agreement, and then quit and relaunch the browser.  There is no link in this post, and I can't find where to launch Adobe Reader to accept this agreement.  I do not understand why we started having problems all of a sudden, but it is extremely frustrating!

    We have a Mac OS X v. 10.7 Safari v. 6.0

    Thank you very much!

    If you have installed the Adobe Reader software to the deafult location you will see in your hard drive / Applications folder.

    Try this:

    1. Quit Safari

    2. from Finder > go > go to folder... > type in the path: /Applications/ and click 'Go '.

    3. run "Adobe Reader"

    4. accept the end user license

    5. open a PDF file in Safari.

  • Adobe Reader and Flash Player do not work.  I tried to download, but keep receiving a r

    Adobe Reader and Flash Player do not work.  I tried to download, but continue to receive an answer that I already have a newer version.  But it does not work if I have it.  Have you looked at my programs and it is not listed.  Help please!

    What is your operating system & version?

    For Flash Player, try a new installation as described in http://forums.adobe.com/thread/928315

    For Adobe Reader, I need to know your OS.

  • When asked "do you want to enable Network Service list? I continue to by clicking on the button "Activate this", and yet I am not able to see the activities or connections to all networks.

    When asked "do you want to enable Network Service list? I continue to by clicking on the button "Activate this", and yet I am not able to see the activities or connections to all networks. My internet works fine, I just can't see if I am connected or not. Help?

    original title: list of Network Service does not illuminate

    Hi SikDude,

    Please use the Forum of the community for Vista.

    Opening of services by typing services.msc in the search bar and find the list of Network Service. Under properties, set it to automatic.

    Please let us know if we can do something else.

    Matt
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Pre-installed Vista CD computer Dell laptop allows you to install Vista on another computer of dell desktop originally pre-installed with XP?

    Hello.

    Have an old dell desktop with XP.
    Have a new computer dell laptop with Vista.

    Both came pre-installed.
    Both came with a CD to reinstall Windows.

    Am I allowed to install Vista from that original CD on the desktop?
    I did, then you have the problem (not genuine copy of Vista). I have since reinstalled Vista, but before I completely setting up the office, once again, I want to make sure that I am able to do this (do not want the new not genuine error).

    Specific questions:
    1. am I allowed to use portable CD to install Vista on another computer?
    2. If so, that must be done to ensure the "not genuine" error can't?

    Thanks for any help.
    Shawn

    N °

    Reference Dell binds their records to their motherboards.

    If your computer is pre-installed with Vista, it is classified as an OEM license and is not transferable.

    The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
    You cannot transfer it to another computer/laptop

    And a Vista license = a Vista Installation.

    See you soon. Mick Murphy - Microsoft partner

  • My reading and writing system does not recognize the DVD. For this CD. I don't know why.

    For a long time my system CD/DVD in my laptop Del Estudio 1537 worked perfect. But all of a sudden my computer does not recognize or read or burn DVDs. Can you help me fix this problem?

    Hello

    You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
    Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
    correctly.

    Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

    Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

    CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
    tolerances. They may be delivered, but it is generally more economical to replace the disk.

    Several good info here:
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
    http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

    ===========================================

    This troubleshooting could not help if there is alignment and/or wear issues however it
    a shot.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

  • The text on some site is so light, I can hardly read and refreshing FF does not help

    I have an old laptop Toshiba satellite running Windows 7 and 42.0 FF. I always had a problem with the text on some web pages (including text, I'm typing now) is so light that I can hardly read it. I can't include a screen because I do not seem to paint on this computer. Does anyone know how I could fix this?
    Thank you.

    There are two sets of parameters. The web site/page current and comprehensive
    (all pages web/sites). Tap the displayed icon, and there you have it.
    All settings will be saved on a bass of each site.

  • with third party applications, I can read and write on the external drive HFS + for windows?

    Hello

    I see with third party app I can read and write to external disk NTFS on the mac computer.

    then othrwise, then I can read and write on extern hardrive HFS + with application of third party windows computer.  So who are the best third-party applications to read and write HFS and if they are free of charge on the external drive?

    Thank you

    Johan

    Now that I understand your goal, check out http://www.ufsexplorer.com/rdr_hfsp.php but your YMMV.

  • I downloaded the latest DNG from Adobe, but it will not read my Canon RAW files. I am running windows 10

    I downloaded the latest DNG from Adobe, but it will not read my Canon RAW files. After downloading, I loaded the program and then go to select the folder. When I go to records RAW files aren't there. I used DNG in the past with no problems but I have a new PC and running windows 10 and he would not consider my files RAW Canon cameras for some reason any. What am I doing wrong or it is not compatible with windows 10.

    Thanks, I use PLR, but I wanted to convert using DNG. It is all sorted now

  • Reader and Flash Player does not download

    I work in a school and between terms, that we are updating computers, students use.  The last few words every time we try to update Adobe Reader and Flash Player we havei questions.  We can run updates in Adobe Reader, but is not get it the latest version.  The computers that we are currently trying to put up-to-date have Adobe Reader 10 on them.  Most of the time he must start and stop the download and start it again so he can run the update.  Now they don't end the download at all.  If we try to run more than one download from adobe at the same time, none of the downloads work.  Currenlty we cannot even a single download to run.  All systems are running IE 8.

    For tasks, offline installers are better; Download them

    Adobe Reader: http://get.adobe.com/reader/enterprise/

    Flash Player: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header (to the title of the Progress bar hangs...)

  • every time I have try and watch a pdf file I get this message - before displaying PDF documents in the browser, you must start Adobe Reader and accept the end user license agreement, and then quit and restart the browser.  How can I do this?

    Help, please

    I found the solution on a very old web site.  Start the application and press tab & enter.

    That's it.

  • CD/DVD does not read discs on Pavilion G6 2293SA laptop computer running Windows 8 :(

    Hey there

    I would be very grateful if someone could help me with this.

    I bought the G6 Pavilion in November last year. When I got home I went to a recognize (as recommended) recovery disks but the laptop there is a blank disc in the drive. I tried a couple of different brands, but nothing worked and I got to the PC world. They couldn't work out what the problem was if gave me a replacement, and exactly the same thing happened. They claimed that it was probably one of the "many problems with window 8'. Finally, I tried some Sony DVD - R discs and it worked (hooray!).

    However, since that time the player rarely works properly. It seems to work ok program disks, but don't like them burn all discs. It has never worked through iTunes, for a few days, it let me burn some discs of music with Cyberlink Power2Go but it no longer works.

    Sometimes when I go hard disk it will say there is no disk in it (when it exists) or is it in use? We'll see what he does today... OK, Virgin (Sony CD - RW) drive... the hard disk is whirring... but nothing happens on the screen. OK, navigate to my computer... Double-click the icon and it says: "How do you use this disk" and gives me two options: "as a USB' or 'player with a CD/DVD '. However, it only allows me to choose the first option (which I don't) and even if I click ok on the flash drive option, it says that the drive must be formatted, mess around trying to do for about 10 minutes and then says format failed.

    Can anyone suggest anything? PC World that it is a software problem and my problem (thank you guys). Really grateful for any help.

    See you soon

    Paul

    I suggest using the corresponding update firmware in the driver download section.  Who looks more like a problem of hardware/firmware for me. Use Device Manager to select the firmware update software good optical disc. If the firmware update does not resolve the problem, thencontact HPfor warranty repair.

    Best regards
    ERICO

  • Laterally, IPhone video clips will play in WMP, rotate using Live Movie Maker and the file will not play on WMP

    It is perhaps one of the most common glitches in WMP, but MS is so confused, there is no solution (codec) to set the Iphone vids vertically in WMP.

    When you follow the web tutorials to rotate the clip using Live Movie Maker, it records the video to the format .wlmp that won't play in WMP.  So if you try to publish a movie there no option but send on Youtube or add Codec, which opens a page of gibberish, or when you try to save the film each option results in error "the device is not ready".

    If a guru of SevenForums cannot browse this intuitive nonsense, how millions of average users who find WMP plays videos of the Iphone on the side, while MS allows their ignorant WMP like some stubborn dinosaurs blunder?

    Hello

    This behavior can occur if the video was recorded in landscape mode.  You can see the link given below the similar question.

    http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/4419e884-0C35-493b-8399-4b0db1d77162

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Qosmio G35 - 600 - card reader and control buttons do not work

    Hello

    So I recently installed windows XP on my Toshiba Qosmio G35-600 and I found all the drivers except two. If someone out there could help me find this would be great.

    (1) the first driver, I can't find is for the control of Toshiba above my keyboard buttons (I think that's what they are called). Quosmios have 12 buttons on the top above the F keys and currently only my power button, the brightness keys, up and down and the keys sound dolby work. The key analog TV, the Media Center button, play, stop, previous, next, check-in and s-video, the buttons do nothing more. It would be cool if I had again a s-video on the ability, but above all I want is the previous play and next buttons to work.

    (2) the second problem I have is with my built in SD card reader. A few times I thought I found the right driver, but after installing the SD card was not appearing in my computer.

    A pre-emptive thank you for the help,

    Xamboni

    Hello

    On the U.S. Toshiba download page, you can find drivers Windows XP Home (link given by Luc). I think you're missing Toshiba controls for Windows XP (don't forget the common modules is installed first) and Texas Instruments PCIxx21 FlashMedia driver for the card reader.

    Is a device in the Device Manager listed as unknown?

Maybe you are looking for

  • Change appearance of Skype back

    I recently downloaded the update that changed the interface user of Skype, and honestly I'm not a big fan of the new look of the chat window. I much preferred the smoother, simpler appearance, he had; It makes greater reading missed conversation in g

  • Is this a virus? Is it safe?

    Recently, only Skype friend sent me a message, it is an image. It is his name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX So I called him. He said that he didn't send it to me. So, time passed, and another friend sent me another picture: -. X

  • TD200 and HD tray x 3400

    Hi, is it possible to use hard drives x 3400 IBM Lenovo TD200 Server? Tray/carriage of HD p/n 42R4131, had bought 4 for the version of IBM Lenovo Server case seems to be that of IBM x 3400, with the exception of the façade. Thanks in advance Good bye

  • How can I configure emails to open with double click instead of singel click

    at the opening of new emails I click on new message and it opens. I want to be able to click on a new message not open, so if it comes from an unknown source I can remove it instead of open

  • Do not get the drivers of HP Pavilion g6-2303tx for window 7

    Today I formatted my laptop computer and changed the OPERATING SYSTEM Windows 7 (32 bit) (complete edition) The basic drivers needed for the my laptop HP Pavilion G6-2303TX for the following devices, being put in yellow highlight by the Device Manage