WMP 11: and DRM.

Hi, I ripped a bunch of my CDs with WMP 11 on windows XP. I am concerned about a number of things.

From what I've read in WMP 11: stuff the DRM applies to content downloaded from online stores if you pay rent or get a promo any. And wma files.

I'm ripping in Wav and mp3 320 kbps. I'm finally in the first part of my collection. Sometimes it is very time consuming.

So my question is: someone at - it problems to listen to their own collection torn by tearing with wmp 11? I am a dj and plan to use these files in Serato or Traktor eventually and my digital file players (I have a Zune right now). I'm afraid I do not have to rip a whole collection again. I am also trying to scan and to get rid of a physical product. I have a lot of CDs and records.

When I look at the properties of files, he mentions that it is torn with wmp. Is - this propritory somehow? Or it is just information and must be cross-platform? Anyone recommend worrying about nothing and perhaps recommend another program to rip everything using wmp to listen and see?

The law States I can copy my own collections for personal use program. This isn't a solitation.

Thank you.

As long as tear you into WAV or MP3, then you can be sure that the files contain no DRM (these formats do not support that), and they can be played on other systems/platforms.

Ripping WAV could pose problem marking later, because this format has very bad assumption of marking. Tags are written only once the WAV files and cannot be changed thereafter, see http://thewelltemperedcomputer.com/SW/WMP/WAV.htm .

Tim Baets
http://www.BM-productions.TK

Tags: Windows

Similar Questions

  • When will be available TH HOM and DRM on Firefox

    Hello friends, I'm here because I have a question for you

    Well first of all I must say that I'm from Mexico and I am a Netflix Member, obviously because Firefox is not supported DRM I can not play, I have Chrome but this browser is TOO HEAVY, but is the only one with DRM on Linux support and my session crashes when I try to open Ello when g + uses a lot of resources , or when I try to watch a YouTube video, that's why I do the following question:

    When released the new version of Firefox with encrypted Media Extension CDM and DRM?

    I really want to make it work on FIrefox

    Apparently there are a lot of moving parts to the project. You can see a diagram of the remaining tree open "bugs" as well as those for which the work was completed here:

    https://Bugzilla.Mozilla.org/showdependencytree.cgi?id=1015800 & hide_resolved = 0

    I think leaving the number of uncompleted items, that you will see at least 6 months in beta. Sorry!

  • I would like to copy the time elapsed since WMP 11 and paste it into a Word document.

    I would like to copy the time elapsed since WMP 11 and paste it into a Word document. I have this on several occasions, is there a way to shortcut this process through Autohotkey? Would appreciate any help at all!

    Hello

    1. What is the operating system installed on your computer?

    Unfortunately, there is no shortcut key to copy the time elapsed since Windows Media Player.

    You can use your favorite search engine to search for any third party software that accomplishes your request.

    NOTE: third software of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  • play on board sound.thru WMP 9 and save files

    I have my record player pluged into my integrated sound card. Is it possible to play in WMP 9 and save files? Thank you

    Laughing out loud

    Audacity will work however (and you can also get rid of rumble Platinum and clicks at the same time) as it is a freeware Audio Editor. If your turntable is plugged into the microphone or line input, check if you have chosen that option entries in Audacity.

    See you soon,.

    Jerry

  • try to sync iRiver, using the version of wmp 11 and no progress after 5%... impossible to remove version 11 to replace it with an older version... can you help me

    try to sync iRiver, using the version of wmp 11 and no progress after 5%... impossible to remove version 11 to replace it with an older version... can you help me

    Hi florane

    Have you been able to sync with WMP11 before? This problem only started recently?

    Try these steps and check:

    1 check out the iRiver firmware updates site - they have made updates to H10 for example when WMP11 is out:

    http://www.iriver.com/HTML/support/download/sudw_list.asp?searchProductIdx=73

    2. also delete sync in WMP relationship - plug in the appliance, if it is set to auto-sync: plug it in, go to synchronize, click on the small arrow below, and then choose the iRiver and the 'end sync partnership.

    3. then go to the Control Panel, Device Manager, see if the camera is there, and then uninstall it. Disconnect and reconnect the iRiver, which should refresh the device and restart WMP to see if it works better.

     

    4 also a device for synchronization in the Windows installation Media Player

    After back and let us know if it helped to solve your problem.

    Thank you and best regards,

    R uma - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • BlackBerry Smartphones Some WMP songs non DRM Media Sync displays the status "not found".

    Version media sync: 3.0.0.39

    PC operating system: Windows 7

    Version of WIndows Media Player (WMP): 12.7600.16415

    BB: 9000, v4.6.0.304 (Platform 4.0.0.247)

    I have loaded correctly media sync.  He reads very well my Windows Media Library.  When it loads music playlists to select Synchronize, see most as 'Supported' in the status column.  However, there are many others who appear as 'not found '.   Is there a size limit of file or the maximum size of file/path that could be the cause?   These aren't the DRM files. He came to music that I burned a CD and a CD given, for example, could have 13 songs on it and have only 4 of them appear as 'not found '.   I don't see something like this in the forums.  I hope that someone else has seen elsewhere.   Thanks in advance for any help you might be able to offer.

    Found the solution!  I had to restore my library in Windows Media Player (WMP).  Currently, using v12.   Tools-> advanced-> restore medial library... (prepare to take hours 2 or more depending on the size of your library).  When the restoration is completed, I reconnected it my Blackberry for media Synch and all files started appearing.  After restoring 2 notes: 1) I deleted then recreated my playlists; (2) the default playlist called all music does not show media sync, but I renamed it in WMP, and finally, he has appeared in the Media Sync.

    Hope this helps someone.

  • WMP 12 and Win XP

    I have Win XP Pro with WMP 11.  Some TV sites continuously require WMP 12 for me to view their content.  WMP 12 works with Win XP?

    None

    WMP 12 is available in windows 7 and 8/8.1 and you cannot get it on older versions

    support for Windows XP was made April 8, 2014, to stay secure online and receive updates you need to upgrade to a version more than windows

  • Windows Media Player-how delete the audio files in the WMP library and add album art

    How can I get rid of dublicate on WMP songs? How can I get all the cover art?

    To make WMP automatically look for the cover, make sure retrieve additional information from the Internet are checked in Tools - Options - Library (press Ctrl + M, if you don't see the Tools menu). The only add missing information option is recommended.

    Regarding duplicates, I suggest that you try to reset the media library. Note firstly reset the library will make you lose all play counts and ratings too. Then, follow these steps:

    -Restart the PC.
    -Click Start, type services.msc in the search field and press ENTER. In Services, locate the Windows Media Player Network Sharing Service. If its status is started, double-click on the service and click on stop.
    -Click Start, type %LOCALAPPDATA%\Microsoft in the search field and press ENTER. This folder opens in Windows Explorer.
    -In this file, rename the old Media Player like Media Player folder. If you do not see the folder, then it is probably hidden. Set Explorer to view the hidden files and folders and show protected system files.
    -Launch WMP, your library will have been reset and will be rebuilt. Check if the problem persists.

  • Bootloader unlocked, lost partition TA and DRM keys, Sony can fix?

    Hey,.

    Unlocked the bootloader and installed CM. As a result, I lost my DRM keys and the partition of TA. While CM works very well, I would like to get my phone to the State wherever he was when he came out of the factory. I know that it's out of warranty, but does anyone know if Sony can solve this, and what it would cost me?

    Thanks in advance!

    The question was from Sony can fix it and the answer is not however if you want in stock with DRM keys then this would require a new motherboard

  • WMP 12 and large MP4 movie files

    I use WMP 12 as a server that is running Windows Storage Server 2008-R2 Essentials which is fully updated with Microsoft Updates. My drive configuration is the C 60 GB with 31,67 GB free drive and the car has just been defragmented and a free D 12 to 6 to Reader & 6 TB used never defragmented. I have 3 types of video/movie files that include wmv loaded. MPG and mp4. Most of the time my file sizes range from very small, a few MB, to larger sizes a little less than 9 GB. Recently I tried to load videos that extend into the 13 GB to about 20 GB in size. Although these files appear in the windows Explorer, they don't show in the list of folder/file WMP. All these files are mp4 but I have other mp4 is responsible and they play very well.

    Anyone know what is happening? WMP 12 has problems with i.e. large mp4 files those beyond 8 GB? WMP 12 has a restriction of file size? If there is a restriction that is a registry setting and can it be changed?

    Any ideas would be welcome.

    Thank you

    RandyJ574

    This issue is beyond the scope of this site and must be placed on Technet or MSDN
  • I have WMP 12 and have the files duplicate

    Whenever I open it, I get the duplicate files and I also lost a bimcj pf files.  Is there an easy way to remove duplicate files?  Is it possible to recover lost files?

    Hi, Kevin,

    These are two freeware software that recover files

    Pandora

    http://download.CNET.com/Pandora-recovery/3000-2094_4-10694796.html

    PC Inspector Recovery file

    http://download.CNET.com/PC-Inspector-file-recovery/3000-2248_4-10118663.html

    WinUnDelete (free trial)

    http://www.winundelete.com/

    Delete the duplicate freeware

    Duplicate Cleaner

    http://download.CNET.com/duplicate-cleaner/3000-2248_4-10584403.html

    Checker double

    http://download.CNET.com/duplicate-Checker/3000-2248_4-126476.html

    Auslogics Duplicate Finder

    http://download.CNET.com/Auslogics-duplicate-file-Finder/3000-2248_4-10964299.html

    Have you tried to uninstall and reinstall WMP 12?

    Control Panel > uninstall program > turn on or off Windows features

    Uncheck the WMP12

    Restart the computer

    Reverse steps to reinstall WMP 12

  • Updated my CPU (Windows 7 64-bit) and DRM rights do not seem to work for Windows Media Center

    After the upgrade, only the specific movie channels in Media center play is more (Record) after approximately 6 seconds.

    (Do not forget that there is a function of pause/forward who s equivalent to check-in for DRM)

    Get a message from copying prohibited.
    Looks like the upgrade of the processor messed up somehow DRM rights for this machine, to the point where no films previously saved are playable AND NO NEW FILMS can be registered and enrolled in some way a Canadian Film Channel. (Bell Expressvu - channels 300 + Movie Network)
    Delete the contents of the file DRM (archive first)
    c:/program data/microsoft/windows/drm.
    Restarted...
    Partial contents of the folder have been recreated...
    Problem remains.
    Can Watch all the channels, but those who are 'Movie channels' stop after about 6 to 10 seconds and display a Message of copying prohibited.
    The broadcaster has banned this content to be copied. You can only read this content on the same computer on which it was recorded.
    Note: I don't like on my OLD recorded movies... In fact already deleted... I just want to be able to watch the movie channels and save NEW ones...

    Well after 4 days of effort + a fix was finally discovered...

    (1) exit Windows Media Center is running.

    (2) open a cmd prompt - run as administrator.

    (3) run the following commands one at a time:

    Code:
    net stop ehrecvr
    CD %programdata%\Microsoft\PlayReady
    del *.hds
    rmdir /s Cache
    CD %programdata%\Microsoft\ehome
    del *.hds
    rmdir /s Cache
    net start ehrecvr

    (4) run Windows Media Center. Update of PlayReady through tasks, settings, TV, TV Signal, PlayReady update.

    It was the only solution to Playready update succeed to in Windows Media Center.
    Playback worked immediately without any loss overall upward or configuration information...
  • WMP Sync and Song Ratings

    When evaluating a song on my rocket, then sync with Windows Media Player (Windows 7 Ultimate) the side of the song does not affect the copy on my computer.  It's disappointing.  What I have to live with it or is there something I can do?

    Sansa Fuze V02.03.33A

    7807 MB memory

    60 MB free

    Thank you

    Scott

    I just got to work using Media Monkey and the instructions below.  When I change the rating of a song on my rocket and sync, the song in the library of Media Monkey then shows the new qualification.  I'm pretty happy with Media Monkey until now and I only have the free one.  It's also remove content on my Sansa Fuze is not in the list of synchronization Media Monkey, that is what iTunes told me to wait with synchronization.

    http://www.AnythingbutiPod.com/Forum/showthread.php?t=34002

    Scott

  • WMP settings and music

    Windows Media Player is capable of playing music from WAV files or FLAC with a depth of 24 bits (vice the 16-bit standard)?  And it will play files that have a sampling frequency of 96 KHz or 192 KHz (vice the standard 44.1 KHz)?

    This is what MS claim it supports - https://support.microsoft.com/en-us/kb/316992

  • Sever error running for WMP files and the music does not!

    I saw others similar to this one, but as the title says, I get this error! In addition, the music files do not appear in my files when I try to open them using programs such as Windows Movie Maker or other software media.

    I tried restarting the computer and turn Windows Media/disable again in Windows features. I tried several entries of both command line.
    As far as I know that I am not infected with malicious software (Ran a scan with Norton).  The last program 3rd party, I downloaded is a modeling software (DAZ3D, that I then uninstalled after that sounded like it was too hard computer work).
    My OS is Windows 7 32 bit

    Hello

    As with any database, the information that is stored in the database or the database itself can be damaged. The Windows Media Player library database can usually recover automatically from the database. However, the database may be corrupted in such a way that Windows Media Player is unable to recover the database.

    a. click Start, click run, type %LOCALAPPDATA%\Microsoft\Media Playerand then click OK.
    b. Select all files in the folderand then click delete on the file menu.

    Note You don't have to remove the folders that are in this folder.

    c. restart Windows Media Player.

    Note: Windows Media Player automatically rebuilds the database.

    If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

    a. click Start , click run , type %LOCALAPPDATA%\Microsoft and then click on OK.

    b. Select the Media Player folder, and then click delete on the file menu.

    c. restart Windows Media Player.

    Note: Windows Media Player automatically rebuilds the database.

    For more information see: http://support.Microsoft.com/default.aspx/KB/925718

    I hope this helps!

Maybe you are looking for