WMP opens Itunes M4A but cannot open the WMA to M4A
ITunes MPEG-4 audio stores on my PC as a file accessible M4A both WMP and Itunes, as well in Windows 7 and Windows 8.
However, without Itunes installed and the use of usual online converters, Windows cannot open the converted M4A WMA files.
My first step might be to find a new converter that distinguishes between MPEG-4 and MPEG - 4 Audio video.
But I'm not sure about this. Advice would be appreciated.
Is there anywhere, yu Imran?
Hi Mark,
I see that you are unable to open the M4A files in Windows Media Player. I'll help you with this problem.
Windows Media Player cannot play the file (or can't play either the audio or video of the M4A file part) because the required codec is not installed on the computer.
For more information about codecs, click here: http://windows.microsoft.com/en-us/windows7/Codecs-frequently-asked-questions
Refer.
Windows Media Player, frequently asked questions: http://windows.microsoft.com/en-PH/windows7/Windows-Media-Player-frequently-asked-questions
Let us know if you need assistance with any windows problem. We will be happy to help you.
Tags: Windows
Similar Questions
-
I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail. I worked around it through another proxy server, but navigation is a pain. does anyone know a solution to this problem? Roadrunner denies that it doesn't clog and so did the modem service here which is telmex?
[moved]
I had the same problem 2 weeks while in the Mexico. I contacted the support TWC and the person to whom I spoke said he had to unlock something. When he did, all my mail came in Outlook in the spam folder. It was OK because I got my mail.
I moved to a different House and now have the same problem again. I've contacted support TWC and not had much luck. The second level support person and I spent more than an hour, the call of the Mexico using Vontage. He has not found anything by the previous call that guided him by setting this time. He said that he would open a ticket and call me in the next 24 to 48 hours.
Is it reminds and solves the problem, I'll post how it was corrected.
Amigos audio!
-
new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help
Looks like you have somehow the mac version.
Download the updated windows 6.7 camera raw from this link:
-
I went on the Mozilla site to download to my Mac. I read the excellent instructions, but cannot locate the green arrow to start the download! I did not remove accidentally the arrow, as it was never there to be seen. I use Safari and don't have Firefox on my MAC (to my knowledge).
Thank you
PS: I clicked on the 'automatically add' and downloaded the file, but when I tried to open it, I get the message "Safari cannot read this file. Cool, huh?
See how to install Firefox on Mac.
- https://support.Mozilla.org/KB/installing+Firefox+on+Mac
- http://KB.mozillazine.org/Installing_Firefox#Mac_os_x
Open the Firefox disk image file and drag the Firefox program into the Applications folder on your hard drive.
Do not double-click the Firefox to run from the disk image, but instead, drag it out of the DMG file. -
I have Acrobat 8 Standard on this computer. I bought an upgrade to Acrobat 9 Pro, but cannot locate the disc not am I saw a bit of luck downloading the software. Any suggestions?
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
Hello
My problem is my WiFi says its connected but I can't browse or access the internet.it just tells me "unable to connect to internet computer is not connected to the internet", but my wifi says 'connected'.i tried to go to the cmd prompt and typed in "netsh int ip reset resetlog.txt c:\" goal it shows me "reset failed.access is denied .he don't s no user specified settings to be reset to zero." please "» What can I do?
Thanks in advance.
Hello @jerome256,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.
I understand that you are having a problem with your WiFi and wanted to help you!
You are trying to access WiFi through router? If you are connected to your wireless network, but cannot access the internet, then the problem may be with the router. Check that the router is connected to the internet. If you have more than one router, then you can ensure that you are connected to the correct router. You can also try unplugging the router for about 30 seconds, and then reconnecting it. Please consult the following document, as it can help solve the problem for you:
HP PC - Troubleshooting wireless network and Internet (Windows 10)
Please let me know if this information has been helpful by clicking the thumbs up below.
Have a great day!
-
Trying to repair XP Home CD, but cannot access the screen where you choose to repair or install fresh.
I get the first screen where you have the choice to configure windows or press 'r' for recovery console.
After I press enter for the installer, do not me the usual on-screen next where it is said that if the following XP installation is damaged, you can repair it. Instead, it leads me to a screen where it shows my partitions and asked that one I want to install windows on. If I choose "C:" he then told me that there is already a system opperating on the partition...
Hello
Follow the steps of "Error Message: Setup cannot set the required Windows XP Configuration Information.
' http://support.microsoft.com/kb/316425 '.Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.
Can someone help me with this?
Thank you.
See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/
If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1
-
Desktop speakers work, but cannot hear the music or videos on you tube
Desktop speakers work, but cannot hear the music or videos on you tube of my speakers
Tommy, thank you very much for your detailed answer. As you will see below, it has been fixed so simply!
Ah - so basically the same thing that fixed the issue of the original poster as well?
-
VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK
I tried to set up a simple customer vpn using this document
VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK BEHIND "RA"...
6.3 (5) PIX version
interface ethernet0 car
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the encrypted password of VmHKIhnF4Gs5AWk3
VmHKIhnF4Gs5AWk3 encrypted passwd
hostname VOIPLABPIX
domain voicelab.com
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list 101 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 101 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 102 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 102 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0
pager lines 24
Outside 1500 MTU
Within 1500 MTU
IP address outside 208.x.x.11 255.255.255.0
IP address inside 172.10.2.2 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool voicelabpool 172.10.3.100 - 172.10.3.254
history of PDM activate
ARP timeout 14400
NAT (inside) - 0 102 access list
Route outside 0.0.0.0 0.0.0.0 208.x.x.11 1
Route inside 172.10.1.0 255.255.255.0 172.10.2.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 172.0.0.0 255.0.0.0 inside
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-aes-256 trmset1, esp-sha-hmac
Crypto-map dynamic map2 10 set transform-set trmset1
map map1 10 ipsec-isakmp crypto dynamic map2
client authentication card crypto LOCAL map1
map1 outside crypto map interface
ISAKMP allows outside
ISAKMP identity address
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 encryption aes-256
ISAKMP policy 10 sha hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
vpngroup address voicelabpool pool cuclab
vpngroup dns 204.x.x.10 Server cuclab
vpngroup cuclab by default-field voicelab.com
vpngroup split tunnel 101 cuclab
vpngroup idle 1800 cuclab-time
vpngroup password cuclab *.
Telnet timeout 5
SSH 208.x.x.11 255.255.255.255 outside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 172.10.1.2 255.255.255.255 inside
SSH timeout 60
Console timeout 0
username labadmin jNEF0yoDIDCsaoVQ encrypted password privilege 2
Terminal width 80
Cryptochecksum:b03a349e1ac9e6022432523bbb54504b
: end
Try to turn on NAT - T
PIX (config) #isakmp nat-traversal 20
http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1
HTH
-
I bought Acrobat Pro DC and followed the instructions download, but cannot find the link for the download. Help, please!
Have you checked with link below?
-
I bought a version student Adobe 3 years... my computer has recently had to be reconfigured, I want to save my copy again, but cannot locate the registration key! How can I get a key please.
Please refer to find the serial number of your product Adobe quickly
Hope this will help you.
Kind regards
Hervé Khare
-
I need to cancel my monthly Illustrator, but cannot find the link that says that adobe will be in the area of management plan.
https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
-
Open the new browser works, but cannot change the cursor to reflect that it is clickable
Here is the link to my site - www.localwally.com/napatest3
I wanted to make all the pictures on the clickable site for a larger image - but I didn't have to create separate Web pages for each of them. And I went to the BEHAVIORS added "Open the browser click" - it works, but I can't find a way to change the cursor to the arrow by hand to show people that this is a clickable link. Here is the code below - any ideas? Don't you worry that when you click on it it does not return a pic. I didn't upload them for this test. You should get the new browser without content inside.
Also, I would love to add a caption to the photo, but does not know who is!
Thanks for your help - Gary
"< td width ="419"height ="318"> < div align ="left"> < span class ="style25' ondblclick = "MM_swapImage ('Image1 '", 'reynoldsfamily_800.jpg', 1) "> < img src ="Renolds_400.jpg"width ="400"height ="300"id ="Image1"onclick =" MM_openBrWindow ('reynoldsfamily_1000.jpg', 'ReynoldsFamily ',' width = 1000, height = 70 0') "/ > < br / >
Sipping a chard at Reynolds Family Winery, a beautiful look on the Silverado Trail < / span >> Is there an easy way to create this code in other
> that cut and paste?Learn the HTML is the most important thing you can do if you are serious
on the use of DW.There is an easy way to do it-
* Select the image that triggers the behavior
* Enter it ' # ' in the field of the property inspector link
* When you tab off the field link, you should see appear on the
Tag (at the bottom of the document pane) selector
* Click the tag in the tag selector and apply the behaviorThat you will get 90% of the way. There are two additional things you
can do after that-1 copy the link in the image you pop up and paste it instead of
the "#", you added to the link field
2. Add '; return false;' at the end of the behaviorI believe that David Powers has an extension called "Smart Link" that will do
These for you two. Google it...--
Murray - ICQ 71997575
Adobe Community Expert
(If you * MUST * write me, don't don't LAUGH when you do!)
==================
http://www.projectseven.com/go - DW FAQs, tutorials & resources
http://www.dwfaq.com - DW FAQs, tutorials & resources
=================="garynng" wrote in message
News:g3h10m$OIJ$1@forums. Macromedia.com...
> Thanks - a follow-up question - y at - it an easy way to create this code
> other
> that cut and paste? I have a lot of pictures on other pages
> and
> need an easy way to do it. I created the original code by clicking on
> the
> Option of behaviors on the right side of DW.
>
> Really, thanks for your help. My daughter told me about using DW versus
> coding myself the old-fashioned way and I'm happy she did, but it's a bear
> try to learn this stuff!
> -
ISP is ATT (my e-mail address ends in [email protected]) but to connect to check mail through us yahoo.com...
Well, my email has been working well for weeks... until a few hours ago. I'm on a brand new Sony Vaio running Windows7.
I use Windows Live Mail as my email client. All of a sudden I recvd the error messages seen below.
I can receive mail but cannot send!
_____________________________________________
The connection to the server has failed.
Subject 'test '.
Server: "mail.yahoo.com".
Windows Live Mail error ID: 0x800CCC0E
Protocol: SMTP
Port: 25
Secure (SSL): No.
Socket error: 10060________________________________________________
I ALSO TRIED TO CHANGE THE SETTINGS OF SERVER OUTGOING AND ALWAYS HAD THIS MSG...
(as well as for trying checked and unchecked "my server requires a sure blah blah... »)
_____________________________________________________
The connection to the server has failed.
Subject 'test '.
Server: 'smpt.mail.yahoo.com '.
Windows Live Mail error ID: 0x800CCC0E
Protocol: SMTP
Port: 25
Secure (SSL): No.
Socket error: 10060AND
Subject 'test '.
Server: 'smpt.mail.yahoo.com '.
Windows Live Mail error ID: 0x800CCC0E
Protocol: SMTP
Port: 25
Secure (SSL): Yes
Socket error: 10060____________________________________________
Anyone else having this problem?
Thanks nene!
I have studied the problem and the solution.
The results are displayed below.IF YOUR INTERNET SERVICE PROVIDER IS
ATT OR SBC GLOBAL
AND YOUR EMAIL CLIENT IS
WINDOWS LIVE MAIL
AND YOUR OPERATING SYSTEM IS
WINDOWS 7 HOME PREMIUM
AND IF YOU CAN RECEIVE MAIL
CAN NOT SEND to MAIL
BE SURE TO CHECK THE FOLLOWING SETTINGS:Outgoing (SMTP) server port should be 587
and CHECK the box that says "my server requires authentication".
Do NOT check the SSL box.Click APPLY at the bottom, and then close the Windows Live Mail program
and then reopen it. This should send messages in your Outbox (as appropriate).
To speed up this process, you can click on the SYNC button on the MenuBar at the top of WML.If there are no messages to send, compose a new message and send it to yourself.
You can click on SYNCHRONIZE to watch status box open and show you if it sends.
Check also sent box and Inbox for sending TEST msg.* also, if you have been told by AT & T or SBC GLOBAL who to check your email on the internet you must go through Yahoo.com and enter your full e-mail (att.net OR sbcglobal.net) and enter your log in password, then your email POP3 and SMTP settings must also include the following:
INCOMING (POP3): pop.mail.yahoo.com
OUTBOUND (SMTP): mail.yahoo.comThanks & sincerely,.
Claudia S. Cervenka, PPC
Maybe you are looking for
-
Hi, I have a D-NF340 CD Walkman. Does anyone know how to stop the constant ringing when the unit is set to pause? Thank you.
-
Why remove the Terminal Server on Windows Server 2008 Standard Server HKEY_USERS\S -? When one connects users off? I have a setting wrong? I can't find a setting that relates to this in either Terminal Server Config or Terminal Server Manager... Any
-
I have a download of media which is stuck on my player. I deleted all my pictures of songs everything, but it will come off do - not what I do.
-
HP c 4450 - impression gradually migrate out of page
Lately, the margins are migrating to the right during a print job. Printing starts fine, but little by little the left margin expands until the guy runs off the page. I have been using this all-in-one for a few years without any problems. There has b
-
You can apply stray light in the IOS (Photoshop mix) application?Thank you