wmpnetwk.exe and Zune.exe errors
I got a new motherboard (gigabyte ga-ep45-ud3p) and processor (Quad Core yorkshire 2.833 9550). After installing the drivers and others, I tried windows media running player. I had a pop indicating that media sharing is turned off, I went and activated. After I did it, I got the dreaded message. Network share W Media Player has stopped working. This message returns constantly every time I go into the options and say I'm not active. I have spent at services and tried booting in this way. After wrong with it, I tried to launch my zune software. Normally, it automatically connects but got a message saying that the feature is not available in my area. Puzzled, I close the message and connect my zune to sync. I get another message saying software zune stopped working. Gives me a 3rd choice this time (debug this program). I'm going with all 3 options for the different tests. Nothing works removing and uninstalling etc. I can't go to a previous version of media player cause microsoft doesn't let me... Whenever I try to connect or connect my zune with the software running player, the program gives me this error message. I tried the system restore. Here's what to say error messages.
Signature of the problem:
Problem event name: APPCRASH
Application name: wmpnetwk.exe
Application version: 11.0.6001.7000
Application timestamp: 47919370
Fault Module name: Indiv01.key
Fault Module Version: 11.0.6000.6324
Timestamp of Module error: 47e52dc2
Exception code: c0000005
Exception offset: 0011b32c
OS version: 6.0.6002.2.2.0.256.1
Locale ID: 1033
Additional information 1 c: 375
More information 2: b609c209d0d5efeb3cfcb425b7f84343
Additional information 3 c: 375
Additional information 4: b609c209d0d5efeb3cfcb425b7f84343
Description:
Stopped working
Signature of the problem:
Problem event name: APPCRASH
Application name: Zune.exe
Application version: 4.0.740.0
Application timestamp: 4a9e20f7
Fault Module name: Indiv01.key
Fault Module Version: 11.0.6000.6324
Timestamp of Module error: 47e52dc2
Exception code: c0000005
Exception offset: 0010b1b4
OS version: 6.0.6002.2.2.0.256.1
Locale ID: 1033
Are you sure you did a repair system/upgrade and not a startup repair? Do a repair/upgrade system SHOULD work (it's a bit like how it worked with XP - just do it differently). Here are the procedures: http://www.vistax64.com/tutorials/88236-repair-install-vista.html. If this does not work, then I fear, you should backup your data and do a clean install, because it is the only thing left to try.
Good luck! Lorien - a - MCSE/MCSA/network + / A +.
Tags: Windows
Similar Questions
-
Get the error failing wmpnetwk.exe with WHS 2011 application
I had problems with the windows media player network service on my windows home server machine. Continually, I get the following error:
Name of the failing application: wmpnetwk.exe, version: 12.0.7601.17514
The failed module name: ntdll.dll, version: 6.1.7601.18247
Exception code: 0xc0000374
Offset of vulnerabilities: 0x000000000000c4102
ID of the process failed: 0x149c
The failing application path: C:\Program Files\Windows Media Player\wmpnetwk.exe
Path of the failing module: C:\Windows|system32\ntdll.dll
(I think) as a result, I can't successfully access my home server to my Xbox 360, or new certified DLNA Samsung Blu - ray player.
I tried running sfc/scannow and it finds no problems. I checked the service has started and is configured to start automatically on startup. I restarted the server.
Help!
Hello
We have a dedicated support team that will help you solve the problems on the Windows Home Server platform. Check out the link to post the same query:
https://social.Microsoft.com/forums/en-us/home?category=WindowsHomeServer
Please let us know if you need any other assistance on Windows.
-
turn on my computer and get schvost.exe error
turn on my computer and get the error schvost.exe. its in a grey square. I have a windows xp professional. SP3. IE8. then another lights. ask the items to synchronize... Help
Hello
Please see the link that the recommendations have solved the problem:
http://social.msdn.Microsoft.com/forums/en-us/vsdebug/thread/287d95a2-8f64-437b-9d76-912febee58fd
Please report if you need help on the issue.
-
original title: freezing after login! ... disk hard dwm.exe and dllhost.exe errors. As usual load screen and then nothing can be used/open to all. Occasionally start opens and closes and nothing else beyond.
Cannot use the laptop mode safe mode with networking. Have you tried to repair registry free of bugs and using Vista install with view to repair OS repair disk, but there are a lot of people having this problem different from this problem with dwm.exe dwm.exe or versions/varieties. This is is produced immediately after the download and installation of Microsoft Updates I might add. Please can someone help? Thank you very much... LiZ :)
Never use Registry Repair programs.
They can cause more harm than good.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Understand the Extras in Windows Vista and Windows Update info is at the link above.
Remove the Vista updates; two ways to do this:
1. a System Restore to before the updates:
Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next
If you use Norton, disable it before using the system restore.
If it is impossible to enter the Normal Mode, do a Safe Mode system restore:
Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.
System restore steps according to the info above.
Also:
2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window
> then click the one that you don't want > uninstall will appear at the top > uninstall it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it
> Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".
When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.
> or if you do not need an individual > right-click on > UAC prompt > hide it
See you soon.
Mick Murphy - Microsoft partner
-
Camera Assistant Software shows CEC_MAIN.exe error
Hi, I have trouble with my webcam software.
My Camera Assistant Software v. 1.7.171.0103 didn't work. Whenever I click on it, always show the dialog box: "CANNOT EXECUTE CEC_MAIN. EXE. Please reinstall this program. I reinstall the program but always display this box. So I can't use my cam. Strangely, it works if I try the face recognition...
Please help me... Thank you very much...
Hi mate,
Firstly all what laptop, you have exactly and what OS you are using?
I already read about it here in the forum and, normally, this error message appears if a security program (e.g. Firewall) blocks this program and you will have to unlock this file in the firewall. When searching the forum I founded it and maybe it s useful to you:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=171963𩾻 -
My computer starts up and I am able to work on it, but showing the sgm.exe error
Hello
Thanks for posting in the Forum from HP Support.
The error occurs because there is a problem with this application.
I did some research and I am unable to find such a program with this name that is popular and reputable.
Having said that, I also found some virus/malware that uses this name.
Search your computer for threats/viruses using these free tools:
-> ESET Online Scanner
http://support.eset.com/kb2921/?locale=EN_US & viewlocale = en_US
http://www.eset.com/int/home/products/online-scanner/
-> HitmanPro
http://www.SurfRight.nl/en/hitmanpro
http://www.SurfRight.nl/en/downloads/
-> AdwCleaner
http://www.bleepingcomputer.com/download/adwcleaner/
If these tools find a malware with this name and extension, remove and others, also.
Please, let me know the results of the analysis. You can also provide screenshots if you want
-
AccelerometerSt.exe error on the computer Windows 10 brand new
I have the same problem that many others have with the Application AccelerometerSt.exe error. BUT, I have a brand new - 1 week old computer and it came with 10 windows already on it. I have the HP Envy x 360. How do you intend that to solve the problem. If you uninstall and reinstall Windows 10, I'll need much more detailed information. I don't know how to do this - which was the reason why I only watched computers with her already preinstalled.
Hello
Try the following.
Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.
When this has completed, restart the laptop.
When windows has reloaded, download and install the version of DriveGuard on the following link.
http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe
Kind regards
DP - K
-
Hello
I have HP Pavilion e002au laptop bought about 5 months back with Windows 8.
I get the explorer.exe error after logging in each time. The laptop seems to work normally, but can someone please tell me what this error is and how it can be eliminated?
I have an original version of Windows antivirus updates and get regularly.
Is it dangerous for the laptop?
Kind regards
Vikram P. Gupte
Hi Vikram6880,
During the execution of any type of control system, you should always back up your documents. The update affects all documents. It was simply an update of the system.
Thank you.
-
nidevmon.exe error 0xc0000142 / niusb6009 multifunction i/o
Our Labview application collects analog data using an e/s of the Multifuncion niusb6009. The application is proven and has been in production for years.
Today, the application has stopped to receive analog data. After the termination of the application, shut down our computer w / Windows XP Pro SP2.
The computer and Windows has restarted. At the opening of our LabView Application, the following error appears:
nidevmon.exe error: "the Application failed to initialize properly (0xc0000142) click OK to terminate the application.»
Scuba Steve Howdy!
Is there something that could have been changed software/hardware-wise on the machine before this error occurring? Also, what version of LabVIEW and DAQmx do you use?
This could be caused by a number of different things of nidevmon.exe. Please look over this article in the knowledge base for possible solutions to the problem.
Kind regards
-
Creation of LV8.5 application EXE, Error 1502
Hello
I am building an application .exe of my code of LabView8.5. This is my first time doing so.
My VI program works very well and has no errors.
However, when I try to compile the application, I get the error
Error 1502 to the node invoke in AB_Source_VI.lvclass:Close_Reference.vi-> AB_Build.lvclass:Copy_Files.vi-> AB_Application.lvclass:Copy_Files.vi-> AB_Build.lvclass:Build.vi-> AB_EXE.lvclass:Build.vi-> AB_Engine_Build.vi-> AB_Build_Invoke.vi-> AB_Build_Invoke.vi.ProxyCaller
Possible reasons:
LabVIEW: Cannot save a bad VI without its schema.
Method name: Save target: Instrument
To my knowledge, there is no bad VI, like the VI to run ok in LabVIEW!
Thanks for your help,
David
Construction of an exe does not actually include the dependencies, so you will be required to ensure that the dll is present on your target computer or build an installer that automatically places the dll on the computer.
-
While my pc was going through updates to MS, he projected blue. After the reboot, I now get mscorsvw.exe error
Hi frank platt,.
What the full error messages you found?
After return from error messages full so that we can help you better.
I suggest you to reset the Windows Update components. Then try to install an update at a time and checking update problem. After return to status so that we can help you better.To reset the Windows Update components visit the link below and click on solve this button / follow the given steps to repair it yourself.
http://support.Microsoft.com/kb/971058Hope this information is useful.
Umesh P - Microsoft Support -
I can't install WGAPluginInstall.exe error 0 x 80070003 help
HI the FRIENDS MY SYSTEM IS SICK, I CAN NOT INSTALL WGAPluginInstall.exe ERROR IS 0 x 80070003 I CAN'T DOWNLOAD ANY FILE WITH DOWNLOAD MANAGER (CONNECTION WITH the SERVER IS LOST) I CAN'T OPEN the DOWNLOAD of PAGES WEB BROWSER VIEW WITH BROWSER WEB MY ANTI VIRUS IS up to DATE I am not CONFUSING WHAT IS THE PROBLEM
Amin,
Remove the download directory and then to return to the update sites. to do this, follow these steps:
1. stop the automatic updates service. to do this, follow these steps:
a. Click Start, click Run, typeservices.mscand then click ok.
b. Automatic Updates service right click and then click on stop.
c. minimize the software component services snap-in.
2. rename the c:\Windows\SoftwareDistribution directory. to do this, follow these steps:
a. Click Start, click Run, typecmdand then click ok.
b. type cd %windir%, and then press ENTER.
c. type ren C:\Windows\SoftwareDistribution SDTemp, and then press enter
d. type exitand press ENTER.
Note when you delete the folder % windir%\softwaredistribution, the history list is erased from the section "review updates" site web windows update. This action will not affect the updates installed on your computer. subsequent updates will appear in the history list.
3. start the automatic updates service. to do this, follow these steps:
a. expand the component services snap-in.
b. right click on updates service automatic and then click Start.
c. close the window of the software component services snap-in.
4. visit the website of windows update, the microsoft update web site or the server wsus again and then download an update.
5. If you still receive the same mistakes, make sure you have correctly completed steps 1-3.
6. If you can't always install the update, see the following microsoft knowledge base:
http://support.Microsoft.com/kb/906602/ installation problems troubleshooting windows update, microsoft update and windows server update
-
Daemonu.exe error turns off my computer. How do fix?
Often, I get an error message after my computer shuts down-Daemonu.exe error. Is there something to fix this problem? Thank you.
Hello
It's the Nvidia Update Manager, so you must check with their Support and Forums.
Would be a good idea to update the driver or re - install the last longer if not recent exists.NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
http://www.nvidia.com/download/index.aspx?lang=en-usNVIDIA Support - check with the support that she might be a known issue
http://www.nvidia.com/page/support.htmlNVIDIA forums - also check for the forums it might be a known issue or others likely to have
http://forums.nvidia.com/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
application spoolsv.exe error.
I have windows xp and I get the application spoolsv.exe error. It gives me the following message is displayed: the Instruction at 0x01fb0374 referenced memory at 0x1fed12c0 memory cannot be read. "I don't know what to do about this. Help, please. * E-mail address is removed from the privacy *
Hello
1 did you change on your computer?
2. what service pack is installed on your computer?
3. when exactly did you receive this error message?
4. What is the brand and the number of the printer model do you use?
Method 1:
I suggest you try the steps suggested by Anthony - Support Engineer from the below mentioned link and check if it helps. These steps are for Windows Vista and should work as well on Windows XP.
Method 2:
You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."
http://support.Microsoft.com/kb/810894
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,
Method 3:
I also suggest you to follow the link and check.
Resources for the resolution of the printer in Windows XP problems
http://support.Microsoft.com/kb/308028
See also:
How to cancel printing or to delete a print job that is stuck in the print queue in Windows XP
http://support.Microsoft.com/GP/pc_print_methoddstoptheprin
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
-
I currently have LabVIEW 2009 installed and NiDAQ 9.0.1. I am trying to connect to cDAQ 9174, with the NI9401 and NI9263 modules. When you connect the cDAQ, that an error occurs:
nipalsm.exe error
The instruction at 0x6efdfde3 referenced memory at 0 x 00000034, the memory could not be 'read '.
The cDAQ appears in the list of devices, but fails self-tests and nor modules are recognized. Also the cDAQ access to the list of devices cannot deleted even before the device is connected.
I tried to use the program to software installation OR repair NIMAX and tried to uninstall and reinstall absolutely everything. (even on the complete reinstall the cDAQ device seems not connected on the list of the devices before connecting for the first time)
Maybe you are looking for
-
Want to see beyond the web in history pages as I did before El Capitan
Since the installation of the El Capitan on my iMac, I get only a blank screen blank when I click on history, but other browsers show me past, websites that I sent to as before.Sign In says it accepts only usernames without a space, but Mozilla just
-
contribute to creating simple equation in applescript
Hi all Can someone help me create a script for a simple mathematical equation. (A) variable = figure with a 'total plate height' prompt before entering the figure then SUBTRACT the variable number (B) with a 'total height of jobs' command prompt befo
-
Lost password and no email access
Hi, since I formatted my laptop I was not able to connect to my Skype account (it automatically connected to Skype because it remember my password). Now, I can't retrieve my password since I don't have access to the email associated with my Skype acc
-
How good/bad is Reg Zooka?
How good/bad is Reg Zooka and other registry cleaners? Do I still need to do anything in the registry? I read mixed reviews.
-
Registry backup and restore in Windows Vista
Original title - backup and restore I need to get these procedures to back up and restore the registry in Windows Vista