Wndr3400v3 - router restarts constantly

Similar Questions

• Satellite A100-785: router restarts automatically when the wireless network card is on

  Recently,.
  Once, I turn my adapter wireless for my laptop 'ON' and it starts to connect to my router 3com officeconnect wireless.
  I found that my router restarts automatically.
  This happens each and every time I turn on my laptop with the wireless adapter ON.

  I use the Satellite A100-785 PPPoE ISP with WPA/AES encryption enabled on the new MS Vista platform.
  All drivers updated to the latest versions, and the wireless signal is Excellent.

  Any suggestions that could be the reason or any recommendation to begin to investigate the matter?
  Everything will be highly appreciated. Thank you

  Once again; Your WLan router restarts (reboots) when you turn on the WLan on the A100 Satellite Map. Am I wrong?

  Well, it's strange, but to be honest I n t see a problem with the laptop but with the router. I would recommend controlled again the unique WLan router configuration.

  Good bye

• Cisco router restarts randomly with Bus error

  Cisco router restarts randomly with the following error:

  System has been restarted by error of bus to PC 0x4183614C, speech 0 x 95848 at 09:30:28 UTC Tuesday, April 23, 2013

  I've pasted below see the chimneys and release the version.

  view the stacks

  
  

  Minimum factory chimneys:

  Format name / free

  5396/6000 inspect Init Msg

  Subsystem SPAN 5368/6000

  58920/60000 EEM Auto record Proc

  Automatic start of 4772/6000 upgrade process

  DIB 5164/6000 error message

  HAND OF SASL 5396/6000

  4968/6000 LICENSE DEFAULT AGENT

  5368/12000 Init

  4216/6000 update prst

  4384/6000 VPN_HW_MIB_CREATION

  5188/6000 RADIUS INITCONFIG

  Update process random rom 2128/3000

  8356/12000 SSH process

  Stats URPF 5316/6000

  Interruption of battery level:

  Level named format / unused

  Network interfaces 1 1484828 6284/9000

  2 3264990 8548/9000 DMA/Timer Interrupt

  3 1 8388/9000 PA Int management Manager

  Console 4 115 8612/9000 Uart

  External interrupt 5 0 9000/9000

  NMI 7 223352 8564/9000 interrupt handler

  Spurious interrupts: 11

  System has been restarted by error of bus to PC 0x4183614C, speech 0 x 95848 at 09:30:28 UTC Tuesday, April 23, 2013

  Software of 2800 (C2800NM-ADVSECURITYK9-M), Version 12.4 (24) T, RELEASE SOFTWARE (fc1)

  Technical support: http://www.cisco.com/techsupport

  Updated Thursday 25 February 09 17:55 by prod_rel_team

  Image text-base: 0 x 40011240, database: 0x42B41940

  The failure of the system stack trace:

  FP: 0X472252B8, RA: 0X4183614C

  FP: 0 X 47225310, RA: 0X418312F8

  FP: 0 X 47225348, RA: 0X41647DC0

  FP: 0X472253A8, RA: 0X4164A8F4

  FP: 0 X 47225428, RA: 0X4164B248

  See the version

  
  

  Cisco IOS software, 2800 Software (C2800NM-ADVSECURITYK9-M), Version 12.4 (24) T, RELEASE SOFTWARE (fc1)

  Technical support: http://www.cisco.com/techsupport

  Copyright (c) 1986-2009 by Cisco Systems, Inc.

  Updated Thursday 25 February 09 17:55 by prod_rel_team

  ROM: System Bootstrap, Version 12.4 (1r) [hqluong 1r], RELEASE SOFTWARE (fc1)

  availability of Cisco is 28 minutes

  System returned to ROM by bus to the 0x4183614C PC error, address 0 x 95848 at 09:30:28 UTC Tuesday, April 23, 2013

  System image file is "flash: c2800nm-advsecurityk9 - mz.124 - 24.T.bin".

  This product contains cryptographic features and is under the United States

  States and local laws governing the import, export, transfer and

  use. Delivery of Cisco cryptographic products does not imply

  third party approval to import, export, distribute or use encryption.

  Importers, exporters, distributors and users are responsible for

  compliance with U.S. laws and local countries. By using this product you

  agree to comply with the regulations and laws in force. If you are unable

  to satisfy the United States and local laws, return the product.

  A summary of U.S. laws governing Cisco cryptographic products to:

  http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

  If you need assistance please contact us by mail at

  [email protected] / * /.

  Cisco 2821 (revision 53.51) with 1036288K / 12288K bytes of memory.

  Card processor ID FCZ1017732F

  2 gigabit Ethernet interfaces

  2 modules of virtual private network (VPN)

  Configuration of DRAM is wide with parity 64-bit capable.

  239K bytes of non-volatile configuration memory.

  250880K bytes of ATA CompactFlash (read/write)

  Configuration register is 0 x 2102

  You want to use the tool interpreter of output for this work:

  http://www.Cisco.com/pcgi-bin/support/OutputInterpreter/home.p

  For more information about the resolution of crashes, see this article:

  http://www.Cisco.com/en/us/products/HW/IAD/ps397/products_tech_note09186a00800b4447.shtml

  In this case, it looks like CSCsy09250, described here:

  http://www.Cisco.com/en/us/products/CSA/Cisco-SA-20100324-SCCP.html

  You should contact Cisco for the software updated by following the instructions of this bulletin.

  That crash possibly caused by part of sone intentionally sends out packets malformed to your device, so if you have reason to believe that someone in your community could run metasploit or similar "Penetration Testing" tools, you can look into that as well.

• Satellite A500-1GF - Nvidia display driver restarts constantly

  Hello

  I have a Satellite A500-1GF with the latest Nvidia drivers installed and it the driver crashes constantly. It gives a black screen, a pop-up message and then restarts the driver. After a few minutes it happens again.

  Type of card is Nvidia GeForce GT 330 M
  257.21 driver
  Windows 7 64 bit

  Google gives me hundreds of visits but no solution.

  Someone at - it an idea?

  TX,

  Roel

  Hey Buddy,

  > 257.21 driver
  That s not an official version driver Toshiba. The new version of driver for your Toshiba laptop screen is 8.16.11.8875.

  You must install this driver because it s pretested by Toshiba.

  Furthermore, I have read in the forum that the latest display driver Toshiba could solve the problem.

• White LED of Ethernet to the router flashes constantly (to about 5 flashes per second)

  The Internet on my router Netgear (R7000 Nighthawk, AC1900) white LED flashes constantly (about 5 times per second), and it is originally the link on my modem light blinks constantly. All started about four days ago. I thought that my modem was defective, but I spoke with my ISP technical support who said it was the router that has been at the origin of the modem LED blink. I unplugged the power supply to the router, but when I plugged it in the problem has not been resolved. I also reset the router (using the reset on the back of the router) but that has not solved the problem. Any help would be most appreciated. Thank you.

  View that statistics is one of the purple buttons under the Internet Port pane.

  

• Vista won't start after the last update of Silverlight - restarts constantly

  I installed the latest version of Silverlight from Microsoft Update, July 21.  There are 2 updates, but the other would not move.  My computer worked nomally and later when I stopped it, I got the "Configuring updates... do not turn off your computer" message.  It seemed to take a while, so I went to bed and the next morning, I saw that the computer had finally stopped.  I started it and I got the message "configuration updates stage 3 of 3." 0% complete.  Do not turn off your computer. "After anywhere from 10 seconds to a few minutes, it restarts.  She's constantly - he keeps just reboot and it displays the updates configuration message.  In the System Recovery Options, Startup Repair indicates that everything is OK.  "System Restore" to go to the restore point previous does not work.  What can I do?  The only other option and restore utility is all erase and install the drive from the factory.

  I have Windows Vista, the latest service pack and updates.  I have F-Secure anti virus/firewall.

  He has also failed to the previous Microsoft Update a week or 2 but it gave an error code of that time.  I looked at the error to Microsoft code and it says that the update log was full and there was a command to enter to remedy.  I did that and installed the update and everything was fine.  Unfortuately I have more error code or order more.

  Perhaps related to this problem?  My computer is pretty much dead now after Silverlight updated because it constantly restarts.

  Don't boot from the XP CD.

  Do an ERD of VistaBootable of the info below:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  Mick Murphy - Microsoft partner

• Sansa e250r restarts constantly

  I read a lot of posts on the Sansa E250 reboot constantly and have read that installing the new firmware should take care of this.  My computer does not recognize my Sansa because my Sansa will show the first screen (Sansa), but when he goes to the second screen (Sansa Rhapsody) it freezes and restarts continuously.  I have reset the firmware by following some instructions I read on a forum: with the system off, hover over the hold button, press and hold the record key, connect to computer, release the button the recorder, drag the downloaded firmware (for my Sansa E250R I found only version 1.0.2.165) to 16 MB icon in the my computer tab, then I unplugged my Sansa and it says that the firmware has been installed successfully but the player has restarted and went into the same restart mode.  So the update of the firmware does not seem to do the trick, does anyone have any additional info that could solve this problem?  I would like to call Tech Support, but I am currently in England and cannot remind States and have not found a number of tech UK.  I need this MP3 player like you wouldn't believe.  Any help would be greatly appreciated.

  
  

• iPhone restarts constantly

  Hi all! I'm from Russia and I ask to forgive me for bad English

  I want to share with you my problem. I have installed ios 10 public beta 3 and I'm constantly hidden hardreset unit. It is very uncomfortable for me and I would like to get rid of him. It is worth noting that this problem than me. on ios 9 has had this problem and the ios 10, it appeared suddenly. Help, please. Thanks for the reply!

  https://beta.Apple.com/SP/betaprogram/FAQ

  How to make a version of iOS on my iPhone, iPad or iPod touch?

  If you want to return to a previously published version, you must first delete the beta software, and then re - install the latest version of iOS and finally restore from your backup iTunes saved previously.

• Computer restarts constantly a1644x

  I have a HP a1644x and when I got home from work whenever I start it it goes to a black screen where it says choose to run in safe mode, safe mode with network, last working configuration, or start normally.  Whatever one I choose if it is right to normal mode or safe once I chose, it just restarts and charge and did the same thing again.

  Try to remove the memory and reinstall it.

• Computer restarts constantly

  Hello

  Just bought a HP dc7900 Desktop & 22 inch monitor package
  Model: NA190PA + GX007AA

  It was working properly for a few weeks until last night when he came up with the following error message

  The system has recovered from a serious error

  Error signature: BCCode:s4 BCP1:00000003 BCP2: 88B8CAA8 BCP3: 88B8CC1C BCP4: 805 D 1650 osv:5_1_2600 product st:2.0 256_1
  

  Shortly after the computer restarts, and then did the same thing again and again, I read through some of the posts on this topic and most of them say to reinstall the ram and see if that fixes the problem.   I will try that and see if it works, but I was wondering if anyone knew another solution without the need to do so.  I'm not very comfortable with computers and therefore subscribe to the ram is a bit intimidating.

  Any help would be greatly appreciated.

  See you soon

  Ryan

  Just in case where someone has the same problems, HP has accepted fault after about three weeks and replace with a new PC

• Computer restarts constantly how he stop?

  Everything was fine last night. Woke up this morning and the computer restarts continually. I am running windows xp. I can restart in safe mode but under normal reboot it keeps just reboot. I tried disk cleanup, defragmentation, System Restore (that never works) system restore.  It took hours to do a recovery, because it would only begin in the process, then it restarts but eventually be obtained throughout recovery and problem is still there. Turn off completely and let stand about an hour started it back up and the problem is still there. Does anyone have any suggestions?

  First you need to understand why it is always set to zero, then you can stop it.

  If you choose to start safe mode, you can choose to start in disable automatic restart on system failure mode so you can see what is happening.

  Here are enough details to help you move forward in the right direction:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If your system uses to work properly, what do you think might have happened to her since the last time, that it did not work properly?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

• Windows XP restarts constantly (now with BSOD error)

  Hello

  I had problems with my operating system and the chances are that a certain registry cleaner could be blamed.  Last night, I had iTunes running and it suddenly crashed. I closed it, has tried to re - open when my third party firewall said that it was an unrecognized file who wanted to access the system.  Not much, she did this with a majority of my programs.  5 minute or two later, the system rebooted by itself (it was a failure of the system, because it's the only time where she did this).  During the start-up phase, the system ran CHKDSK and removed/fixed several issues.  It's about three times until he finally took on the desktop.

  I shut down Windows for a few hours and when I got home, I tried to run my anti-virus and Anti-Malware but when be began to analyze the system will re-start.  This is when I started to get worried.  I ran registry cleaner and it has removed several values. (I checked out which one and they looked like values ok to remove).  When I restarted Windows, I went in Mode safe and has tried to run CHKDSK again, rebooted the system, and it crashed during startup.  (I don't remember).

  I am now in the continuous loop of this crash/restart during the start-up phase.  When Windows asks me what start I want to run, it doesn't matter which one I pick because that all lead to the same end.

  I went through the portico of Microsoft on how to replace the file kernel32.dll (thinking that might be the problem) and after all was said and done, I'm back where I started.  I have run CHKDSK through the Recovery Console, twice, and none has remedied the situation.  I don't have the automatic recovery Points.

  My next step is to follow the Microsoft guide "How to recover from a corrupted registry that prevents Windows XP startup".  But I'm a little unsure if I can actually follow through manually.  (Since the guided help will not download).

  If this does not work, or I don't attempt it, I could just run the operating system of the drive and hope that my save files and whatnot are intact.

  After two weeks, I was able to solve the mystery of myself.

  I downloaded the "Microsoft Memory Diagnostic" test and he said one of my RAM sticks has no tests.  I removed a particular, and everything started working again properly.

  I want to thank all the people who tried to help out me.

• Windows automatically restarts constantly, cannot access the system restore point, cannot access the computer in safe mode

  Hi all

  For the not 24 hours I tried to access my computer in normal mode. When I turn on the pc, it says "configuration data 1 of 3 steps...". 0% complete"he never spent 0% and within seconds, it automatically restarts and starts again. It's so frustrating! I have a windows vista pc (purchased in ' 06). I can only access my desktop in SafeMode.

  I tried to perform a system restore, but not like he says "recovery disk is not the restore point selected. What should I do? I tried to manually create a restore point, but cannot access the system and Maintenance, while in safe mode. I can't do anything but literally access the internet. How can I get Windows back to factory settings it is with these limited resources? I have a Dell reinstallation DVD.

  I searched my programs and found that recently Windows automatically updated and downloaded "Microsoft Powerpoint Viewer" and "for 2007 Office system Compatibility Pack '. Now, I think it has something to do with it, because they were the most recent updates, before the pc crashed. But I also fear that it may be a virus, which has completely hijacked this PC. How am I supposed to get rid of a bug, if I can't even get the necessary antivirus?

  Sorry for the ranting, but it's so stressful when my pc is completely down. Please, please please help me. Thank you in advance for reading this same!

  Arianne

  Hello

  you talk about restore and system recovery disc in the same breath

  they are 2 different things

  and you can NOT create a restore of yesterday and today!

  yesterday is gone

  If it does not already; You can't do

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  The malware removal:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Reinstall vista from Dell DVD

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

• When starting my computer, it restarts constantly

  Original title: START PROBLEM

  during the priming permanently back on for 5 or 6 times.  Then start correctly. Works properly in safe mode

  Hi SKYEN,.

  ·        You receive an error message or error code after you start on the desktop?

  1. follow the steps below to disable the auto restart to the failure of the system and check if you receive an error message:

  a. click on start

  b. right-click on computer

  c. click Properties

  d. in the System Properties window

  e. click Advanced system settings

  f. click on the Advanced tab

  g. uncheck: automatically restart

  h. when the problem occurs, you will receive message or error post back with the same error code.

  2. also try to start the computer in clean boot in safe mode, restart the computer and check the results.

  Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135

  If you are able to work with the mouse, then you can continue with step 2 from the link above.

  Make sure that you reset the computer in normal mode in step 7.

  Go back with the results.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• stops and restarts constantly

  my laptop freezes, disconects, restarts a half-dozen times while I'm trying to post messages on a site that I like to visit. The web site is Canadain metal detecting Forum. http://www.canadianmetaldetecting.com/phpBB3/viewtopic.php?f=202&t=34640   Seems ok when I'm searching around the site, but when I try and post a message., everything starts screwing

  Welcome to the HP forum!

  I won't even look at a site that does this - but you can try a different browser to start.

  For example, if you use Internet Explorer, then download and install Firefox and try that.  As you experience these severe problems with the site, I might suggest that, after installing Firefox itself, you first the security of Firefox addon 'No-Script"to protect you.  Then, when you arrive at the site, you click on the No-Script Options and you can allow 'Temporarily' Web site scripting access on your computer.  If there are several sites listed in the No-Script option, then 'Allow temporarily' a Web site at a time.  See what's happening.

  Good luck!