WNDR3700 starts so that the connected lan cables.
Hi people,
I have a wndr 3700 for a long time. Lately, every time I wanted to turn it off, and return is on, it does not start unless I have unplug all lan cables and wait for it to start. It is very stange, because there is no problem with it. Once it starts, it works fine. but I have to disconnect the cables and wait for the boot sequence.
no idea how I can fix this problem?
Thank you.
I think I did. I flashed with ddwrt and now it starts at each connection to the local network. so it was probably a software issue or a hardware but ddwrt can handle or ignore it. I'll try the official fw to see if the old fw was just tired :)
Thank you all.
Tags: Netgear
Similar Questions
-
Original title: Please help!
I bought a USB - LAN cable, but when I try to use it, this thing came out, "device driver software was not properly installed", then what should I do to use this cable properly? l
Hello
Thanks for posting in the Microsoft community!
You have reached the right forum for your question. If I understand correctly, you receive error software device driver has not been installed successfully using the USB LAN cable. I suggest you follow the troubleshooting steps to check if this may help.1. don't you make changes on the computer before the show?
2 are you able to get any USB devices to work in USB ports?Check the status of the device and the driver Version:a. open byclicking the button start Device Manager, click on Control Panel, clicking system and Maintenance, and thenclicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
b. double-click the category containing your device driver and thendouble - click the device name.
c. check the status of the device tab click on driver tab arencontre, checkDriver provide, Date of the driver, the driver Version, digital signer. Please provide this information.
d. click OK, exit Device Manager.
Method 1:
You can update the drivers on the manufacturer's Web site and check.http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyMethod 2:
Use Windows Update to find a device driver
Note to use Windows Update, you must be connected to the computer as an administrator:Follow these steps to use Windows Update to find a device driver: a.Click Start, click all programs and then click Windows Update.If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
b check the updates.
AA,a,AB,b,c.to determine if there are updated drivers, click on view available updates.If updates are available, click the driver you want to install, and then click on install.If you are prompted for an administrator password or a confirmation, type the password, or click on continue.If you need further assistance, please answer and we will be happy to help you.
-
Original title: windows xp.
reinstalled xp and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?
Hello
Go to the website of your computer manufacturer > drivers download Section > put your computer model number > operating system > Search adapter network, pilots etc. for her.
Get graphics, sound while you're there.
You should always do a reinstallation.
Use the computer that you use to make the foregoing > download and save in this office > copy of Flash Drive > then install in another computer.
See you soon.
-
I worked on the Web site of our Church and all of a sudden this week, my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?
The error message "the connection was reset" can be caused by a bug for the attack of the BEAST fix (browser exploit against SSL/TLS) that the server does not support.
-
I try to connect my apple TV. I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set. I don't know what I should do. Thanks in advance.
Date and me are dealt with by the network. Try restarting your router/modem...
Verify that DNS is set to auto
Make sure port 123 is open on the router (refer to the manual of the router to you)
-
Original title : Could not get the update of windows
I use firefox as my web browser and I can't on the Windows Update site, it just telling me that the connection was reset. I click on try again, but just showing the same thing please help
What type of Internet connection you are on, wired or wireless? If you are on a wireless connection, try to switch to a wired connection and try the download with Internet Explorer.
1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336> [ignore the title, etc.], reject modes and then AGGRESSIVE and pop-up troubleshooting automated, then run difficulty he 50202 in DEFAULT. [Ignore warnings "Not recommended", etc.]
2. restart & test.
Full disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP)
UTC/GMT is 16:46 Tuesday, April 24, 2012
-
I just bought the New Avengers movie with the digital copy. I moved it and now I can't watch it. I have "Windows Media Player cannot play the protected file. Drive detected that the connection to your hardware may not be safe. "when I click it. What now?
Hi Jason,
Thanks for asking this question to Microsoft Community. I'll try and help you resolve the problem; However, I will need to ask you a few questions.
Are you able to play other movies without any problem? Have you done a recent software or changes to the material on the computer?
Here is a link with some good steps. Go through it and check if it helps. Also check out this article and see if it helps.
Also, see the steps in the article and see if it helps.
Hope this helps and let us know if you need more assistance. We will be happy to help you.
-
Windows 8 is connected to the Internet and always says that the connection is limited
Hello
For the last month, my computer is connected to the internet, but it is still saying that the connection is limited. Can I'm moving very well, but I'm worried because I know that something is wrong. I have windows defender and Malwarebytes. I ran the resolution of problems, and he can't find the problem. Help, please! Thank you very much!
I had already run the troubleshooting utility before asking this question. I was using internet just fine, but when I flew over my connection, it says that the connection was limited. He said not limited down in the status bar. He said only when it jumps. My PC has just crossed several updates to 8.1 which seems to have fixed? However, I use the PC for 15 years and have never had this problem.
-
Cannot connect to internet after start - found that the firewall is not enabled
Original title: when the pc is turned on, unable to connect to the internet, found the firewall is not turned on. After repeated clicks, it finally works
When the pc is turned on, I can not connect to the internet. I found that the firewall is not enabled. went to the control panel and clicked on the firewall and got the message that he could not appear, also could not click the security icon. After having repeated clicks and play with him, he finally turns on and I can use the pc normally. also now when I go into the control panel I just get a list up and down things on the control panel. used to occupy the entire screen from left to right. in color, maybe these two things are related, I do not know
When the pc is turned on, I can not connect to the internet. I found that the firewall is not enabled. went to the control panel and clicked on the firewall and got the message that he could not appear, also could not click the security icon. After having repeated clicks and play with him, he finally turns on and I can use the pc normally. also now when I go into the control panel I just get a list up and down things on the control panel. used to occupy the entire screen from left to right. in color, maybe these two things are related, I do not know
It's just a detailed view...
I suggest some standard maintenance and cleaning which will generally help as you allow to get acquainted with your machine so that you can restrict the possibilities...
Search for malware:
Download, install, execute, update and perform analyses complete system with the two following applications:
Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)
Search online with eSet Online Scanner.
The less you have to run all the time, most things you want to run will perform:
Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.
You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.
Do a house cleaning and the dust of this hard drive:
You can free up disk space (will also help get rid of the things that you do not use) through the following steps:
Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.
If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
http://www3.TELUS.NET/dandemar/spack.htm
(Especially of interest here - #4)
(Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning
How to use disk cleanup
http://support.Microsoft.com/kb/310312You can disable hibernation if it is enabled and you do not...
When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:
-Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
-Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
-Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.You can control the amount of space your system restore can use...
1. Click Start, right click my computer and then click Properties.
2. click on the System Restore tab.
3. highlight one of your readers (or C: If you only) and click on the button "settings".
4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
5. click on OK. Then click OK again.You can control the amount of space used may or may not temporary Internet files...
Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...
-Open a copy of Microsoft Internet Explorer.
-Select TOOLS - Internet Options.
-On the general tab in the section 'Temporary Internet files', follow these steps:
-Click on 'Delete the Cookies' (click OK)
-Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
-Click OK.
-Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
-Once it's done, click OK, close Internet Explorer, open Internet Explorer.You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:
CCleaner (free!)
http://www.CCleaner.com/
(just disk cleanup - do not play with the part of the registry for the moment)Other ways to free up space...
SequoiaView
http://www.win.Tue.nl/SequoiaView/JDiskReport
http://www.jgoodies.com/freeware/JDiskReport/index.htmlThose who can help you discover visually where all space is used. Then, you can determine what to do.
After that - you want to check any physical errors and fix everything for efficient access"
CHKDSK
How to scan your disks for errors* will take time and a reboot.Defragment
How to defragment your hard drives* will take timeCleaning the components of update on your Windows XP computer
While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.
Download and run the MSRT tool manually:
http://www.Microsoft.com/security/malwareremove/default.mspx
(Ignore the details and download the tool to download and save to your desktop, run it.)Reset.
Download/install the latest program Windows installation (for your operating system):
(Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
(Download and save it to your desktop, run it.)Reset.
and...
Download the latest version of Windows Update (x 86) agent here:
http://go.Microsoft.com/fwlink/?LinkId=91237
... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:Close all Internet Explorer Windows and other applications.
AutoScan--> RUN and type:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
--> Click OK.(If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...
Reset.
Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
How to reset the Windows Update components?Reset.
Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:
Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.
If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.
-
Each site indicates that the connection is not approved
Firefox has been very slow, so I did a restore. Now, all the sites that I try to go to-including the site in Mozilla support - says the connection is not approved. How can I fix this and again to solve the problem of slow browser?
And now I get a message from script is not responding... that is IF I get on the site.
-
Can not receive e-mail, that the connection to the server has failed.
When I click on send and receive in my windows mail I get this error message from the connection to the server has failed. Account: 'mail.sasktel.net', server: 'mail.sasktel.net', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 10061, error number: 0x800CCC0E
Contact technical support of Sasktel to aid. MS - MVP - Elephant Boy computers - don't panic!
-
TECRA A3 - started as disconnected connected LAN cable
Hello
because I got my TECRA A3-152, I experience the network at startup card does not recognize the network cable. The cable network is reported as disconnected. Only after manual toggle the NIC is recognized the cable and network card works fine.
OS is XP Professional version 2002 service Pack 2 (original English installation).
NIC: Marvell Yukon 88E8036 PCI-E Fast E with driver version 7.29.4.3 MarvellHello Antonio
It's a very strange question, and I've never heard of this. Anyway, the fact is that you have the most recent driver LAN. I put t know your personal settings, but maybe it's because of some other software you use in your business or whatever.
To be sure if there is a serious problem, it will be interesting to know if the same thing happens with the factory settings. If there is any chance trying to get second HDD and preinstall the unit with the recovery image. If the problem persists perhaps is the card itself is defective. In this case just ASP may do other tests to find out what evil is.
Sorry, but I don t has a different idea.
Good bye
-
Downloads fail when the connected HDMI cable
Since FF26, whenever I plug my my laptop HDMI cable to switch the output on my TV screen or pull on the cable, all my current downloads fail.
Any suggestions why this could be would be very appreciated!Hello z_smith,
Please contact the Mozilla Support.
Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables some settings and disables most Add-ons (extensions and themes).
(If you are using an additional theme, place you in default theme.)
If Firefox is open, you can restart in Mode without failure of Firefox in the Help menu by clicking on the restart with the disabled... modules menu item:
If Firefox is not running, you can start Firefox in Mode safe mode as follows:
- On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- On Mac: Hold the option key during the startup of Firefox.
- On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
(you may need to specify the installation path of Firefox for example/usr/lib/firefox)
Once you get the pop-up, simply select "" boot mode safe. "
If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
When find you what is causing your problems, please let us know. This might help others with the same problem.
See you soon,.
Patrick -
Satellite A300 - lack of sleep/hibernate with connected LAN cable
Hello
I've owned a 1FZ A300 for a few weeks and unfortunately it did not go into sleep mode or hibernation while the ethernet cable from the router is plugged in, even with other programs stopped.
(Previously, I used an other non-Toshiba notebook with no problem)
I tried upgrading the BIOS as suggested in other threads, but it is newer that what is available on the Web site.
Everyone knows about this problem?
Any advice would be greatly appreciated.
regs
MikeHello Mike ;)
I wonder what you do with your laptop. I have Satellite A300-1LI in front of me and standby/hibernation work correctly. Last week, I tested the portable functionality under Windows XP Home edition and I didn't notice any problems under Windows XP Home edition either.
Now I have Vista (recovery image) once again and it works well. Can I use FN + F3, F4 with no problems.
Please note that my Satellite A300 is permanently connected to the local network. I use it for my work.The question is: have you noticed that on the first day?
-
to disable the properties button on the connections LAN, so the settings cannot be change
Disable the properties button in the settings of local network in XP
Hello...
I have this problem, I want to disable the button of properties on connections to the LAN so that settings cannot be changed, I know I can just change the user limited, but I need account or an administrator account, the problem is that my users already know how to change the IP address to connect to the Internet.
So I already do a little research in google and microsoft and he said: I need to go to the gpedit.msc and go to 'Access user, administrative templates, Network Configuration, and then select network connections' but my computer doesn't have the "Network connections" folder, so I try in regedit will "-> HKCU-> software-> network Microsoft Windows-> CurrentVersion-> policy->" and once again I have no options 'Network '. , so I create under the policies of the 'touch' 'Network'... and the 'DWORD' 'NoNetSetup' and restart the PC... but it just doesn't work.
Any idea? ... I really really need this... BTW, all customers are WinXP.
Thanks in advance!
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:
http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro
Maybe you are looking for
-
I put my pages in tools/options/general (use current pages) after, of course, before defining them in their tabs. (mail, weather, etc.) After leaving Firefox and coming back, home pages I put flash briefly, but then go back to "show my windows and ta
-
Two DMA FIFO fill and asynchronous playback?
Hello I work lately on the Labview for my system which includes the acquisition of data from two sensors in FPGA vi and communicate to RT vi, where I treat the two sensor data and subtract. I am facing a problem of synchronization. I tried 4 data poi
-
How to connect computer laptop windows 7 Desktop on a cable modem wireless
I have a windows 7 PC connected to a cable modem. It has an attached USB HP printer port. Can I connect an HP laptop running Windows 7 wireless without router?
-
PIVOT and string concatenation
Hi everyone ,I would like to use a pivot query to build a report .is it possible concatenation in Pivot report.My requirement isVinoth RAM Sam Rahul Vimal ArunVisitorsNeo tools / connections of mercury / R.Industries / LAU /ForgeFittings of mercury /
-
HelloI did a file with the timeline with 3 layers, one of them, a short video.I need to post it on facebook.I chose the export option, 24. 720 p, but the file is very big for Facebook, about 10 mega!and if I choose a lower option (for the Iphone, for