wnr2000v4 has stopped working. I need help tech for Dummies

Similar Questions

• BearShare has stopped working I need help?

  BearShare has stopped running a microsoft windows error pops up saying A PROBLEM CAUSED PROGRAM STOP WORKING CORRECTLY THE. WINDOWS WILL CLOSE THE PROGRAM AND NOTIFY YOU IF A SOLUTION IS AVAILABLE. I did almost everything remains to be done. Any suggestions? I have Windows Vista.

  BearShare has stopped running a microsoft windows error pops up saying A PROBLEM CAUSED PROGRAM STOP WORKING CORRECTLY THE. WINDOWS WILL CLOSE THE PROGRAM AND NOTIFY YOU IF A SOLUTION IS AVAILABLE. I did almost everything remains to be done. Any suggestions? I have Windows Vista.

  Contact support for the application giving you trouble.

• In Vista, error "FINDFAST. EXE has stopped working and needs to close. "

  I get continually comes a msg as FINDFAST. EXE has stopped working and needs to close. What is this reference to? Liu

  Hi LaurieHead,
   
  -When exactly you receive this error message? It is to start the computer or when starting any application?
   
  We will put the computer in a clean boot state to identify the application at the origin of this problem:
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Windows Explorer has stopped working and needs to close"error message while opening the control panel in Windows 7

  Original title: "Windows Explorer has stopped working and needs to close" Windows 7

  Help, everytime I try to go to the Control Panel, I get the message "Windows Explorer has stopped working and needs to close"

  
  I searched some other forum posts and can't find anything that works

  I tried using my guest account

  Ran antivirus/spyware

  Disc chk

  scannnow

  shooting and antivirus (under msconfig) programs

  nothing seems abnormal in the printer and device section

  When I look at the errors, which seems to be the culprit: "KERNELBASE.dll, version: 6.1.7601.17651.

  Because of this error, I can't (or don't know how) uninstall programs or doing anything in the control panel.

  
  I tried to install ms office 2010 when it started past so now I uninstalled all older versions of office and can not install a new because it says I need to uninstall the old version of Groove (not sure that I have never used it).

  I'm not good at this stuff so pls be kind in your explanations of what I should try.

  Thank you!

  
  Julie

  PS, I have an improved version of Windows 7 and do not know where the drive is.

  Try this:

  1. press CTRL + ALT + DEL
  2. Select the Task Manager
  3. go to: processes > explorer.exe > end process
  4. once go to: Applications > new task > explorer.exe
  See if that helps.

• Skype has stopped working and windows is looking for a solution.

  original title: problem with Skype

  I have been using Skype on my laptop for 12 months with no problems, all of a sudden, I get a message that Skype has stopped working and windows is looking for a solution.  I checked my firewall, windows updates and downloaded Direct X, as suggested by Skype. I've uninstalled Skype and downloaded again to make sure that the version lasted. IHAVE had also my whole system recharged but it did not work. I am at a loss to know what to do next. Someone at - it ideas

  Hello
  
  It is a possibility that a third-party application is causing the conflict with Skype. We can perform the clean boot troubleshooting and check which program is causing the conflict.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Microsoft Flight Simulator has stopped working. Windows is looking for a solution to the problem

  Original title: games

  When I start my X Microsoft Flight Simulator (Deluxe Edition), it is running propely for some time (15 to 20 minutes) that it no longer works and gives me a message "Microsoft Flight Simulator has stopped working. Windows is looking for a solution to the problem"and he have me to close the program. (I have Windows 7)

  Help, please. :)

  I just "uninstalled" pack of the accelerator, and it worked fine.

• Error when you try to use VoIPBuster to place VoIP calls: Client for VoIP calls has stopped working. Windows is checking for a solution to the problem.

  Client to make VoIP calls

  I recently started having problems, make VoIP calls from my computer.  I use VoIP Busters (and using it for a few years without any problems).  Evertime I try to call the destination phone rings a couple of times and then stop.  The next thing that happens is an error message that says: "Client for VoIP calls has stopped working.  Windows is checking for a solution to the problem.  It is followed by another screen that says: "a problem caused blocking the program working properly."  Windows will close the program and inform you is a solution available. "  Nothing happens.  How to overcome this problem.

  I finally had to resort to the re-installation of Windows.  This solves the problem.  But don't forget to back up your computer and email address / addresses before you do.

• Whenever I tried to run the Windows Media Center it says that it has stopped working and he's looking for solutions.

  Hello

  I installed Windows 7 this weekend with the offer of the student. Whenever I tried to run the Windows Media Center it says that it has stopped working and he's looking for solutions. Is it possible that I can download a fix or download the WMC for Windows 7?

  My computer (laptop) is a gateway T-6836 64-bit.

  original title: WIndows 7 media center has stopped working

  I upgraded to Win7 upgrade thestudent and my WMC keeps stopping whenever I try to open it. Is there a way to fix this or if I do a clean install of the operating system?

  This is the error I get:

  Description
  Stopped working
  Path of the Application of vulnerabilities: C:\Windows\ehome\ehshell.exe

  Signature of the problem
  Problem event name: CLR20r3
  Signature of the problem 01: ehshell.exe
  Signature of the problem 02: 6.1.7600.16385
  Signature of the problem 03: 4a5bd053
  Signature of the problem 04: mcstore
  Signature of the problem 05: 6.1.0.0
  Signature of the 06 problem: 4a5bda1e
  Signature problem 07: 1 a 1
  Signature of the 08:146 problem
  Signature of the problem 09: System.InvalidOperationException
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033

  Additional information about the problem
  Bucket ID: 655435415

  When you see failing requests like this, even if you get it to work, you never know what's going to arise later.  I suggest to use the feature of easy to backup transfer all your data and do a clean install.

• Media Encoder has stopped working. Need urgent help.

  I have a project that I'm trying to make. There are a lot of clips of old DV camcorder, I managed to copy mpg2. They play very well, and I can put a few together and make it very well. I put them all together in a final movie of 2 hours. Whenever I try to make it I get the message "Adobe Media Encoder CC 2015 has stopped working" and it closes. There are no model when it arrives, as 15% and sometimes more than 50%.

  I try to restore to the format h.264 with all default settings. This setting works very well with some clips so I don't think it's a problem of encoding/formatting.

  I tried some things that I found on the removal of preferences and cache cleaning and also turn off encoding GPU, and it makes no difference.

  Help, please. What is the problem or what I am doing wrong?

  Sorry, I forgot to answer that. I managed to make it work by pointing a fan of the vents on my computer. Then it must be an overheating problem. I guess I should do an interview

• When you try to uninstall a program, I get the message setup.exe has stopped working, can someone help me with this problem

  I'm trying to uninstall a printer, but only part of it was uninstalled, there are 2 parts more than the necessary printer uninstalled and I get the message setup.exe has stopped working

  Hello

  ·         Faced with this problem specific to uninstalling the application with the printer, or with another application?

  ·         What is the brand and model of the printer?

  You can follow the method below and check if it helps.

  Method 1:

  I would say as you put your computer in a clean boot state and check if it works.

  How to troubleshoot a problem by performing a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.

  Method 2:

  I suggest to install the application printer again and then try to uninstall it, if only the problem is specific to the printer.

  http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

  Hope this helps,

• Error: "Windows Media Center has stopped working. Windows is checking for a solution. "when tried to open it after installing the KB983590 update

  Original title: WMC no longer works after update of August 10

  Windows Media Center has stopped working after installation of my Windows 7 Professional pc all 11 updates gave me on August 11, 2010. I used system restore to the day before the updates, and install them individually. The first 9 no trouble with WMC. But the IE8 KB982664 for Windows 7 compatibility view list caused my action center to report that I needed to check the undeclared solutions to problems. WMC would still start. But after installing KB983590 .NET framework 3.5.1 for Windows 7 x 86, WMC has stopped working.

  After you uninstall update 2 above WMC would still not start.

  After using the system again restore forward updates, I installed the other 9 updated with, so far, no problem with WMC.

  New installation of Windows 7 Pro.

  V.1.0.1963.0 MSE completely up to date. [have not installed the latest beta version due to this problem]

  Former pilot Mig15. Now using Windows 7 Professional and Project Professional 2010 Beta.

  Hi Davy-D,

  Step 1: Perform the upgrade on the spot
  a. close all applications, insert the DVD into the DVD drive of the computer.
  b. in the settings window, click install now.
  c. click go online to get the latest updates for installation (recommended).
  d. type the CD key if you are prompted to do so.
  e. click Yes to accept the Microsoft software license agreement.
  f. on the type of installation do you want? screen, click upgrade.
  g. when the installation is complete, restart your computer and check the difference.

  See Method 2 of this article: http://support.microsoft.com/kb/958044/en-us

  Very Important: Run a repair installation will not damage files and applications that are currently installed on your computer. However we recommend that you back up data, performing the steps incorrectly can delete data.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Liquefy tool stopped working properly need help ASAP!

  OK, so last night, I used the Liquify tool on a selected area of the image and it worked fine. Well, now when I select my domain and try to use it, it just distorts the space and does nothing else. The options and display of fluidity never developed. I think it's just repeating what I did to liquefy the last time that I used it instead of giving me the opportunity to do what I have to do. It just won't let me do SOMETHING with the tool other than warping (what I think is the "repetition" of the previous use effects) everything else in photoshop works very well for me, that's the only problem I have. Prior to this, it would break just when I tried to open to liquefy, but I fixed that by changing the video codecs/plugins to those who work with him so that he is no longer a problem, it doesn't freeze or anything like that. So why is he just repeat what I did last time? Why can I not USE the effect? Help! Laughing out loud

  Are you clicking on the fluidity of everything at the top of the menu filter where the last used filter has a Cmd / Ctrl + F shortcut, or in its usual position below the menu? If the former then hold down the Opt/Alt key when you click the top element (or pressing Cmd / Ctrl + F) to open the dialog filter instead of just re - apply the last used filter.

  

• auto blog software has stopped working. Windows is checking for a solution to the problem not closed Windows program and you contact if a Solution is available. __

  I can't get my autoblogging software to run on Vista. I know it works with vista, because other users have on their machines. The developer also said it works on vista very well.

  For some reason, it does not work on my machine. I installed 2 different versions of the software and both give me error in the title of this thread immediately. He doesn't have the ability to load up and fail or anything he just lift the error immediately.

  for purposes of test and restore my sanity a little I have installed this software on an old laptop running XP and a desktop running xp, after installing the software I opened the first time and on the laptop, I got this same error, however XP let him program continues to work and he opened and held its positions. The Office opened and ran without error.

  So my question is why this software is triggering this error when I open it up on top of my vista machine, and how can I work around this problem or solve the problem, so I can use my software.

  The error indicates that microsoft will let me know when a solution is available, but that never happens.

  Any light you can throw on that would be great.

  Try to run the software in Compatibility Mode: http://www.vistax64.com/tutorials/75909-compatibility-mode.html to see if that helps.

  What is the EXACT error message (Word for Word)?  What version of Vista you are using?  What is the name and version of the software (and the Web site if you have one)?

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Start in safe mode with network and see if the problem is here.  A result allows us to narrow down the search for the cause.

  I hope this helps. Please include answers and results in your response if it does not work.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Dell Support Center has stopped working - HELP!

  I get a message on my screen saying that the Dell's Support Center has stopped working and we're looking for a solution.

  I think something happened to this software, but I'm not knowledgeable enough to be able to make it out for me.

  I tried to center of Dell Support from the Start Menu.  The logo appears but nothing else happens.

  What should I do to get it working again?

  Hello

  I had the same problem. Read everything above,

  Tried all of the suggested fixes, but the problem remains still.

  Just before the end of the installation, I got the same message, that is to say:

  "Error getting cert filename (property: Custom Action Data) of MSI.

  As I find it very useful, I was determined to get it back, so...

  I looked in my PROGRAM directory for any sign of Dell Support Center and therein, a subdirectory for "Dell Support Center.

  There were two points in there, or an uninstall program.

  I just remove the entire subdirectory "Dell Support Center", thinking to allow the installation program again.

  then deleted the downloaded "aulauncher" (installation app for Dell Support Center).

  then restarted the pc.

  Then I followed the link to download Dell Support Center of DELL again, the website downloaded, ran it, REBOOTED and all is now ok with my world. :-)

  I hope this helps.

• Special Roxio Creator 2009 Edition photo editing application has stopped working

  For some time I was not able to use the application (PhotoSuite) in my Roxio Creator 2009 Special Edition of photo editing.  Today, I checked other parts of creator and they seem to open correctly.  But PhotoSuite appears immediately a Windows error window that says it has stopped working and Windows is looking for a solution.  Of course, as always, they never fulfill the promise of advising me of such a solution.

  Fortunately, I have other photo-editing programs on Board that I can come back, but I'd like to have the option to return PhotoSuite.  I read a thread here about a 2012 creator set starts does not, but on mine, it's just the application of PhotoSuite that won't launch.  I checked the versions of the applications within Creator 2009, and the single fence was "PhotoSuite Launcher Plugin", version 4.5.3145.12514.

  Interestingly, when nine the same program was loaded on our old office 2002 XP and everything still starts and runs very well.  I have more global technical problems with the Vista laptop than the old Office XP;  It's just that the Office runs more slowly with loads of high-data of today.

  Of course this 'special edition' Costco is out of ephemeral warranty of Roxio/Sonic, now owned by Corel, I guess, so getting the help from them without doubt will be vain or expensive or both.  Is there a relatively simple fix, or what I need to remove and reinstall the application or all of 2009 since the disc Creator program?

  2008 Dell XPS 1530, Vista, service pack 2, 32-bit.

  Hello

  Restart the PC, when it is up and running turn all programs running out especially antivirus/firewall software... Put the f2010 program installation disc in the DVD drive and when the Installer offers repair, it is executed, when finished restart the PC. It's working now?

  If it still does not, uninstall all traces of the application using Revo Uninstaller in moderated mode.  Make sure that you back up your Windows registry database before running the uninstall program.

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Reinstall using the guide listed here

  Corel has a forum of support and knowledge base.

  http://Corel.force.com/Roxio/rSelectProduct?lang=en_US