WNR3500L model after a power cut my modem and router stopped working.

Similar Questions

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• USB mouse and keyboard stop working after I have install Windows Update KB2913431

  After installation automatic Windows Update KB2913431 (Win 7 Enterprise), the computer seems to work very well, but my mouse and keyboard stop working.  The option of automatic repair after that start with F8 does not work.  He said that the error is "unspecified".

  The fool is that it has created a constellation of intermittent problems when I try other options to get these devices to function after the update.  The questions I will of unpowered USB ports, grateful Windows and install the drivers for USB devices, but then do not recognize their (and are not), random BSOD, restore points invalid system, random boot failure, which causes discs to randomly stop working properly, closed randomly , à... I think you get the idea.

  I think it must be a driver problem.  I passed through the Device Manager and uninstall all hidden devices.  I have updated the drivers for everything that has an update available.  I tried to disable all, but Microsoft services at startup and in the list of "services".  I've always been unsuccessful; However, when I can get it to successfully restore to a point before the update (none of the automatic restore points work correctly) it seems ok.  It will sometimes seem to work after I applied the update, but then go haywire shortly after.  I am convinced that it is not a hardware problem, given that the prior update restores (when they actually cross without failure) work very well.

  I went through countless articles in the knowledge base and tried all the suggestions I've seen, other than registry cleaners because I had a bad experience with this earlier.  I tried so many things that I lost count and the memory of some of them.

  I reached point is never install the update (an option that I prefer not to use) or creating a clean Windows install on another drive (an option that I prefer not to use, but I'm a little more friendly to).  I already started to back up files to prepare a clean install, but I reach out one last time before I pull the trigger.

  Thanks in advance for your suggestions you have!

  Edit: I thought I could include other system information.

  Motherboard: Gigabyte P67A-UMD
  -Drivers for integrated components:
  Related articles - USB:
  -Renesas Electronics 3.0 USB root hub
  -Renesas Electronics USB Host controller 3.0
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1 26
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1C2D
  USB root hub-
  -Generic USB Hub
  -Network:
  -Realtek PCIe GBE Family Controller
  Graphics card: NVidia GeForce 460 GTX (driver c. 332.21)
  Sound: NVidia High Definition Audio 4 x, Realtek High Definiton Audio x 1
  There may be a conflict here: the address of the Realtek driver is 00000201, which is the same address as * a Nvidia drivers.* *.
  Mouse: Logitech (MX518) G3 mouse optical - wired
  Keyboard: Keyboard wired simple Generic USB Dell
  All other USB devices are currently disconnected

  Thanks, but I tried to fix myself on a personal level - my IT Department is not hot.

  In any case, the problem was resolved after much googling - I took possession and renamed a bunch usb*.sys file in the Windows\System32\drivers folder, uninstalled items usb from Device Manager and did a scan for the hardware changes.
  This solves the problem.

• I have an old iMac (about 10 years) and after a power cut the screen remains black after start-up

  IMac was on but in the sleep when had power cut. After feeding back immediately tried to start over, but I just black screen that could hear the startup chime, and hear the work of the machine. In collaboration with el captain. I have mouse and wireless keyboard. Any ideas?

  Reset the management system (SCM) controller on your Mac - Apple Support

• After a power cut my PC is in a loop in the start windows normally, safe mode, last known good configuration screen

  After a power failure when I start my PC, it gets to the screen... "We apologize for the inconvenience, but windows did not start successfully... When I try to reboot in one of the 5 modes to start normally, safe mode, safe mode with command prompt SafeMode with network, last known Noah correct configuration of their work and the loops of the computer to this sreen repeatedly.

  KB307545 is a very bad idea to begin with - especially after a power failure (and it's usually just a very bad idea).  You don't describe symptoms suggestive of a need to run the KB307545, but, I'm not a Microsoft Support engineer so don't hesitate if you are forced to do, and I wish you good luck.

  What you need to do, is start in the XP Recovery Console and run chkdsk/r first.  Is is possible that the blackout damaged your NTFS file system and a chkdsk/r is to clean it.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  See what the BSOD said would be interesting, but I would still recommend that you run chkdsk /r from the XP Recovery Console to make sure your file system is not damaged.

  Answer the questions and we can see what to do next.

• After a power cut, I have to sign up with a password to access my internet connection.

  original title: now broadband CONNECTION MANUAL

  my connection broadband used to be automatic.

  After a power failure, it will automatically connect local.

  I have to manually sign with broadband connection password.

  IE7, VISTA, Verizon should be information you need.

  my Skype and Skype recorder fail because the connection is broadband

  is no longer automatic.

  Hello

  The Id and the password are usually enterd in the Mode/router and maintains the connection to the life there.

  Check the configuration of the router/Modem WAN and redo it ID and password (see the manual of the router/Modem for how-to).

  If you can not understand call Verizon support they guide you through the process.

• modem and router work on other computers, but a computer shows no internet access and no IPv6 IPv4 ort connectvitity

  I have access to the modem router / wireless on laptop, IPAD and a PC computer.  However my Windows 7 PC, depicts all of a sudden strong router connection with small exclamation point under power router and NO internet connection. The

  Wierless network login screen says I have no. IPv4 or IPv6 connectivity. I tried to reset winsock and IP nothing helps. Can't do on the internet, when well even the modem and the router are OK

  I have access to the modem router / wireless on laptop, IPAD and a PC computer.  However my Windows 7 PC, depicts all of a sudden strong router connection with small exclamation point under power router and NO internet connection. The

  Wierless network login screen says I have no. IPv4 or IPv6 connectivity. I tried to reset winsock and IP nothing helps. Can't do on the internet, when well even the modem and the router are OK

  Try this:

  1. Open network connections by clicking the start , and then clicking Control Panel. In the search box, type adapter and then, under center network and sharing, click view network connections.

  2. Right click on the connection that you want to change, and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click the network tab. Under this connection uses the following items, click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click Properties.

  Double check and make sure obtain DNS / IP are both checked on automatic.

• ORBI replace DSL Modem and router Nighthawk?

  I have a Nighthawk AC1900 R7000 router and a Netgear DM111PSPv2 Modem and I was wondering if the system ORBI would replace both of them and give me greater coverage. Anyone?

  Thanks for the reply. Think I'll stick to what I have.

• WinRE disabled after resizing partition recovery of Lenovo and OneKey Re works

  System: Lenovo Yoga 700-14ISK 80QD

  The almost 4 GB of free space on the partition of Lenovo have been very tempting, after researching if it is safe and also, I decided to give it a go by using a 3rd party free software has saved me several times in the past (MiniTool Partition Wizard). Interesting that most tutorials on create a recovery drive and the removal of the partition, but I decided for now to get just the free space until it takes more, and I did not find that resizing with 3rd party software will mess up your WinRe settings only once this has been done. Here's the info of the agent:

  /Info C:\Windows\System32>REAgentC
  
  Recovery environment Windows (WINRE) and system reset
  
  Information:
  
  Status of Windows RE:         disabled
  
      WINRE location:
  
      Identifier of the Configuration Data (BCD) of startup: 47251840-c09c-11e5-af06-00808a8e1ce5
  
      Location of recovery image:
  
      Image Recovery index:      0
  
      Location of the custom image:
  
      The index of the custom image:        0
  REAGENTC. EXE: Successful Operation.

  After resizing and the recovery agent control, I realized that I lost details such as the location of the partition, offset and id. After changing the System32/recovery with outreach and id ReAgent.Xml it was not enough to allow that the path for the location of winre etc miss me him.

  This is what my file looks like now:

  Can someone help me and give me the necessary adjustments?

  My laptop works fine and OneKey recovery works well, except that I cannot create a recovery drive more. Thank you.

  After watching my partitions and shifts again, I modified the agent accordingly re and now I am able to create a recovery drive.

  Solution:

  1. Mode of high open CMD
  2. type diskpart
  3. partition of type list
  4. use select partition = x where x is the number of the partition that you are interested to see the details
  5. partition detail to see GUID, offset and other type information
  6. Type exit
  7. Change Windows/System32/Recovery/ReAgent.xml
     • Change path, offset, and guid for tag WinreLocation
     • That's why your score are hidden to make sure that the path looks like this:
       • \\?\GLOBALROOT\device\harddiskY\partitionX\Recovery\WindowsRE
       • Where is the number of hard disk - usually so unique 0
       • Where X is the partition for WinRE number determined in step 4
     • Apply the same logic to PBRImageLocation tag to partition LENOVO_PART
  8. In CMD type reagentc /info and now you should be able to see your location
  9. If step 8 failed try reagentc first enable and repeat step 8
  10. I don't know if it is relevant or not, but a computer restart might help and repeat steps 8, 9

• Reset the modem and router

  I have reset my modem and the router and now my wireless connection log. No error messages either.

  If you reset your router access point / wireless to factory default you have wiped out any customization that has been created for your (home) network? Two that immediately come to mind would be static by CMA IP address assignment and parameters of encryption without wire/password.

  You must get a CAT5/6 cable and connect a direct connection to your router to go, and then make the changes that can accommodate a wireless connection that suits your situation. By default, most routers will not allow change settings via a wireless connection.

• W7 Hp i7 Pavilion Radion after day of release card tonight on laptop stopped working

  W7 Hp i7 Pavilion Radion after day of release card tonight on laptop computer stops working. After a restoration of the system, 'exit to monitor' has worked well.  How can I update on what is happening? Should I turn on automatic updates?

  Hi Curtis,.

  Microsoft updates which was installed recently?

  First of all, I suggest you to change, the automatic installation of updates settings to manually. Once you change the settings manually then find updates and install updates one after another to find out what update is causing the problem. Once you know the update caused the problem, download and install this update in skinny boot from the Download Center.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode

  See also the links: Activate the update or disable automatic
  http://Windows.Microsoft.com/en-in/Windows7/turn-automatic-updating-on-or-off

  Install Windows updates in Windows 7
  http://Windows.Microsoft.com/en-in/Windows7/install-Windows-updates

• XP freezes at startup then begins after the power is turned off and on again

  After a windows session and wait that my computer close, I usually turn the power off to the outlet.

  Upon restarting, the computer hangs on startup controls and can be recovered in closing with its power button press again to restart.

  The ideas people?

  I guess that if you leave your computer plugged into the wall - IE do not activate deactivate the plug - you do not have these problems?  If you turn off your computer by unplugging from the wall, the computer comes back on the motherboard battery to retain the BIOS settings (and keep the time as well).  These symptoms may be a sign of a low battery or motherboard failure. On the first power cycle, it attempts to recover the BIOS settings, and the second power up then maybe succeed.

  Check your motherboard battery.

  HTH,
  JW

• NECESSARY emergency ASSISTANCE - I had a power cut this morning and when restarted my IMAC and I opened my project in Premiere Pro all content is missing how I get it back?

  I need to retrieve my project in first Pro CC I can't. can someone help me as soon as possible.

  Hi, first thing to try is to check whether the project file backup is automatically available.  If you haven't changed the drive working settings when creating the project, then automatically saves these last will be in a folder bearing mention Auto records next door where you have created/saved file .prproj work.

  Try to open one of them to see if all your clips, sequences, and your changes are present.  You may have to back up a bit and redo some work but better than losing.  Normally they record every 15 minutes up to 20 copies of the project of maintenance (unchanged).

  Don't forget to check your AutoSave preferences in future Macs: PremierePro > preferences > Autosave PC: Edit > Preferences > backup automatically.   Make sure backups Save to creative cloud as more redundancy - this requires that you change to a workstation connected to the internet.

  Good luck

• Problems with new cable modem and router

  Long story short, that my cable modem went bad.  I replaced it.  Now the two computers cannot connect to the internet.  It gives me a DNS error, saying that they can not find the server.  However, I can get on the internet if I hang the right modem to computer with courses through the router. I got it with the new modem a few days of work and use of the router, but now it does not work.

  There are 2 computers on the network, the two runnning vista.
  a linksys router model number BEFW11S4 ver 4.
  and the motorola surfboard SB5101 modem.  the old modem was a surfboard SB5100 motorcycle.

  There's a btn reset on the router (often the metal clip through a pin hole)
  Everything also its possible allways the router is bad

• Satellite U940 - after the update of Win8.1 FN key stop working

  I have ultrabook Toshiba U940-b484, after I updated my system windows 8.1 all FN keys does not work and after more try only up/down switch soung and brightness keys is just the word, and keyboard light switch is not working too, all solutions?

  Concerning

  I by Satellite U940-103 and I did Win8.1 with success. Everything works perfectly.
  My only solution is: Win8.1 update must be performed according to the instructions of update Toshiba Win8.1 instructions for installation and http://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/ document which can be downloaded on Toshiba support and download page.

  Have you installed all the specific tools available Toshiba and utilities?