Woke up to no link etherent, moved to WIFI that works but not ethernet taken RJ45 listed in used

Similar Questions

• How to solve ' error Code: 403.14 "try to open a link in a Web site that works on other computers and worked on my computer til now.?" "

  The site is www.Jardencs.com/careers. When I click on "Career opportunities", I get the following error message:

  Query error
  Prohibited directory
  Registration denied
  Close the browser and try to connect again.
  Error code: 403.14.

  The link worked on my computer up until now and now working on my cell phone. I recently installed the torch, but uninstalled it today when I started having this problem.

  When I click on the link, I get sailed on a different site, https://erecruit.jarden.com/erecruit/jarden.html. This is done via a script rather than a simple link.

• DN1030. Wired WiFi works but not wireless, even after moving the unit next to the modem

  I have great wifi range and cable modem speed.

  My wife saw a video from You Tube Streaming PARTY so I bought a DN1030 to replace an old music receiver and a Blu - Ray BDP - BX510 a player couple so she can listen to the same music through the TV speakers.

  The readers Blu - Ray picked up wireless in 1 minute.

  The DN1030 think for a few minutes and tells me that the connection fails.

  I have temporarily moved the DN1030 next to my modem (it was only 15 feet away) and there was no change.

  I even reset the receiver and tried to update his software (it does not need).

  I temporarily connected it with a Ethernet cable and it works.    Tested with airtime and the PART.    Great flexibility.

  I can't move the modem or connect a cable to the DN1030, so I really need a wireless receiver.  What do you recommend?

  A different model?

  It is highly recommended that you plug your STRDN1030 has / V Receiver to a router or a modem/router and not just a standalone modem because stand-alone modems assign IP addresses to internet equipment as your Sony receiver.

  You can contact your internet provider to get a separate router or upgrade your modem existing to a modem/router device.

  If my post answered your question, please mark it as "accept as a Solution.

• a Web site is moved to google for me and for others, other sites, safari works, but not firefox

  This also happens to other users of this Web site.
  This has happened with ff 15 which kept freezing up and with ff 16 Beta that does not freeze.
  I rebooted everything without success.
  Webmaster said other similar complaints

  You are welcome

• My camera on the bridge that worked, but since I moved it gives me an error message when I try to take the file from the captain not found

  I used to be able to use the camera on my web cam, but now it does not work...

  Don't know why...

  He tells me that the file does not exist... Don't take the pic is also my microphone does not work either

  Hello

  1. What is the brand and model of the computer number?

  2 did you change on your computer?

  I suggest you to update the drivers for the webcam and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest you to perform the system restore and check.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• Space forum reports moved to development tools, but not displayed in the list area

  It's a good idea to move the area report in the category of development tools, but it is not among the list of namespaces

  Development tools

  You must choose the sub-areas to see

  Development tools

  Shoudn't I see it at the same level as the forms?

  Concerning

  Marcus

  Thanks for the heads up! I added registration space.

• Help! "Create links to other articles" doesn't work is not on the final application

  Hello everyone,

  I made an app for an independent group of the Spain, which is a very nice format for musicians (you know, like the booklet with lyrics), but now, when I have the Developer Edition App on my iPad, something is wrong.

  I have a clue about this app, and in it, I have a menu to go to the article titled "Remixes" within this article, I have several pages (one for each remix/artist). I use the command navto: / /... Everything goes well in the DPS, but not on the final application (developer). On the App, for example, the navto://remixes#2 command does not work! Then when I am clicking on the menu, I'm on the first page of the article still! It's a big problem because this app is designed that way

  Furthermore, I work under the 27 Viewer Version.
  

  Could someone help me with this?

  Thank you very much!
  

  Known issue. You will have to wait for a fix which I hope will come

  This week.

• Image links (JPEG format) which show on Mac but not PC?

  Well, I'm curious!

  Help out me here if you can...

  I'm updating the images on a site of the company using a Mac.

  After update, all the tests on my end show the image as it should.

  I have a test on Mac co-worker here and it is on their computer.

  But, when another co-worker on a PC check to see the same page...

  The image is NOT visible just the box with the X and image tags.

  The inserted picture is a jpeg without spaces in the title should work...

  
  

  Any ideas out there as to why an image (jpeg) shows on Mac not PC?

  Thank you

  Star *.

  Only two possibilities: I can think of:

  (1) a problem of image path - img src = points to the wrong folder or directory on the server.

  (2) a type of image not supported.  Most of the browsers cannot render CMYK images.  When you have saved the image, save you for web as a progressive jpg in RGB mode?

  If none of the above, post a URL to the page so we can see it, please.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics |  Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB

• How do a link led between two forms that independently of moving

  Hi all

  I am looking for many tutorials how to create something like this:

  http://turbulence.org/works/MyPocket/graph/

  (the video is on the right)

  But could not.

  I have for each shape, I do 2 circles (move separately) and between them, making a shape that works as a link, related on each circle on the sides... is it clear? I need the link to 'stretch' and follow the two circles...

  Do you know if there is a way?

  Thanks in advance

  m.

  Use something like this technique from an old blog post, I did years ago:

  I created a layer named string and a layer called Kite. I drew a mask on the layer of string that forms a gentle arc, added the effect of outline with a width of 3 pixels and paint on Transparent selected. The race goes from the left edge to the right edge of the layer in the chain, and it is important. The string layer is slightly narrower than the model to make it easy to work with. The last step with the layer of string is to move the anchor point to the left most vertice point of the mask at exactly a value X 0. It is also important. The two layers are converted to 3D.

  The Kite layer is simply a square solid with a mask in the shape of the kite and the anchor point where is used the string.

  The following terms are added to the string layer:
  String scale:

  point1 = position;
point2 = thisComp.layer("Kite").position;
L = length(point1, point2);
w = thisLayer.width;
r = L/w*100;

  [r, value[1], value [2]]

  String Orientation:

  t = thisComp.layer("Kite");
l = thisComp.layer("String");

  fromPoint = l.position
atPoint = t.position
lookAt(fromPoint, atPoint)

  If you look closely the language, you'll see that I'm calculating the distance between the anchor and then dividing the difference in the width of the layer and multiplying that number by 100 to arrive at a scale factor to make the string layer is always the same length as the distance between the end of the chain and the kite. The part of the Orientation of the expression simply indicates the string to the wing. There is a problem which must be overome. The string layer is perpendicular to the wing and this part is important, the rotation must be changed to-90 to get things to normal. This isn't another expression, it's just a value that you put in.

  The kite layer also needs an expression to point the wing at the end of the string. The expression of the orientation of the kite is basically the same as the string Orientation expression with definitions for the to and the reverse point. It looks like this:
  Kite Orientation:

  t = thisComp.layer("String");
l = thisComp.layer("String");

  fromPoint = t.toWorld(position);
atPoint = l.toWorld(thisComp.layer("String").anchorPoint);
lookAt(fromPoint, atPoint)

  Now the kite can be moved and the string will follow.

  Here's the project file

  Here is a movie.

• When I click on a link in Twitter, Facebook, other, page opens but then goes to Yahoo search. How do I kill who?

  I have Google as my default search engine. When I'm in a number of sites and click on a link to open it, the page opens, but only momentarily, and before moving to the browser of Yahoo search for this topic. I would like to prevent that from happening, but don't know how. I'm on a Mac Book Pro OS 10.9.5. This was not the case before the switch to Yahoo as search engine default Firefox.

  Thank you

  Email address removed by the moderator. If please do not publish sensitive information and follow the guidelines and rules of the Forum

  Favorite and use this.
  Download the Mozilla search reset {web link}
  This module is very simple: when installing, it backs up
  and then resets your search and home page preferences
  at their default values and then to uninstall. This
  affects the search bar, search bar URL, and the home page.

  https://support.Mozilla.org/en-us/KB/how-to-fix-preferences-wont-save

• How do you LOCK your desktop in place icons so that they DO NOT moving whenever I RESTART or POWER-UP?

  How can I LOCK you your desktop in place icons so that they DO NOT moving whenever I REBOOT or POWERUP?

  I found some links that might help you.

  "How to change the alignment view desktop icons, and sort them by order in Vista"

  http://www.Vistax64.com/tutorials/126728-desktop-icons-view-sort.html

  http://www.howtogeek.com/HOWTO/Windows-Vista/save-and-restore-desktop-icon-layout-in-Windows-Vista/

• I moved a drive and it says my activation key has already been used is anyway I can get it back to keep it active

  I moved a drive and it says my activation key has already been used is anyway I can get it back to keep it active

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question.

  This problem occurs because you changed the hard drive. When a change is made in the hard disk of the windows vista system will ask you to activate.

  To activate Windows Vista by using the automated telephone system, follow these steps:

  a. Click Start, and then click computer.
  b. click System Properties on the toolbar and then click here to activate Windows now in the Windows activation section.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. click Show me other ways to activate.
  d. click on use the automated telephone and then follow the instructions.

  You can also navigate to the link below and try to follow the steps to reactivate the copy of Vista.
  http://support.Microsoft.com/kb/950756

  Reference link:
  What is activation?
  http://Windows.Microsoft.com/en-in/Windows-Vista/what-is-activation

  Activate Windows on this computer
  http://Windows.Microsoft.com/en-in/Windows-Vista/activate-Windows-on-this-computer

  Please respond with the information. I'd be happy to help you further.

• Links in my gmail does not work, but they work with the chrome browser.

  All of a sudden a few days before, the links in my gmail wouldn't work - a new tab comes with gibberish-gook, but I am not taken to any site. When I read my mail using the Chrome browser I have no problem. But I prefer to use Firefox. When I click in links in, for example, there is no problem... news just in my gmail.

  I tried a search, but it seems similar problems my specific problem.

  I use Windows 7 and Firefox 43.0.1.

  I would appreciate any advice.

  I'm glad to hear that your problem has been resolved.

  Please contact the Mozilla Support.

• My site has links to Amazon Books. They show up in my IE browser but not if I use FF. Is there a solution?

  The content on the page, but the real connections remain empty. Here is an example of a link...

  < iframe src = "http://rcm-na.amazon-adsystem.com/e/cm?lt1=_blank & bc1 = 000000 & IS2 = 1 & bg1 = FFFFFF & fc1 = 000000 & lc1 = 0000FF & t = dancewithmarm-20 & o = 1 & p = 8 & l = as1 & m = amazon & f = ifr & md = 10FE9736YVPPT7A0FBG2 & asins = 0897329732"style ="width:120px; height:240px;" scrolling = "no" marginwidth = "0" marginheight ="0" frameborder = "0" > < /iframe >

  It seems that the page will not display correctly to all visitors using FF as a browser.

  Could it be because you use Adblock and URLS clearly indicate an ad server? Maybe you can find another way to link.

  Also, if your site uses the HTTPS protocol, an iframe with a src HTTP would be blocked, and a shield icon at the left end of the address bar.

• where is there a link that works to an older version of firefox for windows

  I SPENT THE WEEK LAST, TRYING TO FIX THE NEW PIECE OF CRAP INSTALLED ON MY COMPUTER WITHOUT MY PERMISSION. I DELETED THE OLD VERSION, NOW I WANT AN OLD, BUT GUESS WHAT FIREFOX HAS CONVENIENTLY LEFT LINKS THAT DO NOT WORK THEY DO NOTHING

  HOW DO I FIND A LINK THAT WORKS SO I CAN GET BACK TO MY FAVORITES

  FIREFOX SUCK YOU

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/