Won't COMPLETE event triggers of level FEIELD, even if the user clicks ABOUT on the field in question?

Similar Questions

• How to manage touch event in the field

  Hello

  I created field checkbox custom, when am touch event for her manipulation, emphasis is gettting inside, and when I try to click on any other components such as the box native, afer by unchecking the custom check box, the custom box is clicking again.

  How to handle this?

  Thank you

  Rakesh Shankar

  There are certain basics that one needs to understand to effectively manage key events:

  (1) touch events are sent to the field currently has focus and the enveloping managers, including the active screen.

  (2) default response of the system to the event down is to divert attention to the field to the position of touch If there is a focusable it. If there is no focusable point touch field, the field currently has focus is unchanged. There's no "unfocus everything ' method in BlackBerry (there might be, but it is not readily available - there is a protected method focusRemove, but it is supposed to be used in conjunction with a later focusAdd protected in cases where the field has changed its focus rectangle - a classic example is any input field or text such as EditField or RichTextField view)

  (3) the default action of TouchEvent.CLICK is to call trackwheelClick (which, by default, invokes navigationClick) which is a great way to ensure consistency between the 'clicks' and clicks touchpad screen. The same is true for unclicks finally managed by navigationUnclick.

  If you want to disable the click by default if the key is outside all focusable fields and will not disrupt the rest of the system, just return true if the event is to CLICK, but the contact details are outside the scopeand actions super.touchEvent otherwise. And keep your return true; on all UNCLICK events: it's a good idea if you don't want to see the context menu from appearing each time or field click reaction called twice.

  The example of Peter was written when I've heard most of it already, but now I realize that you can do a lot easier. See part highlighted the previos section.

  Good luck!

• events triggering not on value change

  Is there a problem to have several event facilities in a VI that handle the same event? Specifically, I have a stacked sequence where in an image, there is an event loop (structure of the event in awhile put in loop) which manages the user interface buttons and closes the loop when met the correct conditions and then moves in another frame with another loop of events that handles the key events even in a manner slightly different and also some data acquisition view and generate files.

  I have attached a simplified version of VI that illustrates the problem. If the second event (in box 3) loop is activated, the RUN button are not managed in the first loop of the event. If the second loop of the event is disabled the button RUN are managed in the first loop of the event.

  This is something that can not simply to be chart labview? I'm more used to do this kind of programming in C or VB where the handler determines its behavior based on some global state variables and maybe I don't see how to achieve this easily in labview.

  I wouldn't the things sentence too strongly, as Dennis has, his points have merit.

  Your problem is with a parameter set to the value change event in the second structure (a checkbox in the dialog box), which tells the LV to lock the front until the end of the case of the event. Given that the occurrence is not complete (it doesn't even start), the FP remains locked and you can't do anything. The key here is understanding that registration for the event occurs as soon as the structure of the event between the VI is execution mode (simplification, here we just say the VI began to run) and from that point on the recorded events are queued, but you let run never really the structure of the event.

  The band-aid patch might be to uncheck the box for this option, but this isn't a good solution. A better solution would be to review your code in such a way that you don't have the event structures in order. There are many options for how you can do it. Here is one that is quite detailed - http://www.notatamelion.com/2015/02/23/building-a-proper-labview-state-machine-design-pattern-pt-1/

  In this one, you basically have a structure of the unique event and you react to events according to the State of the system.

• VMware Performance event triggers use case issues.

  1) can event Performance adapter CPO VMware triggers and their

  Attributes of the SAMPLE SIZE, INTERVAL and CONDITIONS be configured

  for the following use cases?

  (2) event VMWare Performance triggers may be CORRELATED?  and if so it would take to satisfy the use case?

  (3) an additional performance monitoring tool needed to satisy the use case? :

  If a VM CPU or RAM was 80% for 2 hours then trigger a workflow

  and

  If a VM CPU or RAM was 60% for X days and then trigger a workflow

  First, I will describe how you can instrument a correlation method, but in the end, I'm not sure it's really necessary for use cases described.

  To correlate the performance VMware on a designated period events, you would create a process correlation that follows the underlying the performance event and decides to trigger the process wished triggered when correlated event is detected or not.

  Here's how it works.

  First, create a global table with three columns:

  (1) virtual path Machine

  (2) County of consecutive trigger

  (3) latest trip time

  Create a process that is triggered by a performance event VMware (for example memory Avg > 80%) where you can set the size of the sample and an interval that is logical view of the period of interest (2 hours or X days). For example, a sample of 10 and 30 seconds (5 minutes) are a slice of reasonable time to vCenter for 2 hours. As a result, requiring 24 consecutive triggers to trigger the real event of interest. (divided by 5 minutes to 2 hours)

  In other words, the formula is:

  Sample size * interval / calendar = consecutive trigger Count

  The correlation process triggered by the gross VMware event does the following:

  (1) if there is no existing entry in the overall table for the virtual machine, add the entry to table with count = 1 and current time

  (2) if the entry exists, check the current time against the last trigger time

  (a) if it is the next interval, for example, the time now is 12:15 and triggered last time was 12:10 (see note below).

  Incrementing counter and trip together last time

  If count = 24, then run the process that manages the "VM memory Avg > 80% for at least 2 hours' and remove the entry from the table.

  If count< 24,="" the="" process="" exits="" having="" only="" incremented="" the="" counter="" and="" set="" the="" last="" trigger="">

  (b) if the current time is > that last trigger time slice schedule (+ a little padding), set the counter to 1

  Note: When comparing the time of w/last time running, you should cover to consider delay light treatment in order to compare now< last-time+(time="" slice*2).="" anything="" less="" than="" 10="" minutes="" in="" this="" case="" would="" be="" considered="" a="" consecutive="" trigger.="" you="" could="" also="" compare="" current-time="">< last-time+time-slice+1,="" which="" is="" probably="" also="">

  Now, after going through all that, you don't have to the process of correlation after all. Simply adjust your sample size to be large enough to accommodate your deadline and you launch your handler directly without having to correlate. So for the 2 hour window, simply create a sample size 240 (* 30 seconds = 2 hours). This may or may not work depending on how performance indicators have been set up on the server (sample size, intervals and how much is saved). You can define your own samples and multiples of these configured values intervals (so be careful and see VMware documentation when he resorts to such measures)

  You can see that I have described everything first correlation method is more reliable, especially for longer periods such as X days (where you need to taste every hour instead of every 5 minutes).

  In any case, I think you can do what's needed without external control, but will require experimentation and a deeper knowledge of the works of performance for ESX metric sampling.

• Only in a. won a Citizen receipt printer and I need to change the preference to print, I get a 'operations can not be a complete mistake.

  Only in a. won a Citizen receipt printer and I need to change the printing preferences I get a "operations may not be a complete mistake", I'm working on the administator. I am able to access printing preferences for all other printers that are on the computer.  This creates a problem that prevents the reception of a printing web-based program.

  I'm using a new hard drive with Windows 7 above.

  How do you re - define preferences depends on options software printers, and if this printer is fully supported under win7 - that is to say that the printer manufacturer provides some win7 drivers/software

• mouseEnter/mouseExit event triggers a screen jump ONLY when zoomed in?

  Hi all:

  First of all, to all the people who post answers repeatedly: you really are rock stars in my book.  Learned so much from you all; Thank you deeper, deeper.

  I can't find anything online re: this issue and BELIEVE me I looked, so I'll make a post with a detailed example.   If I do a pretty good post, maybe this helps someone else down the line.

  The use of LiveCycle name to create a dynamic PDF.

  Conditions

  When:

  (1) a field has focus; (and)

  (2) the user zooms IN on the form; (and)

  (3) the user decides to scroll away from the field with a focus (so the field with emphasis is no longer visible on the screen, but still technically has the focus)

  The question:

  If the cursor happens to pass over an object with a mouseEnter and mouseExit code, Acrobat will skip the view the field with the development.

  Concrete example:

  (1) the end user opens a PDF file and zoomed in a bit for easier reading.

  (2) user sets focus on a field at the top of the page to answer this question.

  (3) end user decides to scroll down and see what other types of questions they have to answer, again leaving the emphasis in the area of the top of the page;

  (4) if the screen scrolling the cursor on an object with javascript in the event mouseEnter and mouseExit, Acrobat resets back to the top of the page view then

  the field with the emphasis is again visible.

  Note: even if the screen scrolling does not pass the cursor over an object with the event mouseEnter and mouseExit text, if the end user then moves the cursor on a

  object with code in the event mouseEnter and mouseExit, Acrobat resets the display for the field in putting emphasis is visible again.

  Additional comments

  (1) object type does not appear to matter.  I tested it on the types of additional fields in the joint and the jump seems to be triggered when the code existing in the mouseEnter and mouseExit the

  event and field focusing is NOT visible on the screen.

  (2) it doesn't seem to be a "top" or "bottom" of the page number.  Page 2 fastener reverses available to 'up-down' to the 'bottom-up' and the jump is still happening.

  (3) it seems to be a matter of dynamic form that I made a backup to static PDF and the break does NOT occur.

  4) arrives on PC and Mac.

  The joint is highly noticed and contains several buttons showing the various conditions and what does or does not trigger the jump.

  Thoughts?  I'm totally stumped.  A form property that tries to help?

  Thanks in advance,

  BR

  (Could not attach a PDF file for some reason any.)  Here is a link to dropbox.  Dropbox - Public

  You need to reset the current home to get rid of the development of jumping.

  Add this additional function to your form.

  function resetFocus (obj) {
    var focussed = xfa.host.getFocus();
    if (focussed !== null) {
    if (focussed.somExpression !== obj.somExpression) {
    xfa.host.setFocus(null);
    }
    }
  }
  

  Call this function from the function buttonOnEnter()

  function buttonOnEnter(btn){
    resetFocus (btn);
    btn.border.fill.color.value = vColorMouseEnter.value;
    }
  

• Dynamic action - number of events triggers

  See http://screencast.com/t/XrGTYvKFT
  
  The DA is a search server side based on the content of a form input field when the field gets focus.
  
  Is it possible to trigger the DA on either a KeyRelease event or get a tune-up? It would cover both use cases, initial entry and reviewing data that already exists.
  
  Ideas? Thank you
  
  [Of course, I could just duplicate the DA and set one of them to shoot the KeyRelease and the other on GotFocus, but this is not < a href = "http://en.wikipedia.org/wiki/Don%27t_repeat_yourself" > < /a > SEC]

  Vikas,
  It would have been much easier if the events themselves might have been entered in definition (wizard) D.A., so that several events as well a custom events trigger a D.A.

  As for your question, a (convoluted) way is to use an intermediate element of the set.

  Want to trigger a D.A. on 'KeyRelease' and 'Get the Focus'.

  Add a hidden element somewhere on the page (element text pre/post, headers region, region html etc...)

  < span id = "my_elem" > & template; </span >

  You can then set the D.A. triggered by a click (double click or any event that D.A. support natively) on this element.

  Then you link the original events on any element to trigger the event of the item to the D.A. (and therefore the D.A.)
  You can add an onload J.S / an another D.A. for that.
  The code reads

  $('selector').bind('event-names',function(){
    $('#my_elem').trigger('eventname');
  });
  

  for example

  $('P1_ITEM1').bind('keyup,focus',function(){
    $('#my_elem').trigger('click');
  });
  

• Audio-&gt; "complete" event vs SoundChannel-&gt; 'soundComplete' event

  Hello

  Here can someone explain the difference practice between:

  event full of sound class event and soundComplete of class SoundChannel ?

  What are the exact differences between the two? When exactly the two events are dispatched? They are still together or not - which is the first?

  The documentation is very terse in this case (as usual for most...).

  Thanks in advance!

  Sound class

  This is not a complete event (in the way one might think). What you might be referring to (in the Docs of the ACE) is using the flash.events.Event.COMPLETE event. This is only used for loading the audio files and tells you when the data has been loaded successfully. Thus, as a general rule, you just use the Sound class to manage the loading of things...

  SoundChannel class: flash.events.Event.SOUND_COMPLETE

  This is what should be used to detect the completion of the audio. The SoundChannel class is what you want to use to control the stop/pause/play of things.

  private var _s:Sound;

  private var _sc:SoundChannel;

  Loading audio...

  _s = new Sound();

  _sc = new SoundChannel();

  _s.addEventListener (IOErrorEvent.IO_ERROR, errorHandler);

  _s.load (new URLRequest (url));

  During audio playback...

  _sc = _s.play ();

  _sc.addEventListener (Event.SOUND_COMPLETE, soundCompleteHandler);

• FileReferenceList does not return a complete event

  Hello people of Forum!
  
  I have an application that downloads the files. A moment with FileReference file download works. No problems. But when I try to use FileReferenceList, objects in the FileReferenceList FileReference table do not return an Event.COMPLETE, when they finished. Both versions violate the same servlet, so I start from the principle that there should not be no problem on the receiving end. When I throw in debugging code, I see the return of open FileReferenceList object and progress events, but never a full event. Here is what my code does:
  
  The user clicks on the 'Browse' button and selects the files. When they're done, the button is clicked "Upload" and they clicked. I make a few calls to a database to retrieve identifiers of document and then I go through the download process:
  
  var fileReference:FileReference = FileReference (this.uploadFileArray.pop ());
  fileReference.addEventListener (Event.OPEN, traceEvent);
  fileReference.addEventListener (Event.COMPLETE, completeEvent);
  fileReference.addEventListener (IOErrorEvent.IO_ERROR, traceEvent);
  fileReference.addEventListener (ProgressEvent.PROGRESS, progressEvent);
  fileReference.addEventListener (SecurityErrorEvent.SECURITY_ERROR, traceEvent);
  var req:URLRequest = new URLRequest (endpoint + paramString);
  Req.Method = URLRequestMethod.POST;
  fileReference.upload (req, "whatever", false);
  progressBar.label = "Loading"... » ;
  btnCancelFile.enabled = true;
  
  Here is my 'complete' event handler:
  
  private void completeEvent(event:Event):void {}
  mx.controls.Alert.show ("completed event.");
  traceEvent (event);
  }
  
  
  I'm pretty much after the code of the language reference. The complete event is blocked or am I completely missed something obvious?
  
  I'll take suggestions or advice! Thanks in advance for the help!
  
  -Andy
  

  It seems that unless you keep a handle on the FileReference, flash will clean memory engine object it real quick. Which is what is happening here - even if the files were sent to the servlet without problem, the garbage collector has been sucking the FileReference objects until they could send the complete event.

  So the solution here was to place the FileReference object in a table just before download command and then remove it from the table when the end event is raised, so that garbage collection can collect timely.

  It was in fact in the documentation somewhere, but for some reason it didn't register only.

  Anyhoo... He is a good example of what to do about the specifications of lang in the FileReferenceList page under examples.
  http://livedocs.Macromedia.com/Flex/2/langref/index.html

  Hope this helps... someone. :-)
  -Andy

• Source: User profile Service event ID: 1530 level: WARNING

  Hello. I use a Windows 7 Home Premium OS, when I was checking on my event viewer I've found a warning that says:

  Windows detected your registry file is still in use for other applications or services. The file will be unloaded now. Applications or services that keep your registry file may not work properly thereafter.

  DETAIL-

  Register user 17 handles is escaped from \Registry\User\S-1-5-21-1835615311-242648943-3204298434-1004:

  2200 (\Device\HarddiskVolume3\Program Files\Common. process Files\Microsoft Shared Live\WLIDSVC (EXE) has opened \registry\user\s-1-5-21-1835615311-242648943-3204298434-1004-cles

  2200 (\Device\HarddiskVolume3\Program Files\Common. process Files\Microsoft Shared Live\WLIDSVC (EXE) has opened the key

  \REGISTRY\USER\S-1-5-21-1835615311-242648943-3204298434-1004

  2200 (\Device\HarddiskVolume3\Program Files\Common. process Files\Microsoft Shared Live\WLIDSVC (EXE) has opened the key

  \REGISTRY\USER\S-1-5-21-1835615311-242648943-3204298434-1004

  2200 (\Device\HarddiskVolume3\Program Files\Common. process Files\Microsoft Shared Live\WLIDSVC (EXE) has opened the key

  \REGISTRY\USER\S-1-5-21-1835615311-242648943-3204298434-1004

  2200 (\Device\HarddiskVolume3\Program Files\Common. process Files\Microsoft Shared Live\WLIDSVC (EXE) has opened the key

  \REGISTRY\USER\S-1-5-21-1835615311-242648943-3204298434-1004\Software\Microsoft\SystemCertificates\trust

  2200 (\Device\HarddiskVolume3\Program Files\Common. process Files\Microsoft Shared Live\WLIDSVC (EXE) has opened the key

  \REGISTRY\USER\S-1-5-21-1835615311-242648943-3204298434-1004\Software\Microsoft\SystemCertificates\Root

  2200 (\Device\HarddiskVolume3\Program Files\Common. process Files\Microsoft Shared Live\WLIDSVC (EXE) has opened the key

  \REGISTRY\USER\S-1-5-21-1835615311-242648943-3204298434-1004\Software\Microsoft\SystemCertificates\My

  2200 (\Device\HarddiskVolume3\Program Files\Common. process Files\Microsoft Shared Live\WLIDSVC (EXE) has opened the key

  \REGISTRY\USER\S-1-5-21-1835615311-242648943-3204298434-1004\Software\Microsoft\SystemCertificates\Disallowed

  2200 (\Device\HarddiskVolume3\Program Files\Common. process Files\Microsoft Shared Live\WLIDSVC (EXE) has opened the key

  \REGISTRY\USER\S-1-5-21-1835615311-242648943-3204298434-1004\Software\Microsoft\SystemCertificates\CA

  2200 (\Device\HarddiskVolume3\Program Files\Common. process Files\Microsoft Shared Live\WLIDSVC (EXE) has opened the key

  \REGISTRY\USER\S-1-5-21-1835615311-242648943-3204298434-1004\Software\Microsoft\SystemCertificates\SmartCardRoot

  584 (\Device\HarddiskVolume3\Windows\System32\winlogon.exe) process has opened \REGISTRY\USER\S-1-5-21-1835615311-242648943-3204298434-1004\Software\Policies\Microsoft\Windows\Safer\CodeIdentifiers key

  796 (\Device\HarddiskVolume3\Windows\System32\svchost.exe) process has opened \REGISTRY\USER\S-1-5-21-1835615311-242648943-3204298434-1004\Software\Policies\Microsoft\Windows\Safer\CodeIdentifiers key

  2200 (\Device\HarddiskVolume3\Program Files\Common. process Files\Microsoft Shared Live\WLIDSVC (EXE) has opened \REGISTRY\USER\S-1-5-21-1835615311-242648943-3204298434-1004\Software\Policies\Microsoft\SystemCertificates key

  2200 (\Device\HarddiskVolume3\Program Files\Common. process Files\Microsoft Shared Live\WLIDSVC (EXE) has opened \REGISTRY\USER\S-1-5-21-1835615311-242648943-3204298434-1004\Software\Policies\Microsoft\SystemCertificates key

  2200 (\Device\HarddiskVolume3\Program Files\Common. process Files\Microsoft Shared Live\WLIDSVC (EXE) has opened \REGISTRY\USER\S-1-5-21-1835615311-242648943-3204298434-1004\Software\Policies\Microsoft\SystemCertificates key

  2200 (\Device\HarddiskVolume3\Program Files\Common. process Files\Microsoft Shared Live\WLIDSVC (EXE) has opened \REGISTRY\USER\S-1-5-21-1835615311-242648943-3204298434-1004\Software\Policies\Microsoft\SystemCertificates key

  2200 (\Device\HarddiskVolume3\Program Files\Common. process Files\Microsoft Shared Live\WLIDSVC (EXE) has opened \REGISTRY\USER\S-1-5-21-1835615311-242648943-3204298434-1004\Software\Microsoft\SystemCertificates\TrustedPeople key

  My computer works fine I just want to know the solution to this issue.

  Thank you!

  Hello

  Welcome to the Microsoft community!

  According to the description, it looks like an application provides an observer event log.

  This error occurs is because the Service that runs is not properly managed by the computer.

  See this article for an explanation.

  Event ID: 1530 can be recorded in the journal of applications on a Windows Vista-based or Windows 7 client computer:
  http://support.Microsoft.com/kb/947238

  The service involved in your case is the Windows Live ID Sign-in Assistant service. This service is used when you connect to a Web site that requires Live ID authentication, as the Microsoft answers Forums.

  a. open Control Panel/Administrative Tools/Services.

  b. scroll down to the Windows Live ID Sign-in Assistant service and double click on this service to open the dialogue parameters .

  c. ensure that the Startup Type: is set to Automatic.

  This is a common warning for some services and can usually be ignored, unless you are having problems with this component specific (Windows Live ID).

  Hope this information helps. Answer us if you have problems with Windows and we will be happy to help.

• Several events triggered by a change

  Hello

  Now trigger several events with changing a field to single user. In Lookup.USR_PROCESS_TRIGGERS, I have defined the field twice and associated with two different events. My search looks like:

  Key code	Decode
  USR_FIRST_NAME	Change of name
  USR_FIRST_NAME	Change of name
  ...	...

  It works perfectly, but it seems that the duplicate key of Code to randomly disappear after awhile, leaving me with a single entry for USR_FIRST_NAME. Is this normal? Is there another way to make a single field 2 events fire?

  Thank you

  -jtellier

  You're hurting.  You should have that key in code duplication.  Here's what you can do however.

  Key = USR_FIRST_NAME code decode = change of name

  Now on your definition of the process, as long as the task starts with "change of name" you can add as many instances as you want.  You can create the following tasks and they will all trigger:

  Change of name

  Change of name - full name

  Change of name - display name

  Change of name - Email address

  Just the first part of the questions.

  -Kevin

• An event of a ring of Menu when the user selects the element itself

  As the subject says: I have a ring of menu.  I want to trigger an event if the user clicks on a menu item that has the same value as the vehicle currently has.

  I considered dynamically by registering on ' Ring: Mouse Down ", then pulling the value from that - but I can't understand how to tell if they clicked on the inside or outside of the menu box. Also, I can't assume the menu box, it appears is always the same size, because I'm creating programmatically values of the ring.

  Any thoughts?

  That shed light on the issue. Use a drop-down list box. Any selection in a list box drop-down is always a change in value, so you can use the value change event and capture the same selection twice. I tried and it works. Selected 'Test 1' over and over again, and it still triggers change in value.

• I want to run a vi that has a switch that passes between when run in vi It gives meeesage the highest level VI stopped for the unknown

  I want to run a vi that has a switch that passes between when run in vi It gives meeesage the highest level VI stopped for the unknown

  What should do?

  bisso92,

  You must be more specific...  When you say that you want the cover to be visible when it is called, I suspect you mean sub - vi.  You can go to the menu:

  File > properties VI then select the appearance of the window, followed to customize and select "display panel when called.  You can also select close thereafter, while initially closed.

  There are other "tricks", such as the incorporation of secondary school within your main VI, in this way, you can see both.

  Normally, a hand VI (or main function in other languages), would still present so that the operator can perform other operations.  If so you should look at using a Structure of the event with a producer / arrangement of consumer, where the consumer in a loop has the case structure where the sub-vis.

  To learn more about LabVIEW, I suggest that you try to watch some of these tutorials.

• Structure of files in Windows 7 - how Desktop level is related to the level of Documents

  It seems that the highest level in the structure of files in windows 7, for a specific user, or office. The documents appears to be a sub-level.

  If I can change this hierarchy and if I don't me I run in trouble? (in my mind, the office is subservient to the Documents. Desktop is

  simply a place among many others that a document can be stored). So if I had to continue my logic, I would have the following as

  the structure:

  machine

  user

  documents

  Visual

  auditory

  network

  devices of

  subservient to my questions above, I'd love to know the entire tree structure of files for windows 7, and if possible, how it can change for windos 10

  Thank you.

  Let me clarify a few things quickly.

  'Computer' is really just a way to see all top level in one place, which is your access to the physical storage devices, IE the hard drives, CDs, flash drives, etc. (who receive a letter, that is to say C is your primary drive which includes your OS, E is an external hard drive, F corresponds to the DVD player) K is a player flash etc.). These devices are your higher real level.

  On the next level, all but C (the disk containing the operating system) is pretty much defined by someone ' u as the user put into it, apart from all the files in the device really should run, that in general, you won't see, and whatever it is pre-installed, which usually take.

  The second level to the C drive, however, is a little different. While you can add your own folders generally however you want to, by default, it includes a number of files that manage operations for your OS and your manufacturer, performance logs, fonts, etc. and the file you are looking for specifically, users. The latter contains folders for each "user" of your machine (user accounts, files accessible to the public, in addition to the files for some programs that run out of any user account, not your system). In this case, you must, in addition to your own files and folders, you decide to put there, a number of files 'default', like Documents, desktop, Favorites, etc. These are paths to commonly used files, and some have uses within your system (IE desktop contains your desktop, Favorites contains your Favorites from Internet Explorer, etc.).

  To my knowledge, Windows manages the movement of these types of cases, but I have not dealt with it before, I let someone else to answer if it's ok to do, and what would be the possible consequences.

• «operation cannot complete error 0 x 00000709.» Double check the name of the printer and make and make sure that the printer is connected to the network. »

  Original title: Error 0 x 00000709...

  Error 0 x 00000709... I get this message because I bought a new laptop printer a canon IP100.   My computer won't let me not choose as a default printer at all and it comes up with this message:

  «operation cannot complete error 0 x 00000709.»  Double check the name of the printer and make and make sure that the printer is connected to the network. »

  I had trouble terrible., the only way I was able to use it is to remove the other printer but then again used I would have like a detauls.

  Can someone tell me how to fix this error, I would apreciate any help I could get with that.  I have two printers in the same time, one for the front desk and the other mobile.  I'm sure that someone out there knows what to do?  Thank you

  Hello

  Please follow the suggestions posted on April 16, 2013 by me from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/printing-error-0x00000709-when-i-try-to-make-my/a8235379-07ad-487e-b9e8-e041f3a715ee

  Please back up the registry before making changes.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope that the information provided is useful. Do not respond if you need more help.