Wondered suddenly connect! Can't do it! Dead in the water!

Similar Questions

• The payment change ADOBE info Web page fails - I can't scroll down to save the changes. My subscription is expired and I am dead in the water! I can't find a support customer portal to this problem - HELP PLEASE!

  I can't scroll down to save the changes. My subscription is expired and I am dead in the water! I can't find a support customer portal to this problem - HELP PLEASE!

  catsrock

  Great salvation,

  We are sorry for the inconvenience caused to you!

  I recommend you contact customer service regarding this issue.

  Kind regards

  Rahul

• Dead in the water and stuck to select F1 or F2

  Windows xp home edition with Dell Dimension 4300 desktop.  I'm completely stuck on the select line of F1 or F2.  I have reset the BIOS to the latest version A06 and also replaced battery.  While there, has blown sheep of dust from the fan and checked all the electrical connections and cables.  Re-broken in memory.  Luckily, I backed up all the files on a disk before being completely stuck and I have a laptop that I can use.  But I miss my office.  Should I reinstall Windows XP Home Edition?

  Primary transmission BIOS 0 said peripheral unknown or sometimes offshore; primary transmission 1 is disabled; secondary drive 0 is the CD-ROM drive and secondary drive 1 is the CD-Rom drive.  Boot sequence is also 1.  Floppy drive 2.  IDE CD-ROM device.  I don't know if these settings are correct, but they are the courses in my BIOS.  I tried e Alt, Alt f and b Alt also.  Any suggestions appreciated because I am dead in the water.

  It is always best to do a clean reinstall and not a recovery or repair install, your manual should have instructions and you don't want to do a reinstall on a bad drive, here are some sites that you can check.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  http://www.WindowsXPHome.WindowsReinstall.com/sp2installxpcdoldhdd/indexfullpage.htm

  http://aumha.NET/viewtopic.php?f=62&t=44636

  Clean install XP sites

• I just medication my workspace to my second monitor, and now it won't slide back. Means to a project and I'm dead in the water.

  I just medication my workspace to my second monitor, and now it won't slide back. Means to a project and I'm dead in the water.

  I tried the following:

  1. Restarted.

  Quit Photoshop and reoipened.

  disabled the 2nd monitor.

  Preferences studied.

  Tried to change the size of the work place to get something to drag.

  Google asked

  I have Photoshop CC

  Select the Essentials workspace.

  Reset the Essentials Workspace.

  Job done.

• All of a sudden, I can't print an information page - the statistics of my site.

  I have a personal Web page hosted by IPage - lynnesgenealogy.com. I get monthly statistics of visitor on this page. For the last two months, I got a terribly large number of hits (over 20,000) on my site of Asia (more trace of China and the Japan IP addresses, but not all). During the outbreak of this issue with IPage I discovered I can print is more statistics page, as I have in the past. I deleted all cookies, cache, history, etc., etc. In Explorer, I can only print one page (the report is several pages long) at a time - but in Firefox I get a blank page. What's the story?

  "This frame" doesn't appear in the menu when the page you are clicking on a framed page. So you won't see it most of the time.

  There are two types of framed pages:

  • Traditional: The server sends a frameset page instructing the browser to load individual pages in different parts of the frameset do to the top of the entire page. AWStatus uses a traditional set of frames.
  • Online: the page contains a rectangular area which incorporates a completely different page. When you see a YouTube video embedded in a different site, it's usually by an inline frame or 'iframe '.

• TRIED TO INSTALL VISTA SP1 NOW I'M DEAD IN THE WATER

  I am running Vista Home Premium 32-bit on a Dell desktop computer. A month ago, I came across a few major problems with my computer.  I couldn't get out of safe mode, programs are not run properly, blah, blah.  With a lot of help, I finally could get all back to what I thought was normal.  I ran antispyware, antimalware & and with other tweeks & fixed I have not noticed problems for about a week.

  So last night while on the computer, I got the message that Windows is ready to install an important update.  It was SP1.  I usually wait until the middle of the night & let Windows automatically install the updates but I thought why wait, then I started the installation.  He said that it could take several hours, I went to bed and I forgot about it.

  This morning I wake up to see that the monitor is all black except for a single line of printing:
  !! 0xc01a001d! 37354/98242 (\Registry\Machine\components\derivedata...)

  This printing line flickered sort of as he wants, but he was stuck.  I failed to continue or stop so I finally did what was once called an illegal arrest... I don't know if there is a new term for this, but I think you know what I mean.  When I turned my computer back on, I got the message that something caused my computer do not close properly, perhaps a new program or software, and he suggested that I have let Windows find & try to fix the problems.  I clicked on that and the blue bar began to run through the progress window.  He says that it can take several minutes.  Well 2 hours later nothing had changed.  He was always doing exactly the same thing.  He wouldn't let me cancel so I let it run half an hour.  Then I finally made another "illegal stop."  When I turned the computer back on I chose normal startup to the top even if the computer suggested I have start the repair program.

  Now I know whence the line of print that I mentioned before.  The screen was black except that it begins to show all the things that are installed on the computer.  At least, I guess that's what it is.  It was like when your computer is running antispyware or something & all files are being checked.  In any case, it's exactly the same thing that what I pointed out, it was on my computer first thing this morning except that it stopped at 28599/98242.  He has not moved or changed except it flashes as he wants to spend but cannot.

  What is the cause & do - what do I do about it?  Trying to do a system repair did not work & I can't get the computer starts normally then now what?  SP1 is installed on our laptop with no problems.  The only difference is that I let it install automatically.

  Please help before I have eventually throw the top of desk by the window!

  Sandee

  Sandee,

  David advice was correct.

  Read all the info on the link below.

  You need to download the ISO file, I talked to the computer on which you post here, not the broken one!

  It is a repair disc you need to do from this ISO file:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  If yours falls into the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  It's a very good Vista repair disc.
  You can do a system restart tool, system, etc it restore.
  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  Mick Murphy - Microsoft partner

• Dead in the water

  Equipment:
  Gateway NV57H, purchased new laptop, 8 GB memory, Windows 7 x 64 (OEM version, I guess, came installed on the new computer in 2010 MS sticker on the bottom with the product code) also came with Office 2010 student and something thing-or-other (not Outlook)

  The problem:
  I have an Office 2010 Suite of all kinds, excluding Outlook. Outlook 2003 is installed separately from 5-6 years. Outlook locked some yesterday, nothing but problems now. I have resorted to a system restore to a point, two days earlier, but after the restoration of the system, received a message that it could not start up. I received a message to solve the problem using a choice of several recovery methods, the only one I had for me was the system recovery DVD 5 discs that I was asked to do when I bought the computer new. The first records of three recovery went well, with the prompt to insert the next disc, etc. But when I inserted the disc 4, nothing happened. After 10 hours of nothing happens (at this time they say has been updated of the files, it was still on the 1% that it began to leave and still do nothing)... anyway, not knowing what to do I arrested him, hoping to be able to start the recovery process. No dice. The situation is now at the point, if I turn on the computer, it tries to start, but not a enough of the OS to do it, so that it stops and resumes restarts, again and again. So my question is, can it be fixed or I'm SOL?

  Try a factory restore.  In your case keys Alt + F10 at startup.

  If the partition is still there, it should replace the contents of your disk in its entireity with a double précis of what was on him when he left the factory.  No product key required or install disk if it works for you.

• Help me... Does not install, won't clean up.  Dead in the water

  Only works with google chrome and not a pdf file preview in windows Explorer.  Chorme has been uninstalled in anticipation of this problem being cleaned.  There are remnants in locallow and roaming but no exe.  What is the manual method of cleaning it so I can install again?

  Incorrect answer.  It turns out that Acrobat Reader XI was the

  problem.  This has probably stuck when an attempt is made to install

  Acrobat Reader DC, who has been having problems with windows

  Preview pane of the Explorer.  This deletion process is different.  I found that

  you need to scroll to locate the removal of Acrobat Reader XI

  tool.  Users who have problems with the installation should run two removal tools

  due to problems that might occur when users try to install

  Acrobat Reader DC.

  I had the system cleaned and installed Acrobat Reader XI and

  everything now works again.  DC is for cloud computing which was

  the origin of evil.  System performance has gotten a lot better

  After got rid of him.

  ...

• Any update on 9.3.2 bricking ipad 9.7 pro model? IM dead in the water.

  Caught in an infinite loop of the error 56. tried both windows and mac computers with the latest updates and itunes. Also tried downgraded to 9.3.1 with IPSW file. Same mistake. Anyone with a bit of luck with this?

  At this point, I make an appointment at the Genius Bar at your local Apple Retail Store or contact Apple by phone to make other arrangements.

• opens any after automatic update! dead in the water!

  yesterday, I learned that an automatic update has occurred. for 6.blah.2 or something. I do not know. I was immersed in the constitution, and Thomas Jefferson was waxing her ass. In any case last night I stop, everything is right with the world. This morning I try to log in to see if my teacher is all-new for me... nothing. Sure, no coffee, maybe I'm not awake, kidnapped by ailens. Then I stopped and try again. Nothing. But IE has worked... So here I am... That is what it is?

  Firefox does not start

  • https://support.Mozilla.com/en-us/KB/Firefox%20Will%20not%20start
  • http://KB.mozillazine.org/Browser_will_not_start_up

  Check and tell if its working.

• PowerEdge C1100 dead in the water...

  Hello PowerEdge general HW Forum:

  My C1100 is in a solid error condition. When is powered by plugging in, turns on, but the system is not responding. The power switch on the front panel is not working. The malfunction orange/orange light is on and the blue system ID led is lit on the front panel. The BMC do not boot or system. I went through the steps listed in the owner's manual in order to remove all hardware except for the motherboard I did not spare any currently of troubleshooting. Any ideas? System consists of standard C1100 with four slots hdd SATA 2 with a filled, 2 Xeon processors and ram, 72 GB (18x4mg). During the last inspection of the system with BMC all (fans, temperatures, voltages etc) seemed to be nominal. Thanks for all your comments!

  lnelson15

  Hey thanks for the reply. Too late for this one I returned it to where I got it. This box was as we say 'HOSED '. The only way of
  Get you to start or do anything to plug into AC. At that time, the power supply fan would come on, the malfunction and lights the system ID led will be on and the power supply fan would go but there was no power to the system that food has not obtained the power_good signal # of the
  system on board so it would just sit... for hours until that unplug you the unit (I could jump the power_good # anchor in the connector 24 pin and turn on the power supply with a paper clip to ensure that food was good). Also the switch power light is not lit or flashing (as it is for the BMC to start). All the switches and buttons if unusable reset permanently. On all 8 time or while I plugged it the power would come for a reason, fans would come on wide open as it's correct when they have no control of the BCM, the fault and system ID lights would come on and the power light would come on but the power switch would be ineffective because the BMC has does not start. It would also sit like that for hours (or until we couldn't listen to the fans more) until this that unplugged. Believe me, I looked for any sign of activity of the BMC from (this is what is happening on the minute or two until the BIOS starts the POST) or BIOS.

  For me, the worst, it was Dell indicated that they were going to cover the case, until I had them sending me a Council system when shipping guys who send the discovered parts the box I bought was provided by a group within Dell somehow involving Dell Financial and the so-called guarantee was not guaranteed at all. That's why the serial number (DNJQQL1) would not work to any Dell Web sites. At this point, I would have to put this somewhere taboo system map in someone unmentionable. Sorry, but that left me funky for a day or two. I am okay now that it is just an inanimate object and fortunately we are driven. I just got to the training anyway. He didn't charge up to version Windows Server 2012 Datacenter no problem as well as a copy of the same in Hyper-V before other problems to become inoperative.

  Here's what one I had looked like but mine was usually the fairing of ventilation in place. This image came from an ebay store sells more than one of these servers. They are falling like dominoes, now data centers and operations are trying to recover part of their costs. That's why they are sold in the range of $500-600 for a housing and even less in quantity.

  

  Glad you come back your!

  Best... Lee Nelson

• All of a sudden I can't order prints on my computer. I get a message saying that it is impossible to establish a connection. That is what it is?               NG who

  All of a sudden I can't order prints on my computer. I get a message saying that it is impossible to establish a connection. That is what it is?

  It is almost impossible to help until that give you more details.

  • What application or website are you trying to order prints of?
  • Which iMac do you have?
  • What version of Mac OS X are you using? Is it really 10.6.8?

• I use a dongle for my internet but suddenly I can't connect. "" When I run windows diagnostics I get this message "not set up to establish a connection on the port.

  Internet connection problem

  I use a dongle for my internet but suddenly I can't connect. When I run windows Diagnostics I get this message... "www.microsoft.com"is not configured to establish a connection on port "service world wide web (HTTP)" with this computer. Can anyone help please?

  Hello

  (1) don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps:

  Method 1: Try to start your system in safe mode with network and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Follow these steps to reset the computer to start as usual:

  (a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  (b) under the general tab, click the Normal startup option, and then click OK.

  (c) when you are prompted to restart the computer, click restart.

  Method 3: Of connection problems in Windows wireless and wired network:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this information is useful.

• All of a sudden, I can't open a tab, even if I see the sign +...

  All of a sudden, I can't open a tab by clicking the sign +. I can only open a tab if I click with the right button on a bookmark and choose "open in a new tab.

  Uninstall the Ask Toolbar. It can cause this problem.

  • http://support.Mozilla.com/en-us/KB/uninstalling+Add-ons
  • http://support.Mozilla.com/en-us/KB/cannot%20uninstall%20an%20add-on
  • http://KB.mozillazine.org/Uninstalling_toolbars

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please? I can provide screenshots.

  Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please?

  I tried to provide screenshots - insert an image does not accept.

  

  

  Just happened while the iMac was asleep.

  Thanks in advance

  Tony

  The image seems to reflect the possibility of problems of graphics processor.

  Some models had a history of failure or bad solder connections. others may

  have a combination of capacitors & other materials; Finally we have to fix.

  https://DuckDuckGo.com/?q=imac + 24 - anomalies graphics + 2008 + in +& t = ffsb

  One of the remedies for a graphics card problem, is a re - weld made by the

  users who have taken their card from the computer & their cooked in the kitchen oven.

  This idea has worked for some; You may be able to contact an authorized Apple

  Service provider or see if any of the parts suppliers in line can answer questions

  availability of replacement given to nine graphics cards, if you were

  can be removed from the logic board or if it is affixed, or welded to the card.

  An iFixit.com repair guide for your series of iMac (Intel-processor 2008) 24 inches

  can show that if that article can be virtually eliminated, if if will show process.

  https://www.iFixit.com/device/iMac_Intel_24%22

  The details of the computer in the bottom of your post isn't an iMac G5 model, and

  There is no powerPC G5 processor equipped Macs after late vintage

  2005 to early 2006; If the computer in the discussion is a G5 is not 24 inches

  and would be a model of Intel. They use a different architecture than G5

  powerPC even though in some respects are similar at least in the General design.

  This contains all guide ifixit for iMac G5 Power repair (there is no 24-inch model)

  https://www.iFixit.com/device/iMac_G5

  If you have an iMac with Intel processor and an older iMac PowerPC G5, specify.

  Don't know if a reset of the SMC or likely to alter the symptoms or change NVRAM

  the Visual problem on the screen; an underlying hardware problem is a likely cause.

  • Reset the management system (SCM) controller on your Mac - Apple Support

  • How to reset the NVRAM on your Mac - Apple Support

  If this is your model iMac (24 inch Early 2008) follows the model of generation identifier:

  Introduced April 2008

  Abandoned March 2009

  IMac8, 1 model identifier

  Model number A1225

  EMC 2211

  MB325LL/A order number

  First Prize $1 799 (2.8 GHz) $2 199 (3.06 GHz)

  You may be able to find the numbers of reference and research for replacement new or repaired

  old stock graphics cards. A friend had one of these models of iMac 24 inch 2008 and

  It failed due to a graphic processor; where she lived the BestBuy did not fix

  She even if it has been purchased by them with their extended warranty; No applecare.

  So, there are some out there in almost perfect condition, but not fixed, always.

  Do not know if the charges involved would be the value relative to the other

  later construction that can have no history of similar design construction. {Confirm the identity of the iMac.}

  Sorry I don't have any new ideas regarding this problem.