Word: selection of nodes of property-> Ref.Number is 0!

Hello

I'm trying to set a property of Word in LabView. The problem is that the property selection node always gives me a 0 return ref.number!

This is why I can't put anything because of an error that is generated later. I use the version of word 2010 with the SP1 of 2012 of LabView.

Someone knows how to fix this? Is a registry key missing, perhaps? Joined a demo-vi.

Thanks in advance

The code works OK for me.  I open MS Word, type some text, select text, run your VI and it returns without error.

Of course if I run that without open MS Word or any selected text it returns 0.

Edit:

Also makes long MS Word is open tracks VI OK (even with no selection)

Tags: NI Software

Similar Questions

  • From Word to PDF format without changing the number of pages

    When to convert a 320-page document Word 2013 in PDF using Acrobat, the number of jumps to 331 pages, change notes, sections... How to fix? TX

    To develop on the response from Michael Kazlow, the problem is not caused by windows, but rather how Microsoft Office applications format their text. The issue is not just with words, but also with any other application Office as well. In addition, it is not a question of if you create the PDF file using the instance of driver Adobe PDF PostScript printer, but on the contrary, when you compose the document while the instance of Adobe PDF PostScript printer driver is the printer by default/current in Word!

    These applications format text using fonts that are standard to the current output device resolution. For example, if you view a document in Word and the currently selected printer (usually the default printer selected in Windows when you start Word) is a resolution of 600 dpi device, the document is formatted with a space for each character measured in units of 1/600, an inch. If you change the active printer or print to a printer with a resolution different game, Word reformats the document using fonts based on the new resolution. The resolution is 1/1200 inch in the case of the PDF Adobe PostScript printer, default, driver instance. In general, more text fits on a page with text lines long when a higher resolution is used and less text fits on a page with long lines when using a lower resolution. If your default printer is a high resolution, you can see the resolutions up to 2400 dpi, for example.

    Microsoft Office applications are also known to reformat pages based on other parameters such as the printable area.

    These questions just do not affect the creation of PDF, but also print on different devices producing different line endings and pagination.

    To make matters more things, when either you Save to PDF using the ease of creation of PDF of the Office, or even Save as Adobe PDF using Acrobat PDFMaker Office (part of Acrobat) installation uses yet a different mechanism to reformat the page, as productive at the end line inconsistencies and pagination of what you see on the screen or print directly from Word to a particular device. (We don't know exactly what mechanism Microsoft uses in these cases to cause gaps.)

    Office and Adobe users have complained to Microsoft this behavior general for more than 20 years and apparently this isn't any priority to Microsoft to resolve this issue.

    -Dov

  • Value of the selected tree node

    Hello

    I'm new to Apex (4.1.1) and I'm having a small problem.
    I had 2 Pages. The frist one is composed of a treeregion and a "submit" button.
    The Second is a report.

    I want to create a workflow, the user selects a treenode shipment and presses. Then it will be redirected to the reportspage,
    that will show him a report according to the treenode that he selected on the first Page.

    Problem:
    I don't know how I can read the value of the selected treenode.

    I hope you can help me.

    Thank you
    Frédéric

    Hi Frederic,.

    To get the value of the selected tree node, you can make use of the "selected Page element node' attribute on the attributes of the tree page. Just create an element of your page and set the "Page of selected node element" of this new item page. Then fill the point via the BINDING of your tree query parameter. For an example, take a look at the following: http://apex.oracle.com/pls/apex/f?p=36648:6, where I put my point page P6_SELECTED_NODE to the value of the node selected in the first tree that is empno. Your report query must refer to the node selected item "Page, to make sure it displays information about the selected tree node.

    I hope this helps.

    Kind regards
    Hilary

  • PXI-5412 - discontinuities and dynamically modify the frequency with niFgen nodes of property

    I'm trying to find a way to eliminate discontinuities and change frequency/amplitude on the fly.  Is there a simple way to do this?

    Basically, my ultimate goal is as so:

    Table:

    Start Stop Freq Freq dt

    1                          100                     10

    100                      1000                   5

    1000-5000-10

    When you start at 1, then move to 100 after 10 seconds.  Then you would go from 100 to 1000 after 5 seconds.  And finally, you would go from 1000 to 5000 in 10 seconds.

    I use the niFgen Util creation frequency sweeping of data VI to create all the necessary frequencies.

    I use nodes of property niFgen to try to achieve.  I use a simple loop to move through a frequency table, and I update the frequency as follows:

    I have everything set up and works, the only problem is that I have large discontinuous jumps whenever the frequency gets really changed.  Unfortunately my oscilloscope are boring with the Print Screen function, so im trying to recreate using MS Paint:

    Clearly not the best artist ever, but you can get the general idea.  I get these discontinuities in the shape of V that are particularly sensitive to the peak of a wave.

    Someone at - it a good suggestion on how I should go about it?  I'll put in place the generation as follows:

    Looks like you are using the operating mode Standard to do this, correct?  The best way to go about this would be to use the frequency list mode, but the 5412 doesn't have this feature.  I have seen documentation that the use of property with Standard function nodes can definitely cause these kinds of discontinuities.  Another method is to use the arbitrary sequence mode, take a look at the niFgen "Arb Example.vi séquence" in the finder for example LabVIEW as a good reference on how to do this.

  • What are the alternatives to the update of the indicators using nodes of property?

    Hello

    I'm building a VI that must update several controls/indicators in several points throughout its execution. It must also be able to accept the new values of the controls at any time.

    The problem is that all these controls and indicators on the face before of the VI another who called my VI. The current version of my program updates all these controls and indicators using references and property nodes (each indicator/control to be used has its own reference on my VI control, and these references are then sent to nodes of property), which makes it naturally slow.

    At the moment I plan to rebuild my VI so that the principal is able to recover data without the help of the references, but it is not only a lot of time but also difficult and impossible without my code turning into a massive pile of disorganized (especially since the lab computer is quite slow and the main big enough VI that by pressing the button "clean/re-organize block" causes a crash).

    Alternatives to this? Queues?

    This (my nugget events) is the best general solution, I came here.

    Felix

  • Spread the word selected in the e-mail application regarding

    Hey, I have a question about how to get the word selected in the mail application. My application needs to get the word selected out of my request and pass it to the application. Thank you!

    There is no published API that will give you what I know.  I think you have two options:

    (a) tell the user to make a "copy" before calling your ApplictionMenu.  You can check there is something in the Clipboard and displays to confirm that it was what they intended.  That's what I would do, because it is safe and supported.

    (b) in your ApplicationMenu, you can possibly find and copy yourself him are selected as follows:

    Field currentField = UiApplication.getUiApplication () .getActiveScreen () .getLeafWithFocus ();

    If (currentField instanceof ActiveRichTextField) {}

    ARTF = currentField (ActiveRichTextField);

    artf.selectionCopy (.);

    }

    Note that I have NOT tried or even compiled this code, and if can be that the field is not an ActiveRichTextField, and you should probably also check that the field is selectable and/or the selection can be copied before you do it anyway.

  • Selection of nodes in tree ADF using the checkbox

    Hello

    I have a tree of the ADF based on two your (Master VO and VO child referential cottages). I have a requirement to select the nodes in the tree using a checkbox for each node in the tree. I need to move the nodes selected for the TF call by clicking on the OK button. The problem that I am running is

    Ideally if I can add the node in a list, whenever the checkbox is enabled or delete it from the list when the check box is not selected, it would have been the best solution. How ever on by activating the check box for a node directly the change event of the checkbox value is raised before the selection event and so I do not have the current node. Is there a way to implement a tree ADF with selection of the checkbox for all nodes?

    Currently how I implement it is clicking OK I iterate over all records to see which has the transitional attribute corresponding to the box set to true but it must treat all records in the tree and it is an expensive process, especially when my tree is much larger.

    Thank you

    Hi user,

    I don't know if your 'best solution' is actually the best, but I can help you get there.

    Check this blog for you will learn how to ID in the changeValueEvent box.

    ADF tips: how to get the value of the user interface components. | Oralublog - Blog of Oralution

    In the example I use an actionEvent. The changeValueEvent should give you the same functionality.

    Now that you have the RowId, you might be able to achieve your solution using your list.

    Concerning

  • Select the node in af:treeTable

    Hello! My task is to change custom selection works on af:table and make it work for treeTable. Do the current method, I took this tutorial http://www.oracle.com/technetwork/developer-tools/adf/learnmore/25-generic-tree-selection-listener-169164.pdf

    And here's a method I have to change:

    public void TblStagesOnSelect (SelectionEvent selectionEvent) {}
    GeneralFunction.makeCurrent (selectionEvent);
    If (treeTable.getRowAtRangeIndex (treeTable.getCurrentRowIndex ()). GetAttribute ("IdParentStage") == null) {}
    parentUser.setAttributeValue (tf_idUserRespRequest.getValue ());
    } else {}
    for (int i = 0; i < = treeTable.getEstimatedRowCount () - 1; i ++) {}

    If (treeTable.getRowAtRangeIndex (treeTable.getCurrentRowIndex ()).getAttribute("IdParentStage").equals (treeTable.getRowAtRangeIndex (i) .getAttribute ("IdStage")))

    {

    parentUser.setAttributeValue (treeTable.getRowAtRangeIndex (i) .getAttribute ("IdUserResp"));
    break;
    }}}}

    This method has been written to the table, but it does not work on treeTable. Can anyone help?

    did you check that

    JDeveloper, Oracle ADF & amp; Java: Tree Table component in Oracle ADF (hierarchical representation)

    http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/26-get-selected-tree-node-data-169165.PDF

  • Clear the selection of nodes on the table of the Trinity

    Hi all

    We have an ADF application 10G. Selection of nodes in tree in the pages which can be enabled or disabled programmatically like this:

    < af:treeTable binding = "#{treeBean.treeComponent} '"
    var = "treeItem".
    disclosureListener = "#{treeHolder.processDisclosure} '"
    expandAllEnabled = "false" >
    < f: facet name = "nodeStamp" >
    < af:column >
    < af:panelLabelAndMessage >
    < af:outputLabel value = "#{treeItem.nodeName}" / >
    < / af:panelLabelAndMessage >
    < / af:column >
    < / f: facet >
    * < f: facet = 'selection' name > *.
    * < text af:tableSelectOne = 'Select items' disabled = "#{treeItem.addNodeNotSelectable}" / > *.
    * < / f: facet > *.
    < / af:treeTable >

    However, facet 'selection' has been removed from Trinidad treeTable . How to toggle the treeTable programmatically nodes? We want that tree nodes to extend completely than just that the user should not be able to select some of them using the option button.

    rowSelection = "simple/multiple" recounts only if the user can select one or more nodes.

    Thank you

    Published by: user12054715 on November 16, 2011 10:57

    If you read "anger" in my answer, you picked up something that don't is not there - I don't was any "angered."

    Allow me to paraphrase what I said:

    According to my understanding of the documentation of Trinidad (link above), the tree table doesn't have this capability more, and therefore, we can not do.

    Update - I went back and read my original answer above and can see how you got the impression that I've been "angry" - I should have phrased differently. No intended anger. Note for later: don't post answers to the OTN late at night when you're tired :)

    Sorry for the wrong impression.

    John

  • E4X: Select the nodes that match a criterion, and whose children match to another

    Hi guys,.

    I'm writing a query of E4X to select the nodes that match a criterion, and whose children match to another. My actual dataset is a little more complex than this example, but this one is easy to follow.

    Say that you are modeling a hierarchy of nodes, where each node can have zero or more parents and children. The XML file is a simple index of nodes, and each node contains their immediate parent and child relationships. In this way, you can start with a given node and build a tree in a direction any to any depth. As an extra flavor and selection criteria, each node has one or more colors that are associated with.

    Here's a sample:

    nodes <>

    < node id = ' a' >

    < name color = "red" / >

    < child id = 'b' / >

    < / node >

    < node id = "b" >

    < name color = "red" / >

    < name of color = "green" / >

    < parent = 'a' / >

    < child id = "d" / >

    < / node >

    < = 'c' node id >

    < name color = "blue" / >

    < name of color = "green" / >

    < child id = "d" / >

    < / node >

    < node id = "d" >

    < name of color = "green" / >

    < id parent = 'b' / >

    < id parent = 'c' / >

    < / node >

    ...

    < / node >

    Now, say I want to select all nodes root (those who have no parent relationships) that are red. This is the best I could come up with:

    var nodeChildren:XMLList = nodeData.node. (! hasOwnProperty ('parent'))... Color. (@name == "red");
    for each {(var childData:XML in nodeChildren)
    var childID:String = nodeData.parent () .@id;

    }

    }

    The first line gets us 90% of the way by selecting all of the nodes of color matching, but we have all these entries to get the id of the node that contains.

    It is possible to select the nodes in one of the E4X without needing the loop?

    Thank you!

    Scott

    So how about this?

    nodeData.node. (! hasOwnProperty ('parent') & color.) (@name=="red").length () > 0)

  • changing nodes of property of another vi

    So I'll try to monkey proof a GUI, I have to disable/turn visible off, some controls according to the selection of the user and it back to visible/compatible with each other. Unfortunately, there are a large number of controls so my main prgroam becomes too big and too difficult to debug, so I decided to create a few sub screw to control each case and simplify the program. I read the help and is apparently possible to do but for the life of me I don't see how. I use the property of 'Node'--> selection of "link to" to bind the control, but it shows that the controls in the same Panel VI, although there are other screws in the same project.

    Can anyone help me or is it simply not possible.

    Thanks in advance

    Create a control of the main VI reference and pass in the Subvi and entry of reference on a property node.

  • Is there a quick shortcut to create nodes of property?

    Hello

    I'm trying to avoid local variables and instead use property nodes, because they are supposed to be the best in terms of performance. But the creation of a property node takes a long time. I have to carefully click on the point of the façade (or even find it in the block diagram) and navigating through a maze of menus and submenus.

    Is there some shortcuts where I can just select an object and use certain key combinations to create a property node (the default property could be the last opportunity this object property)?

    I don't remember if there is some special subforum or a thread dedicated to tips and tricks (I checked the wiki for that page), so posting here.

    Thanks in advance!


  • Dynamically manage the names of legend by using nodes of property

    I have to draw several temperature - time data on a XY Chart. Now traced works perfectly fine, but when I try to stup the legend name using property nodes, it gives error if I use something like in the first picture. It seems that the "ActPlot" property cannot access values greater than 1. Works perfectly although for two plots.

    I tried to use one for, as in fig. 2, it does not work. It blocks every time ActPlot hits 2.

    Suggestions or advice?

    Hey,.

    Please test the attached VI (registered to 8.2) to define the names of the plot, use it as a Subvi.

    BTW, in your second picture you have connected 3 to the connector of the loop for AND and autoindexed table with 3 elements.

    Christian

  • How to add context help text to node in property of an XControl?


    Hi Vsh,

    You can set the contextual help of property by right clicking on the xcontrol in your Project Explorer, select Properties, selecting the 'Settings for' category and clicking on the property that you want to write help for.  You will see a box titled 'Description' on the right;  This is where the contextual help is defined.

    I would like to know if you have trouble finding it.

  • Change the graph with nodes of property

    I've been struggling with this problem for a while now. I have a graph of simple waveform I want to set the horizontal scale to and then make a .png to file. The vi is attached. This vi is up to a lot more great vi. Does not work when I run the first level vi of the adjustment of the horizontal scale. The .png file I receive shows the unadjusted graph. However, if I open this vi and then run the first level vi it works - the graph shows the .png file scale properly. Also, if I just run this vi se it works correctly.

    I'm guessing there is a timing issue and the .png file is created before the scaling takes place, but I don't see how.

    Does anyone have any ideas as to why the scale does not if the vi is not open, when it is executed?

    If the front of the VI is not open, the nodes property can do nothing because they run in the UI thread.  This is consistent with the behavior you report with it works when the VI is open.

    Can you try to open the façade but putting off the screen (if the user does not see it) and then set the properties of the graph?

    Lynn

Maybe you are looking for

  • Lost after upgrade ios10 notes

    How is it possible to recover all the local notes that disappeared after upgrade to iOS 10? (On the iPhone 6) Thanks for help :-) Marco!

  • Firefox/Mozilla agree that Linus is as good as Windows, or better?

    I fed up with Windows always change things. I read about the use of Linus operating system & Firefox works well with it. However, I would like to know what Mozilla thinks of the Linux operating system. I used Windows 98 Excel to develop my system of

  • Edition OneOffice 365 by Microsoft for Macbook Air

    I recently bought the 365 Edition Microsoft ONEOFFICE for my MacBook Air via the Apple App Store. It is slow and the window does not open or view at all. I reinstalled the app after you remove it and still work ineffective. Any advice? Should I junk

  • Timeout on the COM port

    I have two ModBus vi that I combined into one in order to avoid two separate running both vi and both requiring the port com I took beginners approach and created a sub vi for each and then called in a new vi. Surprisingly, one of the sub vi will eff

  • The minute of Silence - will not work on Windows 7 in compatibility mode

    I just installed The Moment of Silence after not getting round to install in on my old XP laptop. It will run, citing that it needs to be played on a version from a version of Windows up to XP - compatibility does not work. I searched other forums th