work connection to router WRT610N dual band?

Similar Questions

• How can I connect two router WRT610N wireless via a modem

  My problem is that

  I want to connect a "wrt610n router" to moden directly cable yet and when I conect the two of them everything works fine and ITI gives good internet connection via WLAN

  Modem ip - 192.168.1.1

  first WRT610N router ip - 192.168.1.10

  But, when I tried to plug "second WRT610N router" by "first a router WRT610N" through second lan_cable(cat 5) router no internet connection provide (give)

  second router ip - 192.168.1.5

  so please tell me how can I solve this problem...

  This article may be able to help:

  http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=785463d9ecaf4cac84aed245b08d615f_3733.XML&PID=80&r...

• Is the dual-band WN3000RP?

  My WIFI router is dual band (2.4 GHz and 5 GHz).

  If I have 2 setting up WIFI networks with this router, will be my WN3000RP and then extend the two networks?

  Hi hansvdp,

  The WN3000RP covers only the 2.4 ghz band.

  Please visit http://www.netgear.com/home/products/networking/wifi-range-extenders/for more options

• Dell Wireless 802 1801.11bgn it will work on router dual-band 5 ghz?

  Hi all

  I have a Dell XPS 8900 Costco, Windows 10 i7 Setup.

  It has a Dell 802 adapter wireless network 1801.11bgn.  This card will work on 5 GHz with a dual band router/modem?  Namely this one don't know if this link does not work there a

  SBG6580 surfboard cable modem wifi router and
  We have 2 computers, mine is the dell with the above adapter, and the other just has a dongle to 802.11n at 2.4 ghz
  I wondered if mine can be configured to 5 GHz or should I spend too much and just get a cable modem/router which only works at 2.4 ghz.  Just trying to think ahead in case I update my card or if itself gets a new computer, I don't want to have to buy a new router to compensate or wireless card. I think that my laptop is also 801.11n
  Advice?  Its comcast if it's a need to know.  Thanks in advance!
  PS and how does phones work only on EVERYTHING and computers are so limited? (end of the mug shot)

  This wireless card does not work on 5 GHz, 2.4 GHz only.

  Buying a router dual-band (2.4 and 5 GHz) can be useful if other devices, such as a Tablet, can use 5 GHz. 5 GHz will be probably less crowded with your neighbor WiFi networks, but 5 GHz usually has a range of less than 2.4.

  Price is usually why PCs do not come with dual band WiFi. In contrast, the two strips to a phone offers more flexibility when you're out and about. And these days, smartphones can cost more than the average desktop PC!

• Would be switching to a simultaneous dual‑band 802.11n AirPort Express correct problems with connectivity MacBook Air Wi - Fi

  Right now I use an old AirPort Express Terminal (802.11 DSSS 1 and 2 Mbps standard, 802 11A, 802.11 g specifications and a 802.11n draft specification) with AirPort Utility Version 6.3.6 (636.5). My MacBook Air (13 inches, beginning 2014) intermittently loses the Wi - Fi connection. Move to a 802.11n simultaneous dual‑band AirPort Express would correct this problem? I'd be better off with an Airport Extreme?

  AirPort Express frequently asked questions (FAQ) - Apple Support

• Spectrum 360 x: Intel (R) Dual Band Wireless problem - unable to connect to WiFi

  Hi, I have problems connecting my laptop to the Internet. The laptop even can't detect wireless networks (despite other devices being able to do), even if it wasn't a problem beforehand. I have troubleshooted and received the message "card Intel (r) Dual Band Wireless-N 7265 problem driver - or related to the material." so I tried to search through the forums. Unfortunately, I couldn't find a solution other than to go to the Device Manager. Under "Network adapters", the Intel (r) Dual Band Wireless AC7265 reports a problem (he has a!). It indicates the status of the device is "this device cannot start. (Code 10). {Operation failed.} The requested operation failed. "Before that, I remember it to be 45 Code, something about the material being not connected.
  
  I've been to events where it says that the device has been installed but also that "Driver Management concluded the process to install the driver... (..) with the following status: 0x0. »
  
  I think that this problem was caused yesterday when I closed my laptop - I think it was set up the device / through a kind of update when I forced stop it (the screen was black and I didn't know at the time it was the configuration) and that's when I had problems connecting to the Internet. When I went into Device Manager, it says just something on the device requiring an additional installation, but after reviewing all possible solutions on the forums, it has become a Code 10. I tried to update the driver software, but it says ' window has determined the software driver for your device is up to date ", restart the Internet modem, reboot the laptop, the laptop everything, ranging from recovery reset - all with no avail. Sorry for the very long and detailed post, but if someone could please help, I would appreciate (this is the only laptop I currently and about a week). Thank you!

  Hello:

  Please provide detailed information.

  Here's what I recommend.

  Download the latest wlan driver Intel 7265 AC.  The 2nd driver on the left side of the page is what you want.

  Transfer the driver on your PC with a usb flash drive.  Do not run the file again.

  https://Downloadcenter.Intel.com/download/25603/Intel-PROSet-Wireless-software-for-Windows-10

  Go to Device Manager and right-click on the problem Intel wireless network adapter.

  Select uninstall and check the box uninstall driver.

  Restart the computer and install the latest driver, you just downloaded and see if that solves the problem.

• ENVY 700-410xt: dual band wireless network card works in my PC?

  Hello

  I would like to replace my Broadcom BCM43142 802.11bgn single band card with a dual band card. I spent a few hours struggling with online help, nothing helps. So called technical support, answered many questions, I was told I would be transferred to the right technology and got cut.  Can someone tell me a name/model number of a Bluetooth 4.0 integrated 802.11a/b/g/n/ac card and LAN wireless dual band (2.4 GHz and 5 GHz) featuring MIMO 2 x 2 technology, or how do you know which card will work?  Thank you very much.

  Dave, welcome to the forum.

  This is a Wireless card that meets you specifications.  I have in my game Omen HP laptop and it works fine.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Crash computer after installing Netgear N600 Wireless Dual band Router WNDR3400. My detail of error says I may need to update my BIOS to 8400 has 09 but I can't seem to download the desktop to install.

  My computer crashes after I installed the Netgear N600 Wireless Dual band Router WNDR3400.   I uninstalled and then reinstalled, but my home computer still crashed.  My detail of error says I may need to update my BIOS to 8400 has 09 but I can't seem to download the desktop to install.  Any suggestion?

  Hi JudyWinn,

  If you need assistance for updating BIOS (Basic Input Output System), I recommend you contact the manufacturer of your computer to update the BIOS (Basic Input Output System) & check if the problem persists.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information.
  Please post back and we do know.

• No Bluetooth on Latitude E5540 although Wifi works (Intel Dual Band AC-7260 BT + Wifi)

  Hello

  as indicated, I can't do the bluetooth on my laptop E5540, although the chip works fine (Intel Dual Band AC-7260 BT + Wifi). I do not use so much so I discovered a few days ago:

  Win7 showed an "unknown device" which was clearly referring to BT

  After a round of Microsoft/Dell/Intel updates, there is no more 'unknown devices' but still no trace of BT (as you can see in the following image).

  Help?

  Thanks in advance

  Hi Brad,

  Thanks for the tips. I have indeed tried everything and more, but no bluetooth device was visible... I finally checked the BIOS, and we are here:

  SOLVED.

  The question was in fact related to an option: "want you as the physical button on the left to control: wifi, wifi + bluetooth...» ». I probably suddenly unchecked bluetooth, there is no more way to power it on.

  Thank you

• YouTube & router WRT610N

  Hi everyone, [Hi Dr. Nick!]

  Sorry, my teacher of 6th grader always taught me to open with a joke and well... as you can tell I'm not an actor.

  anyway... first time poster, long user date Linksys. Recently bought a Linksys WRT610N wireless router. It is up and working well, or so I think only. All of a sudden I noticed a bit of lag on YouTube. This has never happened before, and now it seems that every video I play is extremely agitated. Not only that, but sometimes I'll click on a video and it says it transfers data in the lower left corner of the screen (in the status bar), but after he allegedly did load the data, nothing happens. The video will not play. But... If I drag the progress a little indicator to the right, the video starts to play; only to be stopped at a party later in the video (due to late I guess) and the video just freezes completely after that. The bright red progress bar that indicates the video is fully charged stops charging. I speak not of the dark red progress bar, but behind it. Check out a video on YouTube and you'll see what I mean.

  BTW is the computer on that happening my computer in the basement, which is connected to the wireless router. I did some research on this forum, but the only information I came across what for my router wireless (WRT610) & YouTube was involving uploading to YouTube. I don't know I have the right settings (but I could be wrong here as I am new to wireless routers). Does anyone have an idea why this is happening?

  Hey guys,.

  I wanted to thank you guys for your help (I like it). I don't think that the Linksys WRT610N is the router wireless for me. I couldn't go beyond freezing on me and the constant decline signals of YouTube videos. I decided to call two friends and ask for their help.

  I asked them to surf on YouTube and I would like to know if they have problems (this was done in real time that I've been waiting). Two of them said that everything was fine. I then gave him another go myself, but who has experienced the same problem. Then I decided to take a trip to Future Shop and bought another router; another brand. It is not a double router broadband, just to let you know.

  I plugged the router exactly in the same way I did the Linksys WRT610N and guess what? The signals are beautiful, YouTube works like a charm, and I'm not being disconnected every two minutes. I'm not denigrating Linksys, because I only got the router wireless for 2 days. But one thing is very clear to me, the WRT610N certainly had some problems with it; mine did at least.

  I guess that dual-band is not as high on my wish list feature is.

  Thanks again for your help guys.

  (Mod Note: under the guidance of the compliance of the directive.)

• How to set up the AppleTV on WiFi dual band network

  Hello

  At home, I have a modem/router double band in a Hitron CGN3 installed, providing 2.4 G and 5G wifi access. However, the dual band seems not suitable for airplay, because they cannot communicate with each other via the double frequencies.

  Devices in the House:

  AppleTV (3rd generation): 5 g

  iPhone 5 s #1 (version 9.3.4): 5 g

  iPhone 5 s #2 (version 9.3.4): 2.4 g

  Audio/video receiver: Wired Ethernet

  #1 laptop (windows 7, latest iTune): 2.4 G

  #2 laptop (windows 7, latest iTune): 2.4 G

  Questions and facts of communication:

  • iPhone 5 s #1 (on 5 G) can reach AppleTV (on 5 G) - very well, but the iPhone 5 s #2 (in 2. 4 g) cannot see the AppleTV (on 5 G)
  • All iPhones and iTunes on laptops can see the AV receiver (on Ethernet cable)
  • All iTunes on laptop computers (about 2. 4 g) cannot see the AppleTV (on 5 G)

  In my view, that airplay should work in the same network. All my devices to connect to the same router/modem, just using WiFi dual bands. Could you please tell how to configure to activate devices on 2.4 G to see on 5G AppleTV using airplay? Except the resolution that I have to put all devices on 2. 4 g. My laptop does not support the network of 5G, BTW.

  Thank you very much.

  Po

  Had a similar problem with my router Netgear of Virgin in Britain. My router has a network of comments rather than the two strips running on the same network, then the router has isolate traffic from 5 G to 2. 4 g. I connected to the interface of the router and changed the settings for everything, and it works.

  A way to check see if you have different IP addresses on devices ranges. 5g is 192.168.0 and 2.4 g is 10.10.0

• Model 23k300xt want J6s79av #ab: HP wireless 802.11 a/b/g/n/ac dual band Mini card with Bluetooth (R) (2 x 2) and WIDI

  HP Wireless 802.11 a/b/g/n/ac dual band Mini card with Bluetooth (R) (2 x 2) and WIDI

  How do we change this computer to use the 2.4 Ghz for the 5.0 Ghz a wavelength. My Microsoft Surface Pro works on why 5.0 can not this computer there is a double prohibition?

  Help!

  So why didn't it connects to your router on the 5.0 GHz band?

  Did you have to do something special for your other 5.0 GHz Wireless N cards to connect to your router?

  Answer to?  N °

  Then explain to me why you can't connect to the 5.0 GHz with the AC map Strip?

  HP has put the designation of expertise because I have solved thousands of questions from members of the forum, not me.

  It's not my problem if you cannot accept the facts of the case.

  Of course, it's a card dual band.

  On the band of 2.4 GHz and AC on the 5.0 GHz band Wireless N Wireless.

  If you want this map to be able to connect to the 5.0 GHz frequency, then you need to upgrade your router to router dual-band wireless AC.

• A6210 is malfunctioning simultaneous dual band

  Hi all

  I just got this card. I installed the latest drivers from netgear and I can see the connection is established at 866 Mhz. However, it does not connect in simultaneous dual band at all (the main reason I bought this card given). The router is an Asus RT-AC3200 mode simultaneous triband AC3200 so I don't know what am I missing to make this work to full 1.2 Gbps.

  If someone managed to get dual-band simultaneous work at all on this or another adapter? Otherwise I may as well choose an other adapters double broadband cheaper and this return to stock.

  Thanks in advance for your answers.

  I'm not aware of all types of dual-band adapters which simultaneously operate two bands.

• Dual band routers

  I rent currently a double router broadband from Comcast, I pay $10 a month. I went around and around with Comcast internet price. They offer 6 Mbps at $34.99 and then the next step upward is 25 MB/s-$69.99 I. I also have Direct TV which is an absolutely stunning image on all HD TVs in the House. Comcast has fiber optic line on my rural road so the video quality is lower but they insist I'm paying less by consolidating the base with the Internet tv service. I went round and round with them and dropped to the base and found tv service I have would save $6 in FCC fees by paying only for the internet and the double router broadband. My next option is to buy my own router dual-band but I don't know what brand, etc. My House is a brick building with the current router placed at the end of the House in an office where the MBP is using 5 ghz. I use a keyboard and a mouse bluetooth with the Mac. Another room on the same floor has a Windows 10 laptop computer with a wireless printer, and two other rooms have mini geniuses Direct TV on the same floor, which are wireless. The genius of the master TV Live is a lower floor in a family room and I now connected to 5 ghz. There is also a Samsung smart tv and a Sony all the system connected to the network without wire on the lower floor. We have several iPhones and iPads in the House, more heightens. Everything except the Mac and Master engineering are on the 2.4 ghz.  Outside, there is a swimming pool, and the bridge and another in structural steel that need to connect to the wireless network when necessary. Occasionally, I have a lot more portable and connected mobile devices who need. My current router is password protected, and it is a very rural area, so my neighbors needs are much less than mine. So, I need suggestions for brands of routers that work with my devices. I'm not a fool, so I can probably set up a network with a network name and the password of my choice.

  Something to note, twice so far the broken material Comcast last year. The first aircraft was a pain to set up and I needed technical assistance to do this, then he broke and a tech came out and replaced the single band with a double band. Apparently my canton has a problem with the internet service and Comcast has trouble keeping the connected neighborhood.

  I'm not thrilled and shopping online as I like to look at something from all angles and ask tons of questions, then Best Buy will most likely be my choice store. Thanks in advance for any help.

  Any modern router will work. If you want to replace the modem Comcast to ensure that it is compatible with their specifications, I think that no matter what modem docsis 3 will work, but if you ask Comcast they will tell you what to buy. Do not get a gateway (router and modem combined) device. Electronic components fail if you have a gateway device so fails it a router, you need to replace the modem and the router, because they are combined in one device. If you have separate devices and the other fails, you have to replace a defective unit.

• How to connect old router to router new

  I have a dvd player internet which can connect only through a wired connection but my router (verizon wi - fi modem) is in another room.
  I was wondering how I can connect my old router (e2000) wirelessly to another room? Would I have set up as an access point?

  blazex4 wrote:

  I understand. I was wondering if the universal media without wire - ca connector will work also instead of using my old router?

  In my view, a connector of ca wireless media would only connect to a router of AC. What you can do is to get a wireless bridge and put it up as a wireless adapter for your DVD player. The wireless bridge to connect wireless to your router and you can wire your DVD drive to the bridge. To do this, I recommend WES610N (Dual-Band N/entertainment deck with 4 switch ports) Linksys.