Work of the trouble on Sansa Clip Zip

Similar Questions

• Sansa Clip Zip battery does not charge, goes directly to the screen of the song

  It's my third Sansa MP3 players.  The first was a Sansa Fuze with the round button.  Like that one but my husband needed more that I did it I gave it to him.  He is old, but the player is still so today.

  The second was a Sansa Fuze + with the touchpad.  The touchpad has been way too sensitive but I need to play only two songs for sleep therapy while I was fine with it until the battery suddenly stopped charging a few months ago, I posted my problems in the Sansa Fuze + forum.  After trying a few suggestions, I finally accepted that he was a Goner.

  I bought this Sansa Clip Zip 4 G, thinking that should last at least for a while because I use every day.  In fact, I needed only when I had disorders of sleep during the night;  I probably used it once every two weeks or more.  I used my cell phone to the device, had no problems until now.

  The last time that I loaded it was 2 weeks, to 98% full - the thing never indicated 100% while it was a little weird.  In any case, I had problems sleeping two nights ago so I took out the Clip Zip and noticed that the battery still had plenty of juice left.  This morning I checked the battery, he had 68%, but I thought I needed could again tonight so better it load up, just in case where.

  I connected it to my computer, but it did not show "connected" screen  Instead, he went straight to the last song I listened to.  I thought it was weird so I turned off the player then tried again.  Of course, he went directly to the screen of the song.  I noticed that the battery icon was showing 'filler '.  I thought that if I left it connected to the pc long enough IT would eventually deducted.  Two hours later, I checked the computer and it says that the drive battery was dangerously low.  I disconnected and then reconnected and this time he said 98% charged.  I loaded a bit more just in case so I used the player for about 15 minutes and the player turns off.  Plugged into the pc and now it says battery is extremely low, while the last hours do not charge the battery, but it drains pretty!

  My last attempt was to plug into a wall charger and guess what?  He went directly to the screen of the song once again.  Contrary to connect to the computer, I could actually turn off the player but this way does not charge the battery, or.   It's exactly the same problem as my second player, the Sansa Fuze +.

  I bought the last two players from Sansa, simply because I really liked the first which of course had been abandoned a long time ago.  I don't know if I have bad luck or it is just an issue joint Sansa players but one way or the other I don't buy any Sansa more in the future.  He is a big name that comes with the big disappointment!

  You can also try a reset by pressing and hold the power button for 20-30 seconds. Release it and then turn it on normally and see how it behaves.

  By your description of the message "dangerously low" you get then plug it into your computer, which tells me that you use MTP mode on the player (or default automatic default, MTP). MTP mode can be pretty weird; better to use MSC mode unless you have need to PSG for "protected" content or DRM files such as Rhapsody or audio in your library or Audible books. The small "crirically" message is a bug in Windows 7 (using MTP mode) that Microsoft did not consider important enough to fix.

• How can I me floor device works with my sansa clip zip 4 GB mp3 player?

  Device stage seems to be a nice software to sync music from computer to my new mp3 player, but it doesn't seem to be in my new Windows 7 software? What should I download it?

  Or what I need to download (also) on the Sansa Clip Zip?

  Help please..!

  Thank you

  / Leif

  Read here.

  See you soon,.

  Jerry

• Play OGG tracks, freezes my Sansa Clip Zip

  Hello

  I tried that twice add files ogg to my card 32 Gb microSDHC SanDisk Ultra that I use with my Sansa Clip Zip, and the two times my player froze when he tried to play.

  I simply copy/paste ogg files, so I did not use any software to manage the upload. When I download mp3, I usually use the Winamp player.

  Ogg files are soundtrack of games shipped with my purchase on www.gog.com.

  I do something wrong when I download ogg files? Music plays without problem in VLC media player.

  Thank you.

  The Ogg decoder in the sandisk firmware is pretty buggy and really inefficient power. I talked to them years sending a few corrections (they use the standard decoder open source, just a version older and without much optimization), but who worked all the time, they stopped really about adding new things never happened. If you use multiple Ogg files, you should probably watch using Rockbox. I think the battery life is 2 or 3 times longer due to optimizations, and compatibility is much better.

• SANDISK Sansa Clip Zip not recognized by WIN 8

  My SANDISK Sansa Clip Zip MP3 player is not recognized by my WIN 8 machine when I connect it via USB.  It works fine on my other machine WIN 8.  Technical support SANDISK told me that the MTP drivers are missing or corrupted.  How do I find, download and install these drivers from the Microsoft site?  Is it also possible to copy these out of the installation of WIN 8 disk I have?

  OK, so I found that this worked for me on win. 8

  1st: hit 'Windows key' 'X', then click on Device Manager.

  2nd: once it go to Universal Serial Bus Controllers, find "USB Mass Storage Device".

  3rd: hit search and edit the material (something like that)

  4th: there are 2 categories, the first to find the driver automatically, and the second looking for your pc.

  5th: click on the first then wait it should work and then it will say that it is recognized and you can sync your Media Player!

  I hope this has helped! :)

• Organize the Audiobook on Sansa Clip +.

  I'm relatively new to the Sansa Clip. I want to put an audio book on which has a set of 11 disks. I created a title on the drive under audio books. Now I want the title create 11, disk1, disk2, etc. subfolders, to copy the torn in each folder of s to do 11 playlists under the title. That doesn't seem to work. Is this not possible.

  Then I thought about being smart and merged all tore up the files from one disk to do a big mp3 fle (60 + MB) and do this 11 times and copy them under the title and create a playlist. The player doesn't and hung. What gives? Any help wil be appreciated.

  Well, this is what I discovered. Each record indicates that a separate under audio books book. So I changed the label of the album of each disc to the Heading1, Title2 etc and it works. Thank you all for your help. Very much appreciated.

• Charger for Sansa Clip Zip?

  I want to use my Sansa Zip clips as a component of my stereo.  Is there a product that keep the Zip Clip, load it and at the same time allow it to play music in stereo system?

  That Clip Zip only uses a 8.Lorsque micro-USB plug, there is no possible/available docking station. However, you can use it via a cable connector that specializes in port AUX in to your stereo to play through your stereo speakers. It will not charge.

• The Firmware Update (Sansa clip 2 GB) support

  While he was trying to transfer my cell phone to my Sansa Clip audiobook, I get the following error during the file transfer:

  ""It is not possible to obtain the certificate of the device. " Contact the device manufacturer for a firmware update or other measures to address this problem. » » »

  When I try to down load the latest Sansa firmware using the "Sansa Updater 1.2 ' version, I get the following error:"

  «"" The following error has occurred: cannot download the selected files.»»» Please try again later. » » »

  I currently wear farm: 1.01.11 on my Sansa Clip (2.0 GB)

  Can offer you any advice on the correction of such? A firmware update will solve the problem of certificate? Any help would be appreciated...

  DLR

  There is a message at the top of this map with instructions for a manual update. use that to update the firmware, and then in the settings menu use the format command. Try once's done it charging books.

• remove the RockBox Bootloader Sansa Clip Plus

  HOW DO?

  I did what the manual on their site said.

  Download frimware (is this clppa.bin?) original file

  Put it on the player

  Sansa updater does nothing.  says "no editable Sansa product is recognized."

  Rockbox utility cannot remove it. what I am doing wrong?

  Frooties wrote:

  Download frimware (is this clppa.bin?) original file

  Put it on the player

  Sansa updater does nothing.  says "no editable Sansa product is recognized."

  You are actually in the Sandisk firmware while you do this? If the player does not find the Sansa updater, that you're always in rockbox. You must run the firmware from sandisk.

• My Sansa Clip Zip no longer works!

  Hi, even after a solft reset then press again, Carlin in, without reacting!

  What can I do?

  Support said it was a real problem, coincidentally, amazon give me a refund (after 6 months), I just buy a new, hope that it will not faill after a few months...

• Art album Sansa Clip Zip problem

  Hi guys! I'm getting album art to my clip wire zip trouble. I use an application called mp3tag to edit tags and covers of my music files, the problem is that I don't know how to resize (I'm making refers to the 'size' not dimensions) pictures. I read that clipart zip support only album with less than 100 k.  Can someone show me how to solve my problem?

  Thanks in advance!

  Thanks a lot for tapeworm! c: but what happens if I want to just put a cover to the music folder, I think it's a lot of time if I make another folder just for the top lid? Is there another way?

• Best Linux for Sansa Clip Zip media player?

  Currently using Banshee on Linux Mint, but he is not seen my new zip clip. What is the best media player use to manage my music between pc and sansa.

  OK, got it. Set the USB msc mode and its all good

• Sansa Clip Zip takes absurd time to change songs

  I had many problems with my Zip Clip lately, I recently added a single song and then had left during the night to cool the media (I'm not kidding). Now, it takes at LEAST 10 seconds to change songs, it's absolutely ridiculous, and I want to know if theres anyway to fix it. My Zip Clip is the latest version.

  EDIT: I just counted, 15 seconds. FIFTEEN SECONDS TO CHANGE A SONG. It's absolutely ridiculous. The 32 GB is barely half full, he shouldn't be it slow, if anyone can help me I would be really happy if I can also sell this thing and start saving for an iPod or another MP3 player that can actually change the songs with ease.

  I think that there is something wrong with this 'unique' song which is causing the problem. Most likely a problem of ID3 tag. Try to delete this file from the drive (or map) and see if the problems to correct. If so, then you have isolated the problem and know that you need to edit the tag.

  You could also try to remove the card, turn on the player and see if it responds correctly, then turn it off and re - insert the card. Which can sometimes also fruitful.

• Buttons do not work in the case of video clips?

  Hello, I hope someone can help me here. I am trying to create a portfolio site and I'm running into some problems. I built my main site on the timeline and all my work of fine buttons AS is very simple:

  function goForward(event:MouseEvent):void

  {

  if(currentFrame == totalFrames)

  {

  gotoAndStop (1);

  }

  else

  {

  nextFrame();

  }

  }

  next_btn.addEventListener (MouseEvent.CLICK, goForward);

  But when I do video clips of scenes with buttons in them (kids?) to try and simplify the site, BECAUSE does not recognize the instance name of the button in the Clip. I get an error message:

  1120: access of undefined property next_btn.

  I put an invisible button on the mc and gave it the instance name of next_btn and it works but I want to fix the buttons in the MC properly. I think it has something to do with my children, so I have them knocked all over the place, but it still does not work! (I'm kidding). What the hell are mousechildren?

  Is it better to condense a site in video clips and individual images or I would have just a chronology long steers that spans numerous frames?

  Thank you

  strabismus.

  1009 error basically means that your code is something that he does not frame, is it.  Go to your publication of Flash settings and select the option to enable debugging.  When you run the file again, the error message should include a line number to indicate which line is causing the problem.  Your instance names seem to have changed between the first validation and the second, so make sure that you have things named to be agreed between the code and objects.

• Sansa clip zip does not

  I just got this camera and I can't turn it on.

  the display shows "file not found" and shows "USB Plug cable.

  or is this a display of rockbox and a file not found message.

  I tried to hold the switch of power for 20 seconds, but it does not work.

  Help, please

  With the power off, hold down the left button and then plug in USB. Do not release the button until it starts. Once you have a working USB, updated the firmware from sandisk. That will restore the firmware to normal.