Work of WAN t HP Officejet 4500 G510g-m scanner
Dear hp I cannot scan my wan't scanner HP Officejet 4500 G510g-m work what is the problem I press the scan button
This time I can't see the disply no option analysis. Please refer to the documentation for the device to sharp shoot. Press ok pls reply me
If you receive a message about no Scan Options, so it is possible that the software has not been activated for scanning with the printer. Have you opened the Solution Center on the computer and tried to update the scanning to... settings in the settings tab at the bottom right of the window to the solution Center?
So, have you tried running printing HP and doctor Scan? It is an automated tool provided by HP for the many printing/scanning problems. Click here to access the PSDr HP.
I'd also take a look at the troubleshooting steps in the document located here. I hope this helps.
Tags: HP Printers
I have Windows 7 Home Premium 64-bit.
Printer recently started feeding the slightly twisted paper. Top left margin is 1 inch, low page 7/8 in.
This requires it a repair service or can do something to fix this problem?
Welcome to the HP Forums! I understand that your HP officejet 4500 G510g recently started to feed the slightly twisted paper. I'm happy to help with this problem!
I would recommend going through this guide. Image or printed text is twisted or biased. If this does not work, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.
Hope this helps you and have a great day!
I have Officejet 4500 g510g-m connected by USB to a Toshiba laptop that is running Windows 7.
I got and error message "software HP is perhaps not able to scan the destination by default because the software is not available or does not work properly. When a scan of the printer is done using HP diagnostic every thing works fine if I get this error message.
Over time I got the impression that I uninstalled the printer several times and reinstalled, this time when I always get the error scan and sometimes an other error message with error numbers 8, reinstalled [(6,0,-2417319779)] tells me to reinstall the software.
I wonder if the problem with Windows updates. Between updates of Windows I can usually correct the error messages and the printer scanner works fine. This time, I can't solve the problem.
trishred, good for a later use HP made all our software and drivers available through our Web site. Just save the link below and if you need to reinstall the printer on this computer or another just select your operating system and follow the download instructions.
I am happy that this solved!
My Officejet 4500 G510g HP Solution Center opens not once 10 Windows worm 1511 was expelled 12/30/2015. Windows KB3133431 update has been installed automatically on 06/01/2016 and who should have solved the problem, but he did not. I uninstalled my HP software and I ran HP Support Assistant to download the current software for my printer, but that didn't fix the problem either. I checked my HP programs in the control panel and found Officejet 4500 510a-f is installed. But, Officejet 4500 510g-m is what I need. I tried to install the software, g-m , without success. I also tried to uninstall the software from a to f in the Panel, but could not do that either. CCleaner comes with an uninstallation tool, but it also failed. Can someone give me help on how to removie this software (Officejet 4500 510a-f) of a machine Windows 10?
I was able to solve the problem. I downloaded a free trial of 30 days of Revo Uninstaller Pro and with her, I was able to uninstall HP Officejet 4500G510a-f. Once this is done, I managed to install the correct software for my printer. HP Solution Center is back on my desktop and everything works as it should.
I have a HP Officejet 4500 G510g-m all-in-One and Windows 7. Never any problems. In recent years, I have been fax from a dedicated line, separate from my regular telephone line. I decided to save money and my phone line fax. Other that simply move the fax line to a separate socket to the same wall jack as my phone and change the fax number box, is there anything else I should do? I did not move the phone cord to a different port on the fax - should I? I already ran a fax test and passed.
Thanks for any info.
9/29 - I just had a friend try to fax to me. The phone rang and rang even if I set to 2 rings. It's never logged and sent a fax.
9/29 again - I have an answering machine. I changed it to pick up to 4 fires and fax to pick up 6. I had a friend try to fax, it has not been connected. He received my faxesbut that I can't get any sound.
Looks like the problem may very well be Vonage. Since I msgd you I found 6 people with the same problem and none of them have been solved. I'll have to give up and return to the dedicated fax.
Thank you very much, Rich for all your help. It was a pleasure to work with you. It's just a pity that all your hard work has not solved the problem. But at least you know if someone else asks you for help with the same problem and they have Vonage, it's hopeless. Laughing out loud
I have a printer all-in-one Officejet 4500 G510g-m. I tried to install & uninstall several times on A Dell 2.80 core dual processor
with 2.50 GB of memory. With Windows Vista Home Premium 32 bit. Every time he tells me that I can't open the cause of box tool, that it is not connected... Printer, scanner and fax will appear on the control panel. Then, I made a full recovery on my PC and tried to install it again.
It allows to print when you do a copy, page test and wordpad, but not from Windows photo gallery and will not let you check ink levels.
How can I uninstall this thing and get out all the old files and get my right rear register. Also, how can I get this printer to work?
Any help would be greatly appreciated.
I did a microsoft Fix - it for windows tools, I ran a Revo Uninstall, then I did a disk cleanup.
Then I reinstalled the drivers I downloaded from HP and the HP software. The complete program,
Version 13.0. restarted the pc and it would not always print from windows photo gallery, but eventually, I went and bought a 3 feet for the printer usb cable and everything works fine now. I knew that when you scan, you have to scan my documents and then print it. Thanks a lot for your help.
I'm having a problem that gets worse. My OfficeJet 4500 G510g will not print a full page. I have installed the latest updates, verified that it's the default printer, aligned the cartridges 2 or 3 times, cleaned the printheads of 2 or 3 times. but no success in getting it to print an entire page
Thanks for getting back to me.
My suspicion was correct, there is a hardware problem with system of distribution of ink or cartridge.Have you tried these steps in my previous post?
When I try to install the downloaded file (OJ4500vG510g-m_Full_13_en) extracts the Officejet 4500 g510g-m dirver for Win7-64 bit, then a back screen flashes on the screen for a fraction of a second, then nothing else happens.
Don't know what to do at this point.
Thanks for the clarification.
Please try following these steps and check if this may help:
1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
7. run the installation file and check all difference.
If the problem persists, right-click the computer icon and select manage, then open the Device Manager.
Devote the processor category and specify which processor you use on your PC.
I couldn't start my printer HP Solutions program.
I decided to uninstall the program from the printer and then reinstall it.
The re-installation was works well when all of a sudden, an error window appears:
"HP INSTALLER UNINSTALLER HAS STOPPED WORKING.
A problem caused the blocking of the program works correctly.
Windows will close the program and notify you if a solution is available. »
I closed all windows and saw another window indicating that if the uninstallation to be completed, the computer must be restarted. I rebooted and got the following:
"HP Officejet 4500 g519g-m.
Select install to begin the installation of your new HP device".
The only thing I saw was "EXIT".
'INSTALL' never appeared.
All help will be greatly appreciated. Thank you.
Although I appreciate the help, I was able to solve the problem in a different way.
First of all, I decided to try my new copy of the new "HP Support Assistant". The way the program progressed, I began to feel confident that this program would fix all the problems. I'm sorry to say that it did not work in my case. I finally had to re - install completely the C drive, up to five days. It works beautifully. All my problems have disappeared. Thank you all.
I work for four days, try to install it, once again, my Officejet 4500 full package. And the frustrating thing is that the installer says that all of the software, with the exception of imaging and web printing, is installed. This includes the Solution Center. Yet, the center of Solution is not found anywhere else on my system.
I work with a Windows 7 Ultimate A55MH; 2.90 GHz AMD A8 - 3850 APU with graphics card Radeon HD;
cache 512 KB memory primary; cache memory secondary 4096 kilobytes; Tip: BIOSTAR Group A55MH
The bus clock: 100 megahertz; UEFI: American Megatrends Inc. 4.6.4 10/04/2011.
2479.86 GB drive hard usable capacity
1149.13 gigabytes of free disk space
ASUS DRW-24B1ST c ATA Device [scanner]
ATAPI iHAS124 D ATA Device [scanner]
Portable Seagate USB device [hard drive] (500,11 GB)
ST3160815AS [hard drive] (160,04 GB)
ST500DM002-1BD142 [hard drive] (500,11 GB)
WDC WD10EALX-009BA0 [hard drive] (1000,20 GB) - Windows 7 Ultimate disc...
WDC WD3200JS-22PDB0 [hard drive] (320,07 GB).
There is no reason that my system should not be qualified to run this printer/scanner and all software fair that goes with it. So, what, according to you, is the question? Is it me, or is this HP? Please, be honest with your answer...
Thanks for letting me know that the printer installed correctly on other computers.
Follow this post from @SuperMario1 to remove the printer files from the registry.
It's a different model, but it provides instructions to dig dip into the registry and get all of the HP software from the system.
You can also run the Microsoft Fix it Tool to the problems that programs cannot be installed or uninstalled.
Let me know the results.
Ho da it software mio Officejet 4500 sul mio portable windows 7 using it CD con Bolivia the stampante.
ORA ho un nuovo con Windows 10 e non posso usare lo stesso CD laptop computer perched quando sommergibili if starts not it pulsating e "Installation."
Stampante e elencata nel pannello di controllo sezione stampanti, my non è modo di utilizzare lo scanner dei documenti fax send ed.
Come faccio ad installare it sul present della stampante con Windows 10 CD software?
Come faccio ad utilizzare lo working fax di questa stampante e scanner?
I'd love to help you! I see that you are unable to install your printer on your computer running Windows 10. Download and run the HP printer install wizard for Windows
The HP printer for window installation wizard was created to help Windows 7, Windows 8, and users Windows 8.1 download and install the latest and most appropriate HP software solution for their HP printer.
If this resolves the problem well would be wanting to click on Accept as Solution button so that others who may be affected by the same issue can find what worked for you? Thank you.
I connect to a HP officejet 4500 with no installation disc. I tried to download the driver from HP. All the facilities just advise tht it has stopped working. I downloaded drivers from the HP using Chrome and IE but same problems website. It seems that HP have not all the 'work' drivers available for this printer.
I am aware that I need to not have the usb cable during the installation of the driver. I have now tried the same driver may now so many times I need to uninstall the driver previous installation attempts.
Whatever it is, the HP printer ran out of warranty Nov 2011 so I can't chat directly to HP but conjecture could call them at a cost, but this shouldn't be necessary just to get a working driver.
The code produces the printer seems to be CB867A.
Any advice much appreciated because otherwise it will return in the tray and never with HP.
See you soon
First, click the Start button and type % temp % in the search box.
Open the Temp folder listed.
Remove counter them to this folder by clicking CTRL + and then on the delete key.
This contect is temporary content and can be deleted without any problems.
Then run the OJ4500vG510g_m_Full_13 - in .exe once more.
Once the error appears again, run the fix you listed on your previous post once more.
If it always points to the folder from A to F, open the HP folder newly created in the Temp folder, copy the path and paste it into the patch once it shows the installation path and check any change.
Please let me know if this can help,
I have a HP Officejet 4500 device that cannot do anything requiring the scanner to work, including scanning, copying and faxing. The display shows meanings cannot be made due to a "Scanner failure".
I tried troubleshooting (resettings the device and others) and they did not help. Here are the details:
When I turn on the camera I have here a few mechanical noises (which is natural, it movesthe cartridges and all that) and then, at the end of the power process, the scanner lamp turns on and is moved one inch to the left along the surface scan (below it, in fact), then returns to its place in the extreme right and the error message is displayed.
Device: HP Officejet 4500 G - 501g - m
Mac OS X Snow Leopard (10.6.8), even with Windows 7 64 bit.
Error message: "failed to scan. Unable to scan, copy or send a fax. Press OK. »
No changes were made to the computer or the device, just, it began to arrive one day, a few months after the purchase of the unit.
What can I do to fix this?
It looks like the printer may need maintenance. It must always be in warranty if its only a few months old. If you follow the link below, you can contact HP.
Stampante Ho Una HPofficejet 4500g510g,.
by the prima volta ho usato stessa cartucce Originali my ricaricate...
Can Dell... MENTRE lampeggia it pulsating; Sul display e camera Che sta esguendo Dell MA closed... no fa niente!
Ho tried ha resettarla... iniziando at Una focopia, sul device display "in copia" ma no lo fa...
riceve i Comandi dal calcolatore, not li can...
E ' da 4 anni Che C ' e Ho, quindi senza Assistenza...
No Yes Cosa Posso fare...
If you are using HP original cartridges on your Officejet 4500. Have you tried to clean the contacts of the cartridge and the contacts on the printer?
More details in the link below...
We had for Christmas the HP OfficeJet 4500 G520g. He tells me to connect the all-in-one to the computer with the included USB cable. I looked through everything that came out of the box and there was no USB cord. I can't use the modem cable to connect. I need a USB cord. What can we do about it? I don't want to have to go buy something separately that was supposed to be included.
Please check a small booklet (or a piece of paper) in the box. This brochure should show what is in the box, and believe it or not, many printers now have no USB cable in their boxes, one of the reasons: reduce costs, a normal USB cable can now cost about $10-$15 which contributes to 10% to 15% of the price.
Update: the Guide:
What is in the box of
All-in-One, cartridges (1 black, 1 tricolor), 15 power adapter, two power cords, cable USB (PA only), (PA only) Ethernet cable, phone cord, CD with printer software and user's guide fax guide and poster set-up.
Where do you live? Only AP (Asia Pacific) region's cables in the box.
Maybe you are looking for
IM giving my computer to someone. How it reset to the factory settings?
I have a brand new MacBook Pro 13 "that I have updated to El Capitan and now the app store has problems. In addition it is slower download updates, I won a few updates, showing more than once, even after it has been updated! Here is a picture of what
A few tips on how to upgrade a 3.2.4 opening a CD of retail opening 3.6 under El Capitan? My own experience so far here: After having updated for Snow Leopard to El Capitan my 3.2.4 opening that I bought at Apple in 2010 is no longer in effect. It is
I bought a Probook 4530 s with an Atheros AR5B195 WLAN & Bluebooth card, but I can't find the Win 7 drivers on the support page (or any work of drivers also on the Internet)... I was looking at this page and can not find the necessary drivers: http:/
Hi I have a dell latitude d610, which has windows xp pro. Yesterday I reformatted my computer for the first time and I noticed I had 3 partitions. 1 drive c with the current version of windows, the other was a small FAT partition that I deleted (I no